on 10-06-2013 4:36 AM
hi Nainesh,
Please go through this note. It might be helpful
Note 396309 - Dispatcher remains yellow, although the system is running
Regards,
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
please read this note...
point no 35/52/57
Note 877795 - Problems w/ sapstartsrv as of Release 7.00 & 6.40 patch 169
also please read below note
Note 1346857 - disp+work process shown as yellow in NWA even when running
okies try this things.........
Hi Nainesh,
Please check this document and find out why J2EE engine is not running. http://help.sap.com/saphelp_nw70/helpdata/en/28/302c4142aef623e10000000a155106/content.htm
Hello
If you have tried all the suggestions provide above then you may raise an OSS message.
Regards
RB
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi
Could you check the 'DEV_DISP' log file?
Thanks
Sriram
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Dear Sriram
I send Data log of DEV_DISP
---------------------------------------------------
trc file: "dev_disp", trc level: 1, release: "720"
---------------------------------------------------
sysno 00
sid ARP
systemid 560 (PC with Windows NT)
relno 7200
patchlevel 0
patchno 401
intno 20020600
make multithreaded, Unicode, optimized
profile D:\usr\sap\ARP\SYS\profile\ARP_DVEBMGS00_u1srv002
pid 4788
kernel runs with dp version 138000(ext=119000) (@(#) DPLIB-INT-VERSION-138000-UC)
length of sys_adm_ext is 588 bytes
*** SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 4788) [dpxxdisp.c 1320]
shared lib "dw_xml.dll" version 401 successfully loaded
shared lib "dw_xtc.dll" version 401 successfully loaded
shared lib "dw_stl.dll" version 401 successfully loaded
shared lib "dw_gui.dll" version 401 successfully loaded
shared lib "dw_mdm.dll" version 401 successfully loaded
shared lib "dw_rndrt.dll" version 401 successfully loaded
shared lib "dw_abp.dll" version 401 successfully loaded
shared lib "dw_sym.dll" version 401 successfully loaded
shared lib "dw_aci.dll" version 401 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
rdisp/dynamic_wp_check : 1
rdisp/calculateLoadAverage : 1
Sun Oct 06 09:30:08 2013
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 6438]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: write dp-profile-values into sys_adm_ext
DpIPCInit2: start server >u1srv002_ARP_00 <
DpShMCreate: sizeof(wp_adm) 29880 (1992)
DpShMCreate: sizeof(tm_adm) 4323912 (21512)
DpShMCreate: sizeof(wp_ca_adm) 32000 (64)
DpShMCreate: sizeof(appc_ca_adm) 32000 (64)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/1356056/1356064
DpShMCreate: sizeof(comm_adm) 1356064 (2704)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (296)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (80)
DpShMCreate: sizeof(vmc_adm) 0 (1800)
DpShMCreate: sizeof(wall_adm) (40056/38200/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: sizeof(j2ee_adm) 3936
DpShMCreate: SHM_DP_ADM_KEY (addr: 09FF0040, size: 5869248)
DpShMCreate: allocated sys_adm at 09FF0048
DpShMCreate: allocated wp_adm_list at 09FF2F98
DpShMCreate: allocated wp_adm at 09FF3090
DpShMCreate: allocated tm_adm_list at 09FFA550
DpShMCreate: allocated tm_adm at 09FFA578
DpShMCreate: allocated wp_ca_adm at 0A419FC8
DpShMCreate: allocated appc_ca_adm at 0A421CD0
DpShMCreate: allocated comm_adm at 0A4299D8
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0A574B00
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated gw_adm at 0A574B58
DpShMCreate: allocated j2ee_adm at 0A574B90
DpShMCreate: allocated ca_info at 0A575AF8
DpShMCreate: allocated wall_adm at 0A575B78
DpCommAttachTable: attached comm table (header=0A4299D8/ft=0A4299E0)
DpSysAdmIntInit: initialize sys_adm
rdisp/test_roll : roll strategy is DP_NORMAL_ROLL
dia token check not active (6 token)
MBUF state OFF
DpCommInitTable: init table for 500 entries
DpRqQInit: keep protect_queue / slots_per_queue 0 / 2001 in sys_adm
rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> EsILock: use spinlock for locking
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE
MPI: dynamic quotas disabled.
MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
*** WARNING => DpJ2eeStart: profile parameter 'system/type' not correctly set to start J2EE; use 'J2EE' for Java only and 'DS' for double stack instance (info=0x101) [dpxxj2ee.c 343]
J2EE server info
start = TRUE
state = STARTED
pid = 3148
argv[0] = D:\usr\sap\ARP\DVEBMGS00\exe\jcontrol.EXE
argv[1] = D:\usr\sap\ARP\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\ARP\SYS\profile\ARP_DVEBMGS00_u1srv002
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=65000
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=ARP
argv[7] = -DSAPMYNAME=u1srv002_ARP_00
argv[8] = -DSAPPROFILE=D:\usr\sap\ARP\SYS\profile\ARP_DVEBMGS00_u1srv002
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.4 3.4 4.1) [dpxxdisp.c 1706]
***LOG Q0K=> DpMsAttach, mscon ( u1srv002) [dpxxdisp.c 12674]
MBUF state LOADING
DpStartStopMsg: send start message (myname is >u1srv002_ARP_00 <)
DpStartStopMsg: start msg sent
CCMS: Initialized monitoring segment of size 60000000.
CCMS: Initialized CCMS Headers in the shared monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
CCMS: AlMsUpload called by wp 1024.
Sun Oct 06 09:30:09 2013
CCMS: AlMsUpload successful for D:\usr\sap\ARP\DVEBMGS00\log\ALMTTREE.DAT (2643 MTEs).
Sun Oct 06 09:30:10 2013
CCMS: start to initalize 3.X shared alert area (first segment).
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1296]
MBUF state ACTIVE
DpWpBlksLow: max wp blocks in queue is 400 (80 %)
MBUF component UP
DpMsgProcess: 1 server in MBUF
DpAppcBlksLow: max appc blocks in queue is 250 (50 %)
Sun Oct 06 09:30:11 2013
DpJ2eeLogin: j2ee state = CONNECTED
Sun Oct 06 09:30:23 2013
DpModState: change server state from STARTING to ACTIVE
Sun Oct 06 09:32:20 2013
J2EE server info
start = TRUE
state = ACTIVE
pid = 3148
load balance = 1
start_lazy = 0
start_control = SAP J2EE startup framework
Hi
Thanks for you info
*** WARNING => DpJ2eeStart: profile parameter 'system/type' not correctly set to start J2EE; use 'J2EE' for Java only and 'DS' for double stack instance (info=0x101)
Kindly refer the SAP KBA 1603834 - ADD IN J2EE engine fails to startup due to system/type
profile parameter not set
Thanks
Sriram
Dear Sriram
You say that I add system/type = DS in my instance Profile ....
I pest my current instance profile
exe/saposcol | C:\Program Files\SAP\hostctrl\exe\saposcol.exe |
rdisp/max_wprun_time | 1200 |
SAPSYSTEMNAME | ARP |
SAPGLOBALHOST | u1srv002 |
SAPSYSTEM | 00 |
INSTANCE_NAME | DVEBMGS00 |
DIR_CT_RUN | $(DIR_EXE_ROOT)\$(OS_UNICODE)\NTI386 |
DIR_EXECUTABLE | $(DIR_INSTANCE)\exe |
jstartup/trimming_properties | off |
jstartup/protocol | on |
jstartup/vm/home | C:\j2sdk1.4.2_13 |
jstartup/max_caches | 500 |
jstartup/release | 700 |
jstartup/instance_properties | $(jstartup/j2ee_properties);$(jstartup/sdm_properties) |
j2ee/dbdriver | $(DIR_EXECUTABLE)\ojdbc14.jar |
PHYS_MEMSIZE | 512 |
rdisp/wp_no_dia | 6 |
rdisp/wp_no_btc | 3 |
rdisp/j2ee_start_control | 1 |
rdisp/j2ee_start | 1 |
rdisp/j2ee_libpath | $(DIR_EXECUTABLE) |
exe/j2ee | $(DIR_EXECUTABLE)\jcontrol$(FT_EXE) |
rdisp/j2ee_timeout | 600 |
rdisp/frfc_fallback | on |
icm/HTTP/j2ee_0 | PREFIX=/,HOST=localhost,CONN=0-500,PORT=5$$00 |
icm/server_port_0 | PROT=HTTP,PORT=80$$ |
ms/server_port_0 | PROT=HTTP,PORT=81$$ |
rdisp/wp_no_enq | 1 |
rdisp/wp_no_vb | 1 |
rdisp/wp_no_vb2 | 1 |
rdisp/wp_no_spo | 1 |
DIR_CLIENT_ORAHOME | $(DIR_EXECUTABLE) |
j2ee/instance_id | ID0018526 |
Please Say me
Nainesh
9376998808
Hi Nainesh
Just add the instance profile parameter " system/type = DS”. and then restart the SAP Instance check the status green or yellow? (What you are mention the screen reference in the first message)
and also there no abnormal thing in the instance profile.
Is it new SAP system?
Regards
Sriram
dev_W0 File
---------------------------------------------------
trc file: "dev_w0", trc level: 1, release: "720"
---------------------------------------------------
*
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS all, MJ
*
M sysno 00
M sid ARP
M systemid 560 (PC with Windows NT)
M relno 7200
M patchlevel 0
M patchno 401
M intno 20020600
M make multithreaded, Unicode, optimized
M profile D:\usr\sap\ARP\SYS\profile\ARP_DVEBMGS00_u1srv002
M pid 5740
M
M kernel runs with dp version 138000(ext=119000) (@(#) DPLIB-INT-VERSION-138000-UC)
M length of sys_adm_ext is 588 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 5740) [dpxxdisp.c 1382]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpSysAdmExtCreate: J2EE Engine running with this server
M DpIPCInit2: read dp-profile-values from sys_adm_ext
M DpShMCreate: sizeof(wp_adm) 29880 (1992)
M DpShMCreate: sizeof(tm_adm) 4323912 (21512)
M DpShMCreate: sizeof(wp_ca_adm) 32000 (64)
M DpShMCreate: sizeof(appc_ca_adm) 32000 (64)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/1356056/1356064
M DpShMCreate: sizeof(comm_adm) 1356064 (2704)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (296)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (80)
M DpShMCreate: sizeof(vmc_adm) 0 (1800)
M DpShMCreate: sizeof(wall_adm) (40056/38200/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: sizeof(j2ee_adm) 3936
M DpShMCreate: SHM_DP_ADM_KEY (addr: 0A840040, size: 5869248)
M DpShMCreate: allocated sys_adm at 0A840048
M DpShMCreate: allocated wp_adm_list at 0A842F98
M DpShMCreate: allocated wp_adm at 0A843090
M DpShMCreate: allocated tm_adm_list at 0A84A550
M DpShMCreate: allocated tm_adm at 0A84A578
M DpShMCreate: allocated wp_ca_adm at 0AC69FC8
M DpShMCreate: allocated appc_ca_adm at 0AC71CD0
M DpShMCreate: allocated comm_adm at 0AC799D8
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 0ADC4B00
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated gw_adm at 0ADC4B58
M DpShMCreate: allocated j2ee_adm at 0ADC4B90
M DpShMCreate: allocated ca_info at 0ADC5AF8
M DpShMCreate: allocated wall_adm at 0ADC5B78
M DpCommAttachTable: attached comm table (header=0AC799D8/ft=0AC799E0)
M DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 from sys_adm
M rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X <ES> EsILock: use spinlock for locking
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
X mm.dump: set maximum dump mem to 96 MB
M DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE
M
M Mon Oct 07 09:04:22 2013
M ThStart: taskhandler started
M ThInit: initializing DIA work process W0
M
M Mon Oct 07 09:04:23 2013
M ThInit: running on host u1srv002
M
M Mon Oct 07 09:04:26 2013
M calling db_connect ...
B Loading DB library 'D:\usr\sap\ARP\DVEBMGS00\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\ARP\DVEBMGS00\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\ARP\DVEBMGS00\exe\dboraslib.dll' is "720.00", patchlevel (0.327)
C Prepending D:\usr\sap\ARP\DVEBMGS00\exe to Path.
C Register application info.
C Oracle client version: 10.2.0.2.0, (dbsl 720 291112, UNICODE[2])
C Detailed Oracle client (patch) info not available.
C Client NLS setting (by OCINlsGetInfo(con=0)): 'AMERICAN_AMERICA.UTF16'
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@ARP on connection 0 (nls 0) ... (dbsl 720 291112, UNICODE[2])
C Attaching to database server ARP (con=0, svchp=7CD1ED8, srvhp=7CD2FA4)
C Starting user session: OCISessionBegin(con=0, usr='/', svc=7CD1ED8, srv=7CD2FA4, usr=7BAC6F8)
C Now '/@ARP' is connected: con=0, nls=0, session=71, time='2013-10-07 09:04:26'
C Got SAPSR3's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con=0, svc=7CD1ED8, usr=7BAC6F8)
C Disconnected (con=0) from ORACLE.
C Connecting as SAPSR3/<pwd>@ARP on connection 0 (nls 0) ... (dbsl 720 291112, UNICODE[2])
C Starting user session: OCISessionBegin(con=0, usr='SAPSR3', svc=7CD1ED8, srv=7CD2FA4, usr=7BAC6F8)
C Now 'SAPSR3/<pwd>@ARP' is connected: con=0, nls=0, session=71, time='2013-10-07 09:04:26'
C DB instance ARP is running on U1SRV002 with ORACLE version 11.2.0.2.0 since OCT 03, 2013, 20:03:23.
C con=0, V$NLS_PARAMETERS: NLS_LANG=AMERICAN_AMERICA.UTF8, NLS_NCHAR=UTF8
C Nls CharacterSet NationalCharSet EnvHp ErrHp ErrBt
C 0 UTF16 AL16UTF16 7CCD068 7CD2704 7CD1F8C
B Connection 0 opened (DBSL handle 0)
C DbSlControl(DBSL_CMD_SAPRELEASE_SET,abap='700')
M ThInit: db_connect o.k.
M ICT: exclude compression: *.zip,*.rar,*.arj,*.z,*.gz,*.tar,*.lzh,*.cab,*.hqx,*.ace,*.jar,*.ear,*.war,*.css,*.pdf,*.gzip,*.uue,*.bz2,*.iso,*.sda,*.sar,*.gif,*.png,*.swc,*.swf
I
I Mon Oct 07 09:04:30 2013
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0F3A0040, size: 4400000)
M SHM_ROLL_AREA (addr: CA010040, size: 61440000)
M SHM_PAGING_AREA (addr: 10F50040, size: 32768000)
M SHM_ROLL_ADM (addr: 0F7E0040, size: 635344)
M SHM_PAGING_ADM (addr: 0F880040, size: 787488)
M ThCreateNoBuffer allocated 548152 bytes for 1000 entries at 0F950040
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 31056 bytes (50 server) at 0F9E0040
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X ES initialized.
X mm.dump: set maximum dump mem to 96 MB
B db_con_shm_ini: WP_ID = 0, WP_CNT = 15, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 17F900C8, size: 30000000, end: 19C2C448)
B dbtbxbuf: Buffer TABLP (addr: 19C300C8, size: 10240000, end: 1A5F40C8)
B dbsync[db_syinit]: successfully attached to shared memory, sync_adm_p = 0FDD0040
B dbsync[db_syinit]: Buffer synchronisation started with
B sync_concept = SEQ_NR
B sendon = 0
B bufreftime = 120
B max_gap_wait_time = 60
B ddlog_del_time = 60
B last_counter = -2147004575
B oldest_gap = (2147483647,00000000000000)
B time_of_last_sync = 20131007090429
B MySysId = 'u1srv002 00'
B dbexpbuf[EXP_SHB]: buffer EIBUF installed with
B semkey = 35
B shmkey = 54
B wp_n = 15
B sclass = 0
B block_length = 256
B max_objects = 2000
B max_obj_size = 876128
B pref_obj_size = 0
B est_large_obj_size = 16384
B free_vec_lg = 65
B hash_vec_size = 4001
B buffer_l = 4194304
B max_blocks = 13691
B free_blocks = 13691
B mutex_n = 4001
B max_mtx_wait_time = 17000
B recovery_delay = 500000
B tracing = 0
B force_checks = 0
B protect_shm = 0
B dbexpbuf[EXP_SHM]: buffer ESM installed with
B semkey = 56
B shmkey = 65
B wp_n = 15
B sclass = 0
B block_length = 256
B max_objects = 2000
B max_obj_size = 876128
B pref_obj_size = 0
B est_large_obj_size = 16384
B free_vec_lg = 65
B hash_vec_size = 4001
B buffer_l = 4194304
B max_blocks = 13691
B free_blocks = 13691
B mutex_n = 4001
B max_mtx_wait_time = 17000
B recovery_delay = 500000
B tracing = 0
B force_checks = 0
B protect_shm = 0
B dbexpbuf[EXP_CUA]: buffer CUA installed with
B semkey = 30
B shmkey = 47
B wp_n = 15
B sclass = 10
B block_length = 512
B max_objects = 1500
B max_obj_size = 638368
B pref_obj_size = 0
B est_large_obj_size = 98304
B free_vec_lg = 193
B hash_vec_size = 3001
B buffer_l = 3072000
B max_blocks = 4988
B free_blocks = 4988
B mutex_n = 3001
B max_mtx_wait_time = 17000
B recovery_delay = 500000
B tracing = 0
B force_checks = 0
B protect_shm = 0
B dbexpbuf[EXP_OTR]: buffer OTR installed with
B semkey = 55
B shmkey = 64
B wp_n = 15
B sclass = 13
B block_length = 256
B max_objects = 2000
B max_obj_size = 876128
B pref_obj_size = 0
B est_large_obj_size = 20480
B free_vec_lg = 81
B hash_vec_size = 4001
B buffer_l = 4194304
B max_blocks = 13691
B free_blocks = 13691
B mutex_n = 4001
B max_mtx_wait_time = 17000
B recovery_delay = 500000
B tracing = 0
B force_checks = 0
B protect_shm = 0
I MPI: dynamic quotas disabled.
I MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
M rdisp/thwpsf_critical_path : -1 -> 0
M CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.
M CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.
G RelWritePermissionForShm( pLocation = 120, pEnforce = 0 )
G GetWritePermissionForShm( pLocation = 99, pEnforce = 1 )
G RelWritePermissionForShm( pLocation = 100, pEnforce = 1 )
S *** init spool environment
S TSPEVJOB updates outside critical section: event_update_nocsec = 1
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 20859230
S
S Mon Oct 07 09:04:31 2013
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 24AA00A8
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 24AA04F0
S using messages for server info
S size of spec char cache entry: 297028 bytes (timeout 100 sec)
S size of open spool request entry: 2480 bytes
S immediate print option for implicitely closed spool requests is disabled
C -> 'OCI_10201_SHARE, 10.2.0.2.0'
A ***GENER* Trace switched on ***
A
A ---PXA-------------------------------------------
A PXA INITIALIZATION
A PXA: Locked PXA-Semaphore.
A System page size: 4kb, total admin_size: 22196kb, dir_size: 21432kb.
A Attached to PXA (address CDAB0040, size 300000K, 1 fragments of 277804K )
A PXA allocated (address CDAB0040, size 300000K)
A abap/pxa = shared protect gen_remote
A PXA: checking structure sizes: 712|264|8
A PXA INITIALIZATION FINISHED
A ---PXA-------------------------------------------
A
A ATRA: pfclock execution time = 0
A ABAP ShmAdm attached (addr=FAD1A000 leng=20955136 end=FC116000)
A >> Shm MMADM area (addr=FB1B10B8 leng=125120 end=FB1CF978)
A >> Shm MMDAT area (addr=FB1D0000 leng=16015360 end=FC116000)
A RFC Destination> destination u1srv002_ARP_00 host u1srv002 system ARP systnr 0 (u1srv002_ARP_00)
A RFC Options> H=u1srv002,S=00,d=2,
A
A Mon Oct 07 09:04:33 2013
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
H HTTP> Parameter icf/ssocookie_mandatory set to 0
B dbtran INFO (init_connection '<DEFAULT>' [ORACLE:720.00]):
B max_blocking_factor = 5, min_blocking_factor = 5,
B max_in_blocking_factor = 5, min_in_blocking_factor = 5,
B max_union_blocking_factor = 5, min_union_blocking_factor = 5,
B prefer_union_all = 0, prefer_join = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 1,
B convert AVG = 0, alias table FUPD = 0,
B escape_as_literal = 1,
B select * =0x0f, character encoding = STD / <none>:-,
B use_hints = abap->1, dbif->0x1, upto->4294967295
M ThrCreateShObjects allocated 31202 bytes at 0FF90040
Y dyWpInit
Y ztta/dynpro_ara 800000
Y ztta/cua_ara 500000
Y ztta/diag_ara 250000
N SsfSapSecin: putenv(SECUDIR=D:\usr\sap\ARP\DVEBMGS00\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF library is D:\usr\sap\ARP\DVEBMGS00\exe\sapsecu.dll .
N ===...SSF default hash algorithm is SHA1 .
N ===...SSF default symmetric encryption algorithm is DES-CBC .
N ===...SECUDIR="D:\usr\sap\ARP\DVEBMGS00\sec"
N ===...loading of Security Toolkit completed with rc 5 (SSF_SUP_NOTALLFUNCTIONS).
N === SAPSECULIB Version 5.4.28M-6
N =================================================
N
N Mon Oct 07 09:04:36 2013
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 2
W ITS Plugin: Release: 720, [7200.0.401.20020600]
W ITS Plugin: Int.version, [33]
W ITS Plugin: Feature set: [30]
W ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
N SignInit: Security Session Management cannot be used (ABAP parts are missing, note 1477428)
N VSI: WP init in ABAP VM completed with rc=0
E EnqLockTableAttach2: attach to lock table (size = 16777216)
E EnqLockTableMapToLocalContext: enque/use_pfclock2 = FALSE
E EnqId_Initialize: local EnqId initialization o.k.
M rdisp/thsend_order : -1 -> 0
M ThISend: set thsend_order to 0
M 07.10.2013 03:34:36.922 PID=5740, TID=3452 SapTimer info. v1.119 SynchCount:0 , OwnerPid: 4824, ErrsCount: 0, SapTime-WindowsUtcTime=+5 millisec (max=-4), Nosync=20 sec, SynchsPerDay=0.000000, MaxQpcTimeMinusWindowsTimeMismatch: +0 millisec, TotalTimeCorrection=+0 millisec, QpcTime-WindowsUtcTime=+6 millisec (*)
A
A Mon Oct 07 09:04:53 2013
A UpdateProfile (new settings): off,krn_impl,(no dyn check),(no logging),(no stat err),(local generation),(no commit)
A UpdateProfile (new exceptions): (tmp_err),(home_err),(local_err)
A UpdateProfile (new version): 0
A ***GENER* Trace switched off ***
B
B Mon Oct 07 09:04:54 2013
B dbdynpdb2: no VERSION column found in table DYNPSOURCE
E Enqueue Info: enque/use_pfclock2 = FALSE
E Enqueue Info: row condense enabled
A
A Mon Oct 07 09:04:56 2013
A EXCP> Attribute IS_RESUMABLE not found in class CX_ROOT.
M
M Mon Oct 07 09:05:09 2013
M SecAudit(rsauinit): WP attached to existing shared memory.
M SecAudit(RsauShmInit): addr of SHM for Audit.. = 0FFF0040
M SecAudit(RsauShmInit): addr of RSAUSHM........ = 0FFF1040
M SecAudit(RsauShmInit): addr of RSAUSLOTINFO... = 0FFF1650
M SecAudit(RsauShmInit): addr of RSAUSLOTS...... = 0FFF1660
G GetWritePermissionForShm( pLocation = 281, pEnforce = 0 )
G
G Mon Oct 07 09:05:10 2013
G RelWritePermissionForShm( pLocation = 277, pEnforce = 0 )
G GetWritePermissionForShm( pLocation = 281, pEnforce = 0 )
G RelWritePermissionForShm( pLocation = 277, pEnforce = 0 )
G
G Mon Oct 07 09:05:11 2013
G GetWritePermissionForShm( pLocation = 283, pEnforce = 0 )
G RelWritePermissionForShm( pLocation = 277, pEnforce = 0 )
G
G Mon Oct 07 09:05:13 2013
G GetWritePermissionForShm( pLocation = 281, pEnforce = 0 )
G RelWritePermissionForShm( pLocation = 277, pEnforce = 0 )
M
M Mon Oct 07 09:05:25 2013
M Deactivate ASTAT hyper index locking
A
A Mon Oct 07 09:06:36 2013
A RFC FRFC> fallback on the central gateway u1srv002 sapgw00 activ
S
S Mon Oct 07 09:29:41 2013
S found spool memory service RSPO-ACTIONS at 24AA9EE0
D
D Mon Oct 07 09:36:09 2013
D GuiStatus: table test
D GuiStatus set generate inline ts >20131007040609,726<
B dbmyclu : info : my major identification is 3960540435, minor one 0.
B dbmyclu : info : Time Reference is 1.12.2001 00:00:00h GMT.
B dbmyclu : info : my initial uuid is E32F05CB87CBCEF19E8778E7D1D6DFD3.
B dbmyclu : info : current optimistic cluster level: 0
B dbmyclu : info : pessimistic reads set to 2.
D GuiStatus clear generate inline ts >20131007040609,820<
M
M Mon Oct 07 09:36:42 2013
M ThEMsgArrived: sysmsg_for_rfc = 0
L
L Mon Oct 07 09:37:13 2013
L SSMJOB: > There are no active profiles of criteria type 'SSMJOB'
L
L Mon Oct 07 09:39:33 2013
L SSMJOB: > There are no active profiles of criteria type 'SSMJOB'
A
A Mon Oct 07 10:04:41 2013
A Localtime1 1381120481, Loaltime2 1381120481, Localtime3 1381120481
A DBTime1 1381120481, DBTime2 1381120481
A Avarage loctime 1381120481, Avarage DBTime 1381120481, Diff 0
A Returncodes codes db_time 0 0 0
A Local time adjusted (0 sec).
Hello
Check this SAP note and see whether the LM-TOOLS are in affected releases.
If yes then update the LM-TOOLS and check whether it helps.
Note 1346857 - disp+work process shown as yellow in NWA even when running
Regards
RB
User | Count |
---|---|
85 | |
23 | |
11 | |
9 | |
8 | |
5 | |
5 | |
5 | |
5 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.