on 11-04-2013 3:31 PM
Hi Friends,
I have a issue where the Incorrect Batch has been wrongly entered while doing Goods Receipt from Vendor.
The system has created a new Inspection Lot automatically for wrong Batch with lot status UD ICCO HUM
The system already has an inspection lot for correct batch and UD has been done.
The stock still exist in the QI stock and same stock shows in wrong batch in QI.
The user tries to do stock transfer from Batch to Batch using MB1B of MVt type 309 and gets warning message Batch is already in stock
Could you please suggest the correct way to resolve this issue.
If its a warning, it's just a warning, you should be able hit <Enter> and continue through the error.
It sounds like you did both UD's. Is that correct? But if the stock is still in QI than you must not have done a stock posting for one of the lots. Once the UD has been done with HU's you are pretty much stuck. I do not believe the UD reversal program works with HU's.
So you need to complete the stock posting, and then you standard material movements to make your necessary adjustments.
Craig
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi,
While doing goods receipt if the batch number is put wrongly then you can cancel the GR and the inspection lot will be canceled with lot status LTCA. This works if there are no results against the inspection lot. After this you can do the GR with correct batch number.
CSN
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
85 | |
7 | |
6 | |
4 | |
3 | |
3 | |
3 | |
3 | |
3 | |
2 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.