SOLMAN_SETUP Managed System Configuration issue "The definition of Technical System ABAP is not correct"

[sanjiv]

Hi Experts ,

I am configuring solution manger 7.1 & now I am on managed system configuration step 11 check configuration .

when i execute this activity its giving some error .

The definition of Technical System 'SOL~ABAP' is not correct: 'SOL~ABAP': Operating System 'Windows NT~6.2' of Host 'solmgr' must have at least one Software Component Version.

please find below screen shot for your kind reference.

I have check  SAP Note 1611483 but unable to solve this issue.

Please guide me what step was i configured wrong or was i missed .

as per my knowledge i have checked many things  but all is fail.

i am stuck on this steps .

please guide me .

how to solve this error.

Regards,

Sanjiv

[sanjiv]

Hello Upendra ,

My issue has been resolved ..now i have successfully done system preparation, basis configuration & managed system configuration of Solution manager .

Now I am closing this thread ...

Thanks all of you for your kind help ..

Regards,

Sanjiv

[Former Member]

Hi Sanjiv,

Kindly share the results, is your issue resolved ?

Best Regards,

Upendra

[sanjiv]

Hi Upendra Sir,

Good Morning ..

Yes my issue has been resolved I was enter wrong HTTP port for massage Server into step 5 "Enter Systems Parameters"..

I was entering 50000 Port before ,but actually its 8101...So I correct the same ..

I also read SAP Note 1678469 -find right port & correct the same.

I have also completed managed system configuration for JAVA stack..

I am only find some ST-PI & ST-A/PI  not the required software component for ABAP system.

Please find the below screen shot.

please let me how can i upgrade the same as per requirement.

Thanks & Regards,

Sanjiv

[Former Member]

Hi Sanjiv,

As your initial issue got resolved, could you please close the thread with resolution points, thank you.

For ST-PI/ST-A/PI update, kindly execute se38  -> RTCCTOOL and follow the instructions recommended in  RTCCTOOL/SAP Notes, please open new thread if you face any issue, thank you.

Best Regards,

Upendra

[Former Member]

Hi Sanjiv,

Could you adjust the extended id for Java stack in LMDB (SOL00001 - > SOL) and Execute the Verification.

For "500 Connection Timeout" error, it could be different reasons for this issue, kindly look for logs in SM21 or ST22 to find-out the exact root cause.

Best Regards,

Upendra

[sanjiv]

Hi Upendra Sir,

Thanks for your reply.

"500 Connection Timeout" error has been fixed now i am able see managed system configuration page for JAVA system.

all icm parameters is ok . its issue of Sybase  Database Side .

i have manually update index statistics of a table for Sybase ASE database

Thanks & Regards,

Sanjiv

[sanjiv]

Hello Upendra Sir,

if i Could not adjust the extended id for Java stack in LMDB (SOL00001 - > SOL) .

And configured managed system configuration for Java stack with extended id SOL00001 which is assigned by default ..

any issue or not ..???

Please reply i am confuse on this topic.

Please guide me.

Waiting your reply .

Thanks & Regards,

Sanjiv

[Former Member]

Hi Sanjiv,

please follow the below steps to adjust the Java Extended Id same as ABAP stack and kindly let me know if you face any issues while adjusting, thank you.

LMDB -> Technical Systems -> Application Server Java -> SOL00001 -> Edit

then expand the tab "Advanced" - >change Extended ID.

It is good to change the Extended ID same as ABAP stack to avoid unknown issues in future.

Best Regards,

Upendra

[sanjiv]

Hi Upendra Sir,

Thanks for your reply but if i not change ext id any issue ..???

sorry but i already start Java Stack configuration with ext id SOL00001 for Java.

& currently i have configured step 5 ....without any error .

Please correct me if i am doing wrong.

Waiting your reply ..

Thanks & Regards,

Sanjiv

[Former Member]

Hi Sanjiv,

There is no issue, if you execute the Managed System configuration with SOL0001, please continue, thank you.

Best Regards,

Upendra

[sanjiv]

thanks Upendra Sir,

I update you when i will complete or receive any error ..

Thanks & Regards,

Sanjiv

[sanjiv]

Hi Upendra Sir,

I get the following error message during at step 6 “Create Users”  into managed system configuration for Java Stack

Error massage "E: CL_DIAGSTP_MESSAGE:485"

  Failed to connect, P4 port=50004 SID=SOL Instance Number=00
Connection error to SAP System sid [SOL/null], more details about the error in agent 'solmgr' log file (SMDAgentApplication.X.log).; nested exception is:
java.io.IOException: invalid response from message server: HTTP/1.1 404 Not Found(cause=java.io.IOException invalid response from message server: HTTP/1.1 404 Not Found)

Please find below screen shot for your kind reference.

Please tell me what is the issue.

Thanks & Regards,

Sanjiv

[Former Member]

Hi Sanjiv,

Could you please check the below points, thank you.

1) Execute the verification for ABAP/JAVA in LMDB (If you did not performed before),

2) Kindly check the Test URL/Logins in 4th phase of managed system configuration,

3) Restart the Host agent and SMD agents (clean restart) and again the configuration steps,

Best Regards,

Upendra

[RolandKramer]

See  - SAP First Guidance - SEM/BW Modelling in SolMan 7.1 with MOPZ

for additional hints about the topic

Best Regards Roland

[sanjiv]

Hello Upendra Sir,

I didn't find any sub step into (Managed System Configuration -> phase 8 -> Select the "Byte Code Adaptor Installation".)

could you please give me any alternate to check Netwear tab will appear  in wily introscope.

As early i told you that  i have raised a massage to SAP ..yesterday they replied  maybe they will check & troubleshoot  issue today. once my issue  will be resolve i will update you ..

Thank you very much all of you for your help.

Please reply me if any alternate to check Net weaver  Tan into Wily.

Regards,

Sanjiv

[Former Member]

Hi Sanjiv,

Please follow the below steps to get IS Agent status, thank you.

1) Please open Managed System Configuration TAB,

2) Select your Solman System -> Phase 8 (Automatic Configuration) -> Select the "Byte Code Adapter Installation".

3) Then Goto Logs session and click on "SHOW

Click on SHow, it will open as a new IE session, like below,

Kidnly let us know the IS Agent state, thank you.

Best Regards,

Upendra

[sanjiv]

Hello Upendra Sir,

I checked  again but didn't find any sub step into (Managed System Configuration -> Phase 8 (Automatic Configuration) -> Select the "Byte Code Adapter Installation".

Please see below screen shot for your kind reference.

Maybe this step will show in JAVA system configuration & now I am doing manged system configuration for ABAP System.

Please reply...

Regards,

sanjiv

[Former Member]

Hi Sanjiv,

If i am not wrong, Solution manager system is dual stack till now. But as per your screenshot you are checking only ABAP Stack information.

Can you please check and confirm the SLD data is updated form both the stacks. In SLD you should have two entries (One is for ABAP and other is for JAVA).

If you are able to see the data for both the stacks, please open the Managed System setup like below,

All DUAL stack systems should open like below,

Best Regards,

Upendra

[sanjiv]

Yes Sir,

you are right , that solman has dual stack i have also check SLD & have two entries (One is for ABAP

and other is for JAVA).

but maybe I was doing wrong configuration because I have first select ABAP system in Managed System Configuration & click configure system.

i have not select DUAL stack systems into technical scenarios.

Am i right or wrong ..??

if I have done wrong configuration please guide how to correct it or what is next step for me to correct it ...

Please reply upendra sir...

Regards,

Sanjiv

[Former Member]

Hi Sanjiv,

No issues, you can configure the system as you like (First ABAP, then JAVA or Both at a time).

Now Please follow the below steps,

1) Goto LMDB -> Technical Systems -> Select JAVA application servers -> Search for "SOL00001", Then change the Extended ID from SOL00001-> SOL.

NEW Extended System ID: SOL -> click on Execute Change.

Save the Changes, then go to Product systems from LMDB main screen and assign to techinical system.

Execute the Verification and assign the Diagnostic Relevant - > SAVE.

Start the Managed System setup  from Technical Scenarios,

Best Regards,

Upendra

[sanjiv]

Hi Upendra Sir,

Maybe SAP Technical Team will take my remote on today to check the issue.

I will update you & follow your step later ..

Thanks & Regards,

Sanjiv

[Former Member]

Hi Sanjiv,

Did you executed the Managed System setup for Both the stacks, please share the results, if issue got fixed, thank you.

Best Regards,

Upendra

[sanjiv]

Hi Upendra Sir,

Sorry for late response i was stuck into my another SAP ECC issue.

But my has been fixed , SAP replied me & they told me that this issue related to SAP Host Agent Upgrade.

Which I was already applied , but may be its getting more time to update because i am using virtual machine instead of physical server may be its issue of performance or any other background job getting more time to complete or refresh .

but now my problem got resolved & now i start managed system configuration of JAVA stack.

Thanks all of your for your help on this issue.

Regards,

Sanjiv

[sanjiv]

Hi Upendra Sir,

Now i am executing managed system configuration for JAVA stack.

but when i select Application Server JAVA & click configure system

But URL not opening & getting "500 Connection timed out " error

please see below screen shot.

Please help me ...what is the issue.

Thanks & Regards,

Sanjiv

[Former Member]

Hi Sanjiv,

Please set below parameter if not set. It may help you to resolve the issue.

icm/server_port_0 = PROT=HTTP,PORT=1080,TIMEOUT=60,PROCTIMEOUT=600

SAP restart is required.

Regards,

Jaskirat Singh 

[sanjiv]

Hi Jaskirat ,

I am already set  icm/server_port_0  & parameter value as shown below.

PROT=HTTP,PORT=80$$,TIMEOUT=1800,PROCTIMEOUT=1800

for your kind information I have configure managed system configuration for ABAP system successfully there is no issue but when i select Application Server JAVA & click configure system

as show in last screen shot I  am received  "500 Connection timed out " error.

Please let me know what is the issue .

Please reply.

Thanks & Regards,

Sanjiv

[Former Member]

Hi Sanjiv,

As you mentioned in earlier about upgrade of Host Agent,

can you please check below entries are maintained in host_profile file,

service/porttypes = SAPHostControl SAPCCMS SAPOscol

service/admin_users = smdadm daaadm (Note: only one user, which was used for smd agent installation).

After upgrade, did you restarted the Host agent and SMD agents ?

Best Regards,

Upendra

[sanjiv]

Hi Experts ,

I am sharing my  host_profile ....& all required detail alongwith screen shot.

please check & reply.

SAPSYSTEMNAME = SAP

SAPSYSTEM = 99

service/porttypes = SAPHostControl SAPOscol SAPCCMS

DIR_LIBRARY = C:\Program Files\SAP\hostctrl\exe

DIR_EXECUTABLE = C:\Program Files\SAP\hostctrl\exe

DIR_PROFILE = C:\Program Files\SAP\hostctrl\exe

DIR_GLOBAL = C:\Program Files\SAP\hostctrl\exe

DIR_INSTANCE = C:\Program Files\SAP\hostctrl\exe

DIR_HOME = C:\Program Files\SAP\hostctrl\work

service/admin_users = SOLMGR\SAPServiceDAA

and After upgrade, restarted the Host agent manually & also restart the server on OS level.

i also check SAP_LMDB_LDB_* jog in SM37 ..its successfully finished as shown below.

Please see ABAP Message server screenshot from LMDB.

Please also see Managed System configuration, Phase 1, phase 2 and Phase 8 screenshot .

please guide me what is the issue .

i am really stuck on this step . I am troubleshooting last 7-8 days .

I also raised massage to SAP but did not reply till now.

I also requested all of you to share your contact number if possible.

or please call me on my number +91-9729873025.

please help me brothers..

waiting your response ...please reply

Regards,

Sanjiv

[sanjiv]

Hi Experts ,

Please reply on this.

Thanks & Regards,

Sanjiv

[Former Member]

Hi Sanjiv,

As discussed, Could you please edit your Host_profile file with below parameter and take the restart of Host Agent and SMD Agent, then re-try the setup.

File Name: host_profile

Paramter: service/admin_users = daaadm SOLMGR\SAPServiceDAA

And also check your wily introscope, Is your Solman System properly added into wily. If your configured system is apearing or not.

If you are able to see the system in wily, may be you can ignore the current error.

1) Logon to wily -> Investigator ->

Best Regards,

Upendra

[sanjiv]

Hi Upendra Sir,

As per your advise I have modified host_profile parameter as shown below.

service/admin_users = daaadm SOLMGR\SAPServiceDAA

& Restart SAP Host Agent & SMDAgent also I restart my server at OS level.

then I check wily -> Investigator -> I found my solution ,manager entry here as show below screen shot.

Then i again run solman_setup & step 11 check configuration but i received same error.

please reply what i will do now.

waiting your reply ..

Thanks & Regards,

Sanjiv

[Former Member]

Hi Sanjiv,

As of my knowledge configuration is completed and your Solman System is already appear in wily introscopre as well (ABAP Stack info) (As per your screenshot).

Could you please check the IS Agent info and take the Restart (if required),

1) Managed System Configuration -> phase 8 -> Select the "Byte Code Adaptor Installation".

Click on URL -> Show -> it will popup new IE page and shows the IS Agent status (Need Restart or Running).

If status is Need restart, you need to take completed restart of solman.

Then Netwear tab will apear in wily introscope.

and comming to last step error, that just a configuration check, as of knowledge you can ignore this error message as system is appear in wily and able to collect the data, thank you.

Best Regards,

Upendra

[Former Member]

Hi Sanjiv,

For Sync issue, please follow the "Pavan Kumar" suggestion, meanwhile can you please send us the below screenshots, thank you.

1) ABAP Message server screenshot from LMDB (Techinical Instances tab),just want to check message server details are existed or not.

2) Managed System configuration, Phase 1, phase 2 and Phase 8

3) Verification status

Best Regards,

Upendra

[Former Member]

Hi Sanjiv,

I hope i am not confusing you, could you please perform the below steps and let me know the results, thank you.

1) Go to SM51 screen in Managed System and note down the active instances (host names).

2) Logon to SLD system and check all active instances are appear same as SM51 screen.

IMP: Please remove if you find any inactive instance (which does not exists in SM51).

http://<hostname>:<portnumber>/sld

Select Managed System -> Applicaiton servers

Please remove host name, if you find which is not belongs to your Managed System (SM51).

3) Logon to solution manager -> LMDB -> Techinical Instances -> Please remove if you find any inactive instanne (as per SM51/SLD data).

4) Restart the Host agent and SMD Agents (Note: Host agent version should be same on both the systems (solman and Managed System).

then try the Managed System setup, thank you.

Please let us know, if you still facing same issue.

Best Regards,

Upendra

[sanjiv]

Hi Upendra,

Thanks for your reply .

as per your guide i have checked SM51 on managed system .

I found my server host name & status is active please see below screen.

But when I check SLD I did not find any Technical System here. please see below screen

Now what I will do ..

Create New Technical System here or anything else ...because there is no system appear here..

i check all select all technical system type ( Web AS ABAP , Web AS JAVA , Standalone & Third Party etc. ) but nothing appear here .

Please guide me what is the next step for me.

Waiting your reply ...

Regards,

Sanjiv

[sanjiv]

Hi Upendra ,

I have check Landscape Verification Tool & Technical System Editor

Technical System Created & Status is green .

But it not appear into SLD.

please guide me what the issue.

Regards,

Sanjiv

[Former Member]

Hi Sanjiv,

I guess, you are looking the wrong SLD, without SLD data, we can not see the Managed System data in Solman.

You can find the correct SLD System details in RZ70 (here you can find the SLD URL).

Then you can find the your Technical System data using search option and then check the last updated date (If data is not up to date, please trigger the data from RZ70).

Next Goto LMDB -> Select the Technical System -> Advanced -> Syc SLD data from central SLD (Manual sync).

Please share the results, thank you.

Best Regards,

Upendra

[Former Member]

Hi Sanjiv,

Could you please send the below screenshots from LMDB, thank you.

1) Application Servers 2) Message Servers 3) Central Services

Best Regards,

Upendra

[sanjiv]

Hi Upendra ,

you were right i was checking  wrongs SLD Data.

I am able to see Technical Systems into SLD as seen below.

I can see Application Server & message servers also as seen below.

but when i resync data into LMDB I am receiving below error.

Instance referenced in role Antecedent does not exist: SAP_SupportPackageType.Antecedent=ref"SAP_SupportPackage.ElementTypeID=\"01200615321100078506\",Name=\"SAPK-71002INSTBCO\",Vendor=\"sap.com\",Version=  

Instance referenced in role Antecedent does not exist: SAP_SupportPackageType.Antecedent=ref"SAP_SupportPackage.ElementTypeID=\"01200615321100073049\",Name=\"SAPKITLRD5\",Vendor=\"sap.com\",Version=\"0005\  

Instance referenced in role Antecedent does not exist: SAP_SupportPackageType.Antecedent=ref"SAP_SupportPackage.ElementTypeID=\"01200314691100071383\",Name=\"SAPK-10101INSOCO\",Vendor=\"sap.com\",Version=\  

Instance referenced in role Antecedent does not exist: SAP_SupportPackageType.Antecedent=ref"SAP_SupportPackage.ElementTypeID=\"01200314691100069163\",Name=\"SAPKITAS1H\",Vendor=\"sap.com\",Version=\"0001\

please guide me what the issue.

Waiting your reply.

Regards,

Sanjiv

[Former Member]

If the sync is failing, swiftly check the job logs (SAP_LMDB_LDB_*)

[sanjiv]

Hi Pavan,

I have successfully run sldreg -configure slddest.cfg   command

now what i will do ..

Regards,

Sanjiv

[sanjiv]

HI experts,

Please reply on above issue.

i am stuck on this issue .

please help me.

Thanks & Regards,

Sanjiv

[Former Member]

Hope you have performed the following tasks, as per the link

After installing the newest version you need to register using the following command:

sldreg -configure slddest.cfg

Enter your SLD information

Restart the SAP Host Agent - and you are good to go !

Also, check the below ones:

regards,

pavan

[sanjiv]

Hi Pavan,

Thanks for your reply ..

i have check everything as per my knowledge . but all is fail

can you give steps how to run sldreg -configure slddest.cfg  this command.

please reply ...

Regards,

Sanjiv

[Former Member]

Hello Sanjiv,

Generally this issue occurs when the HostAgent is outdated. Check the following links.

1611483 - Solution Manager 7.1 - Outside Discovery Common Error Messages

regards,

pavan

[sanjiv]

Hi Pavan Kumar ,

Thanks for your reply .

But I have check my SAP Host Agent version it ok according to solution manger 7.1 SP04.

Please find below screen shot.

Please reply ...

Regards,

Sanjiv

[sanjiv]

Hi Pavan,

May be you are right its a issue of SAP Host Agent Version.

I have check Landscape Browser .

For more clarification please find below screen shot.

as per above screen short please guide me what  i will do now.

will i update SAP Host Agent Version 149 to latest  ?? or its another issue.

Please reply .. its very urgent for me.

Regards,

Sanjiv

[divyanshu_srivastava3]

In that case you should update your host agent

2103078 - Outside Discovery: Software Component Version for host is missing due to error 'Software C...

[sanjiv]

Hi Divyanshu,

I have update my host agent version to SP 197.

now what i will do i still receive same error.

as shown below .

i have to perform any other activity after up gradation of sap host agent.

Please guide me.

Thanks & Regards,

Sanjiv

[Former Member]

Hi,

I hope you have updated the hostagent to latest version that 200.

Also what is the CIM and CIR content version.

SLD to LMDB job is running ok..?

Regards

Abhishek

[divyanshu_srivastava3]

Hi Sanjiv,

Quickly go and read this sap note:

1799138 - Solution Manager configuration check returns "The definition of Technical System '{SID}~{STACK}' is not correct: '{SID}~{STACK}' : Operating System '{OSName}' of Host '{hostname}' must have at least one Software Component Version"

Regards,

[sanjiv]

Hi Divyanshu ,

As per your suggestion i have check SAP Note 1483508:Solution Manager 7.1: Root Cause Analysis pre-requisites

Also check 1365123 - Installation of Diagnostics Agents

I think all supported patch level is ok as per note .

Diagnostic Agent is ok because  i have use LATEST SWPM for installtion of solman & diagonstic agent .

My CA Willy also compatible according to 1478974 (Enterprise Manger Releases)

but why i am receiving this error may be i was missed step to assigned technical name .

but i don't know the steps .

if you have any doc or any link to configure Technical System name.

please share ......

Regards,

Sanjiv

[divyanshu_srivastava3]

Goto LMDB and check for the hostname used for this technical system and vice-versa.

Also, share the screenshot for both once.

Regards,