on 04-04-2007 7:08 PM
We just upgraded to ECC 60. We are using an ISDN Saprouter still. I cannot get the program to start. It is getting a connection broken error (79). It is saying it cannot reach partner. Yet the partner IP is our Loopback address. I am at a loss and cannot find anything on OSS. Has anyone else encountered problems with SAProuter after the upgrade.
This is what the message looks like. Any help would be greatly appreciated.
ERROR => NiPConnect: SiConnect failed for hdl 0 / sock 3
(SI_ECONN_REFUSE; I4; ST; 127.0.0.1:3299) [nixxi.cpp 2454]
Wed Apr 4 12:03:24 2007
ERROR => RTADMINREQ::sendAdminReq: NiBufConnect failed (rc=-10) [nirout.
pp 5624]
****************************************************************************
LOCATION SAProuter 38.0 on 'SAPDEV.SWIRECC.COM'
Wed Apr 4 12:03:25 2007
ERROR partner '127.0.0.1:3299' not reached
TIME Wed Apr 4 12:03:23 2007
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
Wed Apr 4 12:03:26 2007
RC -10
MODULE nixxi.cpp
LINE 2454
DETAIL NiPConnect
SYSTEM CALL connect
ERRNO 79
Wed Apr 4 12:03:27 2007
ERRNO TEXT Connection refused
COUNTER 2
*****************************************************************************
ILEWRAPPER calling saprouter: Nonzero returncode of PASE program. (rc=255)
Hi Tania,
because of ALL these issues, I always do the following: (the issues can be solved but create a lot of headache)
Get a 6.20 or 4.6D SAProuter (in your case, just use the old one) and place it to the new lib SAPROUTER.
Code all other programs, that start the SAPoruter NO LONGER to the kernel lib, but ot the new lib SAPROUTER.
What do you gain ?
- It will run in a few minutes
- It will run stable as you are used to
- It will not be hit by any kernel patches or upgrades
btw:
Have a look at the following web-site in order to learn how to setup the FREE variant via the internet:
http://www.easymarketplace.de/snc-iseries-setup.php
Regards
Volker Gueldenpfennig, consolut.gmbh
http://www.consolut.de - http://www.4soi.de - http://www.easymarketplace.de
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Experts,
Currently Iam facing issue on SAP Router below i run from cmd command.
D:\router>saprouter -n
Thu Oct 28 00:40:14 2010
SAP Network Interface Router, Version 38.10
Thu Oct 28 00:40:15 2010
***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [
nixxi.cpp 2823]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 0 / sock 1912
(SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3299) [nixxi.cpp 2823]
ERROR => RTADMINREQ::sendAdminReq: NiBufConnect failed (rc=-10) [nirout.cpp
5657]
*****************************************************************************
*
LOCATION SAProuter 38.10 on 'crmserver'
ERROR partner '127.0.0.1:3299' not reached
*
TIME Thu Oct 28 00:40:15 2010
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2823
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 2
*
*****************************************************************************
D:\router>saprouter -r -V 2 -K "p:CN=crmserver, OU=0000733362, OU=SAProuter,O=SA
P, C=DE"
trcfile dev_rout
no logging active
WARNING: wildcard character used in route target
-
DEV_ROUT TAB FILE -
-
trc file: "dev_rout", trc level: 2, release: "700"
-
Thu Oct 28 00:45:12 2010
NiHsLInit: alloc host/serv bufs (200/200 entries)
NiIInit: allocated nitab (811 at 00290048)
NiIInit: host/serv bufs already initialized
SAP Network Interface Router, Version 38.10
Compiled Mar 1 2010 01:38:53
command line arg 0: saprouter
command line arg 1: -r
command line arg 2: -V
command line arg 3: 2
command line arg 4: -K
command line arg 5: p:CN=crmserver, OU=0000733362, OU=SAProuter,O=SAP, C=DE
service : 3299
routtab : ./saprouttab
plug-in : no plug-in
-argument: 'no argument'
clients : 800
max servers : 1
quelength : 1
maxheap : 20000000
timeoutL : 5000
tracefile : dev_rout
logfile : no logging active
portrange : no portrange active
local address : default address
SncInit(): Initializing Secure Network Communication (SNC)
PC with Windows NT (mt,ascii,SAP_UC/size_t/void* = 8/32/32)
SncInit(): Trying environment variable SNC_LIB as a
gssapi library name: "D:\router\ntintel\sapcrypto.dll".
DlLoadLib success: LoadLibrary("D:\router\ntintel\sapcrypto.dll"), hdl 0, addr 10000000
using "D:\router\ntintel\sapcrypto.dll"
File "D:\router\ntintel\sapcrypto.dll" dynamically loaded as GSS-API v2 library.
The internal Adapter for the loaded GSS-API mechanism identifies as:
Internal SNC-Adapter (Rev 1.0) to SECUDE 5/GSS-API v2
<<- SncInit()==SAP_O_K
sec_avail = "true"
<<- SncSetMyName()==SAP_O_K
in: myname = "p:CN=crmserver, OU=0000733362, OU=SAProuter,O=SAP, C=DE"
NiBufISetParam: set max heap to 20000000
NiSetParamEx: switch NIP_CONNLOCAL off (not supported by platform)
NiIMyHostName: hostname = 'crmserver'
main: pid = 344, ppid = 0, port = 3299, parent port = 0 (0 = parent is not a saprouter)
NiICreateHandle: hdl 0 state NI_INITIAL
NiIInitSocket: set default settings for new hdl 0 / sock 1900 (I4; ST)
NiITraceByteOrder: CPU byte order: little endian, reverse network, low val .. high val
NiIBind: hdl 0 bound to 3299 (IP only)
NiIBlockMode: set blockmode for hdl 0 FALSE
NiIListen: state of hdl 0 NI_LISTEN
NiIListen: listen for client requests on hdl 0
reading routtab: './saprouttab'
NiIGetServNo: servicename '3200' = port 0C.80/3200
NiIGetServNo: servicename '3200' = port 0C.80/3200
NiIGetServNo: servicename '3200' = port 0C.80/3200
NiIGetServNo: servicename '3200' = port 0C.80/3200
NiIGetServNo: servicename '3389' = port 0D.3D/3389
NiIGetServNo: servicename '3389' = port 0D.3D/3389
NiIGetServNo: servicename '50003' = port C3.53/50003
NiIGetServNo: servicename '3299' = port 0C.E3/3299
contents of routtab ('./saprouttab', 10 entries):
KT, p:CN=sapserv2, OU=SAProuter, O= 194.39.131.34 ffff:ffff:ffff: * *
KP, p:CN=sapserv2, OU=SAProuter, O= 192.168.3.242 ffff:ffff:ffff: 3200 *
KP, p:CN=sapserv2, OU=SAProuter, O= 192.168.3.232 ffff:ffff:ffff: 3200 *
KP, p:CN=sapserv2, OU=SAProuter, O= 192.168.3.233 ffff:ffff:ffff: 3200 *
KP, p:CN=sapserv2, OU=SAProuter, O= 192.168.3.62 ffff:ffff:ffff: 3200 *
KP, p:CN=sapserv2, OU=SAProuter, O= 192.168.3.242 ffff:ffff:ffff: 3389 *
KP, p:CN=sapserv2, OU=SAProuter, O= 192.168.3.62 ffff:ffff:ffff: 3389 *
KP, p:CN=sapserv2, OU=SAProuter, O= 192.168.1.4 ffff:ffff:ffff: 50003 *
P, 0:0:0:0:0:0:0:0 0:0:0:0:0:0:0:0 194.39.131.34 ffff:ffff:ffff: 3299 *
P, 0:0:0:0:0:0:0:0 0:0:0:0:0:0:0:0 0:0:0:0:0:0:0:0 0:0:0:0:0:0:0:0 * *
NI-ROUTER LOOP ********
-
SAPROUTTAB FILE -
SNC connection to and from SAP
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
SNC connection to local system for R/3-Support
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.3.242 3200
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.3.232 3200
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.3.233 3200
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.3.62 3200
SNC connection to local WINDOWS system for WTS, if applicable
Windows server: 192.168.1.2
Default WTS port: 3389
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.3.242 3389
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.3.62 3389
SNC connection to local Portal system for HTTP URL access, if applicable
Portal server: 192.168.1.4
HTTP Port: 50003
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.1.4 50003
Access from the local Network to SAP
P * 194.39.131.34 3299
P * * *
Deny all other connections
#D * * *
-
Above files iam sending appreciate and Thankful to you .. Please help me.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
85 | |
10 | |
10 | |
10 | |
7 | |
6 | |
6 | |
5 | |
4 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.