on 09-23-2014 4:07 PM
Hi All,
i had installed ECC 6.0 EHP7 on Windows 2008 std with sysbase .
installation completed sceessfully but getting error on sap gui.
SAP KERNEL: 741_REL
OS: Windows 2008 std
DB: Sybase 15.0
getting rabax error while login to server .
i have checked dev_disp log file and there it is showing network error but my network team is saying there is no issue from network side
"""""
NiHLGetHostName: found address 10.1.0.37 in cache
NiIGetHostName: addr 10.1.0.37 = hostname 'IRIDESSRV01'
NiIRead: SiRecv failed for hdl 396/sock 1220
(SI_ECONN_BROKEN/0; I4; ST; P=10.1.0.37:52814; L=10.1.0.37:3200)
NiSelISelectInt: 1 handles selected (1 buffered)
DpRTmPrepareReq: network error of not logged in client T1_U88, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=DP_CONNECTED
NiHLGetHostName: found address 10.1.0.37 in cache
NiIGetHostName: addr 10.1.0.37 = hostname 'IRIDESSRV01'
DpRTmPrepareReq: client address of T1_U88 is 10.1.0.37(IRIDESSRV01)
DpTmDisconnect: disconnect T1_U88 (state=DP_CONNECTED)
DpTmDisintegrate: clean T1_U88, state=DP_CONN_BROKEN
DpDelSocketInfo: del info for nihdl 396 (pos/type=49/3)
NiICloseHandle: shutdown and close hdl 396/sock 1220
DpGetSchedule: next schedule 1411379274/370000
DpGetSchedule: no schedule found
DpITmSlotRelease: release T1_U88
DpListRemove: remove elem 1 from tmadm_inuse_list
DpListRemove: 2 elems in tmadm_inuse_list
DpListInsert: insert elem 1 into tmadm_free_list (at begin)
DpListInsert: 198 elems in tmadm_free_list
DpLoopExec: DpRTmPrepReq failed
RqQQueueGetNumberOfRequests: Queue <DispatcherQueue> in slot 0 contains 0 requests of type NOWP
DpCalculateAvgResponseTime: avg response time = 0.000000 us
DpGetScheduleInfo: next_schedule at: 1411379274/370000 in 0/906000 sec/usec
DpTimeCheck: act sleep = 906 msec """"
Here i attached log files please refer once and suggest solution for the same
its very urgent
Thanks in advance
Chandra
The time stamp of your screenshot is 22-09-2014 11:47:36 (according to its name), but trace file begin from 22-09-2014 15:17:22. Can you try to log in again and analyze/attach new trace files? Also please read SAP Note 1824283 - Login quiet mode.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Rom,
I have followed the SAP NOTE which you given and i updated kernel and disp+work also.
but getting error so i raised a thread here.
In the log files its showing network error but network team is saying no error from their side.
I didn't understand where went wrong .
could you please suggest some solution .
Thanks
Hi
please update the Kernal and also run SGEN after the same .
Regards
Dishant
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Chandra,
Please update kernel and especially disp+work to latest available and check the results.
Regards,
Deepak Kori
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
85 | |
10 | |
10 | |
9 | |
6 | |
6 | |
6 | |
5 | |
4 | |
3 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.