on 06-17-2014 2:32 AM
Hello
We had an issue with one of our controls where we were utilizing an ABAP sub scenario. The job would not finish and remain "in progress" for any scenarios involving a GRC satellite system (e.g. ECC, SRM). SAP advised us to change the source connector in the "Maintain Connectors and Connection Types" in SPRO so that the source system is GRC instead of the satellite system. We tested the updated assignment and noted that the update worked.
Our concern is what, if any, impact these changes will have to our AC side. I have done a bit of research and noticed that the "source connector" field is not needed for AC so there may not be an impact. We are going to test provisioning to confirm but also wanted to query the SCN to see if anyone else had experience with this. I've included a screen shot below that displays the updates we made to the source connector.
Does anyone know if updating the source connector will have an impact on the GRC AC side?
Hi Stacey,
Updating the source connector should not impact any AC functionality, you make a test and in case
it impacts then could be some other reason which we can check.
Regards,
Silky Sharma
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
13 | |
2 | |
2 | |
1 | |
1 | |
1 | |
1 | |
1 | |
1 | |
1 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.