Skip to Content

Archived discussions are read-only. Learn more about SAP Q&A

Upgrade Solution Manager 7.0 to 7.1

Hello, TechSupport!

I am upgrading SAP Solution Manager from 7.0 up to 7.1. Phase MAIN_SHDRUN/ACT_UPG is running for 7 days.

It is ok ? How can I find that SUM is hungs up or upgrade is running good ?

TP is running:

There is no running jobs in SM37

Phasexe.trc:

20131231104800:PHASEXE:0:WARNING: Unused exec status 4 for phase 'MAIN_SHDRUN/JOB_RBCA_FSP_UPG_WRITE' - ignored!

20131231104800:PHASEXE:0:WARNING: Unused exec status 2 for phase 'MAIN_SHDRUN/RUN_RSINCGEN_SHD1' - ignored!

20131231104800:PHASEXE:0:WARNING: Unused exec status 2 for phase 'MAIN_SHDRUN/SETSYNC_SHD_STARTED' - ignored!

20131231104800:PHASEXE:0:WARNING: Unused exec status 2 for phase 'MAIN_SHDRUN/RFCDEST_CREATE_S2O' - ignored!

20131231104800:PHASEXE:0:WARNING: Unused exec status 2 for phase 'MAIN_SHDRUN/SUBMOD_DIFFEXP/DIFFEXPDDIC_IP' - ignored!

20131231104800:PHASEXE:0:WARNING: Unused exec status 2 for phase 'MAIN_SHDRUN/SUBMOD_SHDPREPEXP/ADDTOHEAP_SFW' - ignored!

20131231104800:PHASEXE:0:WARNING: Unused exec status 2 for phase 'MAIN_SHDRUN/SUBMOD_DIFFEXP/RUN_RDDIT006' - ignored!

20131231104800:PHASEXE:0:WARNING: Unused exec status 2 for phase 'MAIN_SHDRUN/SUBMOD_DIFFEXP/DIFFEXP_TMPSAP' - ignored!

20131231104800:PHASEXE:0:WARNING: Unused exec status 2 for phase 'MAIN_SHDRUN/RUNASYN_RSGENLOAD' - ignored!

20131231104800:PHASEXE:0:WARNING: Unused exec status 4 for phase 'MAIN_SHDRUN/SUBMOD_DIFFEXP/JOB_SRM_PRE_CHECKS_2' - ignored!

20131231104800:PHASEXE:0:WARNING: Unused exec status 4 for phase 'MAIN_SHDRUN/RUN_RUTPREDEPVIEWS4DEL' - ignored!

20131231104800:PHASEXE:0:WARNING: Unused exec status 2 for phase 'MAIN_SHDRUN/BUFFEROP_ACTUPG' - ignored!

20131231104800:PHASEXE:0:WARNING: Unused exec status 2 for phase 'MAIN_SHDRUN/SUBMOD_SHDPREPEXP/JOB_DL4TA_UPG' - ignored!

20131231104800:PHASEXE:0:WARNING: Unused exec status 2 for phase 'MAIN_SHDRUN/SUBMOD_DIFFEXP/JOB_RDDSAVTE' - ignored!

20131231104800:PHASEXE:0:WARNING: Unused exec status 2 for phase 'MAIN_SHDRUN/DDIC_UPG' - ignored!

20131231104800:PHASEXE:0:WARNING: Unused exec status 2 for phase 'MAIN_SHDRUN/SUBMOD_DIFFEXP/SQLDB_WCONT2UPP1' - ignored!

20131231104800:PHASEXE:0:WARNING: Unused exec status 2 for phase 'MAIN_SHDRUN/START_SHDI_FIRST' - ignored!

ALOG702:

### Phase MAIN_SHDRUN/SUBMOD_SHDPREPEXP/NTACT_DELPRE:

ALL                  SM1.ALL \ 0000 20131226201131              sm1adm       sap_server 20131226201112004e38

ALL                  SM1.ALL \ 0000 20131226201140              sm1adm       sap_server 20131226201112005d18

ALL                  SM1.ALL \ 0000 20131226201146              sm1adm       sap_server 201312262011120058fc

ALL                  SM1.ALL \ 0000 20131226201147              sm1adm       sap_server 201312262011120059d0

ALL                  SM1.ALL \ 0000 20131226201148              sm1adm       sap_server 20131226201112005b60

ALL                  SM1.ALL \ 0000 20131226201211              sm1adm       sap_server 20131226201112005cb0

ALL                  SM1.ALL \ 0000 20131226201234              sm1adm       sap_server 20131226201112005a44

ALL                  SM1.ALL \ 0000 20131226201255              sm1adm       sap_server 2013122620111200588c

### Phase MAIN_SHDRUN/SUBMOD_SHDPREPEXP/JOB_SFW_UPG:

### Phase MAIN_SHDRUN/SUBMOD_SHDPREPEXP/ADDTOHEAP_SFW:

### Phase MAIN_SHDRUN/JOB_UMOD20_UPG:

### Phase MAIN_SHDRUN/RUN_RADTBUCACT:

### Phase MAIN_SHDRUN/RUN_RUTPREDEPVIEWS4DEL:

### Phase MAIN_SHDRUN/DB6_ACTIONS:

### Phase MAIN_SHDRUN/BUFFEROP_ACTUPG:

### Phase MAIN_SHDRUN/SQLDB_SET_TIMESTAMP_E070SHD:

### Phase MAIN_SHDRUN/ACT_UPG:

ALL                  SM1.ALL a 0000 20131226201441              sm1adm       sap_server 20131226201441005cc8

ALL                  SM1.ALL ( 0000 20131226201441              sm1adm       sap_server 20131226201441005cc8

ALL                  SM1.ALL ) 0000 20131231104735              sm1adm       sap_server 201312311047340044e4

ALL                  SM1.ALL ( 0000 20131231104759              sm1adm       sap_server 20131231104758005dd0

### Phase MAIN_SHDRUN/ACT_UPG:

ALL                  SM1.ALL d 0000 20131231104803              sm1adm       sap_server 20131231104803005b40

ALL                  SM1.ALL a 0000 20131231104804              sm1adm       sap_server 201312311048030058b8

ALL                  SM1.ALL ( 0000 20131231104804              sm1adm       sap_server 201312311048030058b8



SAPup.ECO:

### Phase MAIN_SHDRUN/ACT_UPG:

SAPup> Starting subprocess in phase 'ACT_UPG' at 20131231104803

    ENV: DBMS_TYPE=ora

    ENV: JAVA_HOME=c:\j2sdk1.4.2_22-x64

    ENV: NLS_LANG=AMERICAN_AMERICA.UTF8

    ENV: ORACLE_HOME=D:\oracle\SM1\11203

    ENV: ORACLE_SID=SM1

    ENV: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC

    ENV: PATH=D:\sum\SUM\abap\exe;D:\oracle\SM1\11203\bin;D:\oracle\SM1\102\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;D:\usr\sap\SM1\SYS\exe\uc\NTAMD64

    ENV: SAPDATA_HOME=D:\oracle\SM1

    ENV: SAPSYSTEMNAME=SM1

    ENV: auth_shadow_upgrade=1

    ENV: dbs_ora_schema=SAPSR3

    ENV: dbs_ora_tnsname=SM1

EXECUTING D:\sum\SUM\abap\exe\tp.EXE  "pf=D:\sum\SUM\abap\var\ACTUPG.TPP" put SM1

This is D:\sum\SUM\abap\exe\tp.EXE version 380.08.41 (release 720, unicode enabled)

Looking for effective putsteps ... ... ready (looking for putsteps)

SLOG702:

### Phase MAIN_SHDRUN/ACT_UPG:

START REMOVE STOPMARK      ALL        20131226201436              sm1adm       sap_server 20131226201436005cdc

STOP  REMOVE STOPMARK      ALL        20131226201436              sm1adm       sap_server 20131226201436005cdc

START REMOVE STOPMARK      SM1        20131226201441              sm1adm       sap_server 20131226201441005c70

STOP  REMOVE STOPMARK      SM1        20131226201441              sm1adm       sap_server 20131226201441005c70

START put                  SM1        20131226201441              sm1adm       sap_server 20131226201441005cc8

START SET STOPMARK         SM1        20131226201441              sm1adm       sap_server 20131226201441005cc8

INFO: Buffer saved as D:\sum\SUM\abap\buffer\SM1SAV.

STOP  SET STOPMARK         SM1        20131226201441              sm1adm       sap_server 20131226201441005cc8

LIST  put                  SM1 (A{|

START tplock_eu            SM1 (      20131226201441              sm1adm       sap_server 20131226201441005cc8

STOP  tplock_eu            SM1 (      20131226201441              sm1adm       sap_server 20131226201441005cc8

START DD ACTIVATION        SM1 A      20131226201442              sm1adm       sap_server 20131226201441005cc8

START tp_getprots          SM1 J      20131226201442              sm1adm       sap_server 20131226201441005cc8

START tpunlock_eu          SM1        20131231104734              sm1adm       sap_server 201312311047340044e4

STOP  tpunlock_eu          SM1        20131231104735              sm1adm       sap_server 201312311047340044e4

START tplock_eu            SM1        20131231104758              sm1adm       sap_server 20131231104758005dd0

STOP  tplock_eu            SM1        20131231104759              sm1adm       sap_server 20131231104758005dd0

### Phase MAIN_SHDRUN/ACT_UPG:

START REMOVE STOPMARK      SM1        20131231104803              sm1adm       sap_server 20131231104803005b40

STOP  REMOVE STOPMARK      SM1        20131231104803              sm1adm       sap_server 20131231104803005b40

START put                  SM1        20131231104803              sm1adm       sap_server 201312311048030058b8

START SET STOPMARK         SM1        20131231104804              sm1adm       sap_server 201312311048030058b8

INFO: Buffer saved as D:\sum\SUM\abap\buffer\SM1SAV.

STOP  SET STOPMARK         SM1        20131231104804              sm1adm       sap_server 201312311048030058b8

LIST  put                  SM1 (A{|

START tplock_eu            SM1 (      20131231104804              sm1adm       sap_server 201312311048030058b8

STOP  tplock_eu            SM1 (      20131231104804              sm1adm       sap_server 201312311048030058b8

START tp_getprots          SM1 J      20131231104804              sm1adm       sap_server 201312311048030058b8

sap_server

PHASES.LOG:

1 ETQ201 Entering upgrade-phase "MAIN_SHDRUN/ACT_UPG" ("20131231104800")

4 ETQ399 Set database connect to shadow.

4 ETQ399 Set environment for shadow connect:

4 ETQ399 Set RFC variables for shadow connect:

4 ETQ399 System-nr = '12', GwService = 'sapgw12' Client = '000'

4 ETQ380 computing toolpath for request "TP_SHADOW_CONNECT"

4 ETQ381 request "TP_SHADOW_CONNECT" means "tp needs to connect to shadow system"

4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"

4 ETQ399 Requirement for tp maps to 'exe'

4 ETQ383 translates to path "D:\sum\SUM\abap\exe"

4 ETQ399 Set tool parameters for shadow connect:

4 ETQ399   default TPPARAM: SHADOW.TPP

2 ETQ366 Connect variables are set for shadow instance access

4 ETQ399 System-nr = '12', GwService = 'sapgw12' Client = '000'

4 ETQ399 Environment variables:

4 ETQ399   dbs_ora_schema=SAPSR3

4 ETQ399   auth_shadow_upgrade=<null>

1 ETQ200 Executing actual phase 'MAIN_SHDRUN/ACT_UPG'.

1 ETQ399 Phase arguments:

2 ETQ399 Arg[0] = 'ACTUPG.BUF'

2 ETQ399 Arg[1] = 'ACTUPG.TP0'

2 ETQ399 Arg[2] = 'SHDINCIMP.BUF'

2 ETQ399 Arg[3] = ''

1 ETQ399 Using error summary log 'ACTUPG.ELG'.

1 ETQ399 Executing putsteps '{|(A'.

3 ETQ399 20131231104803: PID 23360 execute 'D:\sum\SUM\abap\exe\tp "pf=D:\sum\SUM\abap\var\SHADOW.TPP" delstopmark "buffer=SM1"' , output written to 'D:\sum\SUM\abap\log\TP.ECO'.

3 ETQ399 20131231104803: PID 23360 exited with status 0 (time 0.000 real)

3 ETQ399 20131231104803: PID 22712 execute 'D:\sum\SUM\abap\exe\tp "pf=D:\sum\SUM\abap\var\ACTUPG.TPP" put SM1' in background, output written to 'D:\sum\SUM\abap\log\SAPup.ECO'.

TP.ECO:

SAPup> Starting subprocess in phase 'ACT_UPG' at 20131231104803

    ENV: DBMS_TYPE=ora

    ENV: JAVA_HOME=c:\j2sdk1.4.2_22-x64

    ENV: NLS_LANG=AMERICAN_AMERICA.UTF8

    ENV: ORACLE_HOME=D:\oracle\SM1\11203

    ENV: ORACLE_SID=SM1

    ENV: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC

    ENV: PATH=D:\sum\SUM\abap\exe;D:\oracle\SM1\11203\bin;D:\oracle\SM1\102\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;D:\usr\sap\SM1\SYS\exe\uc\NTAMD64

    ENV: SAPDATA_HOME=D:\oracle\SM1

    ENV: SAPSYSTEMNAME=SM1

    ENV: auth_shadow_upgrade=1

    ENV: dbs_ora_schema=SAPSR3

    ENV: dbs_ora_tnsname=SM1

EXECUTING D:\sum\SUM\abap\exe\tp.EXE  "pf=D:\sum\SUM\abap\var\SHADOW.TPP" delstopmark "buffer=SM1"

This is D:\sum\SUM\abap\exe\tp.EXE version 380.08.41 (release 720, unicode enabled)

tp finished with return code: 0

meaning:

  Everything OK

tp=>sapparam(1c): No Profile used.

tp=>sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline


TP.SAV:

#--------------------------------------------------------------

#---- MASKING file TP.ECO from D:\sum\SUM\abap\log

#---- TIME: 20131231104803  PHASE: MAIN_SHDRUN/ACT_UPG

#--------------------------------------------------------------

SAPup> Starting subprocess at 20131231104759

    ENV: DBMS_TYPE=ora

    ENV: JAVA_HOME=c:\j2sdk1.4.2_22-x64

    ENV: NLS_LANG=AMERICAN_AMERICA.UTF8

    ENV: ORACLE_HOME=D:\oracle\SM1\11203

    ENV: ORACLE_SID=SM1

    ENV: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC

    ENV: PATH=D:\sum\SUM\abap\exe;D:\oracle\SM1\11203\bin;D:\oracle\SM1\102\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;D:\usr\sap\SM1\SYS\exe\uc\NTAMD64

    ENV: SAPDATA_HOME=D:\oracle\SM1

    ENV: SAPSYSTEMNAME=SM1

    ENV: auth_shadow_upgrade=1

    ENV: dbs_ora_schema=SAPSR3

    ENV: dbs_ora_tnsname=SM1

EXECUTING D:\sum\SUM\abap\exe\tp.EXE  "pf=D:\sum\SUM\abap\var\SHADOW.TPP" locksys SM1

This is D:\sum\SUM\abap\exe\tp.EXE version 380.08.41 (release 720, unicode enabled)

tp finished with return code: 0

meaning:

  Everything OK

tp=>sapparam(1c): No Profile used.

tp=>sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline

Former Member
replied

Hello Igor

Are the logs getting updated ?

As you are on Oracle you must be hitting the issue mentioned in this note.

1635605 - CLIENT HANGS ON INSERT INTO TABLE WITH SECUREFILE LOB

Set the parameter "_use_zero_copy_io=false" and restart the database.

Regards

RB

0 View this answer in context

Helpful Answer

by
Not what you were looking for? View more on this topic or Ask a question