on 10-07-2014 3:24 PM
Hi SAP Gurus.
Good day, I'm facing problem when installing SAP ECC 6.0 EHP7 (IDES Version). Its stucked in phase 30 of 35 Check DDIC Password.
Below are the error details:-
ECC Message Box
Unable to open RFC connection to SAP System ECC.
SOLUTION: Start the system.
Then I checked the SAP MMC Console, disp+work.exe stopped.
Below are the dev_disp developer trace.
---------------------------------------------------
trc file: "dev_disp", trc level: 2, release: "741"
---------------------------------------------------
<<- SapSSLSetTraceFile()==SAP_O_K
command line arg 0: D:\usr\sap\ECC\DVEBMGS00\exe\disp+work.EXE
command line arg 1: pf=\\ECC\sapmnt\ECC\SYS\profile\ECC_DVEBMGS00_ECC
sysno 00
sid ECC
systemid 562 (PC with Windows NT)
relno 7410
patchlevel 0
patchno 11
intno 20020600
make multithreaded, Unicode, 64 bit, optimized
profile \\ECC\sapmnt\ECC\SYS\profile\ECC_DVEBMGS00_ECC
pid 3948
Tue Oct 07 22:07:37 2014
kernel runs with dp version 197000(ext=117000) (@(#) DPLIB-INT-VERSION-197000-UC)
length of sys_adm_ext is 500 bytes
***LOG Q00=> DpSapEnvInit, DPStart (00 3948) [dpInit.c 574]
ShmProtect( 5, 3 )
SigIInit: ok (whoami=1)
Thread handle for mainthread created
SigIRegisterRoutine: handler for signal SIGSEGV installed (SigISegv, flag 0)
Pipe created: \\.\pipe\SAP3948
SigIInit: Create Message Thread
SigIRegisterExitRoutine: exithandler installed (DpSigExitHandler)
SigIRegisterTerminateRoutine: terminatehandler installed (DpSigExitHandler)
shared lib "dw_xml.dll" version 11 successfully loaded
shared lib "dw_xtc.dll" version 11 successfully loaded
shared lib "dw_stl.dll" version 11 successfully loaded
shared lib "dw_gui.dll" version 11 successfully loaded
shared lib "dw_mdm.dll" version 11 successfully loaded
shared lib "dw_rndrt.dll" version 11 successfully loaded
shared lib "dw_abp.dll" version 11 successfully loaded
RqQGetMultiCastAddress: Using 224.0.0.129 as IP v4 multicast address
DpCheckMulticast: check of IP v4 multicast address o.k.
mshost: >ECC<
DpSetCancelStrat: set timeout/repetition 0/-1 at level 0
DpSetCancelStrat: set timeout/repetition 5/-1 at level 1
DpSetCancelStrat: set timeout/repetition -1/5 at level 2
rdisp/softcancel_sequence : -> 0,5,-5
softcancel_sequence: >0,5,-5<
use internal message server connection to port 3901
msserv: >3901<
dp_bufreftime: 120 sec
dp_btctime: 0 sec
dp_autoabaptime: 0 sec
dp_bgrfc_watchdog_time: 300 sec
dp_autothtime: 60 sec
dp_autojavatime: 60 sec
dp_autoccmstime: 60 sec
max_dynamic_wp_alive_time: 300 sec
dp_startup_time: 20
dp_noptime: 0 sec
dp_keepalive: 1200 sec
dp_keepalive_timeout: 60 sec
dp_ms_keepalive: 60 sec
dp_ms_keepalive_timeout: 300 sec
switch off dp-keep-alive for old temus
dp_spoolalrm: 60 sec
dp_softcancel_timeout: 5 sec
rdisp/wp_restart_interval : 300 sec
DpISetTrcLog: trc logging active, max size = 52428800 bytes
rdisp/shutdown/load_balance_wait_time: 180 sec
rdisp/shutdown/disable_login : 0
rdisp/shutdown/auto_logout: 300 sec
rdisp/shutdown/trigger_timeout: 180 sec
rdisp/shutdown/idle_wp_timeout: 60 sec
rdisp/shutdown/longrunner_timeout: 86400 sec
rdisp/shutdown/j2ee_timeout: 60 sec
rdisp/high_load_quota: (load / queue quota) = (90.000000 / 5.000000)
rdisp/snapshot(CREATE): DP_CS_RESOURCES_EXHAUSTED
rdisp/snapshot(PERIOD):300 sec
rdisp/snapshot(LINES):10000 lines
DpSetAvoidTraceInSignalHandler: 0 -> 1
DpCommonParamInit: rdisp/core_file_size = default --> no change
NiSrvLGetServNo: got service name 'sapdp00' from operating system
NiIGetServNo: servicename 'sapdp00' = port 3200
NiSrvLGetServNo: got service name 'sapgw00' from operating system
NiIGetServNo: servicename 'sapgw00' = port 3300
NiMyHostName: hostname = 'ECC'
NiHLGetNodeAddr: got hostname 'ECC' from operating system
NiIGetNodeAddr: hostname 'ECC' = addr 192.168.2.1
NiHLGetHostName: found address 192.168.2.1 in cache
NiIGetHostName: addr 192.168.2.1 = hostname 'ECC' (fq)
Tue Oct 07 22:08:01 2014
NiHLGetNodeAddr: hostname 'www.doesnotexist0220.qqq.nxst' not found by operating system
*** WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0220.qqq.nxst) took 24 seconds
Tue Oct 07 22:08:17 2014
NiHLGetHostName: address 1.0.0.1 not found by operating system
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 16 seconds
NiSrvLGetServNo: got service name 'http' from operating system
Looking forward for your replies.
Regards,
Jay
-96-
Hi Jay,
Is the issue resolved? The screenshot you paste here says your oracle is up.
Can you check if the Listener is up and Running?
Please log-in with orasid user and give the command
lsnrctl start
It should return "The Command completed Successfully"
Check Listener status with "lsnrctl status" command
Again start your oracle if needed and then with sidadm user, check the output of R3trans -d as suggested above.
AC
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Jay,
Follow the below steps :
1. sqlplus /nolog
sql> connect /as sysdba
sql> startup
Then retry the steps in sapinst.If it fails again. Then paste the output of the below command
1. echo $ORACLE_HOME
2. echo $ORACLE_SID
3. ps -ef|grep smon
You also need to set up SSFS configuration
With Regards
Ashutosh Chaturvedi
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Ashutosh/Deepak,
Thanks for the replies. I'm getting the following screen after entering the command:-
You also need to set up SSFS configuration
SSFS Implementation for Oracle Database
With Regards
Ashutosh Chaturvedi
I had gone the the link, but the SSFS configuration in the link was based on OS AIX 6.1 but I'm installing it on Windows 7 64 bit.
Do you know the SSFS configuration for Wndow 7 64 bit?
Looking forward for your help.
Regards,
Jay
-96-
Hi Jay
Could you refer the SAP Note of SSFS
1622837 - Secure connection of AS ABAP to Oracle via SSFS
BR
Hi JAy,
Is the ECC system up and running when doing DDIC password check ?
Regards,
Hugo
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Jay
1. Just do the full restart and then start again in the same phase
2. Refer the SAP note for DDIC password 2012989 - IDES ERP 6.0 incl. EHP7
BR
SS
Hi Deepak
Thanks for the fast reply.
1) Ensure hosts file on the server is updated with right hostnames
Below are the contains from ECC_DVEBMGS00_ECC file
SAPSYSTEMNAME = ECC
SAPGLOBALHOST = ECC
SAPSYSTEM = 00
INSTANCE_NAME = DVEBMGS00
DIR_CT_RUN = $(DIR_EXE_ROOT)\$(OS_UNICODE)\NTAMD64
DIR_EXECUTABLE = $(DIR_INSTANCE)\exe
DIR_PROFILE = \\ECC\sapmnt\ECC\SYS\profile
_PF = $(DIR_PROFILE)\ECC_DVEBMGS00_ECC
SETENV_00 = PATH=$(DIR_EXECUTABLE);%PATH%
#-----------------------------------------------------------------------
# Copy SAP Executables
#-----------------------------------------------------------------------
Start_Program_00 = immediate $(DIR_CT_RUN)\sapcpe$(FT_EXE) pf=$(_PF)
Start_Program_01 = immediate $(DIR_CT_RUN)\sapcpe$(FT_EXE) pf=$(_PF)
_CPARG0 = list:$(DIR_CT_RUN)/sapcrypto.lst
Start_Program_02 = immediate $(DIR_CT_RUN)\sapcpe$(FT_EXE) pf=$(_PF) $(_CPARG0)
SAPJVM_VERSION = 6.1.059
DIR_SAPJVM = $(DIR_EXECUTABLE)$(DIR_SEP)sapjvm_6
jstartup/vm/home = $(DIR_SAPJVM)
#-----------------------------------------------------------------------
# Start ABAP database
#-----------------------------------------------------------------------
Start_Program_03 = immediate $(DIR_CT_RUN)\strdbs.cmd ECC
rdisp/wp_no_dia = 10
rdisp/wp_no_btc = 3
#-----------------------------------------------------------------------
# Start application server
#-----------------------------------------------------------------------
_DW = $(DIR_EXECUTABLE)\disp+work$(FT_EXE)
Start_Program_04 = local $(_DW) pf=$(_PF)
#-----------------------------------------------------------------------
# Start internet graphics server
#-----------------------------------------------------------------------
_IG = $(DIR_EXECUTABLE)\igswd$(FT_EXE)
Start_Program_05 = local $(_IG) -mode=profile pf=$(_PF)
rdisp/wp_no_vb = 1
rdisp/wp_no_vb2 = 1
rdisp/wp_no_spo = 1
DIR_CLIENT_ORAHOME = $(DIR_EXECUTABLE)
SETENV_01 = SECUDIR=$(DIR_INSTANCE)/sec
2) Check whether you are able to connect to database using R3trans -d . It it fails share trans.log file
How to connect database using R3trans -d? Can you show me the steps?
Looking forward for your reply.
Regards
Jay
-96-
Hi Jay,
1) You have shared instance profile. I need you to check host file located under C:\drive.
Open start-> run and type drivers
Go to etc-> hosts.
Check whether correct entries are maintained here
2) Login with sidadm user and open command prompt.
type R3trans -d
share the output.
Regards,
Deepak Kori
Hi Deepak,
Below are the trans log file.
4 ETW000 R3trans version 6.24 (release 741 - 10.10.13 - 20:13:08 ).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 07.10.2014 - 23:50:15
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [ dev trc,00000] Tue Oct 07 23:50:15 2014 178 0.000178
4 ETW000 [ dev trc,00000] db_con_init called 86 0.000264
4 ETW000 [ dev trc,00000] set_use_ext_con_info(): ssfs will be used to get connect information
4 ETW000 108 0.000372
4 ETW000 [ dev trc,00000] determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000 44 0.000416
4 ETW000 [ dev trc,00000] create_con (con_name=R/3) 26 0.000442
4 ETW000 [ dev trc,00000] Loading DB library 'dboraslib.dll' ... 69 0.000511
4 ETW000 [ dev trc,00000] DlLoadLib success: LoadLibrary("dboraslib.dll"), hdl 0, count 1, addr 000007FEE8870000
4 ETW000 741 0.001252
4 ETW000 [ dev trc,00000] using "D:\usr\sap\ECC\SYS\exe\uc\NTAMD64\dboraslib.dll" 35 0.001287
4 ETW000 [ dev trc,00000] Library 'dboraslib.dll' loaded 34 0.001321
4 ETW000 [ dev trc,00000] function DbSlExpFuns loaded from library dboraslib.dll 31 0.001352
4 ETW000 [ dev trc,00000] Version of 'dboraslib.dll' is "741.10", patchlevel (0.11) 120 0.001472
4 ETW000 [ dev trc,00000] function dsql_db_init loaded from library dboraslib.dll 32 0.001504
4 ETW000 [ dev trc,00000] function dbdd_exp_funs loaded from library dboraslib.dll 65 0.001569
4 ETW000 [ dev trc,00000] -->DbSlControl(con=-1,cmd=47=DBSL_CMD_IMP_FUNS_SET) -> changed=30, tagset=1
4 ETW000 279 0.001848
4 ETW000 [ dev trc,00000] -->DbSlControl(con=-1,cmd=39=DBSL_CMD_SET_SINGLETASK) 36 0.001884
4 ETW000 [ dev trc,00000] -->DbSlControl(con=-1,cmd=10=DBSL_CMD_DBCA_PTR_GET) 32 0.001916
4 ETW000 [ dev trc,00000] New connection 0 created 25 0.001941
4 ETW000 [ dev trc,00000] 0: name = R/3, con_id = -000000001, state = DISCONNECTED, tx = NO , bc = NO , oc = 000, hc = NO , perm = YES, reco = NO , info = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO , prog =
4 ETW000 67 0.002008
4 ETW000 [ dev trc,00000] -->DbSlControl(con=-1,cmd=10=DBSL_CMD_DBCA_PTR_GET) 43 0.002051
4 ETW000 [ dev trc,00000] db_con_connect (con_name=R/3) 30 0.002081
4 ETW000 [ dev trc,00000] determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000 42 0.002123
4 ETW000 [ dev trc,00000] find_con_by_name found the following connection: 27 0.002150
4 ETW000 [ dev trc,00000] 0: name = R/3, con_id = 000000000, state = DISCONNECTED, tx = NO , bc = NO , oc = 000, hc = NO , perm = YES, reco = NO , info = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO , prog =
4 ETW000 55 0.002205
4 ETW000 [ dev trc,00000] read_con_info_ssfs(): reading connect info for connection R/3 101 0.002306
4 ETW000 [ dev trc,00000] -->DbSlControl(con=-1,cmd=74=DBSL_CMD_CON_INFO_EXT_SUPPORT) -> rc=0=DBSL_ERR_OK, con_vers=0
4 ETW000 76 0.002382
4 ETW000 [ dev trc,00000] read_con_info_ssfs(): DBSL supports extended connect protocol 43 0.002425
4 ETW000 ==> connect info for default DB will be read from ssfs
4 ETW000 [ dev trc,00000] read_con_info_ssfs(): profile parameter auth/shadow_upgrade is not set ==> connect info for shadow upgrade will not be read with an extra upgrade key set
4 ETW000 72 0.002497
4 ETW000 [ dev trc,00000] read_con_info_ssfs(): register callback ssfs_dbi_trace and max level 2
4 ETW000 42 0.002539
4 ETW000 [ dev trc,00000] RSecSSFs: Entering function "RSecSSFsGetRecord" [D:/depot/bas/741_REL/src/krn/rsec/rsecssfs.c 966]
4 ETW000 97 0.002636
4 ETW000 [ dev trc,00000] RSecSSFs: Configuration data read from environment parameters [D:/depot/bas/741_REL/src/krn/rsec/rsecssfs.c 4802]
4 ETW000 52955 0.055591
4 ETW000 [ dev trc,00000] RSecSSFs: Data file "\\ECC\sapmnt\ECC\SYS\global\security\rsecssfs\data\SSFS_ECC.DAT" opened for read [D:/depot/bas/741_REL/src/krn/rsec/rsecssfs.c 2745]
4 ETW000 987 0.056578
4 ETW000 [ dev trc,00000] RSecSSFs: File "\\ECC\sapmnt\ECC\SYS\global\security\rsecssfs\key\SSFS_ECC.KEY" cannot be opened in mode "rb": No such file or directory (errno = 2); at this location, this is not considered an error [D:/depot/bas/741_REL/src/krn/rsec/rsecssfs.c 1260]
4 ETW000 416 0.056994
4 ETW000 [ dev trc,00000] RSecSSFs: Key file "\\ECC\sapmnt\ECC\SYS\global\security\rsecssfs\key\SSFS_ECC.KEY" not found, using default key [D:/depot/bas/741_REL/src/krn/rsec/rsecssfs.c 1603]
4 ETW000 57 0.057051
4 ETW000 [ dev trc,00000] RSecSSFs: Exiting function "RSecSSFsGetRecord" with return code 0 (message: <No message available>) [D:/depot/bas/741_REL/src/krn/rsec/rsecssfs.c 1034]
4 ETW000 619 0.057670
4 ETW000 [ dev trc,00000] read_ssfs_record(): DB_CONNECT/DEFAULT_DB_USER read successfully from ssfs
4 ETW000 42 0.057712
4 ETW000 [ dev trc,00000] read_con_info_ssfs(): deregister callback ssfs_dbi_trace 22 0.057734
4 ETW000 [ dev trc,00000] read_con_info_ssfs(): register callback ssfs_dbi_trace and max level 2
4 ETW000 47 0.057781
4 ETW000 [ dev trc,00000] RSecSSFs: Entering function "RSecSSFsGetRecord" [D:/depot/bas/741_REL/src/krn/rsec/rsecssfs.c 966]
4 ETW000 46 0.057827
4 ETW000 [ dev trc,00000] RSecSSFs: Configuration data read from environment parameters [D:/depot/bas/741_REL/src/krn/rsec/rsecssfs.c 4802]
4 ETW000 111 0.057938
4 ETW000 [ dev trc,00000] RSecSSFs: Data file "\\ECC\sapmnt\ECC\SYS\global\security\rsecssfs\data\SSFS_ECC.DAT" opened for read [D:/depot/bas/741_REL/src/krn/rsec/rsecssfs.c 2745]
4 ETW000 919 0.058857
4 ETW000 [ dev trc,00000] RSecSSFs: File "\\ECC\sapmnt\ECC\SYS\global\security\rsecssfs\key\SSFS_ECC.KEY" cannot be opened in mode "rb": No such file or directory (errno = 2); at this location, this is not considered an error [D:/depot/bas/741_REL/src/krn/rsec/rsecssfs.c 1260]
4 ETW000 393 0.059250
4 ETW000 [ dev trc,00000] RSecSSFs: Key file "\\ECC\sapmnt\ECC\SYS\global\security\rsecssfs\key\SSFS_ECC.KEY" not found, using default key [D:/depot/bas/741_REL/src/krn/rsec/rsecssfs.c 1603]
4 ETW000 60 0.059310
4 ETW000 [ dev trc,00000] RSecSSFs: Exiting function "RSecSSFsGetRecord" with return code 0 (message: <No message available>) [D:/depot/bas/741_REL/src/krn/rsec/rsecssfs.c 1034]
4 ETW000 586 0.059896
4 ETW000 [ dev trc,00000] read_ssfs_record(): DB_CONNECT/DEFAULT_DB_PASSWORD read successfully from ssfs
4 ETW000 66 0.059962
4 ETW000 [ dev trc,00000] read_con_info_ssfs(): deregister callback ssfs_dbi_trace 38 0.060000
4 ETW000 [ dev trc,00000] read_con_info_ssfs(): register callback ssfs_dbi_trace and max level 2
4 ETW000 52 0.060052
4 ETW000 [ dev trc,00000] RSecSSFs: Entering function "RSecSSFsGetRecord" [D:/depot/bas/741_REL/src/krn/rsec/rsecssfs.c 966]
4 ETW000 63 0.060115
4 ETW000 [ dev trc,00000] RSecSSFs: Configuration data read from environment parameters [D:/depot/bas/741_REL/src/krn/rsec/rsecssfs.c 4802]
4 ETW000 108 0.060223
4 ETW000 [ dev trc,00000] RSecSSFs: Data file "\\ECC\sapmnt\ECC\SYS\global\security\rsecssfs\data\SSFS_ECC.DAT" opened for read [D:/depot/bas/741_REL/src/krn/rsec/rsecssfs.c 2745]
4 ETW000 799 0.061022
4 ETW000 [ dev trc,00000] RSecSSFs: File "\\ECC\sapmnt\ECC\SYS\global\security\rsecssfs\key\SSFS_ECC.KEY" cannot be opened in mode "rb": No such file or directory (errno = 2); at this location, this is not considered an error [D:/depot/bas/741_REL/src/krn/rsec/rsecssfs.c 1260]
4 ETW000 404 0.061426
4 ETW000 [ dev trc,00000] RSecSSFs: Key file "\\ECC\sapmnt\ECC\SYS\global\security\rsecssfs\key\SSFS_ECC.KEY" not found, using default key [D:/depot/bas/741_REL/src/krn/rsec/rsecssfs.c 1603]
4 ETW000 57 0.061483
4 ETW000 [ dev trc,00000] RSecSSFs: Data file "\\ECC\sapmnt\ECC\SYS\global\security\rsecssfs\data\SSFS_ECC.DAT" exists, but does not contain the requested entry [D:/depot/bas/741_REL/src/krn/rsec/rsecssfs.c 2769]
4 ETW000 178 0.061661
4 ETW000 [ dev trc,00000] RSecSSFs: Record with key "DB_CONNECT/DEFAULT_DB_CON_ENV" not found in secure storage [D:/depot/bas/741_REL/src/krn/rsec/rsecssfs.c 2772]
4 ETW000 53 0.061714
4 ETW000 [ dev trc,00000] RSecSSFs: Exiting function "RSecSSFsGetRecord" with return code 1 (message: Record with key "DB_CONNECT/DEFAULT_DB_CON_ENV" not found in secure storage <-- Data file "\\ECC\sapmnt\ECC\SYS\global\security\rsecssfs\data\SSFS_ECC.DAT" exists, but does not contain the requested entry) [D:/depot/bas/741_REL/src/krn/rsec/rsecssfs.c 1034]
4 ETW000 281 0.061995
4 ETW000 [ dev trc,00000] read_ssfs_record(): not found is accepted, RSecSSFsGetRecord(DB_CONNECT/DEFAULT_DB_CON_ENV)=1 : Record with key "DB_CONNECT/DEFAULT_DB_CON_ENV" not found in secure storage <-- Data file "\\ECC\sapmnt\ECC\SYS\global\security\rsecssfs\data\SSFS_ECC.DAT" exists, but does not contain the requested entry
4 ETW000 55 0.062050
4 ETW000 [ dev trc,00000] read_con_info_ssfs(): deregister callback ssfs_dbi_trace 21 0.062071
4 ETW000 [ dev trc,00000] -->DbSlConnect(vers=0, type=0, env='[default env]', usr='SAPSR3', kernel dbsl='741')
4 ETW000 223 0.062294
4 ETW000 [ dev trc,00000] DIR_CLIENT_ORAHOME is not set as profile nor env. parameter. 321 0.062615
4 ETW000 Assuming using instant client with unspecified location.
4 ETW000 [ dev trc,00000] Register application info. 115 0.062730
4 ETW000 [ dev trc,00000] Oracle client version: 11.2.0.3.0, (dbsl 741 231113, UNICODE[2]) 11101 0.073831
4 ETW000 [ dev trc,00000] Detailed Oracle client (patch) info not available. 57 0.073888
4 ETW000 [ dev trc,00000] Default connection: tnsname ='ECC' 26 0.073914
4 ETW000 [ dev trc,00000] -->oci_initialize(con=0, char='UTF16', nchar='AL16UTF16', nls=-1),uc_ln=2
4 ETW000 45 0.073959
4 ETW000 [ dev trc,00000] OCIEnvCreate(mode=16384=OCI_UTF16) returned 0 (for default NLS handle)
4 ETW000 20263 0.094222
4 ETW000 [ dev trc,00000] OCIHandleAlloc(OCI_HTYPE_ERROR, con=0, ErrHp=03CF1A38) 87 0.094309
4 ETW000 [ dev trc,00000] OCIHandleAlloc(OCI_HTYPE_ERROR, con=0, ErrBt=03CF2AB8) 35 0.094344
4 ETW000 [ dev trc,00000] NLS env. settings: lang=41004D00450052004900430041004E00 118 0.094462
4 ETW000 [ dev trc,00000] terr=41004D0045005200490043004100 32 0.094494
4 ETW000 [ dev trc,00000] char=55005400460031003600 26 0.094520
4 ETW000 [ dev trc,00000] Client NLS setting (by OCINlsGetInfo(con=0)): 'AMERICAN_AMERICA.UTF16'
4 ETW000 37 0.094557
4 ETW000 [ dev trc,00000] charset='UTF16', ncharset='AL16UTF16', UNI_ASC=FALSE 27 0.094584
4 ETW000 [ dev trc,00000] Connecting as SAPSR3/<pwd>@ECC on connection 0 (nls 0) ... (dbsl 741 231113, UNICODE[2])
4 ETW000 62 0.094646
4 ETW000 [ dev trc,00000] OCIHandleAlloc(OCI_HTYPE_SVCCTX, con=0, svchp=03CF48D0) 35 0.094681
4 ETW000 [ dev trc,00000] Allocating server context handle 30 0.094711
4 ETW000 [ dev trc,00000] Attaching to database server ECC (con=0, svchp=03CF48D0, srvhp=03CF4A70)
4 ETW000 71 0.094782
4 ETW000 [ dev trc,00000] Assigning server context 03CF4A70 to service context 03CF48D0 21982 0.116764
4 ETW000 [ dev trc,00000] OCIHandleAlloc(OCI_HTYPE_SESSION, con=0, usrhp=03D03970) 178 0.116942
4 ETW000 [ dev trc,00000] Assigning username to user session: con=0, usrhp=03D03970 55 0.116997
4 ETW000 [ dev trc,00000] Assigning password to user session: con=0, usrhp=03D03970 50 0.117047
4 ETW000 [ dev trc,00000] Starting user session: OCISessionBegin(con=0, usr='SAPSR3', svc=03CF48D0, srv=03CF4A70, usr=03D03970)
4 ETW000 193 0.117240
4 ETW000 [ dev trc,00000] OCISessionBegin(OCI_DEFAULT) failed with -1=OCI_ERROR 3341 0.120581
4 ETW000 [ dev trc,00000] OCISessionBegin(OCI_DEFAULT) failed with SQL error 1034: 156 0.120737
4 ETW000 [ dev trc,00000] ORA-01034: ORACLE not available 34 0.120771
4 ETW000 ORA-27101: shared memory realm does not exist
4 ETW000 [ dev trc,00000] server_detach(con=0,stale=1,srvhp=03CF4A70) 32 0.120803
4 ETW000 [ dev trc,00000] Server handle (con=0,svchp=03CF48D0,srvhp=03CF4A70) detached 564 0.121367
4 ETW000 [ dev trc,00000] Free server handle srvhp=03CF4A70 of con=0 47 0.121414
4 ETW000 [dbsloci.c ,00000] *** ERROR => CONNECT failed with SQL error '1034' 61 0.121475
4 ETW000 [ dev trc,00000] -->oci_get_errmsg (con=0, rc=1034) 39 0.121514
4 ETW000 [ dev trc,00000] OCIErrorGet() -> SQL error code: 1034 173 0.121687
4 ETW000 [ dev trc,00000] ORA-01034: ORACLE not availabl 43 0.121730
4 ETW000 [ dev trc,00000] ORA-27101: shared memory realm does not exist
4 ETW000 58 0.121788
4 ETW000 [ dev trc,00000] ocica() -> SQL error code 1034,1034 39 0.121827
4 ETW000 [ dev trc,00000] DbSlConnect(con=0) -> orc=1034, 99=DBSL_ERR_DB 34 0.121861
4 ETW000 [ dblink ,00000] ***LOG BY2=>sql error 1034 performing CON 54 0.121915
4 ETW000 [ dblink ,00000] ***LOG BY0=>ORA-01034: ORACLE not available 41 0.121956
4 ETW000 ORA-27101: shared memory realm does not exist
4 ETW000 [ dev trc,00000] -->DbSlControl(con=-1,cmd=41=DBSL_CMD_RELINFO_GET) 49 0.122005
4 ETW000 [ dev trc,00000] -->DbSlControl(con=-1,cmd=14=DBSL_CMD_VERSION_GET) 32 0.122037
4 ETW000 [ dev trc,00000] -->DbSlControl(con=-1,cmd=50=DBSL_CMD_GET_PATCH_INFO) 33 0.122070
4 ETW000 [ dev trc,00000] -->DbSlControl(con=-1,cmd=13=DBSL_CMD_VENDOR_NAME_GET) 39 0.122109
4 ETW000 [ dev trc,00000] -->DbSlControl(con=-1,cmd=52=DBSL_CMD_GET_DBLIB_VERSION) 34 0.122143
4 ETW000 [ dev trc,00000] -> 'OCI_11201_SHARE, 11.2.0.3.0' 32 0.122175
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'ECC'"
Looking forward for your help.
Regards,
Jay
-96-
User | Count |
---|---|
87 | |
10 | |
10 | |
10 | |
7 | |
6 | |
6 | |
5 | |
5 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.