SMB backup fails - Invalid or uninitialized partit...

former_member199632 · ‎02-14-2015

Hi,

In our system scheduled SMB backup starting to fail.

It shows an error like this;


BR0278E Command output of '/usr/local/bin/bcv/SAP-SPLIT.sh /oracle/PRD/sapbackup/.bepvhlli.lst':
NWSegMgr:
Invalid or uninitialized partition found on drive sdx.

You can initialize this disk by answering YES to the following question, but you will later need to commit this change when you exit from evms. Committing this change will cause any existing partition information to be discarded and an empty partition table created on the drive.

If you choose NO, you should exit evms and correct the problem on the drive.

Question: Would you like to initialize the drive and discard any partitions currently on it?
evms_activate: Responding with default selection "No".
NWSegMgr:
Invalid or uninitialized partition found on drive sdw.

But, from the same system we are getting a daily online backup. (using brtools). It is executing successfully

In ths case , What would be the reason to fail the Split-mirror backup?

Is it some issue with the scripts or some issue with the storage

Configuration is as follows;

Backup tool - HP Data Protector & brtools

DB-Oracle 10.2.0.4 , O/S - SuSE

Error log files are attached with this....& looking forward for your guidance

Note - Before the day where SMB backup fails , we have changed a power unit of the EVA server! Will it make an effect to this failure.

regards,

Zerandib

Log---------------------


BR0280I BRBACKUP time stamp: 2015-02-11 05.00.08
BR0315I 'Alter database begin backup' successful

BR0280I BRBACKUP time stamp: 2015-02-11 05.00.09
BR0295I Splitting mirror disks...
BR0280I BRBACKUP time stamp: 2015-02-11 05.06.50
BR0278I Command output of '/usr/local/bin/bcv/SAP-SPLIT.sh /oracle/PRD/sapbackup/.bepvhlli.lst':
#INFO 
#INFO 
#INFO SSSU for HP StorageWorks Command View EVA
#INFO Version: 8.0.0 
#INFO Build: 111307A
#INFO NoSystemSelected> file /usr/local/bin/bcv/Fracture-and-Present.txt
#INFO 
#INFO  deleting file::/logs/cvclienttrace-150206-1.log, file age::4, maxAge::3
#INFO NoSystemSelected> SELECT CELL "SAPERP_EVA4400"
#INFO 
#INFO SAPERP_EVA4400> SET OPTIONS ON_ERROR=EXIT_ON_ERROR
#INFO 
#INFO SAPERP_EVA4400> LS VDISK
#INFO 
#INFO Vdisks available on this Cell:
#INFO   \Virtual Disks\BIN\DBLOCK\ACTIVE
#INFO   \Virtual Disks\BIN\SAPORA\ACTIVE
#INFO   \Virtual Disks\CI\ASCI01\ACTIVE
#INFO   \Virtual Disks\CI\CILOCK\ACTIVE
#INFO   \Virtual Disks\CS\ASCS00\ACTIVE
#INFO   \Virtual Disks\CS\CSLOCK\ACTIVE
#INFO   \Virtual Disks\CS\SAPMNT\ACTIVE
#INFO   \Virtual Disks\DB\ARCH\ACTIVE
#INFO   \Virtual Disks\DB\ARCH\archbcv
#INFO   \Virtual Disks\DB\DATA\ACTIVE
#INFO   \Virtual Disks\DB\DATA\databcv
#INFO   \Virtual Disks\DB\REDO\ACTIVE
#INFO   \Virtual Disks\DB\REDO\redobcv
#INFO SAPERP_EVA4400> SET VDISK "\Virtual Disks\DB\DATA\databcv" WRITECACHE=writethrough
#INFO 
#INFO SAPERP_EVA4400> SET VDISK "\Virtual Disks\DB\ARCH\archbcv" WRITECACHE=writethrough
#INFO 
#INFO SAPERP_EVA4400> SET VDISK "\Virtual Disks\DB\REDO\redobcv" WRITECACHE=writethrough
#INFO 
#INFO SAPERP_EVA4400> PAUSE 120
#INFO 
#INFO SAPERP_EVA4400> SET VDISK "\Virtual Disks\DB\DATA\databcv" FRACTURE
#INFO 
#INFO SAPERP_EVA4400> SET VDISK "\Virtual Disks\DB\ARCH\archbcv" FRACTURE
#INFO 
#INFO SAPERP_EVA4400> SET VDISK "\Virtual Disks\DB\REDO\redobcv" FRACTURE
#INFO 
#INFO SAPERP_EVA4400> pause 60
#INFO 
#INFO SAPERP_EVA4400> SET VDISK "\Virtual Disks\DB\DATA\databcv" WRITECACHE=writeback
#INFO 
#INFO SAPERP_EVA4400> SET VDISK "\Virtual Disks\DB\ARCH\archbcv" WRITECACHE=writeback
#INFO 
#INFO SAPERP_EVA4400> SET VDISK "\Virtual Disks\DB\REDO\redobcv" WRITECACHE=writeback
#INFO 
#INFO SAPERP_EVA4400> ADD LUN 5 VDISK="\Virtual Disks\DB\DATA\databcv" HOST=erpbk101
#INFO 
#INFO SAPERP_EVA4400> ADD LUN 6 VDISK="\Virtual Disks\DB\ARCH\archbcv" HOST=erpbk101
#INFO 
#INFO SAPERP_EVA4400> ADD LUN 7 VDISK="\Virtual Disks\DB\REDO\redobcv" HOST=erpbk101
#INFO 
#INFO SAPERP_EVA4400> LS VDISK
#INFO 
#INFO Vdisks available on this Cell:
#INFO   \Virtual Disks\BIN\DBLOCK\ACTIVE
#INFO   \Virtual Disks\BIN\SAPORA\ACTIVE
#INFO   \Virtual Disks\CI\ASCI01\ACTIVE
#INFO   \Virtual Disks\CI\CILOCK\ACTIVE
#INFO   \Virtual Disks\CS\ASCS00\ACTIVE
#INFO   \Virtual Disks\CS\CSLOCK\ACTIVE
#INFO   \Virtual Disks\CS\SAPMNT\ACTIVE
#INFO   \Virtual Disks\DB\ARCH\ACTIVE
#INFO   \Virtual Disks\DB\ARCH\archbcv
#INFO   \Virtual Disks\DB\DATA\ACTIVE
#INFO   \Virtual Disks\DB\DATA\databcv
#INFO   \Virtual Disks\DB\REDO\ACTIVE
#INFO   \Virtual Disks\DB\REDO\redobcv
#INFO SAPERP_EVA4400> EXIT
#INFO Rescanning /sys/class/scsi_host/host0
#INFO Rescanning /sys/class/scsi_host/host1
#INFO Rescanning /sys/class/scsi_host/host2
#INFO Rescanning /sys/class/scsi_host/host3
BR0280I BRBACKUP time stamp: 2015-02-11 05.06.51
BR0278E Command output of '/usr/local/bin/bcv/SAP-SPLIT.sh /oracle/PRD/sapbackup/.bepvhlli.lst':
NWSegMgr: 
Invalid or uninitialized partition found on drive sdx.

You can initialize this disk by answering YES to the following question, but you will later need to commit this change when you exit from evms. Committing this change will cause any existing partition information to be discarded and an empty partition table created on the drive.

If you choose NO, you should exit evms and correct the problem on the drive.

Question: Would you like to initialize the drive and discard any partitions currently on it?
evms_activate: Responding with default selection "No".
NWSegMgr: 
Invalid or uninitialized partition found on drive sdw.

You can initialize this disk by answering YES to the following question, but you will later need to commit this change when you exit from evms. Committing this change will cause any existing partition information to be discarded and an empty partition table created on the drive.

If you choose NO, you should exit evms and correct the problem on the drive.

Question: Would you like to initialize the drive and discard any partitions currently on it?
evms_activate: Responding with default selection "No".
NWSegMgr: 
Invalid or uninitialized partition found on drive sdv.

You can initialize this disk by answering YES to the following question, but you will later need to commit this change when you exit from evms. Committing this change will cause any existing partition information to be discarded and an empty partition table created on the drive.

If you choose NO, you should exit evms and correct the problem on the drive.

Question: Would you like to initialize the drive and discard any partitions currently on it?
evms_activate: Responding with default selection "No".
NWSegMgr: 
Invalid or uninitialized partition found on drive sdu.

You can initialize this disk by answering YES to the following question, but you will later need to commit this change when you exit from evms. Committing this change will cause any existing partition information to be discarded and an empty partition table created on the drive.

If you choose NO, you should exit evms and correct the problem on the drive.

Question: Would you like to initialize the drive and discard any partitions currently on it?
evms_activate: Responding with default selection "No".
NWSegMgr: 
Invalid or uninitialized partition found on drive sdt.

You can initialize this disk by answering YES to the following question, but you will later need to commit this change when you exit from evms. Committing this change will cause any existing partition information to be discarded and an empty partition table created on the drive.

If you choose NO, you should exit evms and correct the problem on the drive.

Question: Would you like to initialize the drive and discard any partitions currently on it?
evms_activate: Responding with default selection "No".
NWSegMgr: 
Invalid or uninitialized partition found on drive sds.

You can initialize this disk by answering YES to the following question, but you will later need to commit this change when you exit from evms. Committing this change will cause any existing partition information to be discarded and an empty partition table created on the drive.

If you choose NO, you should exit evms and correct the problem on the drive.

Question: Would you like to initialize the drive and discard any partitions currently on it?
evms_activate: Responding with default selection "No".
NWSegMgr: 
Invalid or uninitialized partition found on drive sdr.

You can initialize this disk by answering YES to the following question, but you will later need to commit this change when you exit from evms. Committing this change will cause any existing partition information to be discarded and an empty partition table created on the drive.

If you choose NO, you should exit evms and correct the problem on the drive.

Question: Would you like to initialize the drive and discard any partitions currently on it?
evms_activate: Responding with default selection "No".
BR0280I BRBACKUP time stamp: 2015-02-11 05.06.59
BR0279E Return code from '/usr/local/bin/bcv/SAP-SPLIT.sh /oracle/PRD/sapbackup/.bepvhlli.lst': 0
BR0299E Split/resynchronization of mirror disks failed

BR0280I BRBACKUP time stamp: 2015-02-11 05.06.59
BR0317I 'Alter database end backup' successful

BR0056I End of database backup: bepvhlli.anf 2015-02-11 05.06.59
BR0280I BRBACKUP time stamp: 2015-02-11 05.06.59
BR0054I BRBACKUP terminated with errors

former_member182657 · ‎02-14-2015

Hi Zerandib,


evms_activate: Responding with default selection "No".

Surely an issue with your EVA server here.Could you share results or log file

(may be evms-engine.log) by following command


evms_activate -d debug

I also suggest you to consult with EVA server team for the issue.

Regards,

SMB backup fails - Invalid or uninitialized partition found

Accepted Solutions (0)

Answers (1)

Answers (1)

Re: LTMOM : Rule xxx is corrupt : How to find the ...

Re: DRC e-Cockpit Add a New Button

Goods receipt error

Re: I can't login to my ABAP system as an administ...

Has the SAP Master Data Integration service been d...