on 08-02-2014 7:01 AM
How to configure certificate type and assign certificates during pre-dispatch inspection. Could you kindly provide the process flow. What are the Config data that needs to be considered for the same. is Cust. info record required?
Thanks in Advance.
Regards,
Tam
Ok. Use QC01 to make a certificate profile. In this profile, you select the certificate type (standard and customized) and generally define the logic for picking the value to print on TC and few other parameters like Inspection lot origin
Then use QC15 to assign the above profile to one of the key combinations available (material and customer based)
Then use QC22 to print the Test certificate.
Pl search and do run a few cycles and you should be able to understand the concept.
ntn
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi,
In ECC 6.0 EHP6, most of them are defined for European standards (EN) and if you need to certify material via ASTM, IS, JIS or other standard, you would need to customize it. Thus, it basically provides a pattern, or a format in which you certify the goods.
And please do a bit search and you would find several queries on Quality certificates. Go through them to find more queries and their resolution. That would definitely help you.
ntn
User | Count |
---|---|
108 | |
12 | |
11 | |
6 | |
5 | |
4 | |
3 | |
3 | |
3 | |
3 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.