on 10-01-2013 7:24 AM
Dear all,
I installed minisap netweaver 2.0 in my laptop, after installation i ran sgen, during sgen i tried to open rz10 in same screen..
the system got struck and now not able to up the system, am getting the error dispatcher is standstill,,..
please anybody help me to overcome this problem...
regards with
vinodh seemakurthi
Hello
Install MaxDB Studio on the machine and connect the database to it.
Check the log area and data area using the Studio Manager.
Regards
RB
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Vinodh
Just restart the system an then try
Thanks
Sriram
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Vinodh,
If it is because of log area becoming full, please go through the below blog and take the log backup which will solve your issue.
http://wiki.scn.sap.com/wiki/display/MaxDB/Log+Area+Full
regards
kartik
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi,
Can you please check the log directory. If you would have not scheduled the log backup ,log will get full and no more write in the database.
This is always an issue when you run SGEN.
So please check that the database logs are not full.
Thanks
Rishi Abrol
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Vinoth,
1. Please paste the output of R3trans -d.
2. Also paste the logs of dev_ms,dev_disp,dev_w0.
3. Also share the details of OS and DB you are using.
4. If oracle is DB then, check whther litner is up and running?
Regards,
Himanshu
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Himanshu
I am pasting dev_w0
---------------------------------------------------
trc file: "dev_w0", trc level: 1, release: "720"
---------------------------------------------------
*
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS all, MJ
*
M sysno 00
M sid NSP
M systemid 562 (PC with Windows NT)
M relno 7200
M patchlevel 0
M patchno 201
M intno 20020600
M make multithreaded, Unicode, 64 bit, optimized
M profile \\vinodh\sapmnt\NSP\SYS\profile\NSP_DVEBMGS00_vinodh
M pid 5752
M
M kernel runs with dp version 133000(ext=118000) (@(#) DPLIB-INT-VERSION-133000-UC)
M length of sys_adm_ext is 588 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 5752) [dpxxdisp.c 1377]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpIPCInit2: read dp-profile-values from sys_adm_ext
M DpShMCreate: sizeof(wp_adm) 31696 (2264)
M DpShMCreate: sizeof(tm_adm) 5517056 (27448)
M DpShMCreate: sizeof(wp_ca_adm) 64000 (64)
M DpShMCreate: sizeof(appc_ca_adm) 64000 (64)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/584064/584080
M DpShMCreate: sizeof(comm_adm) 584080 (1144)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (296)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (80)
M DpShMCreate: sizeof(vmc_adm) 0 (2152)
M DpShMCreate: sizeof(wall_adm) (41664/42896/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: sizeof(j2ee_adm) 3952
M DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000010150050, size: 6363600)
M DpShMCreate: allocated sys_adm at 0000000010150060
M DpShMCreate: allocated wp_adm_list at 0000000010153070
M DpShMCreate: allocated wp_adm at 0000000010153260
M DpShMCreate: allocated tm_adm_list at 000000001015AE40
M DpShMCreate: allocated tm_adm at 000000001015AE90
M DpShMCreate: allocated wp_ca_adm at 000000001069DDA0
M DpShMCreate: allocated appc_ca_adm at 00000000106AD7B0
M DpShMCreate: allocated comm_adm at 00000000106BD1C0
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000001074BB60
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated gw_adm at 000000001074BC10
M DpShMCreate: allocated j2ee_adm at 000000001074BC50
M DpShMCreate: allocated ca_info at 000000001074CBD0
M DpShMCreate: allocated wall_adm at 000000001074CC60
M DpCommAttachTable: attached comm table (header=00000000106BD1C0/ft=00000000106BD1D0)
M DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 from sys_adm
M
M Tue Oct 01 16:21:53 2013
M rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X <ES> EsILock: use spinlock for locking
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
X mm.dump: set maximum dump mem to 96 MB
M DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE
M ThStart: taskhandler started
M ThInit: initializing DIA work process W0
M
M Tue Oct 01 16:21:54 2013
M ThInit: running on host vinodh
M
M Tue Oct 01 16:21:55 2013
M calling db_connect ...
B Loading DB library 'E:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' ...
B Library 'E:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' loaded
B Version of 'E:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' is "720.00", patchlevel (0.201)
C
C DBSDBSLIB : version 720.00, patch 0.201 (Make PL 0.201)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C (0.201) Take care of warnings during database connect (note 1600066)
C (0.117) Define a primary key on the temp tables for R3szchk (note 1606260)
C (0.114) Support of MaxDB 7.8 and 7.9 (note 1653058)
C (0.103) Close all lob locators at end of the transaction (note 1626591)
C (0.101) Fix for unknown table __TABLE_SIZES_ (R3szchk) (note 1619504)
C (0.098) Use filesystem counter for R3szchk (note 1606260)
C (0.092) Secondary connection to HANA (note 1481256)
C (0.089) UPDSTAT with SAPSYSTEMNAME longer as 3 characters (note 1584921)
C (0.081) No UPSERT on WBCROSSGT (note 1521468)
C (0.080) New feature batch streaming (note 1340617)
C
C
C Loading SQLDBC client runtime ...
C SQLDBC Module : E:\sapdb\clients\NSP\pgm\libSQLDBC77.dll
C SQLDBC SDK : SQLDBC.H 7.9.7 BUILD 010-123-243-190
C SQLDBC Runtime : libSQLDBC 7.9.7 BUILD 010-123-243-190
C SQLDBC client runtime is MaxDB 7.9.7.010 CL 243190
C SQLDBC supports new DECIMAL interface : 1
C SQLDBC supports VARIABLE INPUT data : 1
C SQLDBC supports VARIABLE OUTPUT data : 1
C SQLDBC supports Multiple Streams : 1
C SQLDBC supports LOB LOCATOR KEEPALIVE : 1
C SQLDBC supports LOB LOCATOR COPY : 1
C SQLDBC supports BULK SELECT with LOBS : 1
C SQLDBC supports BATCH STREAM : 1
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C Attach to SAP DB : Kernel 7.9.07 Build 010-123-243-190
C Database release is SAP DB 7.9.07.010
C INFO : Database 'NSP' instance is running on 'vinodh'
C DB supports UPSERT SQL syntax : 1
C DB supports new EXPAND syntax : 1
C DB supports LOB locators : 1
C DB uses MVCC support : 0
C DB max. input host variables : 2000
C DB max. statement length : 65535
C UPSERT is disabled for : WBCROSSGT
C INFO : SAP DB Packet_Size = 131072
C INFO : SAP DB Min_Reply_Size = 4096
C INFO : SAP DB Comm_Size = 126976
C INFO : DBSL buffer size = 126976
C INFO : SAP DB MaxLocks = 300000
C INFO : Connect to DB as 'SAPNSP'
C Command info enabled
C Now I'm connected to MaxDB
C 00: vinodh-NSP, since=20131001162155, ABAP= <unknown> (0)
B Connection 0 opened (DBSL handle 0)
C INFO : SAP RELEASE (DB) = 731
M ThInit: db_connect o.k.
M ICT: exclude compression: *.zip,*.rar,*.arj,*.z,*.gz,*.tar,*.lzh,*.cab,*.hqx,*.ace,*.jar,*.ear,*.war,*.css,*.pdf,*.gzip,*.uue,*.bz2,*.iso,*.sda,*.sar,*.gif,*.png,*.swc,*.swf
M
M Tue Oct 01 16:26:23 2013
M DpSigInt: caught signal 2
M in_ThErrHandle: 1
M ThSigHandler: signal (step 1, th_errno 11, action 2, signal no. 2)
M ThIErrHandle: new stat of W0 is WP_SHUTDOWN
M ThIErrHandle: I'm during shutdown
M PfStatDisconnect: disconnect statistics
M ThIErrHandle: action changed to 2
M ThIErrHandle: entering ThSetStatError
M ThShutDownServer: shutdown server
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workp. 0 5752) [dpnttool.c 339]
M SemCleanup: Reset waiting on semaphore (Key:10/Slot:9)
this is dev_ms
---------------------------------------------------
trc file: "dev_ms", trc level: 1, release: "720"
---------------------------------------------------
[Thr 5856] Tue Oct 01 16:21:45 2013
[Thr 5856] ms/http_max_clients = 500 -> 500
[Thr 5856] MsSSetTrcLog: trc logging active, max size = 52428800 bytes
systemid 562 (PC with Windows NT)
relno 7200
patchlevel 0
patchno 101
intno 20020600
make multithreaded, Unicode, 64 bit, optimized
pid 4936
[Thr 5856] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 4936) [msxxserv.c 2278]
[Thr 5856] load acl file = E:\usr\sap\NSP\SYS\global\ms_acl_info.DAT
[Thr 5856] MsGetOwnIpAddr: my host addresses are :
[Thr 5856] 1 : [192.168.122.10] vinodh (HOSTNAME)
[Thr 5856] 2 : [127.0.0.1] vinodh (LOCALHOST)
[Thr 5856] Tue Oct 01 16:21:54 2013
[Thr 5856] 3 : [169.254.86.69] 169.254.86.69 (NILIST)
[Thr 5856] Tue Oct 01 16:22:03 2013
[Thr 5856] 4 : [169.254.68.145] 169.254.68.145 (NILIST)
[Thr 5856] 5 : [192.168.1.107] vinodh (NILIST)
[Thr 5856] Tue Oct 01 16:22:11 2013
[Thr 5856] 6 : [169.254.29.221] 169.254.29.221 (NILIST)
[Thr 5856] MsHttpInit: full qualified hostname = vinodh
[Thr 5856] HTTP logging is switch off
[Thr 5856] set HTTP state to LISTEN
[Thr 5856] *** HTTP port 8100 state LISTEN ***
[Thr 5856] *** I listen to internal port 3900 (3900) ***
[Thr 5856] *** HTTP port 8100 state LISTEN ***
[Thr 5856] CUSTOMER KEY: >J1085819952<
[Thr 5856] build version=720.2011.10.26
[Thr 4428] Tue Oct 01 16:27:24 2013
[Thr 4428] MsSExit: received SIGINT (2)
[Thr 4428] set HTTP state to CLOSED
[Thr 4428] *** HTTP port 8100 state CLOSED ***
[Thr 4428] ***LOG Q02=> MsSHalt, MSStop (Msg Server 4936) [msxxserv.c 7598]
this is dev_disp
---------------------------------------------------
trc file: "dev_disp", trc level: 1, release: "720"
---------------------------------------------------
sysno 00
sid NSP
systemid 562 (PC with Windows NT)
relno 7200
patchlevel 0
patchno 201
intno 20020600
make multithreaded, Unicode, 64 bit, optimized
profile \\vinodh\sapmnt\NSP\SYS\profile\NSP_DVEBMGS00_vinodh
pid 8120
kernel runs with dp version 133000(ext=118000) (@(#) DPLIB-INT-VERSION-133000-UC)
length of sys_adm_ext is 588 bytes
*** SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 8120) [dpxxdisp.c 1315]
shared lib "dw_xml.dll" version 201 successfully loaded
shared lib "dw_xtc.dll" version 201 successfully loaded
shared lib "dw_stl.dll" version 201 successfully loaded
shared lib "dw_gui.dll" version 201 successfully loaded
shared lib "dw_mdm.dll" version 201 successfully loaded
shared lib "dw_rndrt.dll" version 201 successfully loaded
shared lib "dw_abp.dll" version 201 successfully loaded
shared lib "dw_sym.dll" version 201 successfully loaded
shared lib "dw_aci.dll" version 201 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
rdisp/dynamic_wp_check : 1
rdisp/calculateLoadAverage : 1
Tue Oct 01 16:21:52 2013
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 6423]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: write dp-profile-values into sys_adm_ext
DpIPCInit2: start server >vinodh_NSP_00 <
DpShMCreate: sizeof(wp_adm) 31696 (2264)
DpShMCreate: sizeof(tm_adm) 5517056 (27448)
DpShMCreate: sizeof(wp_ca_adm) 64000 (64)
DpShMCreate: sizeof(appc_ca_adm) 64000 (64)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/584064/584080
DpShMCreate: sizeof(comm_adm) 584080 (1144)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (296)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (80)
DpShMCreate: sizeof(vmc_adm) 0 (2152)
DpShMCreate: sizeof(wall_adm) (41664/42896/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: sizeof(j2ee_adm) 3952
DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000007930050, size: 6363600)
DpShMCreate: allocated sys_adm at 0000000007930060
DpShMCreate: allocated wp_adm_list at 0000000007933070
DpShMCreate: allocated wp_adm at 0000000007933260
DpShMCreate: allocated tm_adm_list at 000000000793AE40
DpShMCreate: allocated tm_adm at 000000000793AE90
DpShMCreate: allocated wp_ca_adm at 0000000007E7DDA0
DpShMCreate: allocated appc_ca_adm at 0000000007E8D7B0
DpShMCreate: allocated comm_adm at 0000000007E9D1C0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0000000007F2BB60
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated gw_adm at 0000000007F2BC10
DpShMCreate: allocated j2ee_adm at 0000000007F2BC50
DpShMCreate: allocated ca_info at 0000000007F2CBD0
DpShMCreate: allocated wall_adm at 0000000007F2CC60
DpCommAttachTable: attached comm table (header=0000000007E9D1C0/ft=0000000007E9D1D0)
DpSysAdmIntInit: initialize sys_adm
rdisp/test_roll : roll strategy is DP_NORMAL_ROLL
dia token check not active (6 token)
MBUF state OFF
DpCommInitTable: init table for 500 entries
DpRqQInit: keep protect_queue / slots_per_queue 0 / 2001 in sys_adm
rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> EsILock: use spinlock for locking
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 874 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE
MPI: dynamic quotas disabled.
MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 4.0.1 4.0.1 5.1) [dpxxdisp.c 1701]
Tue Oct 01 16:22:11 2013
***LOG Q0K=> DpMsAttach, mscon ( vinodh) [dpxxdisp.c 12467]
MBUF state LOADING
DpStartStopMsg: send start message (myname is >vinodh_NSP_00 <)
DpStartStopMsg: start msg sent
CCMS uses Shared Memory Key 73 for monitoring.
CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.
CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1296]
MBUF state ACTIVE
DpWpBlksLow: max wp blocks in queue is 800 (80 %)
MBUF component UP
DpMsgProcess: 1 server in MBUF
DpAppcBlksLow: max appc blocks in queue is 500 (50 %)
Tue Oct 01 16:25:22 2013
DpSigInt: caught signal 2
DpHalt: shutdown server >vinodh_NSP_00 < (normal)
DpModState: change server state from STARTING to SHUTDOWN
DpHalt: stop work processes
Tue Oct 01 16:26:23 2013
DpHalt: stop gateway
DpHalt: stop icman
DpHalt: terminate gui connections
DpHalt: wait for end of work processes
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:24 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:25 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:26 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:27 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:28 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:29 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:30 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:31 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:32 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:33 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:34 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:35 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:36 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:37 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:38 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:39 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:40 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:41 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:42 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:43 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:44 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:45 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:46 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:47 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:48 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:49 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:50 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:51 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:52 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:53 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:54 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:55 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:56 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:57 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:58 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:59 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:27:00 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:27:01 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:27:02 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:27:03 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:27:04 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:27:05 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:27:06 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:27:07 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:27:08 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:27:09 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:27:10 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:27:11 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:27:12 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:27:13 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:27:14 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:27:15 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:27:16 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:27:17 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:27:18 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:27:19 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:27:20 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:27:21 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:27:22 2013
*** ERROR => DpHalt: W6 (pid 7044) still alive ... [dpxxdisp.c 11098]
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:27:23 2013
DpHalt: wait for end of gateway
*** ERROR => [DpProcDied] Process died (PID:7404 HANDLE:952 rc:0x0) [dpnttool2.c 147]
DpHalt: wait for end of icman
*** ERROR => [DpProcDied] Process died (PID:7284 HANDLE:968 rc:0x0) [dpnttool2.c 147]
DpStartStopMsg: send stop message (myname is >vinodh_NSP_00 <)
DpStartStopMsg: stop msg sent
Tue Oct 01 16:27:24 2013
DpHalt: sync with message server o.k.
DpHalt: detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12858]
MBUF state OFF
MBUF component DOWN
DpHalt: cleanup EM
***LOG Q05=> DpHalt, DPStop ( 8120) [dpxxdisp.c 11380]
I am using windows 7 ultimate, the db i am using is Maxdb
Hi Himanshu
I am pasting dev_w0
---------------------------------------------------
trc file: "dev_w0", trc level: 1, release: "720"
---------------------------------------------------
*
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS all, MJ
*
M sysno 00
M sid NSP
M systemid 562 (PC with Windows NT)
M relno 7200
M patchlevel 0
M patchno 201
M intno 20020600
M make multithreaded, Unicode, 64 bit, optimized
M profile \\vinodh\sapmnt\NSP\SYS\profile\NSP_DVEBMGS00_vinodh
M pid 5752
M
M kernel runs with dp version 133000(ext=118000) (@(#) DPLIB-INT-VERSION-133000-UC)
M length of sys_adm_ext is 588 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 5752) [dpxxdisp.c 1377]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpIPCInit2: read dp-profile-values from sys_adm_ext
M DpShMCreate: sizeof(wp_adm) 31696 (2264)
M DpShMCreate: sizeof(tm_adm) 5517056 (27448)
M DpShMCreate: sizeof(wp_ca_adm) 64000 (64)
M DpShMCreate: sizeof(appc_ca_adm) 64000 (64)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/584064/584080
M DpShMCreate: sizeof(comm_adm) 584080 (1144)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (296)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (80)
M DpShMCreate: sizeof(vmc_adm) 0 (2152)
M DpShMCreate: sizeof(wall_adm) (41664/42896/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: sizeof(j2ee_adm) 3952
M DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000010150050, size: 6363600)
M DpShMCreate: allocated sys_adm at 0000000010150060
M DpShMCreate: allocated wp_adm_list at 0000000010153070
M DpShMCreate: allocated wp_adm at 0000000010153260
M DpShMCreate: allocated tm_adm_list at 000000001015AE40
M DpShMCreate: allocated tm_adm at 000000001015AE90
M DpShMCreate: allocated wp_ca_adm at 000000001069DDA0
M DpShMCreate: allocated appc_ca_adm at 00000000106AD7B0
M DpShMCreate: allocated comm_adm at 00000000106BD1C0
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000001074BB60
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated gw_adm at 000000001074BC10
M DpShMCreate: allocated j2ee_adm at 000000001074BC50
M DpShMCreate: allocated ca_info at 000000001074CBD0
M DpShMCreate: allocated wall_adm at 000000001074CC60
M DpCommAttachTable: attached comm table (header=00000000106BD1C0/ft=00000000106BD1D0)
M DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 from sys_adm
M
M Tue Oct 01 16:21:53 2013
M rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X <ES> EsILock: use spinlock for locking
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
X mm.dump: set maximum dump mem to 96 MB
M DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE
M ThStart: taskhandler started
M ThInit: initializing DIA work process W0
M
M Tue Oct 01 16:21:54 2013
M ThInit: running on host vinodh
M
M Tue Oct 01 16:21:55 2013
M calling db_connect ...
B Loading DB library 'E:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' ...
B Library 'E:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' loaded
B Version of 'E:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' is "720.00", patchlevel (0.201)
C
C DBSDBSLIB : version 720.00, patch 0.201 (Make PL 0.201)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C (0.201) Take care of warnings during database connect (note 1600066)
C (0.117) Define a primary key on the temp tables for R3szchk (note 1606260)
C (0.114) Support of MaxDB 7.8 and 7.9 (note 1653058)
C (0.103) Close all lob locators at end of the transaction (note 1626591)
C (0.101) Fix for unknown table __TABLE_SIZES_ (R3szchk) (note 1619504)
C (0.098) Use filesystem counter for R3szchk (note 1606260)
C (0.092) Secondary connection to HANA (note 1481256)
C (0.089) UPDSTAT with SAPSYSTEMNAME longer as 3 characters (note 1584921)
C (0.081) No UPSERT on WBCROSSGT (note 1521468)
C (0.080) New feature batch streaming (note 1340617)
C
C
C Loading SQLDBC client runtime ...
C SQLDBC Module : E:\sapdb\clients\NSP\pgm\libSQLDBC77.dll
C SQLDBC SDK : SQLDBC.H 7.9.7 BUILD 010-123-243-190
C SQLDBC Runtime : libSQLDBC 7.9.7 BUILD 010-123-243-190
C SQLDBC client runtime is MaxDB 7.9.7.010 CL 243190
C SQLDBC supports new DECIMAL interface : 1
C SQLDBC supports VARIABLE INPUT data : 1
C SQLDBC supports VARIABLE OUTPUT data : 1
C SQLDBC supports Multiple Streams : 1
C SQLDBC supports LOB LOCATOR KEEPALIVE : 1
C SQLDBC supports LOB LOCATOR COPY : 1
C SQLDBC supports BULK SELECT with LOBS : 1
C SQLDBC supports BATCH STREAM : 1
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C Attach to SAP DB : Kernel 7.9.07 Build 010-123-243-190
C Database release is SAP DB 7.9.07.010
C INFO : Database 'NSP' instance is running on 'vinodh'
C DB supports UPSERT SQL syntax : 1
C DB supports new EXPAND syntax : 1
C DB supports LOB locators : 1
C DB uses MVCC support : 0
C DB max. input host variables : 2000
C DB max. statement length : 65535
C UPSERT is disabled for : WBCROSSGT
C INFO : SAP DB Packet_Size = 131072
C INFO : SAP DB Min_Reply_Size = 4096
C INFO : SAP DB Comm_Size = 126976
C INFO : DBSL buffer size = 126976
C INFO : SAP DB MaxLocks = 300000
C INFO : Connect to DB as 'SAPNSP'
C Command info enabled
C Now I'm connected to MaxDB
C 00: vinodh-NSP, since=20131001162155, ABAP= <unknown> (0)
B Connection 0 opened (DBSL handle 0)
C INFO : SAP RELEASE (DB) = 731
M ThInit: db_connect o.k.
M ICT: exclude compression: *.zip,*.rar,*.arj,*.z,*.gz,*.tar,*.lzh,*.cab,*.hqx,*.ace,*.jar,*.ear,*.war,*.css,*.pdf,*.gzip,*.uue,*.bz2,*.iso,*.sda,*.sar,*.gif,*.png,*.swc,*.swf
M
M Tue Oct 01 16:26:23 2013
M DpSigInt: caught signal 2
M in_ThErrHandle: 1
M ThSigHandler: signal (step 1, th_errno 11, action 2, signal no. 2)
M ThIErrHandle: new stat of W0 is WP_SHUTDOWN
M ThIErrHandle: I'm during shutdown
M PfStatDisconnect: disconnect statistics
M ThIErrHandle: action changed to 2
M ThIErrHandle: entering ThSetStatError
M ThShutDownServer: shutdown server
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workp. 0 5752) [dpnttool.c 339]
M SemCleanup: Reset waiting on semaphore (Key:10/Slot:9)
this is dev_ms
---------------------------------------------------
trc file: "dev_ms", trc level: 1, release: "720"
---------------------------------------------------
[Thr 5856] Tue Oct 01 16:21:45 2013
[Thr 5856] ms/http_max_clients = 500 -> 500
[Thr 5856] MsSSetTrcLog: trc logging active, max size = 52428800 bytes
systemid 562 (PC with Windows NT)
relno 7200
patchlevel 0
patchno 101
intno 20020600
make multithreaded, Unicode, 64 bit, optimized
pid 4936
[Thr 5856] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 4936) [msxxserv.c 2278]
[Thr 5856] load acl file = E:\usr\sap\NSP\SYS\global\ms_acl_info.DAT
[Thr 5856] MsGetOwnIpAddr: my host addresses are :
[Thr 5856] 1 : [192.168.122.10] vinodh (HOSTNAME)
[Thr 5856] 2 : [127.0.0.1] vinodh (LOCALHOST)
[Thr 5856] Tue Oct 01 16:21:54 2013
[Thr 5856] 3 : [169.254.86.69] 169.254.86.69 (NILIST)
[Thr 5856] Tue Oct 01 16:22:03 2013
[Thr 5856] 4 : [169.254.68.145] 169.254.68.145 (NILIST)
[Thr 5856] 5 : [192.168.1.107] vinodh (NILIST)
[Thr 5856] Tue Oct 01 16:22:11 2013
[Thr 5856] 6 : [169.254.29.221] 169.254.29.221 (NILIST)
[Thr 5856] MsHttpInit: full qualified hostname = vinodh
[Thr 5856] HTTP logging is switch off
[Thr 5856] set HTTP state to LISTEN
[Thr 5856] *** HTTP port 8100 state LISTEN ***
[Thr 5856] *** I listen to internal port 3900 (3900) ***
[Thr 5856] *** HTTP port 8100 state LISTEN ***
[Thr 5856] CUSTOMER KEY: >J1085819952<
[Thr 5856] build version=720.2011.10.26
[Thr 4428] Tue Oct 01 16:27:24 2013
[Thr 4428] MsSExit: received SIGINT (2)
[Thr 4428] set HTTP state to CLOSED
[Thr 4428] *** HTTP port 8100 state CLOSED ***
[Thr 4428] ***LOG Q02=> MsSHalt, MSStop (Msg Server 4936) [msxxserv.c 7598]
this is dev_disp
---------------------------------------------------
trc file: "dev_disp", trc level: 1, release: "720"
---------------------------------------------------
sysno 00
sid NSP
systemid 562 (PC with Windows NT)
relno 7200
patchlevel 0
patchno 201
intno 20020600
make multithreaded, Unicode, 64 bit, optimized
profile \\vinodh\sapmnt\NSP\SYS\profile\NSP_DVEBMGS00_vinodh
pid 8120
kernel runs with dp version 133000(ext=118000) (@(#) DPLIB-INT-VERSION-133000-UC)
length of sys_adm_ext is 588 bytes
*** SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 8120) [dpxxdisp.c 1315]
shared lib "dw_xml.dll" version 201 successfully loaded
shared lib "dw_xtc.dll" version 201 successfully loaded
shared lib "dw_stl.dll" version 201 successfully loaded
shared lib "dw_gui.dll" version 201 successfully loaded
shared lib "dw_mdm.dll" version 201 successfully loaded
shared lib "dw_rndrt.dll" version 201 successfully loaded
shared lib "dw_abp.dll" version 201 successfully loaded
shared lib "dw_sym.dll" version 201 successfully loaded
shared lib "dw_aci.dll" version 201 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
rdisp/dynamic_wp_check : 1
rdisp/calculateLoadAverage : 1
Tue Oct 01 16:21:52 2013
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 6423]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: write dp-profile-values into sys_adm_ext
DpIPCInit2: start server >vinodh_NSP_00 <
DpShMCreate: sizeof(wp_adm) 31696 (2264)
DpShMCreate: sizeof(tm_adm) 5517056 (27448)
DpShMCreate: sizeof(wp_ca_adm) 64000 (64)
DpShMCreate: sizeof(appc_ca_adm) 64000 (64)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/584064/584080
DpShMCreate: sizeof(comm_adm) 584080 (1144)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (296)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (80)
DpShMCreate: sizeof(vmc_adm) 0 (2152)
DpShMCreate: sizeof(wall_adm) (41664/42896/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: sizeof(j2ee_adm) 3952
DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000007930050, size: 6363600)
DpShMCreate: allocated sys_adm at 0000000007930060
DpShMCreate: allocated wp_adm_list at 0000000007933070
DpShMCreate: allocated wp_adm at 0000000007933260
DpShMCreate: allocated tm_adm_list at 000000000793AE40
DpShMCreate: allocated tm_adm at 000000000793AE90
DpShMCreate: allocated wp_ca_adm at 0000000007E7DDA0
DpShMCreate: allocated appc_ca_adm at 0000000007E8D7B0
DpShMCreate: allocated comm_adm at 0000000007E9D1C0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0000000007F2BB60
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated gw_adm at 0000000007F2BC10
DpShMCreate: allocated j2ee_adm at 0000000007F2BC50
DpShMCreate: allocated ca_info at 0000000007F2CBD0
DpShMCreate: allocated wall_adm at 0000000007F2CC60
DpCommAttachTable: attached comm table (header=0000000007E9D1C0/ft=0000000007E9D1D0)
DpSysAdmIntInit: initialize sys_adm
rdisp/test_roll : roll strategy is DP_NORMAL_ROLL
dia token check not active (6 token)
MBUF state OFF
DpCommInitTable: init table for 500 entries
DpRqQInit: keep protect_queue / slots_per_queue 0 / 2001 in sys_adm
rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> EsILock: use spinlock for locking
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 874 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE
MPI: dynamic quotas disabled.
MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 4.0.1 4.0.1 5.1) [dpxxdisp.c 1701]
Tue Oct 01 16:22:11 2013
***LOG Q0K=> DpMsAttach, mscon ( vinodh) [dpxxdisp.c 12467]
MBUF state LOADING
DpStartStopMsg: send start message (myname is >vinodh_NSP_00 <)
DpStartStopMsg: start msg sent
CCMS uses Shared Memory Key 73 for monitoring.
CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.
CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1296]
MBUF state ACTIVE
DpWpBlksLow: max wp blocks in queue is 800 (80 %)
MBUF component UP
DpMsgProcess: 1 server in MBUF
DpAppcBlksLow: max appc blocks in queue is 500 (50 %)
Tue Oct 01 16:25:22 2013
DpSigInt: caught signal 2
DpHalt: shutdown server >vinodh_NSP_00 < (normal)
DpModState: change server state from STARTING to SHUTDOWN
DpHalt: stop work processes
Tue Oct 01 16:26:23 2013
DpHalt: stop gateway
DpHalt: stop icman
DpHalt: terminate gui connections
DpHalt: wait for end of work processes
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:24 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:25 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:26 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:27 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:28 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:29 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:30 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:31 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:32 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:33 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:34 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:35 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:36 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:37 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:38 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:39 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:40 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:41 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:42 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:43 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:44 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:45 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:46 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:47 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:48 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:49 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:50 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:51 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:52 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:53 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:54 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:55 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:56 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:57 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:58 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:26:59 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:27:00 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:27:01 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:27:02 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:27:03 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:27:04 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:27:05 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:27:06 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:27:07 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:27:08 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:27:09 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:27:10 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:27:11 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:27:12 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:27:13 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:27:14 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:27:15 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:27:16 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:27:17 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:27:18 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:27:19 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:27:20 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:27:21 2013
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:27:22 2013
*** ERROR => DpHalt: W6 (pid 7044) still alive ... [dpxxdisp.c 11098]
DpHalt: waiting for termination of work processes ...
Tue Oct 01 16:27:23 2013
DpHalt: wait for end of gateway
*** ERROR => [DpProcDied] Process died (PID:7404 HANDLE:952 rc:0x0) [dpnttool2.c 147]
DpHalt: wait for end of icman
*** ERROR => [DpProcDied] Process died (PID:7284 HANDLE:968 rc:0x0) [dpnttool2.c 147]
DpStartStopMsg: send stop message (myname is >vinodh_NSP_00 <)
DpStartStopMsg: stop msg sent
Tue Oct 01 16:27:24 2013
DpHalt: sync with message server o.k.
DpHalt: detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12858]
MBUF state OFF
MBUF component DOWN
DpHalt: cleanup EM
***LOG Q05=> DpHalt, DPStop ( 8120) [dpxxdisp.c 11380]
I am using windows 7 ultimate, the db i am using is Maxdb
User | Count |
---|---|
81 | |
9 | |
9 | |
7 | |
7 | |
6 | |
6 | |
6 | |
5 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.