on 09-24-2013 3:57 PM
Hi Experts,
we have follwing problem with sap content server:
We have a persist problem with on of the steps of the checkreport: RSCMSTH0 Step 27, APPD1 "append missing comp"
env of sap erp & cs:
SAP ContentServer based on Windows 2008/R2 and MaxDB 7.8
CS Server the latest contservw_17 Patchset and also the latest MaxDB 7.8 Patchset
non-unicode ERP System we also applied the latest SAP Kernel (7.21_EXT, PL135)
saphttp -V
as we run testreport RSCMSTH0 in se38, we raised a timeout, after we increased the icm/server_port_n ....timeout=240 proctime=900
and ms/server_port_0 TIMEOUT=240,PROCTIMEOUT=900 it work´s now.
But we have a problem with on of the steps of the checkreport: RSCMSTH0 Step 27, APPD1 "append missing comp"
detail log:
br
julius
Hi Juluis,
This problem is related to SAP note 1907526.
SAP has just released a new version of Content Server DLLs. (contservw_18-20008028.zip)
Those DLLs should resolve the problem.
I'm going to test and keep you informed.
Best regards,
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Julius,
Please close this thread.
Thanks
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
hi all,
no sorry, i ditn´t find a solution until yet, i have opened a message to SAP Support and i`am waiting for any helpfull answer!
br
julius
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
HI ,
Take technical consultant help and check for
1) Http://<; IP>:1090 it has to be display Contentserver dll
2) http:\\<IP>:1090\ContentServer enter (display same as above)
3) http:\\<IP>:1090\ContentServer\ContentServer.dll?serverInfo
Just copy above URL with your hostname or IP. Check HTTP script on OAC0.
If still getting issue Put 1090 port as open
Please update me .
Regards,
chandu.
Hi Chandu,
thx for the response,
i tested and checked the URL you mentioned.
1) Http://<; IP>:1090 it has to be display Contentserver dll
@
but:
3) http:\\<IP>:1090\ContentServer\ContentServer.dll?serverInfo
@ work's fine:
after that, i enabled Directory browsing in ISS - Manager for binding Port 1090, and i can browse the Port 1090.
But the error still persist:
Binding Info
br
Julius
Hi Julius,
There is security Problem. provide all permission to the users and content server file. Restart the services from IIS
Check under IIS system services all are running are not .
Check Live cache drivers existed under DATA Resources drivers tab.
Inside of IIS services manager , select local host and check for directory browser should be enable. do it for default, content server.
Regards,
chandu.
Hi Chandy,
thx for help!
with enable Directory Browsing, after this the Port ist open, i get the same error in the http cms testreport!
all Services in ISS are running.
also granted the permission, that changed nothing.
Bind Port 1090 open:
Error, very Long runtime and :
HTTP/1.1 404 (Not Found)
good APPD 1 append missing comp 900688.156 27
br julius
Hi,
Please check below link and download PDF
Check each and everything from 21st page to 26th page.
Run those commands and carefully observe result. As my guess you dont have SQLOD32.DLL , SQLODEXT.DLL . if so Copy ODBCAD32 file from C:\Windows\SysWOW64 to < X: > sapdb\programs\pgm.
Restart the total system and run again those 3 commands carefully. All result should be ok.
Regards,
chandu.
Hi Julius.
I had a feedback from SAP support.
There is an issue with ContentStorage.Dll :
I think i could find the root cause of the issue. This was due to a
new security which was not enabled and yet the code was expecting
by default the security option to be on.
The official patch will be available in SMP in another 2 weeks of time.
Best Regards,
hi,
i opened a, customer message and wait for feedback from sap support.
As i get further information, i will post the answer & solution for the problem.
info from oss-message ( zitat aus text - sap support 😞
The DBAnalyzer entries shows always the same picture that one user task
in this case the task 466 is waiting for another task 465 which should
release the lock of one table row:
* W3 Task 466 (appl. 4752) is waiting for lock 'row_exclusive' on table
DOCUMENTS0001 since 726s, locked 'row_exclusive' from task 465 (appl.
4752, state Command wait)
But the second task 465 is in the state "command wait". It is possible
that the task is waiting for commit. To be sure I have to check all
counter for this task during the report running time whether it is
really only waiting the whole time.
br
julius
Hello,
You can try to use the ODBC driver 7.6 and test again.
The combination of ODBC 7.6 and MaxDB 7.7/7.8 is recommended and is supported for a long time. No need to worry.
You can refer the SAP note 698915 to get details about the ODBC Driver 7.6.
Also check the 'No signature' checkbox in Transaction OAC0.
Regards,
David
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi,
I have opened a message to SAP support.
Still waiting a response.
The goal of this new installation is to have a Content Server with the most recent programs (Content Server DLLs, MAXDB).
It's a very strange behaviour if we have to downgrade ODBC driver to version 7.6.
With contservw_12 Patchset, I haven't this problem.
User | Count |
---|---|
94 | |
11 | |
11 | |
6 | |
6 | |
4 | |
4 | |
3 | |
3 | |
3 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.