on 06-30-2014 1:06 AM
Message no.BORMMSGDELTACALC164
Please help
Thanks
Dear Anshul,
You need to raise the message with SAP. SAP has locked the ACP for the components.
Once they release the ACP , you will able to get the attributes.
With Regards
Ashutosh Chaturvedi
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
HI All
I am having the same problem with
"Requested Attribute Change package 'SAP_AP====700' Not deliverable.
Can someone help with this?
Best Regards
Fritz Baunsgaard
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Martin,
I am also facing the same issue. please let me know if you get the solution.
will let you know if i have any update.
Regards,
Rajesh
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
The problem is also for m, suddenly Requested Attribute Change Package 'SAP_UI====740' not deliverable, please notify us when problem is solved.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi,
I am also getting error while doing java SP update from sp08 to sp09. Error didn't occur when xml was calculated for dev system but now I get this error for test system:
MESSAGING SYSTEM SERVICE 7.30 SP009 is not available for xxx<SID><host> based on user S000xxxxx.
MESSAGING SYSTEM SERVICE 7.30/# OS Independent : No SP of target range '=SP009' deliverable.
Can this be released if locked?
Thank you for help,
Ankur
Hey,
got the following error message at mopz at step preparing ehp7 stack:
required ACP file K-520COINOTEXVIM.sar ist not visible for your User S000........
When i Pop up the help window it explains "MOPZ Report is for Information for you and you can continue MOPZ with it "
Continue Button to step 2.4 is grey.
Any ideas?
thx
Michael
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Miguel,
While preparing stack.xml for upgrade from ECC 6.0 EHp5 sps12 to EHP7 sps6 , I am getting below error.
"Requested Attribute Change Package 'EA-FINSERV617' not deliverable".
Please suggest.
Regards,
Ashraf
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hello,
I see that the ACP 'EA-FINSERV617' is released for customers.
I cannot find any issue with the settings for this package.
Perhaps there is an issue in the marketplace. The package might have been moved, or the file has been renamed. In this case, the only way would be to create a new Maintenance Optimizer transaction.
Best regards,
Miguel Ariño
Hi,
We have the same error but this time it's for business packages in the portal:
When drilling down to the error, we have this:
BPERPMCM 1.50/# OS independent: No SP of target range '= SP001' deliverable.
We checked the marketplace and all these components are archived already. We are not able to proceed with the stack file calculation. Any help will be much appreciated. Thanks.
Regards
Hi Miguel,
I'm trying to run MOPZ to download Netweaver 7.4 SPS11 package and getting error message:
- Requested Attribute Change Package 'SAP_BASIS=740' not deliverable
- Requested Attribute Change Package 'BI_CONT===757' not deliverable
I chose NW 7.4 stack SPS11 at the beginning but when it passes the "Select OS/DB-Dependent Files" and I look at Systems tab it auto changes to SPS12. I tried several times with new MOPZ but same issue. Can you please assist?
Thanks, Gabrielle
Hello,
I'm going from ERP 6 EHP6 to EHP7 SP9 and getting the following:
Requested Attribute Change Package 'SAP_UI====740' not deliverable.
Requested Attribute Change Package 'SAP_BASIS=740' not deliverable.
I'm going to try to go one SP lower but would appreciate if someone at SAP can see if these packages are locked.
Thank you,
David
Hello,
same problem for me.
The annoying thing about this is that I can't find the ACP in the SAP Marketplace as described in Note 1119856.
So I have to create a new MOPZ transaction to check if the ACP is released.
Or am I doing something wrong? A search for "*ACP*" or 'SAP_BASIS=740' ends up with no result.
Regards,
Michael
Someone from SAP replied in my other thread saying that they are doing some maintenance on these files and will notify us asap once it is released.
This is actually the first time I get this error, I am not sure it has been like this all along, but I am rather surprised that SAP can do this without notifying the customer. now I have to delay my system update schedule.
Thank you.
So we will have to wait...
For others who have the same error:
And the mentioned SAP Note (KBA): http://service.sap.com/sap/support/notes/2210660
Regards, Michael
Hi Miguel,
Can you please unlock 'EA-FINSERV617' component ?
Regards,
Ashraf
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hello guys,
I am trying to generate an XML stack for my SM 7.1 SP 11 and i have this error:
Requested Attribute Change Package 'ST-BCO====710' not deliverable.
Message no.BORMMSGDELTACALC164
Any ideea?
Regards,
Dan
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hello Miguel,
I have the same issue while generating stack XML file in EHP6 for ERP 6.0.
Error says: 'SAP IGS 7.20_EXT': Requested instantiation '20007792' invisible.
Please help what to do exactly to avoid this warning. We are in Solman 7.1 SPS 10.
Best Regards,
Jeevan
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi,
I have the same problem 'SAP KERNEL 7.42 64-BIT': Requested instantiation '20012129' invisible in 7.1 SP06
The solution is "119724 - MOpz: Database Independent kernel file is not offered in
Step "Select OS/DB-Dependent Files...
Best reagards,
Vladimir
Dear Miguel,
I have the same problem.
Now the Attribute Change Package 'SAP_BASIS=702' is not deliverable.
Could you please unlock it.
Thank & kind regards
Stefan Schnabel
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hello,
The status of the ACP says:
Package Status -> Package is released for customers
So far, it appears as unlocked to us.
If anyone else encounters this issue, please notify it ASAP, so that we start investigating.
The package does not appear as locked and I haven't seen any support messages about it yet, it is a bit soon to tell whether there is an issue or not.
Best regards,
Miguel Ariño
Dear Team,
When we trying to generate an stack file we are getting below errors.
Please check and provide the resolution.
Requested Attribute Change Package 'BP-INSTASS600V6' not deliverable.
'SAP IGS 7.20_EXT': Requested instantiation '20007792' invisible.
Please help on this
BR,
Veeru
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi friends. Veeru have the same errors than you after create a new MOPZ.
Requested Attribute Change Package 'BP-INSTASS600V6' not deliverable.
'SAP IGS 7.20_EXT': Requested instantiation '20007792' invisible.
Source SAP ERP EHP3 SAP NW700 Target EHP7 Stack Level 04(042014) SAP NW740
Try resolve this issue selecting the level Stack 03 from a new MOPZ but dont work.
Thanks for your help
Regards,
Edison
Hello,
This error message is different. The issue is not a locked ACP, but rather license for the product version. SAPK-60D04INIRMIPM is not an ACP, it is SP4 for IRMIPM 60D. Check with your account representative at SAP whether you have a license for product version SAP IA AND PB BY VISTEX 6.0 D.
The message about SAP IGS 7.20_EXT is not an error , it is a warning.
Best regards,
Miguel Ariño
Thanks.
It works. Closing the thread
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi,
Today we have the same issue when trying to upgrade our ECC 5.0 up to ECC 6.0 EHP 7.
The error displayed is "Requested Attribute Change Package 'EA-IPPE===400' not deliverable." after confirming the target.
Also the warning "'SAP IGS 720_EXT': requested instantiation '20007792' invisible" is displayed.
Best regards,
Sebastian Mercuri
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Clarke,
Could you help us on the below components, pls
Requested Attribute Change Package 'SRA021====600' not deliverable.
Error Requested Attribute Change Package 'SAP_BASIS=740' not deliverable
We are trying to create MOPZ for FIORI components and we are getting the above error in MOPZ.
Regards,
PSH
Hello,
This error message is caused by some settings in the SAP Service Marketplace, which lock the file even though it should not be locked.
There is nothing you can do from your side to avoid this error.
We are working on it.
Best regards,
Miguel Ariño
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Miguel,
We have the same problem here.
We started this weekend with two errors:
1. Requested Attribute Change Package 'EA-IPPE===400' not deliverable
2. Requested Attribute Change Package 'EA-APPL===606' not deliverable
When trying to calquelate the queue again this morning the error for EA-APPL is gone.
Can you tell us when this is solved for EA-IPPE?
Regards,
Bram Wijman
Hello
I've exactly the same error regarding the EA_IPPE trying to create a maintenance transaction for upgrading to EHP7 stack level 4 released in May.
In addition I also have the following warning:
'SAP IGS 720_EXT': requested instantiation '20007792' invisible
Has this anything to do with Marketplace problems too ?
Thanks a lot
Dino
Hello Miguel,
I'm having an issue with calculating files for Banking services/insurance analyzer. I'm getting:
Requested Attribute Change Package 'BI_CONT===747' not deliverable.
Is there any way we can find the information when some of the files have been locked and for how long will they be locked ?
Thank you.
Hello,
The ACP package was locked today at 9:24 a.m.
I think one should plan with the worst case scenario that it will not be unlocked today. I would have to check with the package owner to know when it will be unlocked.
I will try notifying through this thread if I find out anything.
Best regards,
Miguel Ariño
Hi Anshul,
pls refer below document,
http://help.sap.com/saphelp_sm71_sp10/helpdata/en/46/418970cdb45fabe10000000a1553f7/content.htm
Maintenance Optimizer - SAP Solution Manager - SAP Library
Regards
K.N
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi anshul,
Did you try finding this ACP is SMP in support packages search and loading in spam ?
Regards,
Divyanshu
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
84 | |
10 | |
10 | |
9 | |
7 | |
7 | |
6 | |
5 | |
4 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.