on 09-11-2014 1:10 PM
Hi Gurus,
I have an incidence where the deliveries did not generate COA for the below output types
Z061/ZMC1/ZMC2.
When i checked the process log - it says as below :
UD has been done with all characeteristic values recorded - but still the above error says that no results found.
Please guide me on this issue.
Hi,
Check to be sure that the results were valuated properly before the UD was made. If that looks OK, then check the results data origin in the profile.
Regards,
John
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi, that's a good sign that it's a problem with the lot used for this delivery. Did you verify the result valuation is correct in the lot?
2nd thing that comes to mind - are you using production chain as source of results? Verify no failed movements in COGI to prevent building the batch where used list.
John,
Results origin are from Batch classification.
Basically Im a PM guy supporting QM also.
Kindly be specific how , where and what to check for the below suggestions :
- Did you verify the result valuation is correct in the lot?
- Verify no failed movements in COGI to prevent building the batch where used list.
Thanks for the understanding....
Mudassar
Hi,
As per Amol, Please go to "MSC3N" and check Classification tab.
Regards,
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
98 | |
12 | |
10 | |
6 | |
6 | |
4 | |
3 | |
3 | |
3 | |
3 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.