on 09-10-2014 9:44 AM
Hello,
I have issue to obtain forecast calculation with Like Profile management.
Here are the settings I would like to have :
Basic settings Family / Product / Location
Like Profile (model) created with Family OR Product.
For exemple
Family : Planes
Product : *
Location : *
Model : Family Cars
I have 24 months of history for Family Cars, which should be fine.
In this case, I dont have forecast calculation, and the following message :
NOT POSSIBLE TO CARRY OUT THE FORECAST, no HISTORICAL DATA.
I made 2 different tests :
TEST 1
Basic Settings Family / Location
Like Profile (model)
=> Forecast calculated
Hi Pierre,
As per the log you have sent it says CVC combination is not available for replacement.
Simple Scenario:
Old products A,B,C
New Products D,E;F
Now what the life cycle planning do we will align the history data as follows.
A data will align to D.( A is source and D is Target)
B data will align to E.
and C data will to F.
For this to be done we need to create CVC's of all products A,B,C,D,E,F in your MPOS.
For ex ,in your case
Combination 1 |
FAMILY 1010 C24 0 |
Like profile: DP & ETLOC |
what is your target combination.
You have define Phase in for your Target combination and phase out Basic combination(i.e. Combination 1).
I think document has all steps clearly defined.Reply if any concern.
Regards,
Nitish Panchal
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
TEST 2 :
Basic Settings : Family / Location / Customer
Like Profile (model) : Family
=> Forecast Calculated
(for these 2 tests, My assignment was Family = Planes and other characteristics = * )
Why I cannot use my characteristic product for the basic settings of my life Cycle management ?
I am blocked ....
Thanks for your help
Pierre
(using SCM7.0 EHP3)
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Pierre,
I am giving you the link for the detaied configuration of Lifecycle Planning.It is below:-
Only one thing to add, if you are using Z chrecteristic like ZMATNR instead of 9AMATNR which is standard one.
You need to go to your MPOS.Choose Extras --> Assign Product/Location.Here give your Z charecteritics.
Rest You can follow this document and in any case you need clarification reply.
Regards,
Nitish
Hi Nitish,
Thanks for your answer.
I checked everything written in the link you sent to me, my parameters looks fine.
Unfortunately, it does not work.
I am not able to generate forecast if my basic settings of the Life Cycle contains my characteristic "product"
How is it possible ??
Thanks in avance for your help
Pierre
For your information, here is my LOG in /SAPAPO/SDP94
Aggregated lifecycle planning is active for like profiles |
Number of basic combinations processed is 3 |
There are 3 like profile assignments for these basic combinations |
Number of like profiles processed is 1 |
LIKE profile DP & ETLOC for characteristic ZFAM used |
Combination 1 |
FAMILY 1010 C24 0 |
Like profile: DP & ETLOC |
Combination 2 |
FAMILY 1010 C24 1 |
Like profile: DP & ETLOC |
Combination 3 |
FAMILY 1010 C24 2 |
Like profile: DP & ETLOC |
Combination 1: No characteristic combination after Like replacement |
Combination 2: No characteristic combination after Like replacement |
Combination 3: No characteristic combination after Like replacement |
Not possible to carry out the forecast - no historical data |
User | Count |
---|---|
13 | |
4 | |
3 | |
2 | |
1 | |
1 | |
1 | |
1 | |
1 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.