why /SAPAPO/TS_REALIGN_COPY job is taking huge time to finish?

[koteswararao_davuluri2]

When user trying to run the job "/SAPAPO/TS_REALIGN_COPY" in quality and production, Quality system performence is quick and Production system batch job taking long time to finish.

any suggessions and OSS notes on it will be highly appreciate.

[Former Member]

Citing just from memory

Deleting source CVC's during realignment can increase speed of this program

Also check if you have time series locks registration on in Prod (TS_LOCKS)

I am no expert. Rest is finding hidden notes on service.sap

[former_member187488]

Hi, Note 1659059 should help here.

[Former Member]

Hi

It might be an obvious question but how many entries are there in the reallignment file and how many CVC's do they relate to?

We had an issue with reallignment taking a long time to complete. A nomal weekly reallignment would be about 100 records but this time I found that the business had mass-changed a lot of materials (without telling us, of course!) and there were about 21000 records, relating to approx 300000 CVC's. It took 10 days to complete!

Chris

[former_member182607]

Hi Chris,

If you read the thread you will see my comment about my experince.

My questions to you:

1. You say you have 300000 CVCs. What is your response time in the planning book when youd 100000 CVCs?

2. Do you ever load all 300000 CVCs at once?
Thanks,

Subash

[Former Member]

Hi Subash

We've actually got over 500,000 in total but we never load them all at once. Big selections do make for pretty sluggish performance in the planning book and we try to discourage users from doing this. Increasingly, we are relying on a system-generated forecast and using BEX to review the results, rather than the planning book.

Chris

[former_member182607]

Hi Chris,

Is there a chance you could load 100000 CVCs and see how much time it takes, if possible? I would very much appreciate that.

Thanks,

Subash

[Former Member]

Hi Subash

A selection with just under 99000 CVC's loaded to the shuffler in around one minute and to the planning book in around four and a half minutes. How does this compare to your experience?

Many thanks

Chris

[former_member182607]

Thanks Chris for your information.

Unfortunately in our business we can not rely on stat forecast alone. We have a lot of District and Territory managers forecastin actively and so they need to log in, drill down and enter the forecast at an appropriate level.

One of our businesses has 186000 CVCs. Our most used selection has 65000 CVCs, which takes about 280 to 320 seconds. Unofrtunately we do a lot of stuff while loading that selection.

We hide some rows, change the UoM, drill down to another level and pivot sort the KFs. We do all this thru the user settings for the selection.
We are wondering whether we can reduce it to something like 150 seconds. Any ideas from you or Ada will be appreciated.

Thanks,

Subash

[kishore_kumar59]

refer note   1823288

what SCM version you are on now, it will help to investigate further.

are there any changes made in production recently, compare the program version with quality.

when was the last time you quality refreshed from production.

since when it is taking long time in production.

[former_member182607]

Hi Koteshwar,
Please refer to the note suggested by Kishore which is for SCM 7.02. Also did the detereoration start recently or has it been slow all the time? We had a massive issue long back with realignment which ultimately was resolved by some settings/parameters at the Oracle database level. I don't even know what was done as the person who did it is not even here anymore. Would be worthwhile to look at that area too.

Sorry I can not be of much assitance.

apologies,

Subash

[koteswararao_davuluri2]

We have SCM 7.02 level 0004(SAPKY70204).

the program /SAPAPO/TS_REALIGN_COPY have following version in all systems.

activ          X  731                             03/25/2008 19:47:50 SAP.

Last refresh completed 2/Mar/2014.

Other information from the chat from functional user:

===============================

  User:

=====

I personally don't think it is an issue with the realignment application. I think the issue is whatever the system is doing when switching to the next partition....PARTITION-NAME 0000000137 ACTION: ADD

User:

====

although it just hit me...the sql statements we see might just be for those instances the realignment program found a hit and neded to delete the original and the time in between is when the application is just doing the searches...so it could be the application

　

but that still doesn't explain why it runs OK in Q and D but not in P

=====================================================

[koteswararao_davuluri2]

We try to install above sap note 1823288 but that note require prerequisite "SAPKY70205" minimum But we have SAPKY70204 as of now. The difficult part is while implementing this note we suppose to create new packages which are not exist with SAPKY70204.  when i try to create one package then its looking for some other package. so Developer feels that better to upgrade the support pack instead of manually creating packages. We send a note to sap and waiting for sap answer.

[Former Member]

Can you check the global work process (SM66 in SCM System, and please check what the job is doing, it must be trying to read some data from a table mostly.

Also, check what is your livecache version , i suppose you recently upgraded to 7.02 along with your ECC Upgrade? this has some thing to do with your livecache.

Regards,

Rorie

[koteswararao_davuluri2]

Hi Rorie,

1)Here is Live cache version details

=========================================================================

Import Date of SP      04/20/2013
Import Time of SP      23:34:31

liveCache Version      RTE       7.9.08   Build 005-123-245-902
liveCache Connection   cdrhsapqlc-QLC

Release          100
Build            9
Patch            3
OpSys            WinX64
Change List      433,676
Last Changed on  Fri Sep 28 15:31:43 2012
Branch           10.0_REL
Debug            0

==========================================================================

2)Also when i check  work process while running batch job I observe workprocess staying idle between below steps..

05/30/2014 09:00:45 SQL-END: 05/30/2014 09:00:45 00:00:00                                                                 DBMAN            099          I

05/30/2014 09:01:42 Loaded data is not yet visible in Reporting (see long text)                                            RSM1            130          S

05/30/2014 09:01:56 SQL: 05/30/2014 09:01:56 F_PROD_SUP7

===========================================================================

3)Work process trace with in that time period between 9:00:45 - 9:01:42-09:01:56

C Fri May 30 08:58:57 2014
C  Warning: Env(MSSQL_SERVER) [CDRHSAPQSCD] <> Prof(dbs/mss/server) [cdrhsapqscd]. Profile value will be used.
C  Thread ID:14612
C  Thank You for using the SLODBC-interface
C  Using dynamic link library 'S:\usr\sap\QSC\D00\exe\dbmssslib.dll'
C  dbmssslib.dll patch info
C    SAP patchlevel  0
C    SAP patchno  401
C    Last MSSQL DBSL patchlevel 0
C    Last MSSQL DBSL patchno         324
C    Last MSSQL DBSL patchcomment Local connection to a named instance does not use LPC (1782171)
C  ODBC Driver chosen: SQL Server Native Client 11.0 native
C  Network connection used from CDRHSAPQSCA to cdrhsapqscd using tcp:cdrhsapqscd
C  Network connection used from CDRHSAPQSCA to cdrhsapqscd using tcp:cdrhsapqscd
C  Driver: sqlncli11.dll Driver release: 11.00.3000
C  GetDbRelease: 11.00.3000.00
C  GetDbRelease: Got DB release numbers (11,0,3000,0)
B  Connection 1 opened (DBSL handle 1)
A 
A Fri May 30 08:59:15 2014
A  WP has reached abap/heaplimit = 40000000 bytes
M 
M Fri May 30 09:04:53 2014
M  ThNeedWpRestart: abap strategy == kill, restart
M  ThWpRestart: restart wp (pid=13472) automatically
B  Disconnecting from ALL connections:
B  Wp  Hdl ConName          ConId     ConState     TX  BC  HC  PRM RCT FRC TIM MAX OPT Date     Time   DBHost           Program                                
B  044 000 R/3              000000000 INACTIVE     NO  NO  NO  YES NO  NO  000 255 255 20140529 150653 cdrhsapqscd                                             
B  044 001 R/3*DTALOC       044000914 DISCONNECTED NO  NO  NO  NO  NO  NO  004 255 255 20140530 090342 cdrhsapqscd      CL_RSD_DTA====================CP       
B  044 002 R/3*SID          044000915 DISCONNECTED NO  NO  NO  NO  NO  NO  004 255 255 20140530 090342 cdrhsapqscd      SAPLRRBA                               
B  044 003 R/3*BWSTATUS     044000916 DISCONNECTED NO  NO  NO  NO  NO  NO  004 255 255 20140530 090345 cdrhsapqscd      SAPLRSSM                               
B  044 004 R/3*BWDIM        044000917 DISCONNECTED NO  NO  NO  NO  NO  NO  004 255 255 20140530 090343 cdrhsapqscd      SAPLRRBA                               
B  044 005 R/3*BWMON        044000918 DISCONNECTED NO  NO  NO  NO  NO  NO  004 255 255 20140530 090415 cdrhsapqscd      SAPLRSSM                               
B  044 006 R/3*TIMESTAMP    044000919 INACTIVE     NO  NO  NO  NO  NO  NO  004 255 255 20140530 090415 cdrhsapqscd      CL_RSD_DTA====================CP       
B  Disconnected from connection 0
B  Disconnected from connection 6
B  statistics db_con_commit (com_total=1168, com_tx=706)
B  statistics db_con_rollback (roll_total=0, roll_tx=0)

---------------------------------------------------
trc file: "dev_w44", trc level: 1, release: "720"
---------------------------------------------------
*
*  ACTIVE TRACE LEVEL           1
*  ACTIVE TRACE COMPONENTS      all, MJ
*
M sysno      00
M sid        QSC
M systemid   562 (PC with Windows NT)
M relno      7200
M patchlevel 0
M patchno    401
M intno      20020600
M make       multithreaded, Unicode, 64 bit, optimized
M profile    \\cdrhsapqscs\sapmnt\QSC\SYS\profile\QSC_D00_CDRHSAPQSCA
M pid        12920
M
M  kernel runs with dp version 138000(ext=119000) (@(#) DPLIB-INT-VERSION-138000-UC)
M  length of sys_adm_ext is 588 bytes
M  ***LOG Q0Q=> tskh_init, WPStart (Workp. 44 12920) [dpxxdisp.c   1382]
I  MtxInit: 30000 0 0
M  DpSysAdmExtCreate: ABAP is active
M  DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M  DpIPCInit2: read dp-profile-values from sys_adm_ext
M  DpShMCreate: sizeof(wp_adm)  117312 (2256)
M  DpShMCreate: sizeof(tm_adm)  54923456 (27448)
M  DpShMCreate: sizeof(wp_ca_adm)  160000 (64)
M  DpShMCreate: sizeof(appc_ca_adm) 160000 (64)
M  DpCommTableSize: max/headSize/ftSize/tableSize=2000/16/5536064/5536080
M  DpShMCreate: sizeof(comm_adm)  5536080 (2744)
M  DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M  DpShMCreate: sizeof(slock_adm)  0 (296)
M  DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M  DpShMCreate: sizeof(file_adm)  0 (80)
M  DpShMCreate: sizeof(vmc_adm)  0 (2160)
M  DpShMCreate: sizeof(wall_adm)  (416064/352496/64/192)
M  DpShMCreate: sizeof(gw_adm) 48
M  DpShMCreate: sizeof(j2ee_adm) 3952
M  DpShMCreate: SHM_DP_ADM_KEY  (addr: 0000000011FE0050, size: 61683680)
M  DpShMCreate: allocated sys_adm at 0000000011FE0060
M  DpShMCreate: allocated wp_adm_list at 0000000011FE30B0
M  DpShMCreate: allocated wp_adm at 0000000011FE32A0
M  DpShMCreate: allocated tm_adm_list at 0000000011FFFCF0
M  DpShMCreate: allocated tm_adm at 0000000011FFFD40
M  DpShMCreate: allocated wp_ca_adm at 0000000015460E10
M  DpShMCreate: allocated appc_ca_adm at 0000000015487F20
M  DpShMCreate: allocated comm_adm at 00000000154AF030
M  DpShMCreate: system runs without slock table
M  DpShMCreate: system runs without file table
M  DpShMCreate: allocated vmc_adm_list at 00000000159F6990
M  DpShMCreate: system runs without vmc_adm
M  DpShMCreate: allocated gw_adm at 00000000159F6A40
M  DpShMCreate: allocated j2ee_adm at 00000000159F6A80
M  DpShMCreate: allocated ca_info at 00000000159F7A00
M  DpShMCreate: allocated wall_adm at 00000000159F7A90
M  DpCommAttachTable: attached comm table (header=00000000154AF030/ft=00000000154AF040)
M  DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 from sys_adm
M  rdisp/queue_size_check_value :  -> on,50,30,40,500,50,500,80
X  EmInit: MmSetImplementation( 2 ).
X  MM global diagnostic options set: 0
X  <ES> client 44 initializing ....
X  <ES> EsILock: use spinlock for locking
X  Using implementation view
X  <EsNT> Using memory model view.
M  <EsNT> Memory Reset disabled as NT default
X  ES initialized.
X  mm.dump: set maximum dump mem to 96 MB
M  DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE
M  ThStart: taskhandler started
M  ThStart: prv_action of W44 = 0x4
M  ThInit: initializing BTC work process W44
M 
M Fri May 30 09:05:05 2014
M  ThInit: running on host CDRHSAPQSCA
M 
M Fri May 30 09:05:06 2014
M  calling db_connect ...
B  Loading DB library 'S:\usr\sap\QSC\D00\exe\dbmssslib.dll' ...
B  Library 'S:\usr\sap\QSC\D00\exe\dbmssslib.dll' loaded
B  Version of 'S:\usr\sap\QSC\D00\exe\dbmssslib.dll' is "720.00", patchlevel (0.324)
C  Callback functions for dynamic profile parameter registered
C  Warning: Env(MSSQL_SERVER) [CDRHSAPQSCD] <> Prof(dbs/mss/server) [cdrhsapqscd]. Profile value will be used.
C  Thread ID:14148
C  Thank You for using the SLODBC-interface
C  Using dynamic link library 'S:\usr\sap\QSC\D00\exe\dbmssslib.dll'
C  dbmssslib.dll patch info
C    SAP patchlevel  0
C    SAP patchno  401
C    Last MSSQL DBSL patchlevel 0
C    Last MSSQL DBSL patchno         324
C    Last MSSQL DBSL patchcomment Local connection to a named instance does not use LPC (1782171)
C  ODBC Driver chosen: SQL Server Native Client 11.0 native
C  Network connection used from CDRHSAPQSCA to cdrhsapqscd using tcp:cdrhsapqscd
C  Network connection used from CDRHSAPQSCA to cdrhsapqscd using tcp:cdrhsapqscd
C  Driver: sqlncli11.dll Driver release: 11.00.3000
C  GetDbRelease: 11.00.3000.00
C  GetDbRelease: Got DB release numbers (11,0,3000,0)
B  Connection 0 opened (DBSL handle 0)
M  ThInit: db_connect o.k.
M  ICT: exclude compression: *.zip,*.rar,*.arj,*.z,*.gz,*.tar,*.lzh,*.cab,*.hqx,*.ace,*.jar,*.ear,*.war,*.css,*.pdf,*.gzip,*.uue,*.bz2,*.iso,*.sda,*.sar,*.gif,*.png,*.swc,*.swf
I  MtxInit: 44 0 0
M  SHM_PRES_BUF   (addr: 0000000025320050, size: 19500000)
M  SHM_ROLL_AREA  (addr: 000007FFD78D0050, size: 268435456)
M  SHM_PAGING_AREA  (addr: 00000000265C0050, size: 268435456)
M  SHM_ROLL_ADM   (addr: 0000000008FC0050, size: 2767448)
M  SHM_PAGING_ADM  (addr: 0000000009270050, size: 5132128)
M  ThCreateNoBuffer  allocated 548152 bytes for 1000 entries at 0000000002DF0050
M  ThCreateNoBuffer  index size: 3000 elems
M  ThCreateVBAdm  allocated 31056 bytes (50 server) at 0000000002830050
X  EmInit: MmSetImplementation( 2 ).
X  MM global diagnostic options set: 0
X  <ES> client 44 initializing ....
X  Using implementation view
X  ES initialized.
X  mm.dump: set maximum dump mem to 96 MB
B  db_con_shm_ini:  WP_ID = 44, WP_CNT = 52, CON_ID = 44000920
B  dbtbxbuf: Buffer TABL  (addr: 000000003CEC0160, size: 130000000, end: 0000000044ABA5E0)
B  dbtbxbuf: Buffer TABLP (addr: 0000000044AC0160, size: 61440000, end: 0000000048558160)
B  dbsync[db_syinit]: successfully attached to shared memory, sync_adm_p = 0000000002D30050
B  dbsync[db_syinit]: Buffer synchronisation started with
B    sync_concept      = SEQ_NR
B    sendon            = 1
B    bufreftime        = 120
B    max_gap_wait_time = 60
B    ddlog_del_time    = 60
B    last_counter      = 6274889
B    oldest_gap        = (2147483647,00000000000000)
B    time_of_last_sync = 20140530090501
B    MySysId           = 'CDRHSAPQSCA         00'
B  dbexpbuf[EXP_SHB]: buffer EIBUF installed with
B    semkey             = 35
B    shmkey             = 54
B    wp_n               = 52
B    sclass             = 0
B    block_length       = 256
B    max_objects        = 20000
B    max_obj_size       = 18598880
B    pref_obj_size      = 0
B    est_large_obj_size = 16384
B    free_vec_lg        = 65
B    hash_vec_size      = 40009
B    buffer_l           = 81920000
B    max_blocks         = 290610
B    free_blocks        = 284277
B    mutex_n            = 40009
B    max_mtx_wait_time  = 17000
B    recovery_delay     = 500000
B    tracing            = 0
B    force_checks       = 0
B    protect_shm        = 0
B  dbexpbuf[EXP_SHM]: buffer ESM   installed with
B    semkey             = 56
B    shmkey             = 65
B    wp_n               = 52
B    sclass             = 0
B    block_length       = 256
B    max_objects        = 10000
B    max_obj_size       = 9298848
B    pref_obj_size      = 0
B    est_large_obj_size = 16384
B    free_vec_lg        = 65
B    hash_vec_size      = 20011
B    buffer_l           = 40960000
B    max_blocks         = 145297
B    free_blocks        = 145294
B    mutex_n            = 20011
B    max_mtx_wait_time  = 17000
B    recovery_delay     = 500000
B    tracing            = 0
B    force_checks       = 0
B    protect_shm        = 0
B  dbexpbuf[EXP_CUA]: buffer CUA   installed with
B    semkey             = 30
B    shmkey             = 47
B    wp_n               = 52
B    sclass             = 10
B    block_length       = 512
B    max_objects        = 5000
B    max_obj_size       = 2088544
B    pref_obj_size      = 0
B    est_large_obj_size = 98304
B    free_vec_lg        = 193
B    hash_vec_size      = 10007
B    buffer_l           = 10240000
B    max_blocks         = 16318
B    free_blocks        = 12366
B    mutex_n            = 10007
B    max_mtx_wait_time  = 17000
B    recovery_delay     = 500000
B    tracing            = 0
B    force_checks       = 0
B    protect_shm        = 0
B  dbexpbuf[EXP_OTR]: buffer OTR   installed with
B    semkey             = 55
B    shmkey             = 64
B    wp_n               = 52
B    sclass             = 13
B    block_length       = 256
B    max_objects        = 2000
B    max_obj_size       = 859552
B    pref_obj_size      = 0
B    est_large_obj_size = 20480
B    free_vec_lg        = 81
B    hash_vec_size      = 4001
B    buffer_l           = 4194304
B    max_blocks         = 13433
B    free_blocks        = 13433
B    mutex_n            = 4001
B    max_mtx_wait_time  = 17000
B    recovery_delay     = 500000
B    tracing            = 0
B    force_checks       = 0
B    protect_shm        = 0
I  MPI: dynamic quotas disabled.
I  MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
M  rdisp/thwpsf_critical_path : -1 -> 0
M  CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.
M  CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.
G  RelWritePermissionForShm( pLocation = 120, pEnforce = 0 )
G  GetWritePermissionForShm( pLocation =  99, pEnforce = 1 )
G  RelWritePermissionForShm( pLocation = 100, pEnforce = 1 )
S  *** init spool environment
S  TSPEVJOB updates outside critical section: event_update_nocsec = 1
S  initialize debug system
T  Stack direction is downwards.
T  debug control: prepare exclude for printer trace
T  new memory block 0000000007AF04C0
S  spool kernel/ddic check: Ok
S  using table TSP02FX for frontend printing
S  2 spool work process(es) found
S  frontend print via spool service enabled
S  printer list size is 150
S  printer type list size is 50
S  queue size (profile)   = 300
S  hostspool list size = 3000
S  option list size is 30
S      found processing queue enabled
S  found spool memory service RSPO-RCLOCKS at 000000000BCC00D0
S  doing lock recovery
S  setting server cache root
S  found spool memory service RSPO-SERVERCACHE at 000000000BCC0FE0
S    using messages for server info
S  size of spec char cache entry: 297032 bytes (timeout 100 sec)
S  size of open spool request entry: 2512 bytes
S  immediate print option for implicitely closed spool requests is disabled
N  SncInit(): Initializing Secure Network Communication (SNC)
N        PC with Windows NT (mt,ascii,SAP_UC/size_t/void* = 16/64/64)
N        GetUserName()="SAPServiceQSC"  NetWkstaUser="SAPServiceQSC"
N  SncInit():   found snc/data_protection/max=3, using 3 (Privacy Level)
N  SncInit():   found snc/data_protection/min=2, using 2 (Integrity Level)
N  SncInit():   found snc/data_protection/use=9, using 3 (Privacy Level)
N  SncInit(): found  snc/gssapi_lib=c:\windows\system32\gx64krb5.dll
N    File "c:\windows\system32\gx64krb5.dll" dynamically loaded as GSS-API v2 library.
N    The internal Adapter for the loaded GSS-API mechanism identifies as:
N    Internal SNC-Adapter (Rev 1.0) to Kerberos 5/GSS-API v2
N    FileVersionInfo: InternalName= GX64KRB5, FileVersion= 1.0.8.0
N  SncInit():   found snc/identity/as=p:SAPServiceQSC@corp.timken.com
N  SncInit(): Accepting  Credentials available, lifetime=Indefinite
N  SncInit(): Initiating Credentials available, lifetime=Indefinite
M  SNC (Secure Network Communication) enabled
A  ***GENER* Trace switched on ***
A 
A  ---PXA-------------------------------------------
A  PXA INITIALIZATION
A  PXA: Locked PXA-Semaphore.
A  System page size: 4kb, total admin_size: 33656kb, dir_size: 32640kb.
A  Attached to PXA (address 000007FFE7900050, size 400000K, 1 fragments of 366344K )
A  PXA allocated (address 000007FFE7900050, size 400000K)
A  abap/pxa = shared protect gen_remote
A  PXA: checking structure sizes: 752|272|16
A  PXA INITIALIZATION FINISHED
A  ---PXA-------------------------------------------
A 
A  ATRA: pfclock execution time = 0
A  ABAP ShmAdm attached (addr=000007DFDF188000 leng=20955136 end=000007DFE0584000)
A  >> Shm MMADM area (addr=000007DFDF67FAA0 leng=242176 end=000007DFDF6BACA0)
A  >> Shm MMDAT area (addr=000007DFDF6BB000 leng=15499264 end=000007DFE0583000)
A  RFC rfc/signon_error_log = -1
A  RFC rfc/dump_connection_info = 0
A  RFC rfc/dump_client_info = 0
A  RFC rfc/cp_convert/ignore_error = 1
A  RFC rfc/cp_convert/conversion_char = 23
A  RFC rfc/wan_compress/threshold = 251
A  RFC rfc/recorder_pcs not set, use defaule value: 2
A  RFC rfc/delta_trc_level not set, use default value: 0
A  RFC rfc/no_uuid_check not set, use default value: 0
H  HTTP> Parameter icf/ssocookie_mandatory set to 0
B  dbtran INFO (init_connection '<DEFAULT>' [MSSQL:720.00]):
B   max_blocking_factor       =  50,  min_blocking_factor         =   5,
B   max_in_blocking_factor    = 255,  min_in_blocking_factor      =  10,
B   max_union_blocking_factor =  50,  min_union_blocking_factor   =   5,
B   prefer_union_all          =   1,  prefer_join                 =   1,
B   prefer_fix_blocking       =   0,  prefer_in_itab_opt          =   0,
B   convert AVG               =   1,  alias table FUPD            =   0,
B   escape_as_literal         =   0,                                  
B   select *                  =0x00,  character encoding          = STD / []:X,
B   use_hints                 = abap->1, dbif->0x1, upto->0
M  ThrCreateShObjects  allocated 108088 bytes at 0000000002D90050
Y  dyWpInit
Y    ztta/dynpro_ara 800000
Y    ztta/cua_ara    500000
Y    ztta/diag_ara   250000
N  SsfSapSecin: getenv(SECUDIR)=="S:\usr\sap\QSC\D00/sec"
N 
N  =================================================
N  === SSF INITIALIZATION:
N  ===...SSF Security Toolkit name SAPSECULIB .
N  ===...SSF library is S:\usr\sap\QSC\D00\exe\sapcrypto.dll .
N  ===...SSF default hash algorithm is SHA1 .
N  ===...SSF default symmetric encryption algorithm is DES-CBC .
N  ===...SECUDIR="S:\usr\sap\QSC\D00/sec"
N  ===...loading of Security Toolkit successfully completed.
N  ===   SAPCRYPTOLIB  5.5.5C pl32  (Apr  2 2011) MT-safe
N  =================================================
N 
N Fri May 30 09:05:08 2014
N  MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N  MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M  JrfcVmcRegisterNativesDriver o.k.
W  =================================================
W  === ipl_Init() called
W    ipl_Init(): wp task type is 4:BTC, skip initialization
W  === ipl_Init() returns 0, ITSPE_OK: OK
W  =================================================
N  SignInit: successfully obtained handle for Security Context cache
N  VSI: WP init in ABAP VM completed with rc=0
E  Enqueue Info: enque/use_pfclock2 = FALSE
E  Enqueue Info: row condense enabled
E  EnqId_Initialize: local EnqId initialization o.k.
M  rdisp/thsend_order : -1 -> 0
M  ThISend: set thsend_order to 0