Restore Default Stages related to Default Paths in MSMP for BRM

[Former Member]

Hi,

By mistake while configuring MSMP for BRM, I have deleted the default  setting ( IN step # 5 )related to path GRAC_DEFAULT_PATH. How to restore default stage associated with the default path in sap grc 10 msmp (Attached the screen shot for reference)

My Analysis: Since these default paths are coming from BC sets. If I reactivate the BC sets related to MSMP, I may get back the associated default stage settings.

My Concern: It will restore the MSMP setting to default, hence I will loose all my customization.

[former_member184114 · Accepted solution]

Rvi,

Please manually all default stages it should work fine.

From the below screen (maintain stages) do below

1. click on add button

2. Enter stage no. 1, 2 and 3 for each stage (if you are following 3 stages)

3. Select GRAC_MANAGER, GRAC_ROLEOWNER and  GRAC_SECURITY stages (for each stage)

4. Save and activate the MSMP settings.

Also, see the attachment.

It should work fine.

Regards,

Faisal

[Former Member · Accepted solution]

Hi Faisal,

Thanks a lot . It works absolutely fine.

Note: Make sure to change the stage sequence No to any no from 001. Since by default the stage sequence no is 000, and if you use that number then, it will not allow you to save. You will get an error" Please fill all the required field" Very tough to decipher