on 07-22-2014 10:41 AM
Dear Gurus,
- We have already registered our public ip to SAP.
- Saprouter certificate renewed.
- Telnet functions ok
- Saprouttab ok
Saprouter String : /H/xxxxxx/S/sapdp99/H/194.39.131.34/S/sapdp99/H/oss001
Sm59 error =
Connection Error
Error when opening an RFC connection (LB: Hostname or service of the message ser
ERROR: The connection to the specified message server (? / ?) failed. Please
LOCATION: SAP-Server xxxxxx_00 on host xxxxxx (wp 10)
COMPONENT: MS (message handling interface, multithreaded)
Dev_rout file=
NiBufIProcMsg: hdl 1 received rc=-94 (NIEROUT_PERM_DENIED) from peer
What could be the problem ?
Best Regards
hi Kemal,
In your routtab, give * * * and restart your router.
Now, check if this is working or not.
Since rx=-94 means "Connect from source to destination not allowed"
You should do a network test.
Check using telnet and niping.
If all is fine and still getting the error, patch your router to higher level.
Divyanshu
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Mate,
I have already give P * * * , not working same result
Telnet : from saprouter to server 3300 3600 3200 telnet is ok
from server to saprouter 3299 telnet is ok
from saprouter to SAP 3299 telnet is ok
Should i do niping test ? could you please give some more information about it ?
if all is fail, maybe reinstall with last patch will be good idea
Regards
Hi Kemal,
Also have a look for SAP Note 1009304 - No SNC connection set up by SAProuter despite 'KT' entry
Hope this will be helpful for you.
Regards,
Gaurav
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Kemal,
Please share connection SAPOSS test result from SM59.In addition try to insert entry
P * 194.39.131.34 3299
under saprouttab file and restart the router .After that kindly share the dev_rout log file for analysis.
Regards,
Gaurav
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi mate
There is already P * * * , same error (restarted saprouter service)
*** ERROR => NiBufIProcMsg: hdl 22 received rc=-94 (NIEROUT_PERM_DENIED) from peer [nibuf.cpp 2123]
Regards
Hi Kermal,
In SAProuter at custmer site
Maintain Hostname and IP address of your system and check SAPOSS connection.
Regards,
Visu
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Kemal,
check the port 3299 and 3289. It should be opened on the firewall side.
With Regards
Ashutosh Chaturvedi
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Dear Ashutosh,
3299 port is already opened. What is 3289 port for ? by the way there is saprouttab informations. Also there is 3389 for something. Do you mean that 3289 port should be opened in saprouter machine in firewall ?
----------------------------------
# SNC connection to and from SAP
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
# SNC connection to local system for R/3-Support
# R/3 Server: xxxxxxx
# R/3 Instance: 00
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" xxxxxx 3200
# SNC connection to local WINDOWS system for WTS, if applicable
# Windows server:xxxxxx
# Default WTS port: 3389
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" xxxxxxx 3389
# SNC connection to local UNIX system for SAPtelnet, if applicable
# UNIX server: xxxxx
# Default Telnet port: 23
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" xxxxxx 23
----------------------------
Dear Kemal,
Kindly check the sapnote 24177 - OSS1: Message S1452: Connection to Message Server
Can you please paste the screenshot of OSS1->Technical Parameter
With Regaards
Ashutosh Chaturvedi
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
93 | |
10 | |
10 | |
9 | |
9 | |
7 | |
6 | |
5 | |
5 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.