JCO_ERROR_SERVER_STARTUP. Please help on this issue...

[former_member190681]

Hi Experts,

I am having an error with JCO_ERROR_SERVER_STARTUP in communication channel. This is RFC to Soap scenario, from they are sending messages from Sap R/3 system but it is stuked in sap sm58, error RFC communication failure, when i reprocess with F6 it is not executed. i stopped the RFC communication channel as well as updated rfc parameters and activated but still problem persist.

Please help me how to resolve this issue.

Erro Log:

Error in processing caused by: com.sap.mw.jco.JCO$Exception: (129) JCO_ERROR_SERVER_STARTUP: Server startup failed at Sat May 17 19:01:42 GMT+05:30 2014. This is caused by either a) erroneous server settings, b) the backend system has been shutdown, c) network problems. Will try next startup in 1 seconds. Could not start server: Connect to SAP gateway failed Connect parameters: TPNAME=RFC_GRD_XIS_RM GWHOST=10.1.66.111 GWSERV=sapgw00 ERROR       service '0' in use TIME        Sat May 17 19:01:42 201 RELEASE     700 COMPONENT   NI (network interface) VERSION     38 RC          -4 MODULE      nixxi.cpp LINE        2823 DETAIL      NiICheckPendConnection SYSTEM CALL select, getsockopt ERRNO       10048 ERRNO TEXT  WSAEADDRINUSE: Address already in use COUNTER     1

Regards,

Kiran Polani

[santosh_k3 · Accepted solution]

Hi Sri,

Check whether you have mentioned all the necessary parmeters in RFC communication channel and in RFC Destination.

Both should have the same program id : RFC_GRD_XIS_RM

1) Do the connection test of RFC Destination.

2) Also check whether the program id is registered in the Gateway.

     to check goto SMGW-->Goto-->Logged on clients.

let me know what you see from the above.

Regards

Sai

[former_member190681 · Accepted solution]

Dear Sri,

i checked in sm59 of r/3 system, the program ID: RFC_GRD_XIS_RM is present, but the problem is while connection test it is failed with destination host failed.

it is the sceanrio RFC to JDBC.

Please help me on this.

Regards,

Kiran Polani

[Former Member · Accepted solution]

Hi Sri,

I have faced a similar issue sometime back.

I suggest you restart the RFC adapter serviced in NWA channel.

Regards,

Amarnath

[former_member190681 · Accepted solution]

Dear Amar,

This is the production issue, we are not ready to restart the service.

Please suggest for other solution.

if we restart are u assure to resolve this issue.

Regards,

Kiran Polani.

[santosh_k3 · Accepted solution]

Hi Sri,

Cross check the parameters that is mentioned in the RFC Communiaction channel.

Follow below procedure:

1) Create the RFC Destination , Give the Program ID in it.

     Don test RFC Connection after creating it.

2) Create the Sender RFC Communication channel, mention the same Program ID along the ECC 

   Server details.

3) Ping the channel , Do the RFC Connection test now.

4) If still there is a connection failure , stop and start the RFC Communaication channel several times

    and then do the RFC Connection test.

It should work in this way.

Let me know , if you are facing any issues.

Provide the screen shots for failures if any.

Regards,

Sai

[former_member190681 · Accepted solution]

Dear sai,

All the parameter all correct only in RFC Communication Channel.

1) I tested in SAP R/3 sm59 ( RFC destination) Connection Test, but it is failed to connect of Program ID's.

2) Second Observation is few queues are stuked in sm58 with the error " Error Communication Failure".

Error is target host not found error is coming.

Regards,

Kiran polani

[santosh_k3 · Accepted solution]

Hi Sri,

Send the screen shot fo RFC Destination connection test error.

If you are getting RFC connection test error then these are the possibilities of error.

1) Host name , user name , pwd , etc ,, in Sender RFC Communication channel might have

     mentioned wrongly.  cross verify.

If not , delete the channel and recreate it.

2) Program ID is not registered in the Gateway.

Regards

Sai

[former_member190681 · Accepted solution]

Dear Sai,

All details in communication channels are correct only, and already existing cc deleted and created new but not we got same error.

in sap r/3 sm59 we got the below connection test error.

Regards,

Kiran Polani

[santosh_k3 · Accepted solution]

Hi Sri,

Check this note 353597 - Registering RFC server programs , this should solve you issue

Regards

Sai

[former_member190681 · Accepted solution]

Dear Sai,

How to check Program ID in function module

i am not found the program id in function module(se38,se37).  Where i have to check for program ID.

Is it related to XI issue or SAP R/3 side Issue?

is it maintained in XI or R/3 system.

Regards,

Kiran Polani

[santosh_k3 · Accepted solution]

Hi Sri,

program id is registered in the Gateway.

to check goto ECC SMGW-->Goto-->Logged on clients.

there you find the pgm id which you have given in RFC Destination(ECC) and Communication channel(XI) (both should be same).

Regards

Sai

[former_member190681 · Accepted solution]

Dear Sai,

i have a doubt, can we do manually in R/3 server for registering Program ID.

how can i add in r/3.

Please guide me and do u have any documents.

Regards,

Kiran Polani

[Former Member · Accepted solution]

Sri...

Please check the below link:

https://help.sap.com/saphelp_nw04/helpdata/en/f6/daea401675752ae10000000a155106/content.htm

http://scn.sap.com/thread/1083373

----

Mutti.

[former_member190681]

Dear,

Maintained the Host Name in sap r/3 system like "sapg00" in log file and checked in smgw transaction code within that selected logon clients after restarting the sap server and OS. then signals are coming Propely. Seen RFC also after done those things.

Regards,

Kiran Polani

[former_member303666]

Hi Sri,

check the below answered thread. i hope it will help.

Regards,

Kesava