XPRA_EXECUTION Error Post-Import Methods - job RDDEXECL fails

[former_member229542]

Hi guys

While perfoming XPRA_EXECUTION of package SAPK-20004INIWBEP it always fails with Return Code 12.

trans log shows /IWBEP/ES_DESTIN_FINDER" was already performed successfully earlier but still fails

I have updated tp and r3trans to latest for 7.21 Kernel, also restarted system but no luck

System is a ERP 6 EHP6 SPS3, SQL Server 2012

Any idea to overcome this issue?

SAPK-20004INIWBEP fails stating job RDDEXECL cancels

2 EPU126XPost-import methods for change/transport request: "SAPK-20004INIWBEP"

4 EPU111    on the application server: "STKBAECCAIO"

2 EPU122XPost-import method "ENHS_AFTER_IMPORT" started for "ENHS" "L", date and time: "20130926142554"

A2 ESEEF_BASE 804 Beginning of after-import for enh. object of type "ENHS BADI_DEF (BC-DWB-CEX)" at "14:25:54"

A3 ESEEF_BASE 805 Start of after-import of enh. obj. "ENHS /IWBEP/ES_DESTIN_FINDER" at "14:25:54"

A4 ESEEF_BASE 513 Enhancement object "ENHS /IWBEP/ES_DESTIN_FINDER" already generated

A3 ESEEF_BASE 811 End of after-import of enh. object "ENHS /IWBEP/ES_DESTIN_FINDER" at "14:25:54"

A3 ESEEF_BASE 805 Start of after-import of enh. obj. "ENHS /IWBEP/ES_MGW_ROLE_MAP_PROV" at "14:25:54"

A4 ESEEF_BASE 513 Enhancement object "ENHS /IWBEP/ES_MGW_ROLE_MAP_PROV" already generated

A3 ESEEF_BASE 811 End of after-import of enh. object "ENHS /IWBEP/ES_MGW_ROLE_MAP_PROV" at "14:25:54"

A3 ESEEF_BASE 805 Start of after-import of enh. obj. "ENHS /IWBEP/ES_MGW_SRV_RUNTIME" at "14:25:54"

A4 ESEEF_BASE 513 Enhancement object "ENHS /IWBEP/ES_MGW_SRV_RUNTIME" already generated

A3 ESEEF_BASE 811 End of after-import of enh. object "ENHS /IWBEP/ES_MGW_SRV_RUNTIME" at "14:25:54"

A2 ESEEF_BASE 812 End of after-import of "3" enh. object of type "ENHS BADI_DEF (BC-DWB-CEX)" at "14:25:54" (duration "0" sec.)

3 EPU123 Post-import method "ENHS_AFTER_IMPORT" completed for "ENHS" "L", date and time: "20130926142554"

2 EPU122XPost-import method "ENHO_AFTER_IMPORT" started for "ENHO" "L", date and time: "20130926142554"

1AETR012XProgram terminated (job: "RDDEXECL", no.: "14233100")

1AEPU320 See job log"RDDEXECL""14233100""AIO"

1 ETP162 EXECUTION OF REPORTS AFTER PUT

1 ETP110 end date and time   : "20130926142640"

1 ETP111 exit code           : "12"

1 ETP199 ######################################

1 ETP199X######################################

1 ETP162 EXECUTION OF REPORTS AFTER PUT

1 ETP101 transport order     : "SAPK-20004INIWBEP"

1 ETP102 system              : "AIO"

1 ETP108 tp path             : "tp"

1 ETP109 version and release : "380.05.13" "721"

SAPK-20003INIWBEP performs the same activation, with no failure

2 EPU126XPost-import methods for change/transport request: "SAPK-20003INIWBEP"

4 EPU111    on the application server:

2 EPU122XPost-import method "ENHS_AFTER_IMPORT" started for "ENHS" "L", date and time: "20130926142405"

A2 ESEEF_BASE 804 Beginning of after-import for enh. object of type "ENHS BADI_DEF (BC-DWB-CEX)" at "14:24:05"

A3 ESEEF_BASE 805 Start of after-import of enh. obj. "ENHS /IWBEP/ES_MGW_EDP" at "14:24:05"

A4 ESEEF_BASE 513 Enhancement object "ENHS /IWBEP/ES_MGW_EDP" already generated

A3 ESEEF_BASE 811 End of after-import of enh. object "ENHS /IWBEP/ES_MGW_EDP" at "14:24:05"

A3 ESEEF_BASE 805 Start of after-import of enh. obj. "ENHS /IWBEP/ES_MGW_SRV_RUNTIME" at "14:24:05"

A4 ESEEF_BASE 513 Enhancement object "ENHS /IWBEP/ES_MGW_SRV_RUNTIME" already generated

A3 ESEEF_BASE 811 End of after-import of enh. object "ENHS /IWBEP/ES_MGW_SRV_RUNTIME" at "14:24:05"

A2 ESEEF_BASE 812 End of after-import of "2" enh. object of type "ENHS BADI_DEF (BC-DWB-CEX)" at "14:24:05" (duration "0" sec.)

3 EPU123 Post-import method "ENHS_AFTER_IMPORT" completed for "ENHS" "L", date and time: "20130926142405"

2 EPU122XPost-import method "ENHO_AFTER_IMPORT" started for "ENHO" "L", date and time: "20130926142405"

A2 ESEEF_BASE 804 Beginning of after-import for enh. object of type "ENHO BADI_IMPL (BC-DWB-CEX)" at "14:24:05"

A3 ESEEF_BASE 805 Start of after-import of enh. obj. "ENHO /IWBEP/EI_MGW_MED_TEXT_LOAD" at "14:24:05"

A4 ESEEF_BASE 513 Enhancement object "ENHO /IWBEP/EI_MGW_MED_TEXT_LOAD" already generated

A3 ESEEF_BASE 811 End of after-import of enh. object "ENHO /IWBEP/EI_MGW_MED_TEXT_LOAD" at "14:24:05"

A2 ESEEF_BASE 812 End of after-import of "1" enh. object of type "ENHO BADI_IMPL (BC-DWB-CEX)" at "14:24:05" (durati

3 EPU123 Post-import method "ENHO_AFTER_IMPORT" completed for "ENHO" "L", date and time: "20130926142405"

2 EPU122XPost-import method "O2_XSLT_AFTER_IMPORT" started for "XSLT" "L", date and time: "20130926142405"

3 EPU123 Post-import method "O2_XSLT_AFTER_IMPORT" completed for "XSLT" "L", date and time: "20130926142405"

2 EPU122XPost-import method "CLS_AFTER_IMP_AVAS" started for "AVAS" "L", date and time: "20130926142405"

3 EPU123 Post-import method "CLS_AFTER_IMP_AVAS" completed for "AVAS" "L", date and time: "20130926142405"

2 EPU122XPost-import method "PRGN_AFTER_IMP_SUSO_SAP_ALL" started for "SUSO" "L", date and time: "20130926142405"

3 EPU123 Post-import method "PRGN_AFTER_IMP_SUSO_SAP_ALL" completed for "SUSO" "L", date and time: "20130926142407"

2 EPU122XPost-import method "SKWF_TP_NMSPC_CHECK_AFTER_IMP" started for "SMIM" "L", date and time: "20130926142407"

3 EPU123 Post-import method "SKWF_TP_NMSPC_CHECK_AFTER_IMP" completed for "SMIM" "L", date and time: "20130926142407"

2 EPU122XPost-import method "STREE_AFTER_IMPORT" started for "SHI3" "L", date and time: "20130926142407"

3 EPU123 Post-import method "STREE_AFTER_IMPORT" completed for "SHI3" "L", date and time: "20130926142407"

2 EPU127 Post-import methods of change/transport request "SAPK-20003INIWBEP" completed

2 EPU128      Start of subsequent processing ... "20130926142405"

2 EPU129      End of subsequent processing... "20130926142407"

2 EPU110XExecute reports for change/transport request: "SAPK-20003INIWBEP"

4 EPU111    on the application server: "STKBAECCAIO"

3 ETP000

3 ETP000 **************************************************

3 ETP000

2 EPU117 Reports for change/transport request "SAPK-20003INIWBEP" have been executed

2 EPU118      Start of................ "20130926142407"

2 EPU119      End of.................. "20130926142407"

1 ETP162 EXECUTION OF REPORTS AFTER PUT

1 ETP110 end date and time   : "20130926142407"

1 ETP111 exit code           : "0"

1 ETP199 ######################################

job log shows the following

Thanks!

[Former Member · Accepted solution]

Issue is with Syntax of code, Check with ABAPer to remove Inconsistency of Object.

[former_member229542 · Accepted solution]

Issue arised due a  previous EHP Upgrade, these two applied notes, were causing the syntax error

0001420290

0001558728

If you bump into this issue, ask for a ABAP Developer to fix the syntax error

[Reagan]

Could you check this SAP note

Note 1860742 - Implementation of UI2_700: Dump DYN_CALL_METH_NOT_FOUND

Regards

RB

[former_member229542]

Thanks RB for that not, but in this case, error is for component IW_BEP 200: SP 0004 (SAPK-20004INIWBEP)

Also Dump Message are different

What im seeing on SE80, is that strange error with this method, it does not contain any line.

It seems to be enhanced, and the job complains for this.

is it any way to de-enhance this?

[Reagan]

If I were you I would immediately raise an OSS message to SAP Support with all the details and actions taken from my end and assign the OSS message to the queue BC-UPG-OCS-SPA

You may please consider that.

Regards

RB

[former_member229542]

Thanks RB

I just restored DB and going to try with a lower SP level for that component

Thanks for your help

[Former Member]

Hi,

If you get the error again. Please use the below report to investigate more.

1664235 - Investigating errors in XPRAS phase

Note 122597 - Ignoring errors in the phase XPRAS_...

Please also check the below note if you are affected with the below support pack. Its little old.

Note 1272876 - ENHD/ENHS deleted in upgrade or Enhancement Package import

Thanks

Rishi Abrol

[former_member229542]

Thanks Rishi for that valuable notes

Indeed, as i mentioned on the thread RDDEXECL job fails due a syntax error on a Class/Interfase.

Note 122597 has valuable information how to ignore the reports, anyways an ABAP consultant is investingating syntax error mentioned on job lob.

Thanks!

[Reagan]

Hello

What exactly are you performing ?

Are you doing an EHP update, release upgrade or SP update ?

If you are doing an upgrade then there will be additional logs in the <SUM_upgrade_directory>/abap/log directory. You may need to check them or provide them.

1AEPU320 See job log"RDDEXECL""14233100""AIO"

How about this job log ?

Regards

RB

[former_member229542]

Hi RB

Just installing UI 1.0 Addon via SAINT

Saludos!

[ashish_vikas]

Please check workprocess trace file workprocess running for job RDDEXECL. we have fixed a somewhat similar issue by increasing heap size.

If you have any error related to this, please try this.

best regards

ashish

[Reagan]

What does the job log say ?

Regards

RB

[former_member229542]

Job log just states a SYNTAX_ERROR which is dump posted above

[former_member229542]

Hi Ashish, no much information on the wp developer trace, it mentions again a SYNTAX ERROR on program CL_ENH_TOOL_FUGR==============CP

Thanks!

A  ABAP Program CL_R3STANDARD_PERSISTENCE=====CP	.
A  Source CL_R3STANDARD_PERSISTENCE=====CM02S	Line 44.

A  Error Code SYNTAX_ERROR.

A  Module  $Id: //bas/721_REL/src/krn/runt/abgen.c#4 $ SAP.

A  Function ab_genprog Line 1850.

A  ** RABAX: level LEV_RX_STDERR completed.

A  ** RABAX: level LEV_RX_RFC_ERROR entered.

A  ** RABAX: level LEV_RX_RFC_ERROR completed.

A  ** RABAX: level LEV_RX_RFC_CLOSE entered.

A  ** RABAX: level LEV_RX_RFC_CLOSE completed.

A  ** RABAX: level LEV_RX_IMC_ERROR entered.

A  ** RABAX: level LEV_RX_IMC_ERROR completed.

A  ** RABAX: level LEV_RX_DATASET_CLOSE entered.

A  ** RABAX: level LEV_RX_DATASET_CLOSE completed.

A  ** RABAX: level LEV_RX_ERROR_SAVE entered.

A  ** RABAX: level LEV_RX_ERROR_SAVE completed.

A  ** RABAX: level LEV_RX_ERROR_TPDA entered.

A  ** RABAX: level LEV_RX_ERROR_TPDA completed.

A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.

A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.

A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.

A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.

A  ** RABAX: level LEV_RX_END entered.

A  ** RABAX: level LEV_RX_END completed.

A  ** RABAX: end no http/smtp

A  ** RABAX: end RX_BTCHLOG|RX_VBLOG

A  Syntax error in program CL_ENH_TOOL_FUGR==============CP

[Reagan]

Check Tx ST22 for the runtime error

Regards

RB

[former_member229542]

I thought i have pasted ST22 screenshot, here it comes.

its on program CL_ENH_TOOL_FUGR==============CP

method IF_ENH_OBJECT~AFTER_IMPORT

[former_member229542]

in ABAP Workbench, when performing a Systax Check i ran into this

[Sriram2009]

Hi Martin

Kindly update the latest DBSL patch from Service market place on MS SQL DB and than retry you upgrade

Thanks

Sriram

[former_member229542]

Hi Siriam,

dbsl patch was updated but still failing on XPRA_EXECUTION step

Regards!

[Sriram2009]

Hi

Thanks for your information

is this any dump during the time of Job failed?

Thanks

Sriram