on 06-13-2014 11:22 AM
Dear Friends,
I have started SAP and DB2 but not able to open SAP gui.
Please help me to resolve this issue.
Latest kernel available.
SPDEVDBBL1:devadm 1> startsap all
Checking db6 Database
Database is not available via R3trans
-------------------------------------------
06/13/2014 15:30:28 0 0 SQL1063N DB2START processing was successful.
SQL1063N DB2START processing was successful.
Database activated
Starting Startup Agent sapstartsrv
OK
Instance Service on host SPDEVDBBL1 started
-------------------------------------------
starting SAP Instance DVEBMGS01
Startup-Log is written to /home/devadm/startsap_DVEBMGS01.log
-------------------------------------------
/usr/sap/DEV/DVEBMGS01/exe/sapcontrol -prot NI_HTTP -nr 01 -function Start
Instance on host SPDEVDBBL1 started
SPDEVDBBL1:devadm 5> R3trans -d
This is R3trans version 6.24 (release 720 - 16.05.14 - 20:14:06).
unicode enabled version
R3trans finished (0000).
dev_disp
trc file: "dev_disp.new", trc level: 1, release: "720"
---------------------------------------------------
sysno 01
sid DEV
systemid 324 (IBM RS/6000 with AIX)
relno 7200
patchlevel 0
patchno 615
intno 20020600
make single threaded, Unicode, 64 bit, optimized
profile /usr/sap/DEV/SYS/profile/DEV_DVEBMGS01_SPDEVDBBL1
pid 11534352
kernel runs with dp version 140000(ext=121000) (@(#) DPLIB-INT-VERSION-140000-UC)
length of sys_adm_ext is 592 bytes
*** SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (0111534352) [dpxxdisp.c 1324]
shared lib "dw_xml.so" version 615 successfully loaded
shared lib "dw_xtc.so" version 615 successfully loaded
shared lib "dw_stl.so" version 615 successfully loaded
shared lib "dw_gui.so" version 615 successfully loaded
shared lib "dw_mdm.so" version 615 successfully loaded
shared lib "dw_rndrt.so" version 615 successfully loaded
shared lib "dw_abp.so" version 615 successfully loaded
shared lib "dw_sym.so" version 615 successfully loaded
shared lib "dw_aci.so" version 615 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
rdisp/dynamic_wp_check : 1
rdisp/calculateLoadAverage : 1
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
display_tcp_ip: 0
DpIPCInit2: write dp-profile-values into sys_adm_ext
DpIPCInit2: start server >SPDEVDBBL1_DEV_01 <
DpShMCreate: sizeof(wp_adm) 42560 (2240)
DpShMCreate: sizeof(tm_adm) 5517056 (27448)
DpShMCreate: sizeof(wp_ca_adm) 64000 (64)
DpShMCreate: sizeof(appc_ca_adm) 64000 (64)
"dev_disp" [Read only] 154 lines, 6662 characters
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/1384064/1384080
DpShMCreate: sizeof(comm_adm) 1384080 (2744)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (296)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (80)
DpShMCreate: sizeof(vmc_adm) 0 (2160)
DpShMCreate: sizeof(wall_adm) (41664/42896/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: sizeof(j2ee_adm) 3952
*** WARN: SHM 2 in POOL 10 5706 KB estimated 7006 KB real ( +1299 KB +22 %)
DpShMCreate: SHM_DP_ADM_KEY (addr: 70000000019b000, size: 7174560)
DpShMCreate: allocated sys_adm at 70000000019b010
DpShMCreate: allocated wp_adm_list at 70000000019e080
DpShMCreate: allocated wp_adm at 70000000019e270
DpShMCreate: allocated tm_adm_list at 7000000001a88c0
DpShMCreate: allocated tm_adm at 7000000001a8910
DpShMCreate: allocated wp_ca_adm at 7000000006eb820
DpShMCreate: allocated appc_ca_adm at 7000000006fb230
DpShMCreate: allocated comm_adm at 70000000070ac40
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 70000000085cae0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated gw_adm at 70000000085cb90
DpShMCreate: allocated j2ee_adm at 70000000085cbd0
DpShMCreate: allocated ca_info at 70000000085db50
DpShMCreate: allocated wall_adm at 70000000085dbe0
DpCommAttachTable: attached comm table (header=70000000070ac40/ft=70000000070ac50)
DpSysAdmIntInit: initialize sys_adm
rdisp/test_roll : roll strategy is DP_NORMAL_ROLL
dia token check not active (10 token)
MBUF state OFF
DpCommInitTable: init table for 500 entries
DpRqQInit: keep protect_queue / slots_per_queue 0 / 2001 in sys_adm
*** INFO SHM 31 in POOL 10 9386 KB estimated 6238 KB real ( -3148 KB -34 %)
rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> EsILock: use spinlock for locking
<ES> InitFreeList
ES initialized.
mm.dump: set maximum dump mem to 192 MB
mm.dump: set global maximum dump mem to 192 MB
EsRegisterEmCheck: Register EmGetEsHandles at 1108be800
DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE
MPI: dynamic quotas disabled.
MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
Fri Jun 13 15:30:58 2014
WLM Tag 'DEV/DSP' successfully set for this process
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.4 3.4 4.1) [dpxxdisp.c 1710]
***LOG Q0I=> NiIRead: P=10.30.41.203:3901; L=???: recv (73: Connection reset by peer) [nixxi.cpp 5082]
*** ERROR => NiIRead: SiRecv failed for hdl 17/sock 11
(SI_ECONN_BROKEN/73; I4; ST; P=10.30.41.203:3901; L=???) [nixxi.cpp 5082]
*** ERROR => MsINiRead: NiBufReceive failed (NIECONN_BROKEN) [msxxi.c 2829]
*****************************************************************************
*
* LOCATION SAP-Dispatcher SPDEVDBBL1_DEV_01 on host SPDEVDBBL1
* ERROR The connection to the specified message server
* (SPDEVDBBL1 / 3901) failed. Please check the trace file
* of the message server. If a network filter has
* been activated (see message server parameters
* ms/acl_file_...) please check the configuration
*
* TIME Fri Jun 13 15:30:58 2014
* RELEASE 720
* COMPONENT MS (message handling interface)
* VERSION 4
* RC -35
* MODULE msxxi.c
* LINE 2857
* COUNTER 8
*
*****************************************************************************
*** ERROR => MsIReadFromHdl: NiRead (rc=NIECONN_BROKEN) [msxxi.c 1867]
***LOG Q1K=> MsIAttachEx: StoC check failed, Kernel not compatible with system (rc=-100) [msxxi.c 820]
*** ERROR => Kernel incompatible to already connected instances (see dev_ms for details) [dpxxdisp.c 12748]
DpHalt: shutdown server >SPDEVDBBL1_DEV_01 < (normal)
DpHalt: stop work processes
Fri Jun 13 15:31:15 2014
DpHalt: stop gateway
DpHalt: stop icman
DpHalt: terminate gui connections
DpHalt: wait for end of work processes
DpHalt: waiting for termination of work processes ...
Fri Jun 13 15:31:16 2014
DpHalt: wait for end of gateway
DpHalt: wait for end of icman
DpHalt: waiting for termination of icman ...
Fri Jun 13 15:31:17 2014
DpHalt: not attached to the message server
DpHalt: cleanup EM
DpHalt: cleanup event management
DpHalt: cleanup shared memory/semaphores
DpCleanupSharedResources: removing request queue
*** INFO SHM 31 in POOL 10 9386 KB estimated 6238 KB real ( -3148 KB -34 %)
***LOG Q05=> DpHalt, DpHalt (11534352) [dpxxdisp.c 11740]
DpHalt: *** shutdown completed - server stopped ***
Hi Hari,
From the error message it looks to be kernel problem
Kernel incompatible to already connected instances
Can you follow the steps below to ensure whether db is running fine
1) Stop sap applicaiton using stopsap r3
2) Stop database using db2stop
3) start database using db2start
4) Check connection with database using R3trans -d. If return code is not 0000 then share the trans.log details.
Regards,
Deepak Kori
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Hari,
Your log file shows the below error which means that the system is unable to reach Message Server.
Please share your latest dev_ms file and the instance profile here.
Fri Jun 13 15:30:58 2014
WLM Tag 'DEV/DSP' successfully set for this process
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.4 3.4 4.1) [dpxxdisp.c 1710]
***LOG Q0I=> NiIRead: P=10.30.41.203:3901; L=???: recv (73: Connection reset by peer) [nixxi.cpp 5082]
*** ERROR => NiIRead: SiRecv failed for hdl 17/sock 11
(SI_ECONN_BROKEN/73; I4; ST; P=10.30.41.203:3901; L=???) [nixxi.cpp 5082]
*** ERROR => MsINiRead: NiBufReceive failed (NIECONN_BROKEN) [msxxi.c 2829]
*****************************************************************************
*
* LOCATION SAP-Dispatcher SPDEVDBBL1_DEV_01 on host SPDEVDBBL1
* ERROR The connection to the specified message server
* (SPDEVDBBL1 / 3901) failed. Please check the trace file
* of the message server. If a network filter has
* been activated (see message server parameters
* ms/acl_file_...) please check the configuration
Regards,
Sushil
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Dear Hari Bala,
I would recommend to create an incident under bc-cst-ms or a thread in the message server forum instead.
Regards,
Hugo
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.