cancel
Showing results for 
Search instead for 
Did you mean: 

Disp+work.exe stopped working

Former Member
0 Kudos

Hi all,

I tried to put SSL to my system SR2 but after restarting the server, my disp+work.exe stopped working. I need some advise about this matter.

Thanks! BTW Below are the log files.

dev_ms

trc file: "dev_ms", trc level: 1, release: "701"

[Thr 3220] Thu Sep 19 08:44:09 2013
[Thr 3220] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid   562 (PC with Windows NT)
relno      7010
patchlevel 0
patchno    48
intno      20020600
make:      multithreaded, Unicode, 64 bit, optimized
pid        3632

[Thr 3220] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 3632) [msxxserv.c   1853]

[Thr 3220] Thu Sep 19 08:44:10 2013
[Thr 3220] load acl file = \\MDCSAP05\sapmnt\SR2\SYS\global\ms_acl_info.DAT
[Thr 3220] MsGetOwnIpAddr: my host addresses are :
[Thr 3220]   1 : [10.206.110.70] mdcsap05.maniladc.com (HOSTNAME)
[Thr 3220]   2 : [127.0.0.1] MDCSAP05 (LOCALHOST)
[Thr 3220] MsHttpInit: full qualified hostname = MDCSAP05
[Thr 3220] HTTP logging is switch off
[Thr 3220] set HTTP state to LISTEN
[Thr 3220] ms/icf_info_server : deleted
[Thr 3220] *** I listen to port sapmsSR2 (3602) ***
[Thr 3220] *** I listen to internal port 3902 (3902) ***
[Thr 3220] *** HTTP port 8102 state LISTEN ***
[Thr 3220] CUSTOMER KEY: >E0550150319<
[Thr 3220] build version=701.2009.03.11

[Thr 3220] Thu Sep 19 08:55:02 2013
[Thr 3220] *** ERROR => MsSCheckConnections: no response from client C0 (10.206.110.70) after 300 secs received [msxxserv.c   3206]
[Thr 3220] *** ERROR => MsSCheckConnections: disconnect now [10.206.110.70] [msxxserv.c   3210]

dev_w0

trc file: "dev_w0", trc level: 1, release: "701"

*

*  ACTIVE TRACE LEVEL           1

*  ACTIVE TRACE COMPONENTS      all, MJ

*

B Tue Sep 03 12:55:39 2013

B  create_con (con_name=R/3)

B  Loading DB library 'C:\usr\sap\SR2\DVEBMGS02\exe\dboraslib.dll' ...

B  Library 'C:\usr\sap\SR2\DVEBMGS02\exe\dboraslib.dll' loaded

B  Version of 'C:\usr\sap\SR2\DVEBMGS02\exe\dboraslib.dll' is "700.08", patchlevel (0.42)

B  New connection 0 created

M sysno      02

M sid        SR2

M systemid   562 (PC with Windows NT)

M relno      7010

M patchlevel 0

M patchno    55

M intno      20020600

M make:      multithreaded, Unicode, 64 bit, optimized

M pid        3848

M

M  kernel runs with dp version 242000(ext=110000) (@(#) DPLIB-INT-VERSION-242000-UC)

M  length of sys_adm_ext is 576 bytes

M  ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3848) [dpxxdisp.c   1349]

I  MtxInit: 30000 0 0

M  DpSysAdmExtCreate: ABAP is active

M  DpSysAdmExtCreate: VMC (JAVA VM in WP) is active

M  DpShMCreate: sizeof(wp_adm)  84096 (1752)

M  DpShMCreate: sizeof(tm_adm)  5912704 (29416)

M  DpShMCreate: sizeof(wp_ca_adm)  24064 (80)

M  DpShMCreate: sizeof(appc_ca_adm) 8000 (80)

M  DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080

M  DpShMCreate: sizeof(comm_adm)  552080 (1088)

M  DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=512/48/65600/90416/156064

M  DpShMCreate: sizeof(slock_adm)  156064 (104)

M  DpFileTableSize: max/headSize/ftSize/tableSize=9200/16/883264/883280

M  DpShMCreate: sizeof(file_adm)  883280 (72)

M  DpShMCreate: sizeof(vmc_adm)  85744 (1864)

M  DpShMCreate: sizeof(wall_adm)  (41664/36752/64/192)

M  DpShMCreate: sizeof(gw_adm) 48

M  DpShMCreate: SHM_DP_ADM_KEY  (addr: 0000000009190050, size: 7793536)

M  DpShMCreate: allocated sys_adm at 0000000009190050

M  DpShMCreate: allocated wp_adm at 0000000009192270

M  DpShMCreate: allocated tm_adm_list at 00000000091A6AF0

M  DpShMCreate: allocated tm_adm at 00000000091A6B50

M  DpShMCreate: allocated wp_ca_adm at 000000000974A3D0

M  DpShMCreate: allocated appc_ca_adm at 00000000097501D0

M  DpShMCreate: allocated comm_adm at 0000000009752110

M  DpShMCreate: allocated slock_adm at 00000000097D8DA0

M  DpShMCreate: allocated file_adm at 00000000097FEF40

M  DpShMCreate: allocated vmc_adm_list at 00000000098D6990

M  DpShMCreate: allocated gw_adm at 00000000098D6A10

M  DpShMCreate: allocated vmc_adm at 00000000098D6A40

M  DpShMCreate: allocated ca_info at 00000000098EB930

M  DpShMCreate: allocated wall_adm at 00000000098EB940

M  DpSesCreateTable: attached session table at 000000000A600050 (len=145632)

M  rdisp/queue_size_check_value :  -> off

M  ThTaskStatus: rdisp/reset_online_during_debug 0

X  EmInit: MmSetImplementation( 2 ).

X  MM global diagnostic options set: 0

X  <ES> client 0 initializing ....

X  Using implementation view

X  <EsNT> Using memory model view.

M  <EsNT> Memory Reset disabled as NT default

X  ES initialized.

X  mm.dump: set maximum dump mem to 96 MB

M  DpVmcInit2: o.k.

M Tue Sep 03 12:55:41 2013

M  ThInit: running on host MDCSAP05

M Tue Sep 03 12:55:42 2013

M  calling db_connect ...

C  Prepending C:\usr\sap\SR2\DVEBMGS02\exe to Path.

C Tue Sep 03 12:55:47 2013

C  Oracle Client Version: '11.2.0.2.0'

C  application info callback registered

C Tue Sep 03 12:55:59 2013

C  Client NLS setting (OCINlsGetInfo): connection handle 0 -> 'AMERICAN_AMERICA.UTF8'

C  Logon as OPS$-user to get SAPSR2's password

C  Connecting as /@SR2 on connection 0 (nls_hdl 0) ... (dbsl 701 220409)

C  Nls CharacterSet                 NationalCharSet                   EnvHp      ErrHp ErrHpBatch

C    0 UTF8                                                      000000000B057CD0 0000000002DC6D28 0000000002DC7E18

C  Attaching to DB Server SR2 (con_hdl=0,svchp=0000000002DC7CC8,srvhp=000000000B086D30)

C  Starting user session: OCISessionBegin(con_hdl=0, usr='/',svchp=0000000002DC7CC8, srvhp=000000000B086D30, usrhp=0000000002DE0C20)

C     CbApplInfoGet() failed (ignored 1).

C  Now '/@SR2' is connected: con_hdl=0, nls_hdl=0, session_id=102.

C  Got SAPSR2's password from OPS$-user

C  Disconnecting from connection 0 ...

C  Closing user session (con_hdl=0,svchp=0000000002DC7CC8,usrhp=0000000002DE0C20)

C  Now I'm disconnected from ORACLE

C  Connecting as SAPSR2/<pwd>@SR2 on connection 0 (nls_hdl 0) ... (dbsl 701 220409)

C  Nls CharacterSet                 NationalCharSet                   EnvHp      ErrHp ErrHpBatch

C    0 UTF8                                                      000000000B057CD0 0000000002DC6D28 0000000002DC7E18

C  Starting user session: OCISessionBegin(con_hdl=0, usr=SAPSR2/<pwd>, svchp=0000000002DC7CC8, srvhp=000000000B086D30, usrhp=0000000002DE0C20)

C  Now 'SAPSR2/<pwd>@SR2' is connected: con_hdl=0, nls_hdl=0, session_id=102.

C  Database NLS settings: AMERICAN_AMERICA.UTF8

C  DB instance SR2 is running on MDCSAP05 with ORACLE version 11.2.0.2.0 since SEP 03, 2013, 12:49:43

B  Connection 0 opened (DBSL handle 0)

B  Wp  Hdl ConName                        ConId     ConState     TX  HC  PRM RCT FRC TIM MAX OPT Date     Time   DBHost                       

B  000 000 R/3                            000000000 ACTIVE       NO  NO  YES NO  NO  000 255 255 20130903 125542 MDCSAP05                     

C  build_stmt: reallocating stmt buffer: 256 -> 2000 characters

M  db_connect o.k.

M  ICT: exclude compression: *.zip,*.cs,*.rar,*.arj,*.z,*.gz,*.tar,*.lzh,*.cab,*.hqx,*.ace,*.jar,*.ear,*.war,*.css,*.pdf,*.js,*.gzip,*.uue,*.bz2,*.iso,*.sda,*.sar,*.gif,*.png,*.swc,*.swf

M  vmcj/sgc_options: switch off delayed session cleanup during shared gc

M  vmcj/sgc_options: switch off template cleanup before cloning

J  extMemCheck is set to disp+work.ThVmcMemCheck(thxxvmemu.c:3449)

J  extGcMemReserve is set to disp+work.ThVmcGcMemReserve(thxxvmemu.c:3280)

J  extGcMemCommit is set to disp+work.ThVmcGcMemCommit(thxxvmemu.c:3317)

J  extGcMemFree is set to disp+work.ThVmcGcMemFree(thxxvmemu.c:3336)

J  extCreateSharedCodeCache is set to disp+work.ThVmcSharedCodeCacheCreate(thxxvmemu.c:2549)

J  extSetSharedCodeCachePerm is set to disp+work.ThVmcSharedCodeCacheSetPerm(thxxvmemu.c:2627)

J  extMalloc is set to disp+work.ThVmcMallocDispatcher(thxxvmemu.c:2757)

J  extCalloc is set to disp+work.ThVmcCallocDispatcher(thxxvmemu.c:2785)

J  extRealloc is set to disp+work.ThVmcReallocDispatcher(thxxvmemu.c:2815)

J  extFree is set to disp+work.ThVmcFreeDispatcher(thxxvmemu.c:2841)

J  extAddResourceToHeap is set to disp+work.ThVmcAddResourceToHeap(thxxvmemu.c:3355)

J  extRemoveResourceFromHeap is set to disp+work.ThVmcRemoveResourceFromHeap(thxxvmemu.c:3381)

J  extGetLocalMemory is set to disp+work.ThJGetLocalMemory(thxxvmemu.c:3526)

J  extGetLocalMemoryPeak is set to disp+work.ThJGetLocalMemoryPeak(thxxvmemu.c:3538)

J  extGetLocalAllocatedMemory is set to disp+work.ThJGetLocalAllocatedMemory(thxxvmemu.c:3550)

J  extGetGlobalMemory is set to disp+work.ThJGetGlobalMemory(thxxvmemu.c:3595)

J  extGetGlobalMemoryPeak is set to disp+work.ThJGetGlobalMemoryPeak(thxxvmemu.c:3607)

J  extGetGlobalAllocatedMemory is set to disp+work.ThJGetGlobalAllocatedMemory(thxxvmemu.c:3619)

J  extGetUsedBytes is set to disp+work.ThVmcGetUsedBytes(thxxvmemu.c:3403)

J  extGetGuardInfo is set to disp+work.ThVmcGetGuardInfo(thxxvmemu.c:1977)

J  extWriteMemoryDump is set to disp+work.ThJWriteMemoryDump(thxxvmemu.c:2009)

J  extGetPid is set to disp+work.ThJGetPid(thxxjava.c:9089)

J  extRegPtr is set to disp+work.ThJRegPtr(thxxvmemu.c:1745)

J  extGetPtr is set to disp+work.ThJGetPtr(thxxvmemu.c:1757)

J  extDeregPtr is set to disp+work.ThJDeregPtr(thxxvmemu.c:1769)

J  extAbort is set to disp+work.ThVmcJAbortHandler(thxxjava.c:7020)

J  extExit is set to disp+work.ThVmcJExitHandler(thxxjava.c:6908)

J  extSaveExit is set to disp+work.ThVmcJExitHandler(thxxjava.c:6908)

J  extSaveErrTxt is set to disp+work.ThVmcJSetVmErrTxt(thxxjava.c:6990)

J  extSemLock is set to disp+work.ThJSemLock(thxxvmemu.c:577)

J  extSemUnlock is set to disp+work.ThJSemUnlock(thxxvmemu.c:583)

J  extMtxOpen is set to disp+work.ThJMtxOpen(thxxvmemu.c:689)

J  extMtxClose is set to disp+work.ThJMtxClose(thxxvmemu.c:742)

J  extMtxLock is set to disp+work.ThJMtxLock(thxxvmemu.c:780)

J  extMtxTrylock is set to disp+work.ThJMtxTrylock(thxxvmemu.c:940)

J  extMtxUnlock is set to disp+work.ThJMtxUnlock(thxxvmemu.c:1036)

J  extMtxRwLock is set to disp+work.ThJMtxRwLock(thxxvmemu.c:1110)

J  extMtxRwUnlock is set to disp+work.ThJMtxRwUnlock(thxxvmemu.c:1270)

J  extMtxLockCount is set to disp+work.ThJMtxLockCount(thxxvmemu.c:1442)

J  extMtxLocked is set to disp+work.ThJMtxLocked(thxxvmemu.c:1448)

J  extMtxLocking is set to disp+work.ThJMtxLocking(thxxvmemu.c:1491)

J  extMtxWaitingVms is set to disp+work.ThJMtxWaitingVms(thxxvmemu.c:1561)

J  extMtxIAmOwner is set to disp+work.ThJMtxIAmOwner(thxxvmemu.c:1627)

J  extMtxGetInlineLockLoops is set to disp+work.ThVmcMtxGetInlineLockLoops(thxxvmc.c:7820)

J  extMtxGetRollOutLockLoops is set to disp+work.ThVmcMtxGetRollOutLockLoops(thxxvmc.c:7826)

J  extDumpAllMtx is set to disp+work.ThJPrintAllLocks(thxxjava.c:4109)

J  extOpen is set to disp+work.ThIoJavaOpen(thxxfile.c:381)

J  extReopen is set to disp+work.ThIoJavaReopen(thxxfile.c:535)

J  extClose is set to disp+work.ThIoJavaClose(thxxfile.c:665)

J  extSeek is set to disp+work.ThIoJavaSeek(thxxfile.c:750)

J  extSetLength is set to disp+work.ThIoJavaSetLength(thxxfile.c:882)

J  extSync is set to disp+work.ThIoJavaSync(thxxfile.c:910)

J  extIoAvailable is set to disp+work.ThIoJavaAvailable(thxxfile.c:937)

J  extFileSizeFd is set to disp+work.ThIoJavaFileSizeFD(thxxfile.c:965)

J  extPread is set to disp+work.ThIoJavaPRead(thxxfile.c:1074)

J  extPwrite is set to disp+work.ThIoJavaPWrite(thxxfile.c:1111)

J  extReadv is set to disp+work.ThIoJavaReadV(thxxfile.c:994)

J  extWritev is set to disp+work.ThIoJavaWriteV(thxxfile.c:1038)

J  extFDataSync is set to disp+work.ThIoJavaDataSync(thxxfile.c:1145)

J  extFixVmToProcess is set to disp+work.ThIoFixVmToWp(thxxfile.c:1230)

J  extReleaseVmFromProcess is set to disp+work.ThIoRelVmFromWp(thxxfile.c:1239)

J  extGetOSDescriptor is set to disp+work.ThIoJavaGetOsFd(thxxfile.c:1249)

J  extDetachIo is set to disp+work.ThIoJavaDetach(thxxfile.c:1273)

J  extSocket is set to disp+work.ThSoSocketVmc(thxxsock.c:806)

J  extRecvMsg is set to disp+work.ThSoRecvmsg(thxxsock.c:1172)

J  extSendMsg is set to disp+work.ThSoSendmsg(thxxsock.c:1600)

J  extCloseSocket is set to disp+work.ThSoCloseSocket(thxxsock.c:999)

J  extConnect is set to disp+work.ThSoConnect(thxxsock.c:817)

J  extBind is set to disp+work.ThSoBind(thxxsock.c:1841)

J  extAccept is set to disp+work.ThSoAccept(thxxsock.c:2028)

J  extListen is set to disp+work.ThSoListen(thxxsock.c:2282)

J  extPoll is set to disp+work.ThSoPoll(thxxsock.c:2439)

J  extShutdown is set to disp+work.ThSoShutdown(thxxsock.c:2700)

J  extGetSockOpt is set to disp+work.ThSoGetsockopt(thxxsock.c:2860)

J  extSetSockOpt is set to disp+work.ThSoSetsockopt(thxxsock.c:3042)

J  extGetSockName is set to disp+work.ThSoGetsockname(thxxsock.c:3207)

J  extGetRecvLength is set to disp+work.ThSoGetrecvlength(thxxsock.c:3396)

J  extSetNonBlocking is set to disp+work.ThSoSetnonblocking(thxxsock.c:3561)

J  extCreateControlArea is set to disp+work.ThJCreateControlArea(thxxvmemu.c:3834)

J  extGetControlArea is set to disp+work.ThJGetControlArea(thxxvmemu.c:3848)

J  extNotifyAboutControlFlagChange is set to disp+work.ThJControlFlagChange(thxxjava.c:7083)

J  extVmRunningInWp is set to disp+work.ThJVmRunningInWp(thxxjava.c:8918)

J  extVmRunningOnJavaStack is set to disp+work.ThJVmRunningOnJavaStack(thxxjava.c:8926)

J  extGetJavaMainStack is set to disp+work.ThJGetJavaMainStack(thxxjava.c:8931)

J  extAlarm is set to disp+work.ThJAlarm(thxxjava.c:7164)

J  setGlobalsHook is set to disp+work.ThJSetGlobals(thxxjava.c:7399)

J  getGlobalsHook is set to disp+work.ThJGetGlobals(thxxjava.c:7381)

J  getWpIdHook is set to disp+work.Java_com_sap_vmc_krn_wpinfo_Wp_getWpId(thrtwpj.c:705)

J  getWpNoHook is set to disp+work.ThGetWpNo(thxxtool.c:2033)

J  getVmCount is set to disp+work.dbac_unsupported(dbacfun.c:1300)

J  getEvtConnHdl is set to disp+work.ThJGetEvtConnHdl(thxxjava.c:1176)

J  selNextHdl is set to disp+work.ThVmcSelNextHdl(thxxvmio.c:337)

J  rollOut is set to disp+work.ThJRollOut(thxxjava.c:6629)

J  sleepFunc is set to disp+work.ThJSleep(thxxjava.c:8138)

J  selTimeout is set to disp+work.ThJSelTimeout(thxxjava.c:8708)

J  proxyWakeup is set to disp+work.ThJHandleProxyWakeup(thxxjava.c:9036)

J  extGetProxyActivatedHook is set to disp+work.ThJGetSapProxyActivated(thxxjava.c:8839)

J  getVmcFlavour is set to disp+work.ThJGetVmcFlavour(thxxjava.c:9101)

J  getVmType is set to disp+work.ThJGetVmType(thxxjava.c:9113)

J  getVmMaxNo is set to disp+work.ThJGetVmMaxNo(thxxvmemu.c:3772)

J  getVmId is set to disp+work.ThJGetActVmc(thxxjava.c:11884)

J  isValidVmId is set to disp+work.ThJisValidVmId(thxxvmemu.c:3807)

J  getVmUuid is set to disp+work.ThJGetVmUuid(thxxvmemu.c:3782)

J  createUniqueId is set to disp+work.ThJCreateUniqueId(thxxvmemu.c:3819)

J  statClock is set to disp+work.ThJClock(thxxjava.c:13183)

J  statClockDiff is set to disp+work.pfclock_diff(pfclock.c:1410)

J  statisticActive is set to disp+work.ThJStatisticsActive(thxxjava.c:9256)

J  openStatInterval is set to disp+work.ThJOpenStatInterval(thxxjava.c:9278)

J  closeStatInterval is set to disp+work.ThJCloseStatInterval(thxxjava.c:9294)

J  intervalStatActive is set to disp+work.ThJIntervalStatActive(thxxjava.c:9311)

J  extTrace is set to disp+work.ThJTrace(thxxvmemu.c:3864)

J  extGetBuiltinLibs is set to disp+work.ThJGetBuiltinLibs(thxxjava.c:7233)

J  extFindNative is set to disp+work.ThJFindNative(thxxvmemu.c:3885)

J  extPreloadNativeOpen is set to disp+work.ThJPreloadNativeOpen(thxxjava.c:7247)

J  extPreloadNativeSym is set to disp+work.ThJPreloadNativeSym(thxxjava.c:7259)

J  extGetDebugFlags is set to disp+work.ThVmcGetBitmasks(thxxvmc.c:3950)

J  extStartExternalTimer is set to disp+work.ThJStartExternalTimer(thxxjava.c:7271)

J  extStopExternalTimer is set to disp+work.ThJStopExternalTimer(thxxjava.c:7292)

J  extAsyncCompilerActive is set to disp+work.ThJAsyncCompilerActive(thxxjava.c:13009)

J  extCallAsyncCompiler is set to disp+work.ThJCallAsyncCompiler(thxxjava.c:13043)

J  extCheckSgc is set to disp+work.ThVmcCheckSGC(thxxvmc.c:7373)

J  extSharedWaterMark is set to disp+work.ThVmcSgcWaterMark(thxxvmc.c:7815)

J  extSharedWaterLevel is set to disp+work.ThVmcScgWaterLevel(thxxvmemu.c:4348)

J  extSharedWaterAlloc is set to disp+work.ThVmcScgWaterAlloc(thxxvmemu.c:4383)

J  extCheckForCleanup is set to <null>

J  extJvmxInit2 is set to <null>

J  extJvmxCleanup is set to <null>

J  extWriteSyslog is set to disp+work.ThJWriteSyslog(thxxjava.c:14198)

J  extRegisterSignal is set to disp+work.ThJRegisterSignalHandler(thxxjava.c:14246)

J  extVmcSetAvailable is set to disp+work.ThVmcSetAvailable(thxxjava.c:14299)

M  ThVmcInitWaitForVm: th_maxWaitForVmTime=30

I Tue Sep 03 12:56:13 2013

I  MtxInit: 0 0 0

M  SHM_PRES_BUF   (addr: 0000000011E70050, size: 4400000)

M  SHM_ROLL_AREA  (addr: 000007FFDDA80050, size: 268435456)

M  SHM_PAGING_AREA  (addr: 0000000013070050, size: 134217728)

M  SHM_ROLL_ADM   (addr: 00000000122B0050, size: 2678942)

M  SHM_PAGING_ADM  (addr: 0000000011780050, size: 525344)

M  ThCreateNoBuffer  allocated 544152 bytes for 1000 entries at 0000000011810050

M  ThCreateNoBuffer  index size: 3000 elems

M  ThCreateVBAdm  allocated 12176 bytes (50 server) at 00000000118B0050

X  EmInit: MmSetImplementation( 2 ).

X  MM global diagnostic options set: 0

X  <ES> client 0 initializing ....

X  Using implementation view

X  ES initialized.

X  mm.dump: set maximum dump mem to 96 MB

B Tue Sep 03 12:56:14 2013

B  dbntab: NTAB buffers attached

B  dbntab: Buffer FTAB(hash header)  (addr: 000000001B0800E0, size: 584)

B  dbntab: Buffer FTAB(anchor array) (addr: 000000001B080330, size: 320072)

B  dbntab: Buffer FTAB(item array)   (addr: 000000001B0CE580, size: 1280000)

B  dbntab: Buffer FTAB(data area)    (addr: 000000001B206D80, size: 30720000)

B  dbntab: Buffer IREC(hash header)  (addr: 000000001CF600E0, size: 584)

B  dbntab: Buffer IREC(anchor array) (addr: 000000001CF60330, size: 320072)

B  dbntab: Buffer IREC(item array)   (addr: 000000001CFAE580, size: 320000)

B  dbntab: Buffer IREC(data area)    (addr: 000000001CFFC780, size: 6144000)

B  dbntab: Buffer STAB(hash header)  (addr: 000000001D5E00E0, size: 584)

B  dbntab: Buffer STAB(anchor array) (addr: 000000001D5E0330, size: 320072)

B  dbntab: Buffer STAB(item array)   (addr: 000000001D62E580, size: 320000)

B  dbntab: Buffer STAB(data area)    (addr: 000000001D67C780, size: 3072000)

B  dbntab: Buffer TTAB(hash header)  (addr: 000000001D9700E0, size: 5576)

B  dbntab: Buffer TTAB(anchor array) (addr: 000000001D9716B0, size: 320072)

B  dbntab: Buffer TTAB(item array)   (addr: 000000001D9BF900, size: 800000)

B  dbntab: Buffer TTAB(data area)    (addr: 000000001DA82E00, size: 5840000)

B  db_con_shm_ini:  WP_ID = 0, WP_CNT = 48, CON_ID = -1

B  dbstat: TABSTAT buffer attached (addr: 000000001E044C60)

B  dbtbxbuf: Buffer TABL  (addr: 000000001EBD0160, size: 30000000, end: 000000002086C4E0)

B  dbtbxbuf: Buffer TABLP (addr: 0000000020870160, size: 10240000, end: 0000000021234160)

B  dbexpbuf: Buffer EIBUF (addr: 0000000021240170, size: 4194304, end: 0000000021640170)

B  dbexpbuf: Buffer ESM   (addr: 0000000021650170, size: 4194304, end: 0000000021A50170)

B  dbexpbuf: Buffer CUA   (addr: 0000000012540170, size: 3072000, end: 000000001282E170)

B  dbexpbuf: Buffer OTR   (addr: 0000000021A60170, size: 4194304, end: 0000000021E60170)

B  dbcalbuf: Buffer CALE  (addr: 0000000021E70050, size: 500000, end: 0000000021EEA170)

M  CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.

S  *** init spool environment

S  TSPEVJOB updates inside critical section: event_update_nocsec = 0

S  initialize debug system

T  Stack direction is downwards.

T  debug control: prepare exclude for printer trace

T  new memory block 000000000B2C6660

S  spool kernel/ddic check: Ok

S  using table TSP02FX for frontend printing

S  3 spool work process(es) found

S  frontend print via spool service enabled

S  printer list size is 150

S  printer type list size is 50

S  queue size (profile)   = 300

S  hostspool list size = 3000

S  option list size is 30

S      found processing queue enabled

S  found spool memory service RSPO-RCLOCKS at 000000002B1800D0

S  doing lock recovery

S  setting server cache root

S  found spool memory service RSPO-SERVERCACHE at 000000002B180EC0

S    using messages for server info

S  size of spec char cache entry: 297032 bytes (timeout 100 sec)

S  size of open spool request entry: 2512 bytes

S  immediate print option for implicitely closed spool requests is disabled

A  ***GENER* Trace switched on ***

A  ---PXA-------------------------------------------

A  PXA INITIALIZATION

A  PXA: Locked PXA-Semaphore.

A  System page size: 4kb, total admin_size: 23216kb, dir_size: 23036kb.

A  Attached to PXA (address 000007FFEDAB0050, size 300000K)

A  abap/pxa = shared protect gen_remote

A  PXA INITIALIZATION FINISHED

A  ---PXA-------------------------------------------

A  ABAP ShmAdm attached (addr=000007FF35FEE000 leng=20955136 end=000007FF373EA000)

A  >> Shm MMADM area (addr=000007FF364972E0 leng=247168 end=000007FF364D3860)

A  >> Shm MMDAT area (addr=000007FF364D4000 leng=15818752 end=000007FF373EA000)

A  RFC Destination> destination MDCSAP05_SR2_02 host MDCSAP05 system SR2 systnr 2 (MDCSAP05_SR2_02)

A  RFC Options> H=MDCSAP05,S=02,d=2,

A  RFC FRFC> fallback activ but this is not a central instance.

A   

A  RFC rfc/signon_error_log = -1

A  RFC rfc/dump_connection_info = 0

A  RFC rfc/dump_client_info = 0

A  RFC rfc/cp_convert/ignore_error = 1

A  RFC rfc/cp_convert/conversion_char = 23

A  RFC rfc/wan_compress/threshold = 251

A  RFC rfc/recorder_pcs not set, use defaule value: 2

A  RFC rfc/delta_trc_level not set, use default value: 0

A  RFC rfc/no_uuid_check not set, use default value: 0

A  RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0

A  RFC Method> initialize RemObjDriver for ABAP Objects

M  ThrCreateShObjects  allocated 99772 bytes at 0000000012830050

N  =================================================

N  === SSF INITIALIZATION:

N  ===...SSF Security Toolkit name SAPSECULIB .

N  ===...SSF library is C:\usr\sap\SR2\DVEBMGS02\exe\sapcrypto.dll .

N  ===...SSF default hash algorithm is SHA1 .

N  ===...SSF default symmetric encryption algorithm is DES-CBC .

N  ===...SECUDIR="C:\usr\sap\SR2\DVEBMGS02\sec"

N  ===...loading of Security Toolkit successfully completed.

N  ===   SAPCRYPTOLIB  5.5.5C pl29  (Jan 30 2010) MT-safe

N  =================================================

N  MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.

N  MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.

M  JrfcVmcRegister in process-driver OK

M  JrfcVmcRegisterNativesDriver o.k.

W  =================================================

W  === ipl_Init() called

B    dbtran INFO (init_connection '<DEFAULT>' [ORACLE:700.08]):

B     max_blocking_factor =   5,  max_in_blocking_factor      =   5,

B     min_blocking_factor =   5,  min_in_blocking_factor      =   5,

B     prefer_union_all    =   0,  prefer_join                 =   0,

B     prefer_fix_blocking =   0,  prefer_in_itab_opt          =   1,

B     convert AVG         =   0,  alias table FUPD            =   0,

B     escape_as_literal   =   1,  opt GE LE to BETWEEN        =   0,

B     select *            =0x0f,  character encoding          = STD / <none>:-,

B     use_hints           = abap->1, dbif->0x1, upto->2147483647, rule_in->0,

B                           rule_fae->0, concat_fae->0, concat_fae_or->0

W    ITS Plugin: Path dw_gui

W    ITS Plugin: Description ITS Plugin - ITS rendering DLL

W    ITS Plugin: sizeof(SAP_UC) 2

W    ITS Plugin: Release: 701, [7010.0.55.20020600]

W    ITS Plugin: Int.version, [33]

W    ITS Plugin: Feature set: [20]

W    ===... Calling itsp_Init in external dll ===>

W  === ipl_Init() returns 0, ITSPE_OK: OK

W  =================================================

N  VSI: WP init in ABAP VM completed with rc=0

E  Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume MDCSAP05_SR2_02

E  Profile-Parameter: enque/deque_wait_answer = FALSE

E  Replication is disabled

E  EnqCcInitialize: local lock table initialization o.k.

E  EnqId_SuppressIpc: local EnqId initialization o.k.

E  EnqCcInitialize: local enqueue client init o.k.

J Tue Sep 03 12:56:21 2013

J  <0> [1] Info: ServiceFramework:: Starting service: "LoggingService"<0> [1]

J  <0> [1] Info: ServiceFramework:: Service "LoggingService" started.<0> [1]

J  <0> [1] Info: ServiceFramework:: Starting service: "ConfigManagement"<0> [1]

B  dbslj: kernel version 20050900, java version 20050900

M  SosICreateNewAnchorArray: sos_search_anchor_semantics = 1

J Tue Sep 03 12:56:22 2013

J  <0> [1] Info: ServiceFramework:: Service "ConfigManagement" started.<0> [1]

J  <0> [1] Info: ServiceFramework:: Starting second stage of service "LoggingService".<0> [1]

J Tue Sep 03 12:56:23 2013

J  <0> [1] Info: ServiceFramework:: Service "LoggingService" started.<0> [1]

J  <0> [1] Info: ServiceFramework:: switching to real logging service<0> [1]

M  ThJSaveVmTemplate: created template >VM_TEMPLATE< V0

A Tue Sep 03 13:08:53 2013

A  ***GENER* Trace switched off ***

M  SecAudit(RsauShmInit): WP attached to existing shared memory.

M  SecAudit(RsauShmInit): addr of SCSA........... = 0000000002FA0050

M  SecAudit(RsauShmInit): addr of RSAUSHM........ = 0000000002FA07C0

M  SecAudit(RsauShmInit): addr of RSAUSLOTINFO... = 0000000002FA0800

M  SecAudit(RsauShmInit): addr of RSAUSLOTS...... = 0000000002FA080C

B Tue Sep 03 13:12:28 2013

B  dbmyclu : info : my major identification is 181300806, minor one 2.

B  dbmyclu : info : Time Reference is 1.12.2001 00:00:00h GMT.

B  dbmyclu : info : my initial uuid is E314576D23F953F18D570015C5894A51.

B  dbmyclu : info : current optimistic cluster level: 0

B  dbmyclu : info : pessimistic reads set to 2.

A Tue Sep 03 13:16:48 2013

A  *GENER* request remote generation: SAPLSPF2.

A Tue Sep 03 13:40:14 2013

A  *GENER* starting remote generation: SAPLSPF3 (requested by W2).

M Tue Sep 03 13:43:00 2013

M  in_ThErrHandle: 1

M  ThIErrHandle: new stat of W0 is WP_SHUTDOWN   

M  ThIErrHandle: I'm during shutdown

M  PfStatDisconnect: disconnect statistics

M  Entering ThSetStatError

M  ThCallDbBreak: use db_sqlbreak

B  db_sqlbreak() = 1

M  ThIErrHandle: don't try rollback again

M  ThShutDownServer: shutdown server

M  PfStatIndInit: Initializing Index-Record

M  PfWriteIntoFile: copied shared buf (156549 bytes) to local buf

M  PfWriteIntoFile: write 156549 bytes into stat-file

M  PfWriteIntoFile: writing Index

M   min. start   :1378184402/229543

M   min. end     :1378184402/296983

M   max. end     :1378186921/799755

M   wpid         :1

M   tasktypes    :119514

M   max. resp    :16073261

M   max. cpu     :5828125

M   max.db      

M   no. of recs  :642

M   no. of bytes :156549

M  PfFileIndUpd: hyperindex needs to be resorted

M  PfWriteIntoFile: updated fileindex for file stat.DAT with endtime 1378186921 (3:9:2013 5:42:1)

M  PfWriteIntoFile: updated fileindex

M  PfStatIndInit: Initializing Index-Record

M  PfWriteIntoFile: wrote buffer to file

M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)

M  Entering ThReadDetachMode

M  call ThrShutDown (1)...

B  Disconnecting from ALL connections:

B  Wp  Hdl ConName                        ConId     ConState     TX  HC  PRM RCT FRC TIM MAX OPT Date     Time   DBHost                       

B  000 000 R/3                            000000000 INACTIVE     NO  NO  YES NO  NO  000 255 255 20130903 125542 MDCSAP05                     

C  Disconnecting from connection 0 ...

C  Closing user session (con_hdl=0,svchp=0000000002DC7CC8,usrhp=0000000002DE0C20)

C  Detaching from DB Server (con_hdl=0,svchp=0000000002DC7CC8,srvhp=000000000B086D30)

C  Now I'm disconnected from ORACLE

B  Disconnected from connection 0

B  statistics db_con_commit (com_total=215, com_tx=14)

B  statistics db_con_rollback (roll_total=1, roll_tx=0)

M  ***LOG Q02=> wp_halt, WPStop (Workproc 0 3848) [dpnttool.c   334]

dev_disp


---------------------------------------------------
trc file: "dev_disp", trc level: 1, release: "701"
---------------------------------------------------
sysno      02
sid        SR2
systemid   562 (PC with Windows NT)
relno      7010
patchlevel 0
patchno    55
intno      20020600
make:      multithreaded, Unicode, 64 bit, optimized
pid        2648


Tue Sep 03 12:55:33 2013
kernel runs with dp version 242000(ext=110000) (@(#) DPLIB-INT-VERSION-242000-UC)
length of sys_adm_ext is 576 bytes
*** SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (02 2648) [dpxxdisp.c   1287]
shared lib "dw_xml.dll" version 55 successfully loaded
shared lib "dw_xtc.dll" version 55 successfully loaded
shared lib "dw_stl.dll" version 55 successfully loaded
shared lib "dw_gui.dll" version 55 successfully loaded
shared lib "dw_mdm.dll" version 55 successfully loaded
rdisp/softcancel_sequence :  -> 0,5,-1
use internal message server connection to port 3902

Tue Sep 03 12:55:38 2013
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  5532]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is active
DpIPCInit2: start server >MDCSAP05_SR2_02                         <
DpShMCreate: sizeof(wp_adm)  84096 (1752)
DpShMCreate: sizeof(tm_adm)  5912704 (29416)
DpShMCreate: sizeof(wp_ca_adm)  24064 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm)  552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=512/48/65600/90416/156064
DpShMCreate: sizeof(slock_adm)  156064 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=9200/16/883264/883280
DpShMCreate: sizeof(file_adm)  883280 (72)
DpShMCreate: sizeof(vmc_adm)  85744 (1864)
DpShMCreate: sizeof(wall_adm)  (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY  (addr: 0000000007190050, size: 7793536)
DpShMCreate: allocated sys_adm at 0000000007190050
DpShMCreate: allocated wp_adm at 0000000007192270
DpShMCreate: allocated tm_adm_list at 00000000071A6AF0
DpShMCreate: allocated tm_adm at 00000000071A6B50
DpShMCreate: allocated wp_ca_adm at 000000000774A3D0
DpShMCreate: allocated appc_ca_adm at 00000000077501D0
DpShMCreate: allocated comm_adm at 0000000007752110
DpShMCreate: allocated slock_adm at 00000000077D8DA0
DpShMCreate: allocated file_adm at 00000000077FEF40
DpShMCreate: allocated vmc_adm_list at 00000000078D6990
DpShMCreate: allocated gw_adm at 00000000078D6A10
DpShMCreate: allocated vmc_adm at 00000000078D6A40
DpShMCreate: allocated ca_info at 00000000078EB930
DpShMCreate: allocated wall_adm at 00000000078EB940
MBUF state OFF
DpCommInitTable: init table for 500 entries
DpFileInitTable: init table for 9200 entries
DpSesCreateTable: created session table at 0000000008600050 (len=145632)
rdisp/queue_size_check_value :  -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
<ES> Info: em/initial_size_MB( 16379MB) not multiple of em/blocksize_KB( 4096KB)
<ES> Info: em/initial_size_MB rounded up to 16380MB
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 4094 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
DpVmcInit2: o.k.

Tue Sep 03 12:55:42 2013
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1682]
***LOG Q0K=> DpMsAttach, mscon ( MDCSAP05) [dpxxdisp.c   12560]
DpStartStopMsg: send start message (myname is >MDCSAP05_SR2_02                         <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: start to initalize 3.X shared alert area (first segment).

Tue Sep 03 12:55:43 2013
DpMsgAdmin: Set release to 7010, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1048]
DpMsgAdmin: Set patchno for this platform to 55
Release check o.K.

Tue Sep 03 12:56:15 2013
MBUF state ACTIVE
DpModState: change server state from STARTING to ACTIVE

Tue Sep 03 13:43:00 2013
DpSigInt: caught signal 2
DpHalt: shutdown server >MDCSAP05_SR2_02                         < (normal)
DpModState: change server state from ACTIVE to SHUTDOWN
Stop work processes

Tue Sep 03 13:43:01 2013
Stop gateway
Stop icman
Terminate gui connections
wait for end of work processes
wait for end of gateway
waiting for termination of gateway ...

Tue Sep 03 13:43:02 2013
wait for end of icman
waiting for termination of icman ...

Tue Sep 03 13:43:03 2013
waiting for termination of icman ...

Tue Sep 03 13:43:04 2013
waiting for termination of icman ...

Tue Sep 03 13:43:05 2013
waiting for termination of icman ...

Tue Sep 03 13:43:06 2013
waiting for termination of icman ...

Tue Sep 03 13:43:07 2013
DpStartStopMsg: send stop message (myname is >MDCSAP05_SR2_02                         <)
DpStartStopMsg: stop msg sent

Tue Sep 03 13:43:08 2013
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   12906]
MBUF state OFF
MBUF component DOWN
cleanup EM
***LOG Q05=> DpHalt, DPStop ( 2648) [dpxxdisp.c   11122]

Thanks!

I'll be looking forward for you replies. Thanks folks!

Accepted Solutions (0)

Answers (6)

Answers (6)

Former Member
0 Kudos

I am trying to connect to SAPMMC and when trying to connect i am getting the dispatcher error. Please find the below trace where the Disp+work.exe connects to the Message server and then gets ended in sometime. I am very new to this environment so kindly help me fix it.

In case any other log file has to be given then do let me know how to get the details.

---------------------------------------------------

trc file: "dev_disp", trc level: 1, release: "700"

---------------------------------------------------

sysno      00

sid        DEV

systemid   560 (PC with Windows NT)

relno      7000

patchlevel 0

patchno    111

intno      20050900

make:      multithreaded, Unicode, optimized

pid        2128

Wed Nov 27 18:46:43 2013

kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)

length of sys_adm_ext is 576 bytes

*** SWITCH TRC-HIDE on ***

***LOG Q00=> DpSapEnvInit, DPStart (00 2128) [dpxxdisp.c   1239]

    shared lib "dw_xml.dll" version 111 successfully loaded

    shared lib "dw_xtc.dll" version 111 successfully loaded

    shared lib "dw_stl.dll" version 111 successfully loaded

    shared lib "dw_gui.dll" version 111 successfully loaded

    shared lib "dw_mdm.dll" version 111 successfully loaded

rdisp/softcancel_sequence :  -> 0,5,-1

use internal message server connection to port 3900

Wed Nov 27 18:46:47 2013

*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds

***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  5361]

MtxInit: 30000 0 0

DpSysAdmExtInit: ABAP is active

DpSysAdmExtInit: VMC (JAVA VM in WP) is not active

DpIPCInit2: start server >kmylavarapu_DEV_00                      <

DpShMCreate: sizeof(wp_adm)        18672    (1436)

DpShMCreate: sizeof(tm_adm)        4232256    (21056)

DpShMCreate: sizeof(wp_ca_adm)        24000    (80)

DpShMCreate: sizeof(appc_ca_adm)    8000    (80)

DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064

DpShMCreate: sizeof(comm_adm)        528064    (1048)

DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0

DpShMCreate: sizeof(slock_adm)        0    (96)

DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0

DpShMCreate: sizeof(file_adm)        0    (72)

DpShMCreate: sizeof(vmc_adm)        0    (1536)

DpShMCreate: sizeof(wall_adm)        (38456/34360/64/184)

DpShMCreate: sizeof(gw_adm)    48

DpShMCreate: SHM_DP_ADM_KEY        (addr: 06810040, size: 4892312)

DpShMCreate: allocated sys_adm at 06810040

DpShMCreate: allocated wp_adm at 06812090

DpShMCreate: allocated tm_adm_list at 06816980

DpShMCreate: allocated tm_adm at 068169B0

DpShMCreate: allocated wp_ca_adm at 06C1FDF0

DpShMCreate: allocated appc_ca_adm at 06C25BB0

DpShMCreate: allocated comm_adm at 06C27AF0

DpShMCreate: system runs without slock table

DpShMCreate: system runs without file table

DpShMCreate: allocated vmc_adm_list at 06CA89B0

DpShMCreate: allocated gw_adm at 06CA89F0

DpShMCreate: system runs without vmc_adm

DpShMCreate: allocated ca_info at 06CA8A20

DpShMCreate: allocated wall_adm at 06CA8A28

MBUF state OFF

DpCommInitTable: init table for 500 entries

Wed Nov 27 18:46:48 2013

EmInit: MmSetImplementation( 2 ).

MM global diagnostic options set: 0

<ES> client 0 initializing ....

<ES> InitFreeList

<ES> block size is 1024 kByte.

Using implementation view

<EsNT> Using memory model view.

<EsNT> Memory Reset disabled as NT default

<ES> 511 blocks reserved for free list.

ES initialized.

rdisp/http_min_wait_dia_wp : 1 -> 1

***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1629]

***LOG Q0K=> DpMsAttach, mscon ( kmylavarapu) [dpxxdisp.c   11753]

DpStartStopMsg: send start message (myname is >kmylavarapu_DEV_00                      <)

DpStartStopMsg: start msg sent

CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.

CCMS: Initalizing shared memory of size 60000000 for monitoring segment.

CCMS: start to initalize 3.X shared alert area (first segment).

DpMsgAdmin: Set release to 7000, patchlevel 0

MBUF state PREPARED

MBUF component UP

DpMBufHwIdSet: set Hardware-ID

***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]

DpMsgAdmin: Set patchno for this platform to 111

Release check o.K.

Wed Nov 27 18:47:28 2013

*** ERROR => W0 (pid 2784) died [dpxxdisp.c   14441]

*** ERROR => W1 (pid 2788) died [dpxxdisp.c   14441]

*** ERROR => W2 (pid 2796) died [dpxxdisp.c   14441]

*** ERROR => W3 (pid 2816) died [dpxxdisp.c   14441]

*** ERROR => W4 (pid 2820) died [dpxxdisp.c   14441]

*** ERROR => W5 (pid 2828) died [dpxxdisp.c   14441]

my types changed after wp death/restart 0xbf --> 0xbe

*** ERROR => W6 (pid 2836) died [dpxxdisp.c   14441]

my types changed after wp death/restart 0xbe --> 0xbc

*** ERROR => W7 (pid 2844) died [dpxxdisp.c   14441]

my types changed after wp death/restart 0xbc --> 0xb8

*** ERROR => W8 (pid 2640) died [dpxxdisp.c   14441]

*** ERROR => W9 (pid 2648) died [dpxxdisp.c   14441]

*** ERROR => W10 (pid 2812) died [dpxxdisp.c   14441]

my types changed after wp death/restart 0xb8 --> 0xb0

*** ERROR => W11 (pid 2632) died [dpxxdisp.c   14441]

my types changed after wp death/restart 0xb0 --> 0xa0

*** ERROR => W12 (pid 2616) died [dpxxdisp.c   14441]

my types changed after wp death/restart 0xa0 --> 0x80

*** DP_FATAL_ERROR => DpWPCheck: no more work processes

*** DISPATCHER EMERGENCY SHUTDOWN ***

increase tracelevel of WPs

NiWait: sleep (10000ms) ...

NiISelect: timeout 10000ms

NiISelect: maximum fd=1589

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Wed Nov 27 18:47:38 2013

NiISelect: TIMEOUT occured (10000ms)

dump system status

Workprocess Table (long)            Wed Nov 27 13:17:38 2013

========================

No Ty. Pid      Status  Cause Start Err Sem CPU    Time  Program          Cl  User         Action                    Table

-------------------------------------------------------------------------------------------------------------------------------

0 DIA     2784 Ended         no      1   0        0                                                                         

1 DIA     2788 Ended         no      1   0        0                                                                         

2 DIA     2796 Ended         no      1   0        0                                                                         

3 DIA     2816 Ended         no      1   0        0                                                                         

4 DIA     2820 Ended         no      1   0        0                                                                         

5 DIA     2828 Ended         no      1   0        0                                                                         

6 UPD     2836 Ended         no      1   0        0                                                                         

7 ENQ     2844 Ended         no      1   0        0                                                                         

8 BTC     2640 Ended         no      1   0        0                                                                         

9 BTC     2648 Ended         no      1   0        0                                                                         

10 BTC     2812 Ended         no      1   0        0                                                                         

11 SPO     2632 Ended         no      1   0        0                                                                         

12 UP2     2616 Ended         no      1   0        0                                                                         

Dispatcher Queue Statistics            Wed Nov 27 13:17:38 2013

===========================

+------+--------+--------+--------+--------+--------+

|  Typ |    now |   high |    max | writes |  reads |

+------+--------+--------+--------+--------+--------+

| NOWP |      0 |      2 |   2000 |      5 |      5 |

+------+--------+--------+--------+--------+--------+

|  DIA |      5 |      5 |   2000 |      5 |      0 |

+------+--------+--------+--------+--------+--------+

|  UPD |      0 |      0 |   2000 |      0 |      0 |

+------+--------+--------+--------+--------+--------+

|  ENQ |      0 |      0 |   2000 |      0 |      0 |

+------+--------+--------+--------+--------+--------+

|  BTC |      0 |      0 |   2000 |      0 |      0 |

+------+--------+--------+--------+--------+--------+

|  SPO |      0 |      0 |   2000 |      0 |      0 |

+------+--------+--------+--------+--------+--------+

|  UP2 |      0 |      0 |   2000 |      0 |      0 |

+------+--------+--------+--------+--------+--------+

max_rq_id        12

wake_evt_udp_now    0

wake events          total     8,  udp     6 ( 75%),  shm     2 ( 25%)

since last update    total     8,  udp     6 ( 75%),  shm     2 ( 25%)

Dump of tm_adm structure:            Wed Nov 27 13:17:38 2013

=========================

Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)

Workprocess Comm. Area Blocks            Wed Nov 27 13:17:38 2013

=============================

Slots: 300, Used: 1, Max: 0

+------+--------------+----------+-------------+

|   id | owner        |   pid    | eyecatcher  |

+------+--------------+----------+-------------+

|    0 | DISPATCHER   |       -1 | *WPCAAD000* |

NiWait: sleep (5000ms) ...

NiISelect: timeout 5000ms

NiISelect: maximum fd=1589

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Wed Nov 27 18:47:43 2013

NiISelect: TIMEOUT occured (5000ms)

DpHalt: shutdown server >kmylavarapu_DEV_00                      < (normal)

DpJ2eeDisableRestart

DpModState: buffer in state MBUF_PREPARED

NiBufSend starting

NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)

MsINiWrite: sent 110 bytes

MsIModState: change state to SHUTDOWN

DpModState: change server state from STARTING to SHUTDOWN

Switch off Shared memory profiling

ShmProtect( 57, 3 )

ShmProtect(SHM_PROFILE, SHM_PROT_RW

ShmProtect( 57, 1 )

ShmProtect(SHM_PROFILE, SHM_PROT_RD

DpWakeUpWps: wake up all wp's

Stop work processes

Stop gateway

killing process (2208) (SOFT_KILL)

Stop icman

killing process (2740) (SOFT_KILL)

Terminate gui connections

wait for end of work processes

wait for end of gateway

[DpProcDied] Process lives  (PID:2208  HANDLE:1560)

waiting for termination of gateway ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=1589

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Wed Nov 27 18:47:44 2013

NiISelect: TIMEOUT occured (1000ms)

[DpProcDied] Process died  (PID:2208  HANDLE:1560)

wait for end of icman

[DpProcDied] Process lives  (PID:2740  HANDLE:1564)

waiting for termination of icman ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=1589

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Wed Nov 27 18:47:45 2013

NiISelect: TIMEOUT occured (1000ms)

[DpProcDied] Process lives  (PID:2740  HANDLE:1564)

waiting for termination of icman ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=1589

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Wed Nov 27 18:47:46 2013

NiISelect: TIMEOUT occured (1000ms)

[DpProcDied] Process lives  (PID:2740  HANDLE:1564)

waiting for termination of icman ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=1589

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Wed Nov 27 18:47:47 2013

NiISelect: TIMEOUT occured (1000ms)

[DpProcDied] Process lives  (PID:2740  HANDLE:1564)

waiting for termination of icman ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=1589

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Wed Nov 27 18:47:48 2013

NiISelect: TIMEOUT occured (1000ms)

[DpProcDied] Process lives  (PID:2740  HANDLE:1564)

waiting for termination of icman ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=1589

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Wed Nov 27 18:47:49 2013

NiISelect: TIMEOUT occured (1000ms)

[DpProcDied] Process lives  (PID:2740  HANDLE:1564)

waiting for termination of icman ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=1589

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Wed Nov 27 18:47:50 2013

NiISelect: TIMEOUT occured (1000ms)

[DpProcDied] Process lives  (PID:2740  HANDLE:1564)

waiting for termination of icman ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=1589

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Wed Nov 27 18:47:51 2013

NiISelect: TIMEOUT occured (1000ms)

[DpProcDied] Process lives  (PID:2740  HANDLE:1564)

waiting for termination of icman ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=1589

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Wed Nov 27 18:47:52 2013

NiISelect: TIMEOUT occured (1000ms)

[DpProcDied] Process lives  (PID:2740  HANDLE:1564)

waiting for termination of icman ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=1589

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Wed Nov 27 18:47:53 2013

NiISelect: TIMEOUT occured (1000ms)

[DpProcDied] Process lives  (PID:2740  HANDLE:1564)

waiting for termination of icman ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=1589

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Wed Nov 27 18:47:54 2013

NiISelect: TIMEOUT occured (1000ms)

[DpProcDied] Process lives  (PID:2740  HANDLE:1564)

waiting for termination of icman ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=1589

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Wed Nov 27 18:47:55 2013

NiISelect: TIMEOUT occured (1000ms)

[DpProcDied] Process died  (PID:2740  HANDLE:1564)

DpStartStopMsg: send stop message (myname is >kmylavarapu_DEV_00                      <)

NiIMyHostName: hostname = 'kmylavarapu'

AdGetSelfIdentRecord: >                                                                           <

AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0

AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0

DpConvertRequest: net size = 189 bytes

NiBufSend starting

NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)

MsINiWrite: sent 562 bytes

send msg (len 110+452) to name                    -, type 4, key -

DpStartStopMsg: stop msg sent

NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)

NiBufIIn: NIBUF len=274

NiBufIIn: packet complete for hdl 2

NiBufReceive starting

MsINiRead: received 274 bytes

MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -

DpHalt: received 164 bytes from message server

NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)

NiBufIIn: NIBUF len=274

NiBufIIn: packet complete for hdl 2

NiBufReceive starting

MsINiRead: received 274 bytes

MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -

DpHalt: received 164 bytes from message server

NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)

NiBufIIn: NIBUF len=274

NiBufIIn: packet complete for hdl 2

NiBufReceive starting

MsINiRead: received 274 bytes

MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -

DpHalt: received 164 bytes from message server

NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)

NiBufIIn: NIBUF len=274

NiBufIIn: packet complete for hdl 2

NiBufReceive starting

MsINiRead: received 274 bytes

MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -

DpHalt: received 164 bytes from message server

NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)

NiBufIIn: NIBUF len=274

NiBufIIn: packet complete for hdl 2

NiBufReceive starting

MsINiRead: received 274 bytes

MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -

DpHalt: received 164 bytes from message server

NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)

NiBufIIn: NIBUF len=274

NiBufIIn: packet complete for hdl 2

NiBufReceive starting

MsINiRead: received 274 bytes

MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -

DpHalt: received 164 bytes from message server

NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)

NiBufIIn: NIBUF len=274

NiBufIIn: packet complete for hdl 2

NiBufReceive starting

MsINiRead: received 274 bytes

MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -

DpHalt: received 164 bytes from message server

NiIRead: hdl 2 recv would block (errno=EAGAIN)

NiIRead: read for hdl 2 timed out (0ms)

DpHalt: no more messages from the message server

DpHalt: send keepalive to synchronize with the message server

NiBufSend starting

NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)

MsINiWrite: sent 114 bytes

send msg (len 110+4) to name           MSG_SERVER, type 0, key -

MsSndName: MS_NOOP ok

Send 4 bytes to MSG_SERVER

NiIRead: hdl 2 recv would block (errno=EAGAIN)

NiIPeek: peek successful for hdl 2 (r)

NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)

NiBufIIn: NIBUF len=114

NiBufIIn: packet complete for hdl 2

NiBufReceive starting

MsINiRead: received 114 bytes

MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -

Received 4 bytes from MSG_SERVER                             

Received opcode MS_NOOP from msg_server, reply MSOP_OK

MsOpReceive: ok

MsSendKeepalive : keepalive sent to message server

NiIRead: hdl 2 recv would block (errno=EAGAIN)

Wed Nov 27 18:47:56 2013

NiIPeek: peek for hdl 2 timed out (r; 1000ms)

NiIRead: read for hdl 2 timed out (1000ms)

DpHalt: no more messages from the message server

DpHalt: sync with message server o.k.

detach from message server

***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   12099]

NiBufSend starting

NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)

MsINiWrite: sent 110 bytes

MsIDetach: send logout to msg_server

MsIDetach: call exit function

DpMsShutdownHook called

NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0

SiSelNSet: set events of sock 1500 to: ---

NiBufISelRemove: remove hdl 2 from set0

SiSelNRemove: removed sock 1500 (pos=2)

SiSelNRemove: removed sock 1500

NiSelIRemove: removed hdl 2

MBUF state OFF

AdGetSelfIdentRecord: >                                                                           <

AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0

AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0

AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0

blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13

LOCK WP ca_blk 1

make DISP owner of wp_ca_blk 1

DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)

MBUF component DOWN

NiICloseHandle: shutdown and close hdl 2 / sock 1500

NiBufIClose: clear extension for hdl 2

MsIDetach: detach MS-system

cleanup EM

EsCleanup ....

EmCleanup() -> 0

Es2Cleanup: Cleanup ES2

***LOG Q05=> DpHalt, DPStop ( 2128) [dpxxdisp.c   10371]

Good Bye .....

Former Member
0 Kudos

Please open this as a new call and attach (rather than paste) the log so that you get a better response.

regards,

Graham

former_member184544
Participant
0 Kudos

Hi Kevin,

Looks like the server was available for around 40 mins after it started .

Can you check what the default trace says and if the license has not expired.

Also what does the default trace say ?

Former Member
0 Kudos

Hi Vasu,

The server was available a couple of days ago but after I tried to implement SSL on it, it got wrecked. I restored the previous values but this is now the problem. Disp+work.exe stopped working for a couple of days. Tried to check the logs but still no success

I cant see the default trace since I dont have a j2ee folder

Thanks!

Kevs

former_member183107
Contributor
0 Kudos

Hi kevin,

Try this:-

Right click the disp+work in sap mmc and paste its developer trace here.

Regards,

Himanshu

JPReyes
Active Contributor
0 Kudos

The server was available a couple of days ago but after I tried to implement SSL on it, it got wrecked, I restored the previous values but this is now the problem.

Ok, so you disabled/commented out the parameters right?... also, to set up SSL you must have downloaded and decompressed the SAPCryptolib on the kernel directory, did you try by returning to the previous kernel or installing a new one?

Regards, Juan

Former Member
0 Kudos

Hi Himanshu,

Here's the developer trace. Kindly check attached file.

Thanks!

Regards,

Kevs

Former Member
0 Kudos

Hi Juan,

I returned back the old parameter rather than the one I have created for the SSL.

I downloaded sapcrytolib and copied "sapcrypto.dll" and "sapgenpse" to the exe folder. and "ticket" to the sec folder. I did this while I was doing SSL.

Does this have an effect to the system? Like it will cause the disp+work.exe to stop?

Kindly enlighten me in this one anyone

Thanks!

Regards,

Kevs

Reagan
Advisor
Advisor
0 Kudos

Hello

A Tue Sep 03 13:16:48 2013

A  *GENER* request remote generation: SAPLSPF2.

A

A Tue Sep 03 13:40:14 2013

A  *GENER* starting remote generation: SAPLSPF3 (requested by W2).

M

M Tue Sep 03 13:43:00 2013

M  in_ThErrHandle: 1

M  ThIErrHandle: new stat of W0 is WP_SHUTDOWN  

M  ThIErrHandle: I'm during shutdown

For sure the system was up and running for some time.

It appears to be a memory related issue.

Check whether the memory parameters set on system are according to the recommended values.

Run sappfpar against the instance profile and correct the values if required.

Regards

RB

Former Member
0 Kudos

Hi RB,

I'll try to check the memory parameters and will update you as soon as I have done checking on the parameters. BTW, Can I ask if what specific profile name will i run in sappfpar?

Thanks!

Kevs

former_member185239
Active Contributor
0 Kudos

Hi Kevin,

Try to telnet the hostname from the server to port message server

1. telnet mdcsap05.maniladc.com 3602

Paste the output

2. telnet 10.206.110.70 3602

paste the output

With Regards

Ashutosh Chaturvedi

former_member185239
Active Contributor
0 Kudos

Hi Kevin,

Also check the stderr log file and paste the content if you find any error.

With Regards

Ashutosh Chaturvedi

Former Member
0 Kudos

Hi Ash,

Tried doing telnet, here are the following outputs:

1. NI_PING

   Connection to host lost.

2. NI_PING 

   Connection to host lost.

What does this mean?

Here's the stderr.log file. Kindly see attached file for reference

Thanks!

Kevs

former_member185239
Active Contributor
0 Kudos

Hi Kevin,

Have you try to telnet

Please run the below command

telnet mdcsap05.maniladc.com 3602 on cmd and paste the output

also run the below command on cmd

telnet 10.206.110.70 3602

With Regards

Ashutosh Chaturvedi


Former Member
0 Kudos

Hi Ash,

I've done telnet with the command "telnet mdcsap05.maniladc.com 3602" and "telnet 10.206.110.70 3602" but the ouput for both commands is:

NI_PING 

Connection to host lost.

Thanks!

Kevs

Reagan
Advisor
Advisor
0 Kudos

Hello

Stop the SAP system and restart the Windows machine and then start SAP

Check if that helps you.

Regards

RB

Former Member
0 Kudos

Hi RB,

I've done this a couple of times in this sequence:

Stop SAP > Stop DB > Restart Windows > Start DB > Start SAP

and the same thing happens... disp+work.exe still stops.

Thanks!

Kevs

Former Member
0 Kudos

Hi,

A couple of things I noted:

1. you have raised two calls, so can you close one of these please?

2. DEV_W0 and DEV_DISP are from Sept 03 rather than today.

3. Can you attach files next time rather than pasting the information in.

To get the system up and running, change the profile back to the old settings at the OS level and restart should work without SSL.

Once up and running, show us the Instance Profile parameters you set to turn on SSL as the issue is likely to be there.

Regards,

Graham

Former Member
0 Kudos

Hi,

Thanks for the info. I have changed back the profile back to the old one but the disp+work.exe still doesnt run. I dont know what happened in there.

Regards,

Kevs

Former Member
0 Kudos

Hi Graham,

    The R3trans states that there is a connectivity between the database and the SAP.

Here I feel that either the profiles are wrong may be permission issue or it is corrupted.

Try to open and create a new file with the same name and try to start the SAP system.

Thanks and Regards,

Vimal

Former Member
0 Kudos

Hi Vimal,

The profile I am using now is the last known working profile before I have changed the profile.

Kindly see this attached file if there are any discrepancy in the profile

Hoping to solve this problem. Thanks!

Regards,

Kevs

Former Member
0 Kudos

Hi,

Thanks for the profile.. It seems to be fine.

Do u have a backup of your old profile.

If yes, can you please try to use that and check whether it resolves.

is it possible you can restart the Server completely and check again?

Thanks and Regards,

Vimal

Former Member
0 Kudos

Hello,

I have used the old profile but the same problem occured. Still the dev+disp.exe stopped.

msg_server.exe is running and so is igswd.exe. After restarting the system, the dispatcher displays the status "Running but not connected to message server".

I have also tried stoping the system and then shutting down the database and have restarted the server but still the same problem occured.

Still looking for suggestions

Regards,

Kevs

Former Member
0 Kudos

Hi,

     Please go to run-> services.msc and check whether all SAP services are running fine.

Recenlty did you do any kernel upgrades?

Please wait till the disp+work says either stopped  or "Running but not connected to message server"

Thanks and Regards,

Vimal

Former Member
0 Kudos

Hi Kevin,

Can you try logging into the system, I guess your system is started even though disp+work is yellow.

Can you please try executing disp+work in the command prompt, stderr log file may give you some more information regarding the start-up issue  in this case.

Regarding the disp+work showing yellow, this generally occurs when you have different versions of librfc32.dll in your kernel and your system32 directory.

Thanks

Sheetal

Former Member
0 Kudos

Hi Vimal,

I've checked services.msc and all sap services are running(started)

I think we didnt upgraded the kernel but what if the old admin upgraded the kernel? What specific actions will I need to do?

After restarting the system, its says "Running but not connected to message server" but after a few seconds, it is stopped.

Edit:

BTW my kernel release is 701 patch number 55.

Thanks!

Regards,

Kevs

Former Member
0 Kudos

Hi Sheetal,

I've tried logging into the system but cannot connect because the disp+work is gray (stopped). After restarting the system, it is turned to yellow first then after a few seconds it turned to gray.

I have executed disp+work.exe in cmd and i'll attach the file in this reply. Please see it

I think this has something to do with the kernel. BTW my kernel is 701. Any advice for checking kernel compatability? I'm new to this kind of problem.

Thanks!

Kevs

Former Member
0 Kudos

Hi Gernel Kevin Molina,

>After restarting the system, its says "Running but not connected to message server" but after a few      

  seconds, it is stopped.

As you stated that when you restart it is showing Running but not connected to message server, the problem might be the port number of your message server is not open for communication.

Also check whether the IP address is resolved in hosts file properly.

Former Member
0 Kudos

As mentioned by Graham logs you provided from Sep 03. Please restart the system and attach new log files.

Former Member
0 Kudos

Hi Sudhir,

I have checked the port number from the profile paramaters but it's correct.

I have also checked the port in using netstat in cmd heres the result

The 3902 port has a listening status but not established unlike the other working systems.

I have checked also the hosts file and I think its correct since i didnt change anything to it before doing the SSL implementation.

Thanks and Regards,

Kevs

Former Member
0 Kudos

I have restarted the system and yet the logs are still from sep 03

Regards,

Kevs

Former Member
0 Kudos

Please check startsap.trc and startsap_<instance name>.log files or attach it here.

Former Member
0 Kudos

Hi ,

Can you please login as sidadm and execute R3trans -d and share the trans.log ??

Thanks and Regards,

Vimal

Former Member
0 Kudos

Hi Vimal,

I have executed r3trans and this is what i've found in the trans.log file

Please see attached file

Thanks

Regards,

Kevs

former_member183107
Contributor
0 Kudos

Hi Gernel,

Try to upgrade the kernel and then restart the whole server as well as sap.

Regards,

Himanshu

Former Member
0 Kudos

Hi Himanshu,

I'll try to upgrade the Kernel. I'll reply to you as soon as I get this done.

Thanks!

Kevs

former_member183107
Contributor
0 Kudos

Also, please right click the disp+work in sap mmc and paste its developer trace here.

Former Member
0 Kudos

Hi,

please see the dev trace(attached file)

Thanks!

Kevs