on 11-11-2013 7:29 AM
Hi,
Please check if this note is applicable.
1171306 - Error with pooled tables when copying a client
Rg,
Nag
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Are you following below note
1630984 - Which Client Copy options to use for SAP Solution Manager to create a new Client ?
Regards
Prakhar
i also try to client copy form 000 clinet it fail and my job log is
Error: Table AIC_DISTRIBUTE error in DDIC - Check table with SE14
The data object could not be created: The type AIC _DISTRIBUTE does not exist.
Error: Table AIC_REL_SOURCE error in DDIC - Check table with SE14
The data object could not be created: The type AIC _REL_SOURCE does not exist.
Error: Table ARC_TRANS_TCURX error in DDIC - Check table with SE14
The data object could not be created: The type ARC _TRANS_TCURX does not exist.
Error: Table CRMC_TBZ5 error in DDIC - Check table with SE14
The data object could not be created: The type CRM C_TBZ5 does not exist.
Error: Table CSU_JOB_PARAMS error in DDIC - Check table with SE14
The data object could not be created: The type CSU _JOB_PARAMS does not exist.
Error: Table DVM_BOF_PACKS error in DDIC - Check table with SE14
The data object could not be created: The type DVM _BOF_PACKS does not exist.
Error: Table DVM_BOF_RUNS error in DDIC - Check table with SE14
The data object could not be created: The type DVM _BOF_RUNS does not exist.
Error: Table DVM_BOF_STATS error in DDIC - Check table with SE14
The data object could not be created: The type DVM _BOF_STATS does not exist.
Error: Table ESH_ADM_EXCFLDS error in DDIC - Check table with SE14
The data object could not be created: The type ESH _ADM_EXCFLDS does not exist.
Error: Table ESH_URL_EXCFLDS error in DDIC - Check table with SE14
The data object could not be created: The type ESH _URL_EXCFLDS does not exist.
Error: Table FDT_TRANS_Q_0010 error in DDIC - Check table with SE14
The data object could not be created: The type FDT _TRANS_Q_0010 does not exist.
Error: Table FDT_TRANS_Q_0011 error in DDIC - Check table with SE14
The data object could not be created: The type FDT _TRANS_Q_0011 does not exist.
Error: Table ICMON_IFC_TH error in DDIC - Check table with SE14
The data object could not be created: The type ICM ON_IFC_TH does not exist.
Error: Table ICMON_IF_TH error in DDIC - Check table with SE14
The data object could not be created: The type ICM ON_IF_TH does not exist.
Error: Table MSSPPACK error in DDIC - Check table with SE14
The data object could not be created: The type MSS PPACK does not exist.
Error: Table SAML2_USED_ASSRT error in DDIC - Check table with SE14
The data object could not be created: The type SAM L2_USED_ASSRT does not exist.
Error: Table SAPFTP_SERVERS error in DDIC - Check table with SE14
The data object could not be created: The type SAP FTP_SERVERS does not exist.
Error: Table SMDPROPVAL error in DDIC - Check table with SE14
The data object could not be created: The type SMD PROPVAL does not exist.
Error: Table SNWD_EPM_SNAPS error in DDIC - Check table with SE14
The data object could not be created: The type SNW D_EPM_SNAPS does not exist.
Error: Table SWF_UNIT_CONF error in DDIC - Check table with SE14
The data object could not be created: The type SWF _UNIT_CONF does not exist.
Error: Table SWF_UNIT_MON error in DDIC - Check table with SE14
The data object could not be created: The type SWF _UNIT_MON does not exist.
Error: Table T77TMCPIC_URLS error in DDIC - Check table with SE14
The data object could not be created: The type T77 TMCPIC_URLS does not exist.
Error: Table TBDBDLSAARG error in DDIC - Check table with SE14
The data object could not be created: The type TBD BDLSAARG does not exist.
Error: Table TBDBDLSADMIN error in DDIC - Check table with SE14
The data object could not be created: The type TBD BDLSADMIN does not exist.
Error: Table TBDBDLSAKEY error in DDIC - Check table with SE14
nainesh
9376998808
Hi Nainesh
I am not sure what exactly you are doing but first you need to create a new client via SCC4.
Once this entry is created then ensure that you have maintained the parameter login/no_automatic_user_sapstar to the value of 0 in the instance profile.
Then logon to the new client using the user SAP*, Once logged in execute transaction SCCL to initiate a local client copy.
Use the following parameters:
Are you doing like above or running in some other client.
Kindly confirm.
Regards
Prakhar
Hi,
You know i check AIC_DISTRIBUTE in my system in 000 and it doesn't exists. I don't have solution manager at the exact patch level to comment on this object AIC_DISTRIBUTE.
What i can suggest you is delete the client 500.
Start from the scratch again.
It can also be some issue with the check program.
Thanks
Rishi Abrol
Hi,
Please look below link
https://help.sap.com/saphelp_nw04/helpdata/en/69/c24c4e4ba111d189750000e8322d00/content.htm
May be this sap note help you . SAPnote 686357
solution:-
Run the program RATPONTC in transaction code SE38 to reset the dictionary and nametab lengths to the correct values. If this program does not yet exist in your system, import it from the attached archive. It contains the data fiels and co files. Copy them to your local harddisk and import them in accordance with Note 13719.
Regards,
Himanshu
Hello
The problem is most likely with the tables not present in the databse but they are in the ABAP dictionary.
Try ceeating those tables in the database using the Tx SE14 and restart client copy.
Regards
RB
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Status of the tables is in upgrade.
Most probably the tables were not created when you upgraded the system.
Check the other systems in the landscape.
Check whether the activation of the table in SE11 changes the status.
I would change the system change option and then see if the option to create table gets activated.
Regards
RB
Hi,
Please check this message: https://scn.sap.com/message/8758977
It refers to note 1248769. You might want to check.
Regards,
Himanshu
Also,
Its showing inconsistency between ABAP Dictionary and the database.
Have you run Test-Run before performing actual client copy ?
Please check the Consistency of affected Tables.
SE11 -> Display Table -> Utilities -> Database Object -> Check
(check DB Object as well as Run time Object)
Please refer this [SAP Note 686357 - Table pool length incorrect after Unicode conversion|https://service.sap.com/sap/support/notes/686357] to get more information. The relevant solution is mentioned there if the pool tables having inconsistency with VARDATA field.
Also refer SAP Note 1171306 - Error with pooled tables when copying a client.
Regards,
Himanshu
Hi Nainesh,
Paste the client copy logs and SM21 logs.
regards
kartik
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi,
Check if the note if it helps.
1768481 - Client copy for system objects might try to delete objects
Note is valid for Release 702 SAPKB70201 - SAPKB70212
Is it a test run or actual run.
DO you have space in database?
Can you please pick one object and see in se14 what is the error.
Thanks
Rishi Abrol
Hi,
Just check the logs why are you not doing client copy test run from 000
you are doing CLIENTCOPY 001 -> 500 . I think that this also can be the cause of it . I try to find the note that says to do initial client copy from 000 and not 001.
Till then can you do test run with 000.
Thanks
Rishi Abrol
Hi,
Please read the below comments.
Client 001 is created as a practice client or a reference client during the initial installation of a system. Apart from this, it is no different to other clients. Therefore, it is dealt with in the same way as every other customer client.
The Solution Manager up to Version 3. 2 is an exception. In this case, client 000 does not have Customizing for setting up the service desk. You then have to use client 001 as a copy template. The error is corrected with Solution Manager 4.0.
Another exception is NetWeaver as of Version 2004S. With a new installation, a client 001 is created to provide storage for the Java users. If necessary, you can copy the users from client 001 with a client copy. However, we still urgently recommend that you use client 000 as a copy template for Customizing. This applies especially to all products that run on NetWeaver (such as ECC). Some incorrect installation guides are unfortunately still available. Obtain the latest version, if necessary.
After the copy, you may have to log onto the J2EE Engine and set the ume.r3.connection.master.client parameter on the new PI/XI client. For more information, see Note 937323.
So try test run and tell me what is the result when you do client copy test run with 000.
Thanks
Rishi Abrol
Hi Nainesh,
Please paste the client copy logs from scc3.
regards
kartik
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
86 | |
10 | |
10 | |
10 | |
7 | |
6 | |
6 | |
5 | |
4 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.