TMS and Change Request Mangement Error

[Former Member]

We are using Solution Manager 4.0; My satellite system that I am trying to test is WAS620.

I have followed SAP IMG to configure the basic Change Request Management which is under --> Scenario-Specific Settings --> Change Request Management --> Standard Configuration.

I haven’t done anything on the extended Configurations.

Maintenance Project Name: ZCHARRM

However I ran the /TMWFLOW/CHARMCHK on my Maintenance Project, I get two errors.

Error 1: No Consolidation system found for BWD-100 (project ZCHARRM)

I get this error at "Check System Landscape" at --> Solar_project_admin --> Choose a Project --> System Landscape tab --> Click on the System "System Landscape" icon

--> I get the above error

Please see the attached Screen Shot.

I also get different error in the Change Request tab, when I click on the "Create task list". "The project is not released"

Error 2: No track for project ZCHARRM with log.system BWD/100. Not sure about this error?

Any help would be much much appereciated

Thanks

Kumar

[raguraman_c · Accepted solution]

Hi,

Before we move on to STMS, IT seems there is problem with SMSY/Project.

Please do the following.

In Transaction <b>SLG1</b>, give object <b>/TMWFLOW/CMSCV</b>

1.Did you generat RFC connection for 000 client and your developement system.

2.Please check SMSY Consistency

For Project Cycle click on the refresh button in solar_project_admin tx.

Lemme know the result.

Feel free to revert back.

--Ragu

[Former Member · Accepted solution]

Ragu, I sent you an attachment with all the results that you required long back to your gmail. Please check the email.

Yes I did create RFC connection to client 000 (DEV and QA) box from Solution Manager

My system Landscape has no problem.

Here is SLG1 Logs:

Problem 1:

No consolidation system found for BWD-100 (project ZCHARRM)

problem 2:

No track for project ZCHARRM with log. system BWD/100

Rest of them are green, those two only RED.

Thanks

Suresh

Message was edited by:

Kumar Subramaniam

[raguraman_c · Accepted solution]

Kumar,

Activate Extended transport control by setting System Parameter CTC=1 in all satellite systems.

All the systems in the domain should have the same transport group.

Activate TMS Trusted services in STMS --> Overview --> Systems --> Goto --> transport Domain --> Management Tab page --> Security option group box.

--Ragu

[Former Member · Accepted solution]

I did this as well. still same error.

Kumar

[Former Member · Accepted solution]

Hey Kumar,

Lets consider that you have TIM:100 TIM:200 and TIM:300 as your Development, test and Production systems respectively in your logical component.

Now Excecute solar_project_admin and open our maintenance project.

Go to system and then go to System landscape and then click on system role assignment..

Select the desired system role and click on details, now here you have to set system roles types as <b>Source</b> for Development system TIM:100 and <b>Target</b> for TIM:200 and TIM:300..

Alternatively got to SMSY and open the desired logical component (which you use on your Project) and then go into the details of system roles..

Now proceed as obove..

Since i dont have access to system, i cannot tell you the Exact path..

Just Remember one thing,

Development System should be Source System( Not single which is default).

Test and Prod should be Target systems and this must be consistent with the TMS of Satellite system as well..

Follow these i hope then your problem wil be solved.

Reward points for usefull answer..

[Former Member · Accepted solution]

Thank for you respond Suzzane. on you reply you asked to "Click on Details" for system role, however there isn't any button or options to click for details. All I see Insert, Delete, move up and down and System roles button. Please shoot me an email to subramks@gmail.com, I will send you an screen shot of all the settings.

Let me know if you need to know anything else.

Thank you in Advance

Kumar

[Former Member · Accepted solution]

Suzzane,

Quick question? Do I need to have 3 system Landscape, DEV, QA, PROD. This is what I have:

I am using BW 3.1 Content to test the Change Request Management. We have 3 system Landscape.

BWD (DEV)

BWQ (QA)

BWP (PRO)

However, I am only using BWD and BWQ to test the Change Request Management,

Since I am not allowed to use BWP-Production to system to test. I was left with BWD and BWQ to test. I am testing this on our Solution Manager 4.0 Dev box (SMD).

Let me know please?

Kumar

[Former Member · Accepted solution]

Hey Kumar,

Will ping you shortly, Currently little busy,

Minimum 2 tier sytem landscape is desired..

Send screenshots to suzanne_dsouza@rediffmail.com.

Message was edited by:

Suzzane Dsouza

[Former Member · Accepted solution]

I just sent you an email with all the screen shots.

Thank you so much.

Kumar

[Former Member · Accepted solution]

Hi Kumar,

Have you defined the systems in transport route as client specific?.Please chek on this.Once they are client specific,when you see the transport route in STMS overview,you can see the client number appearing between the line that connects DEV and QUAL,QUAL and PROD.

Reply for any clarification.

Thanks and Regards,

Avinash

[raguraman_c · Accepted solution]

One problem could be, your actual TMS is three system landscape and you want to have only two systems for your ChaRM.

Feel free to revert back.

--Ragu

[Former Member · Accepted solution]

Ragu,

I thought the same thing. Then I added my 3rd system as well. So now I have DEV--> QA --> PROD. Three different systems. Now I get these errors.

"Message from function module /TMWFLOW/CALC_SINGLE_TRACK: No source system"

"No track for project CHAGREQMAN with log. system BWD/100"

"Message from function module /TMWFLOW/CHECK_PRJ_CONS: No export system for BWP-100" --> I checked all my RFC and TMS connectioons and system roles. Everything looks fine to me.

Please let me know if you can direct me anything for above errors.

Thanks

Kumar

[Former Member · Accepted solution]

hey kumar,

Let me know the result of execution of \tmwflow\charmchk..

After this is done, the log which is displayed.. look for "CHECK TMS" if thats green then TMS configuration is fine..

Your problems points to logical component issues.

Follow this steps..

1)go to smsy.

2)Got to the logical component which you have used in your maintenance project.

3)ON the tab, current system assignment, click on system roles..

Now type of the roles is very important..

a)The Type of the role for devlopement system should be SOURCE system.

b)The Type of the role for quality system should be target system.

c)The Type of the role for production system should be system should be "production systems" system.

Rewards points for usefull answer.

[Former Member · Accepted solution]

Hi Kumar,

We had a similar problem.Check whether you have made the systems as client specific.For doing that Click(on STMS->system Overview->Transport Overview) on the quality/production client and go to transport rout,check whether the client is specified.

If you want more details,give me your mail id,i can forward the shapshots.

Check this first and if not solved go for other areas.

I hope this will solve the issue.

Revert back for any clarification.

Avinash

[Former Member · Accepted solution]

Could you please send me an screen shot of your target system TMS, to subramks@gmail.com

Thanks

Kumar

[Former Member · Accepted solution]

Aivansh,

Do I need to create IMG Projects for all 3 systems? In the solar_project_admin --> System Lanscape tab --> IMG Projects -

I only create IMG Project for Dev system? How about NQA or PROD?

I am getting this error:

solar_project_admin --> System Lanscape tab --> Change Request Tab --> Show Project Satus Switches:

I get this error "Current switch information is not available f

least one system"

Do you know anything abt this?

I solved this problme on my own. APPlied note: 820801

Message was edited by:

Kumar Subramaniam

[Former Member]

Hi All

I have same problem ocurrers plese can u send me screen shots

regards

[Former Member]

Dear Avinash

Could you please send me the screenshots of STMS with client settings ?

Thanks

Rajan Samuel

[Former Member]

Hey Kumar,

HOw did you solve the previous problem,

No consolidation system found,, No track for the project and so on..

Was my post usefull.

Please mention how did you solve those problem..

This is certainly help many..

Regards,

Suzanne.

[Former Member]

Suzzane,

Like Avinash mentioned, I just setup my transport route as client specific settings. Thats all I did. All of my errors are gone thereafter. Hope that helps.

Jumar

[Former Member]

Hi all. I have problem like this. (No consolidation system found for SM4-001 (project TESTCHARM) and No track for project TESTCHARM with log. system SM4/001). How i must configure TMS routes, that has is work correctly? Or please mail me u snapshots k.nozdrin@breg.com.ua

SM4:001 DEV

SM4:300 QAS

ER5:001 PRD

I have create consolidation route from SM4:001 to SM4:300 with layer ZSM4 and transport route from SM4:300 to ER5:001. Then i check consistensy STMS return "OK". And when i check in solar_project_admin->TESTCHARM->SolutionLandscape->ChangeRequestManagement i have an error accured.

May i create virtual system to DEV, QAS, PRD system?