on 01-15-2014 6:15 PM
Hi,
You need to create projected stock profile.
Path:
SPRO >> Supply Network Collaboration >> Replenishment >> Replenishment Planning >> Projected Stock >> Define Profiles for the Projected Stock and the SNI Demand
Example:
1)
Profile name= XXXXX
Term=Unrestriected Stock
Term type=Stock Type
Sign=plus (if you want to add else Minus)
Use Past data=Use Past data
2)
Profile name= XXXXX
Term=Demand
Term type=Stock Type
Sign=plus (if you want to add else Minus)
Use Past data=Use Past data
and so on...as per your need you can add.(Intransit,planned receipts etc....)
Once profile is created you need to assigned to location
Path:
SPRO >> Supply Network Collaboration >> Replenishment >> Replenishment Planning >> Define Profiles for the Assign Settings >> Assign Settings for Replenishment Planning and SNI
Regards,
Nikhil
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi,
The problem was solved by the following steps below:
1. In class /SCF/CL_ICHDM_REPL_SERV(SE24 tcode) was enhanced a method called ZCOMPUTE_PRJSTK, that is a copy from standard method COMPUTE_PRJSTK. You're able to adjust the projected stock in this method.
2.
SM30: /SCF/CBSERVICES - You need to find the projected stock key figure, in my case it is REPLPROJSTOCK. In column "Interface Component" you'll need set the custom method from standard class, just like below:
3. The result is:
regards
User | Count |
---|---|
7 | |
4 | |
3 | |
2 | |
2 | |
1 | |
1 | |
1 | |
1 | |
1 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.