Error:MP: exception caught with cause com.sap.aii.adapter.xi.routing.RoutingException: InterfaceDetermination did not yield any actual interface

[Former Member]

Hi ,

I am Implementing Async/Sync bridge, where I have File(A.Source(Req))-->Soap(WebService(Req/Res))-->File(C.Target(Res)).

I reffered document through the below link to do this scenario.

http://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&ved=0CCoQFjAA&url=http%3A%2F%2Fwww....

Below are the developed ESR,ID ,Receiver channel modules and Configuration Overview images.

Thanks in Advance

Mohammed Gouse

[rhviana]

Hi Mohrammed,

Do you check this blog ?

http://wiki.scn.sap.com/wiki/display/XI/Sync-Async+without+ccBPM

Regards,

BR.

Viana

[Former Member]

Hi Ricardo,

I checked the block and tried implimenting the module at sender channel .

Got this error.

1/2/2014 3:32:08 PM	Information	MP: processing local module localejbs/AF_Modules/RequestResponseBean
1/2/2014 3:32:08 PM	Information	RRB: entering RequestResponseBean
1/2/2014 3:32:08 PM	Information	RRB: passing through ...
1/2/2014 3:32:08 PM	Information	RRB: leaving RequestResponseBean
1/2/2014 3:32:08 PM	Information	MP: processing local module localejbs/CallSapAdapter
1/2/2014 3:32:08 PM	Information	Application attempting to send an XI message synchronously using connection File_http://sap.com/xi/XI/System
1/2/2014 3:32:08 PM	Information	Trying to put the message into call queue
1/2/2014 3:32:08 PM	Information	Message successfully put into the queue
1/2/2014 3:32:08 PM	Information	Message retrieved from call queue
1/2/2014 3:32:08 PM	Information	Message status set to DLNG
1/2/2014 3:32:08 PM	Information	Executing Request Mapping "http://infosys.com/sap/pi/poc/186408/OM_ReqSoapIn_AsynSync" (SWCV 222f40e087c711e28259d52dc0a88d3a)
1/2/2014 3:32:08 PM	Information	Delivering to channel: CC_AsyncSync_Soap_Call
1/2/2014 3:32:08 PM	Information	MP: processing local module localejbs/sap.com/com.sap.aii.af.soapadapter/XISOAPAdapterBean
1/2/2014 3:32:08 PM	Information	XISOAP: Received an XI message for processing
1/2/2014 3:32:08 PM	Information	XI Packaging (Bulk Mode) is not Enabled, Proceeding to the Normal Processing.
1/2/2014 3:32:08 PM	Information	SOAP: request message entering the adapter with user Guest
1/2/2014 3:32:08 PM	Information	SOAP: completed the processing
1/2/2014 3:32:08 PM	Information	SOAP: continuing to response message f103b5a7-7394-11e3-8344-0000001e8e12
1/2/2014 3:32:08 PM	Error	Transmitting the message using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error encountered while executing mapping: com.sap.aii.af.service.mapping.MappingException: com.sap.aii.utilxi.misc.api.ResourceException: Could not determine mapping steps for message f103b5a7-7394-11e3-8344-0000001e8e12

[Former Member]

Hi All,

I kept virtual receiver still the error persist.

Am using the Modules in the receiver channel as it is my Bussiness requirement.

Thanks,

Mohammed Gosue

[Former Member]

Hi Mohammed,

Were u successful in this? I am getting the same error when configured in PI 7.31 single stack. I was able to configure the scenario in PI 7.11 but now shifted to new stack PI 7.31 single stack.

Regarding the screen shots that you shared, receiver communication channel is not required to be configured when you are attaching the modules to the receiver adapter.

Regards

[Former Member]

The file is getting picked from the source and request is being place through the receiver channel to webservice  "CC_AsyncSync_Soap_Call" in the ResponseonewayBean am getting the error.

1/2/2014 10:15:39 AM	Information	Message successfully put into the queue
1/2/2014 10:15:39 AM	Information	The message was successfully retrieved from the send queue
1/2/2014 10:15:39 AM	Information	Message status set to DLNG
1/2/2014 10:15:40 AM	Information	Delivering to channel: CC_AsyncSync_Soap_Call
1/2/2014 10:15:40 AM	Information	MP: processing local module localejbs/AF_Modules/RequestResponseBean
1/2/2014 10:15:40 AM	Information	RRB: entering RequestResponseBean
1/2/2014 10:15:40 AM	Information	RRB: forwarding the request message
1/2/2014 10:15:40 AM	Information	RRB: leaving RequestResponseBean
1/2/2014 10:15:40 AM	Information	MP: processing local module localejbs/sap.com/com.sap.aii.af.soapadapter/XISOAPAdapterBean
1/2/2014 10:15:40 AM	Information	XISOAP: Received an XI message for processing
1/2/2014 10:15:40 AM	Information	XI Packaging (Bulk Mode) is not Enabled, Proceeding to the Normal Processing.
1/2/2014 10:15:40 AM	Information	SOAP: request message entering the adapter with user Guest
1/2/2014 10:15:58 AM	Information	SOAP: completed the processing
1/2/2014 10:15:58 AM	Information	SOAP: continuing to response message c5cb39cc-7368-11e3-ad3e-0000001e8e12
1/2/2014 10:15:58 AM	Information	MP: processing local module localejbs/AF_Modules/ResponseOnewayBean
1/2/2014 10:15:58 AM	Error	MP: exception caught with cause com.sap.aii.adapter.xi.routing.RoutingException: InterfaceDetermination did not yield any actual interface
1/2/2014 10:15:58 AM	Error	Exception caught by adapter framework: InterfaceDetermination did not yield any actual interface
1/2/2014 10:15:58 AM	Error	Transmitting the message to endpoint <local> using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.adapter.xi.routing.RoutingException: InterfaceDetermination did not yield any actual interface
1/2/2014 10:15:58 AM	Information	Message status set to WAIT
1/2/2014 10:15:58 AM	Information	The asynchronous message was successfully scheduled to be delivered at Thu Jan 02 10:20:58 IST 2014

[Former Member]

HI ,

Make sure you are getting proper SOAP response which matches to SOAP response structure .

Regards

Venkat

[Former Member]

Hi Mohammed

Checked the interface determination tab of the ICO. Check whether the conditions are satisfied or not.

The log is clearly saying that it was not able to determine the inbound interface from operation mapping.

[iaki_vila]

Hi Mohammed,

Try to set receiverService parameter for "response" module key.

Regards.

[Former Member]

there is no such Interface determination tab in the ICo am working on PI 7.31

[Former Member]

I have added this parameters still the error is coming

[gagandeep_batra]

Hi Mohamed,

Did you crate second ICO  with sender as as virtual receiver.? if not the create it and check

as define in doc:

The second ICO defines the routing from the RFC to the Web Service. In the Inbound Processing, the SOAP sender channel is defined. Note, that in the header of the ICO the corresponding receivercommunication component has to be specified as virtual receiver.(The receiver of the first ICO become Sender and the Sender has to be defined as Virtual Receiver)

Regards

Gagan

[Former Member]

Hi Mohammed

The receiverService should be the receiver busyness system name not the service interface.

Please change that and test.