on 03-09-2007 5:35 PM
Installed NW04 BI3.5 on windows2003, Oracle 9.2. SAP instance was up and running after installation but as soon as i did the kernel upgrade, disp+work shows being stopped in MMC. Here is the developer trace:
-
trc file: "dev_disp", trc level: 1, release: "640"
-
Thu Mar 08 20:23:57 2007
kernel runs with dp version 128(ext=102) (@(#) DPLIB-INT-VERSION-128)
length of sys_adm_ext is 312 bytes
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 43
intno 20020600
make: multithreaded, ASCII
pid 2556
***LOG Q00=> DpSapEnvInit, DPStart (30 2556) [dpxxdisp.c 1100]
shared lib "dw_xml.dll" version 43 successfully loaded
shared lib "dw_xtc.dll" version 43 successfully loaded
shared lib "dw_stl.dll" version 43 successfully loaded
shared lib "dw_gui.dll" version 43 successfully loaded
Thu Mar 08 20:24:01 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3886]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: JAVA is not active
DpShMCreate: sizeof(wp_adm) 6624 (828)
DpShMCreate: sizeof(tm_adm) 2219848 (11044)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 192000 (384)
DpShMCreate: sizeof(vmc_adm) 0 (320)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY (addr: 05720040, size: 2505416)
DpShMCreate: allocated sys_adm at 05720040
DpShMCreate: allocated wp_adm at 057217A8
DpShMCreate: allocated tm_adm_list at 05723188
DpShMCreate: allocated tm_adm at 057231B0
DpShMCreate: allocated wp_ca_adm at 059410F8
DpShMCreate: allocated appc_ca_adm at 05945748
DpShMCreate: allocated comm_adm_list at 05946EB8
DpShMCreate: allocated comm_adm at 05946ED0
DpShMCreate: allocated vmc_adm_list at 05975CD0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 05975CF8
DpShMCreate: allocated wall_adm at 05975D00
Thu Mar 08 20:24:02 2007
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 2303 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( bwserver) [dpxxdisp.c 9736]
Thu Mar 08 20:24:03 2007
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 43
Release check o.K.
Thu Mar 08 20:24:43 2007
MBUF state ACTIVE
Thu Mar 08 20:24:45 2007
DpModState: change server state from STARTING to ACTIVE
Thu Mar 08 20:24:46 2007
SoftCancel request for T9 U10 M0 received from ICMAN
Thu Mar 08 20:42:56 2007
DpSigInt: caught signal 2
Shutdown server ...
DpModState: change server state from ACTIVE to SHUTDOWN
Stop work processes...
Thu Mar 08 20:42:57 2007
Stop gateway
Stop icman
Terminate gui connections
waiting for termination of gateway
Thu Mar 08 20:42:58 2007
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9962]
MBUF state OFF
MBUF component DOWN
***LOG Q05=> DpHalt, DPStop ( 2556) [dpxxdisp.c 8495]
Not sure how to proceed. Any help would be appreciated.
Thanks.
Munish
Hello,
You seem to be running a variety of versions of software components.
I believe that by upgrading to latest kernel versions, including latest sapmmc version, then upgrading support package level to the max, should solve most problems. Then, if you still get the yellow dispatcher problem, get back to us in the forum.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Sc.exe comes with Win32 SDK that i dont have as of now. Also i did find a few questions and responses on sdn forum regarding dispatcher being yellow in MMC.
I just wanted to do some BI stuff on the server and it seems like updates and everything is going to take too long. I have successfully installed BICONT and i guess i will be ok for now even if i dont bring my system up-to-date.
Thanks a bunch guys for your help and response.
Manish.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Check also dev_w0 for possible errors. In dev_disp one can see that there is a network issue but this doesn't seem to be the problem.
--
Markus
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
This is what i have in dev_w0:
-
trc file: "dev_w0", trc level: 1, release: "640"
-
*
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
*
B
B Thu Mar 08 20:24:03 2007
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\C11\SYS\exe\run\dboraslib.dll' ...
B Library 'C:\usr\sap\C11\SYS\exe\run\dboraslib.dll' loaded
B Version of 'C:\usr\sap\C11\SYS\exe\run\dboraslib.dll' is "640.00", patchlevel (0.39)
B New connection 0 created
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 43
M intno 20020600
M make: multithreaded, ASCII
M pid 2704
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2704) [dpxxdisp.c 1160]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: JAVA is not active
M DpShMCreate: sizeof(wp_adm) 6624 (828)
M DpShMCreate: sizeof(tm_adm) 2219848 (11044)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 192000 (384)
M DpShMCreate: sizeof(vmc_adm) 0 (320)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 05F20040, size: 2505416)
M DpShMCreate: allocated sys_adm at 05F20040
M DpShMCreate: allocated wp_adm at 05F217A8
M DpShMCreate: allocated tm_adm_list at 05F23188
M DpShMCreate: allocated tm_adm at 05F231B0
M DpShMCreate: allocated wp_ca_adm at 061410F8
M DpShMCreate: allocated appc_ca_adm at 06145748
M DpShMCreate: allocated comm_adm_list at 06146EB8
M DpShMCreate: allocated comm_adm at 06146ED0
M DpShMCreate: allocated vmc_adm_list at 06175CD0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 06175CF8
M DpShMCreate: allocated wall_adm at 06175D00
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Thu Mar 08 20:24:04 2007
M calling db_connect ...
C Got ORACLE_HOME=C:\oracle\C11\920 from environment
C
C Thu Mar 08 20:24:06 2007
C Client NLS settings: AMERICAN_AMERICA.WE8DEC
C Got TNS_ADMIN=
bwserver\sapmnt\C11\SYS\profile\oracle from environment
C Logon as OPS$-user to get SAPC11's password
C Connecting as /@C11 on connection 0 ...
C Attaching to DB Server C11 (con_hdl=0,svchp=03F0325C,svrhp=03F03E34)
C
C Thu Mar 08 20:24:42 2007
C Starting user session (con_hdl=0,svchp=03F0325C,srvhp=03F03E34,usrhp=03F0C60C)
C Now I'm connected to ORACLE
C Got SAPC11's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=03F0325C,usrhp=03F0C60C)
C Now I'm disconnected from ORACLE
C Connecting as SAPC11/<pwd>@C11 on connection 0 ...
C Starting user session (con_hdl=0,svchp=03F0325C,srvhp=03F03E34,usrhp=03F0C60C)
C Now I'm connected to ORACLE
C Database NLS settings: AMERICAN_AMERICA.WE8DEC
C Database instance c11 is running on BWSERVER with ORACLE version 9.2.0.4.0 since 20070308
B Connection 0 opened
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20070308 202404 BWSERVER
M db_connect o.k.
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 08920040, size: 4400000)
M SHM_ROLL_AREA (addr: 30940040, size: 268435456)
M SHM_PAGING_AREA (addr: 10340040, size: 134217728)
M SHM_ROLL_ADM (addr: 08D60040, size: 2678942)
M SHM_PAGING_ADM (addr: 00350040, size: 525344)
M ThCreateNoBuffer allocated 320144 bytes for 1000 entries at 08FF0040
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 7424 bytes (50 server) at 003E0040
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation flat
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 8
B dbtbxbuf: Buffer TABL (addr: 0C2F00C8, size: 30000000, end: 0DF8C448)
B dbtbxbuf: Buffer TABLP (addr: 0DF900C8, size: 10240000, end: 0E9540C8)
B dbexpbuf: Buffer EIBUF (addr: 0E9600D0, size: 4194304, end: 0ED600D0)
B dbexpbuf: Buffer ESM (addr: 0ED700D0, size: 4194304, end: 0F1700D0)
B dbexpbuf: Buffer CUA (addr: 0F1800D0, size: 3072000, end: 0F46E0D0)
B dbexpbuf: Buffer OTR (addr: 0F4700D0, size: 4194304, end: 0F8700D0)
M rdisp/reinitialize_code_page -> 0
M icm/accept_remote_trace_level -> 0
M rdisp/no_hooks_for_sqlbreak -> 0
S
S Thu Mar 08 20:24:43 2007
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 086DEAD0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 1FB40098
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 1FB40290
S using messages for server info
S size of spec char cache entry: 165020 bytes (timeout 100 sec)
S size of open spool request entry: 1152 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A PXA: Fragment Size too small: 36 MB, reducing # of fragments
A System page size: 4kb, admin_size: 4576kb.
A Attached to PXA (address 40970040, size 150000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
A ABAP ShmAdm attached (addr=608C5000 leng=20955136 end=61CC1000)
A >> Shm MMADM area (addr=60C2D0C0 leng=134752 end=60C4DF20)
A >> Shm MMDAT area (addr=60C4E000 leng=17248256 end=61CC1000)
A RFC Destination> destination bwserver_C11_30 host bwserver system C11 systnr 30 (bwserver_C11_30)
A RFC Options> H=bwserver,S=30
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 1
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
A Hotpackage version: 9
M ThrCreateShObjects allocated 8352 bytes at 037B0040
N SsfSapSecin: putenv(SECUDIR=C:\usr\sap\C11\DVEBMGS30\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is C:\usr\sap\C11\SYS\exe\run\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
W =================================================
W === ipl_Init() called
B dbtran INFO (init_connection '<DEFAULT>' [ORACLE:640.00]):
B max_blocking_factor = 15, max_in_blocking_factor = 5,
B min_blocking_factor = 10, min_in_blocking_factor = 5,
B prefer_union_all = 0, prefer_union_for_select_all = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 1,
B convert AVG = 0, alias table FUPD = 0,
B escape_as_literal = 1, opt GE LE to BETWEEN = 0,
B select * =0x0f, character encoding =SBCS / <none>:-,
B use_hints = abap->1, dbif->0x1, upto->2147483647, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 1
W ITS Plugin: Release: 640, [6400.0.43.20020600]
W ITS Plugin: Int.version, [31]
W ITS Plugin: Feature set: [3]
W ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
M MBUF info for hooks: MS component UP
M ThSetEnqName: set enqname by server list
M ThISetEnqname: enq name = >bwserver_C11_30 <
E
E *************** EnqId_EN_ActionAtMsUpHook ***************
E Hook on upcoming Ms (with EnqSrv), get auth EnqId and check it locally
E
E Thu Mar 08 20:24:44 2007
E Enqueue Info: enque/disable_replication = 2
E Enqueue Info: replication disabled
E
E *************** ObjShMem_CheckAuthoritativeEnqId ***************
E Checking authoritative EnqId from EnqSrv into ObjShMem
E ObjShMem_CheckAuthoritativeEnqId: ObjShMem ...
E EnqId.EnqTabCreaTime = -999
E EnqId.RandomNumber = -999
E ReqOrd.TimeInSecs = -999
E ReqOrd.ReqNumberThisSec = -999
E ObjShMem_CheckAuthoritativeEnqId: ObjShMem ...
E EnqId.EnqTabCreaTime = -999
E EnqId.RandomNumber = -999
E ReqOrd.TimeInSecs = -999
E ReqOrd.ReqNumberThisSec = -999
E ObjShMem_CheckAuthoritativeEnqId: EnqId is initial in ShMem
E ObjShMem_CheckAuthoritativeEnqId: Overwrite incoming auth EnqId, continue
E EnqId inscribed into initial ObjShMem: (ObjShMem_CheckAuthoritativeEnqId)
E -SHMEM--
E EnqId: EnqTabCreaTime/RandomNumber = 08.03.2007 20:24:44 1173407084 / 2704
E ReqOrd at Srv: TimeInSecs/ReqNumberThisSec = 08.03.2007 20:24:44 1173407084 / 2
E ReqOrd at Cli: TimeInSecs/ReqNumberThisSec = 08.03.2007 20:24:44 1173407084 / 1
E Status: STATUS_OK
E -
M
M Thu Mar 08 20:24:45 2007
M ThActivateServer: state = STARTING
L Begin of BtcSysStartRaise
L Raise event SAP_SYSTEM_START with parameter <bwserver_C11_30 >
L End of BtcSysStartRaise
C
C Thu Mar 08 20:24:46 2007
C User requested cancel of current SQL on connection 0
M program canceled
M reason = soft cancel
M user = SAPSYS
M client = 000
M terminal = 169.254.25.129
M report =
C
C Thu Mar 08 20:24:51 2007
C User requested cancel of current SQL on connection 0
M program canceled
M reason = soft cancel
M user = SAPSYS
M client = 000
M terminal = 169.254.25.129
M report =
M
M Thu Mar 08 20:24:52 2007
M in_ThErrHandle: 1
M ThSoftCancel: no login (step 4, th_errno 50, action 1, level 1)
M Entering ThSetStatError
M ThCallHooks: call hook >ASTAT-collect commit handling< for event BEFORE_ROLLBACK
M ThCallHooks: call hook >SpoolHandleHook< for event BEFORE_ROLLBACK
M ThCallHooks: call hook >ThNoResetMutex< for event AFTER_ROLLBACK
M ThCallHooks: call hook >rsts_after_rollback< for event AFTER_ROLLBACK
M ThCallHooks: call hook >ThNoClearPrevErr< for event AFTER_ROLLBACK
M ThCallHooks: call hook >SpoolHandleHook< for event AFTER_ROLLBACK
M ThCallHooks: call hook >ab_SosShmBeforeCommit< for event BEFORE_COMMIT
M ThCallHooks: call hook >ASTAT-collect commit handling< for event BEFORE_COMMIT
M ThCallHooks: call hook >rsts_before_commit< for event BEFORE_COMMIT
M ThCallHooks: call hook >rsts_after_commit< for event AFTER_COMMIT
M ThCallHooks: call hook >ThNoClearPrevErr< for event AFTER_COMMIT
M ThCallHooks: call hook >SpoolHandleHook< for event AFTER_COMMIT
M ThCallHooks: call hook >rsts_storage_free< for event AFTER_STORAGE_FREE
M ThCallHooks: call hook >db_x_short_mem_sync_point< for event AFTER_STORAGE_FREE
M ThIErrHandle: Entering ThErrHdlUser
I MPI<6>3#105 Peak buffer usage: 4 (@ 64 KB)
M ThCallHooks: call hook >ITSP: EndOfSession< for event BEFORE_SESSION_END
M ThCallHooks: call hook >HttpClearSession< for event BEFORE_SESSION_END
M ThCallHooks: call hook >DbgBeforeSessionEnd< for event BEFORE_SESSION_END
M ThCallHooks: call hook >RtmClearSession< for event BEFORE_SESSION_END
M ThCallHooks: call hook >SpoolHandleHook< for event BEFORE_SESSION_END
M ThCallHooks: call hook >ab_SosShmBeforeCommit< for event BEFORE_COMMIT
M ThCallHooks: call hook >ASTAT-collect commit handling< for event BEFORE_COMMIT
M ThCallHooks: call hook >rsts_before_commit< for event BEFORE_COMMIT
M ThCallHooks: call hook >rsts_after_commit< for event AFTER_COMMIT
M ThCallHooks: call hook >ThNoClearPrevErr< for event AFTER_COMMIT
M ThCallHooks: call hook >SpoolHandleHook< for event AFTER_COMMIT
M ThCallHooks: call hook >rsts_storage_free< for event AFTER_STORAGE_FREE
M ThCallHooks: call hook >db_x_short_mem_sync_point< for event AFTER_STORAGE_FREE
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_TASK_SWITCH
M ThCallHooks: call hook >ImcResetPtr< for event BEFORE_TASK_SWITCH
M ThCallHooks: call hook >DbgBeforeTaskSwitch< for event BEFORE_TASK_SWITCH
M ThCallHooks: call hook >HttpResetPtr< for event BEFORE_TASK_SWITCH
M
M Thu Mar 08 20:42:56 2007
M in_ThErrHandle: 1
M ThIErrHandle: new stat of W0 is WP_SHUTDOWN
M ThIErrHandle: I'm during shutdown
M PfStatDisconnect: disconnect statistics
M Entering ThSetStatError
M ThIErrHandle: don't try rollback again
M ThIErrHandle: normal shutdown
M ThExecShutDown
M ThCheckComOrRb (event=1, full_commit=1)
M ThCallHooks: call hook >ASTAT-collect commit handling< for event BEFORE_COMMIT
M ThCallHooks: call hook >rsts_before_commit< for event BEFORE_COMMIT
M SosSearchAnchor: search anchor for 10
M SosSearchAnchor: invalid tid/mode T-1/M255
M ThCheckComOrRb (event=3, full_commit=1)
M ThCallHooks: call hook >rsts_after_commit< for event AFTER_COMMIT
M SosSearchAnchor: search anchor for 10
M SosSearchAnchor: invalid tid/mode T-1/M255
M ThCallHooks: call hook >ThNoClearPrevErr< for event AFTER_COMMIT
M ThNoClearPrevErr: clear prev no err
M ThCallHooks: call hook >SpoolHandleHook< for event AFTER_COMMIT
M SosSearchAnchor: search anchor for 2
M SosSearchAnchor: invalid tid/mode T-1/M255
M ThUsrDelEntry (*, *, bwserver_C11_30 ) o.k.
M ThICommit3: full commit, set time, keep resources, redispatch
M ThICommit3: commit and keep resources
M ThCheckComOrRb (event=1, full_commit=0)
M ThCallHooks: call hook >ASTAT-collect commit handling< for event BEFORE_COMMIT
M ThCallHooks: call hook >rsts_before_commit< for event BEFORE_COMMIT
M SosSearchAnchor: search anchor for 10
M SosSearchAnchor: invalid tid/mode T-1/M255
M ThCheckComOrRb (event=3, full_commit=0)
M ThCallHooks: call hook >rsts_after_commit< for event AFTER_COMMIT
M SosSearchAnchor: search anchor for 10
M SosSearchAnchor: invalid tid/mode T-1/M255
M ThCallHooks: call hook >ThNoClearPrevErr< for event AFTER_COMMIT
M ThNoClearPrevErr: clear prev no err
M ThCallHooks: call hook >SpoolHandleHook< for event AFTER_COMMIT
M SosSearchAnchor: search anchor for 2
M SosSearchAnchor: invalid tid/mode T-1/M255
M ThAlarm: set alarm to 600 sec
M ThICommit3 o.k.
M ThExecShutDown: ThUsrDelEntry o.k.
M ThExecShutDown: rsau_log_system_stop o.k.
M PfStatIndInit: Initializing Index-Record
M PfWriteIntoFile: copied shared buf (0 bytes) to local buf
M PfTimeFactor: new value: -21600
M Entering ThReadDetachMode
M call ThrShutDown (1)...
B Disconnecting from ALL connections:
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 INACTIVE NO YES NO 000 255 255 20070308 202404 BWSERVER
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=03F0325C,usrhp=03F0C60C)
C Detaching from DB Server (con_hdl=0,svchp=03F0325C,srvhp=03F03E34)
C Now I'm disconnected from ORACLE
B Disconnected from connection 0
B statistics db_con_commit (com_total=95, com_tx=20)
B statistics db_con_rollback (roll_total=1, roll_tx=0)
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2704) [dpnttool.c 357]
Message server (msg_server.exe) and IGS Watchdog (Igswd.exe) are running ok and green.
C Thu Mar 08 20:24:46 2007
C User requested cancel of current SQL on connection
0
M program canceled
M reason = soft cancel
M user = SAPSYS
M client = 000
M terminal = 169.254.25.129
M report =
Do you have DHCP activated on that server? The network issue seems to be the reason for the system not to come up. That IP is the "automatic IP" windows assigns to an interface if you activate DHCP and the system can´t find an DHCP server.
I suggest the following:
- reconfigure your network and give the system a valid IP
- add that IP to your hosts file
- restart the system
Additionally I would recommend updating to a recent kernel (you´re on patch 45 which is rather old, actual would be patchlevel 173).
--
Markus
Well the latest Kernel 6.40 32-bit (Windows server on IA32 32 BIT) updates i could see available on Marketplace for NW04 are sapexe_155-20000182.SAR and sapexedb_155-20000185.sar released date 09-11-2006. I unsared both and put files in exe\run folder again after bringing the system back into its original form (had mirrored copy). Now disp+work says "Running but dialog queue info unavailable". i can log on to the system though thru my client.
Also server and client are behind a DLink router on the same subnet and dhcp is enabled on the router. Thing is dispatcher was all ok and green before kernel updates and problem arises after the update. Network configuration is still all the same before and after the update. Nevertheless i updated the host file with the private ip adddress of my server as suggested.
Here is the file dev_w0 file :
trc file: "dev_w0", trc level: 1, release: "640"
-
*
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
*
B
B Sun Mar 11 00:21:22 2007
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\C11\SYS\exe\run\dboraslib.dll' ...
B Library 'C:\usr\sap\C11\SYS\exe\run\dboraslib.dll' loaded
B Version of 'C:\usr\sap\C11\SYS\exe\run\dboraslib.dll' is "640.00", patchlevel (0.142)
B New connection 0 created
M sysno 30
M sid C11
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 155
M intno 20020600
M make: multithreaded, ASCII
M pid 2524
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2524) [dpxxdisp.c 1160]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpShMCreate: sizeof(wp_adm) 6624 (828)
M DpShMCreate: sizeof(tm_adm) 2379840 (11840)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 192000 (384)
M DpShMCreate: sizeof(vmc_adm) 0 (364)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 06C20040, size: 2665456)
M DpShMCreate: allocated sys_adm at 06C20040
M DpShMCreate: allocated wp_adm at 06C217D8
M DpShMCreate: allocated tm_adm_list at 06C231B8
M DpShMCreate: allocated tm_adm at 06C231E0
M DpShMCreate: allocated wp_ca_adm at 06E68220
M DpShMCreate: allocated appc_ca_adm at 06E6C870
M DpShMCreate: allocated comm_adm_list at 06E6DFE0
M DpShMCreate: allocated comm_adm at 06E6DFF8
M DpShMCreate: allocated vmc_adm_list at 06E9CDF8
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 06E9CE20
M DpShMCreate: allocated wall_adm at 06E9CE28
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Sun Mar 11 00:21:23 2007
M calling db_connect ...
C Prepending C:\oracle\C11\920 to Path.
C got NLS_LANG='AMERICAN_AMERICA.WE8DEC' from environment
C
C Sun Mar 11 00:21:24 2007
C Client NLS settings: AMERICAN_AMERICA.WE8DEC
C Logon as OPS$-user to get SAPC11's password
C Connecting as /@C11 on connection 0 (nls_hdl 0) ... (dbsl 640 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 WE8DEC 1 04C00B58 093050E4 09304B88
C Attaching to DB Server C11 (con_hdl=0,svchp=09304ADC,svrhp=04C05134)
C
C Sun Mar 11 00:21:52 2007
C Starting user session (con_hdl=0,svchp=09304ADC,srvhp=04C05134,usrhp=04C0D90C)
C Now '/@C11' is connected (con_hdl 0, nls_hdl 0).
C Got SAPC11's password from OPS$-user
C Disconnecting from connection 0 ...
C Close user session (con_hdl=0,svchp=09304ADC,usrhp=04C0D90C)
C Now I'm disconnected from ORACLE
C Connecting as SAPC11/<pwd>@C11 on connection 0 (nls_hdl 0) ... (dbsl 640 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 WE8DEC 1 04C00B58 093050E4 09304B88
C Starting user session (con_hdl=0,svchp=09304ADC,srvhp=04C05134,usrhp=04C0D90C)
C Now 'SAPC11/<pwd>@C11' is connected (con_hdl 0, nls_hdl 0).
C Database NLS settings: AMERICAN_AMERICA.WE8DEC
C Database instance c11 is running on BWSERVER with ORACLE version 9.2.0.4.0 since 20070311
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20070311 002123 BWSERVER
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 09640040, size: 4400000)
M SHM_ROLL_AREA (addr: 30940040, size: 268435456)
M SHM_PAGING_AREA (addr: 103E0040, size: 134217728)
M SHM_ROLL_ADM (addr: 09A80040, size: 2678942)
M SHM_PAGING_ADM (addr: 09D10040, size: 525344)
M ThCreateNoBuffer allocated 324144 bytes for 1000 entries at 09DA0040
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 7424 bytes (50 server) at 003F0040
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation flat
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 8, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 0D0C00C8, size: 30000000, end: 0ED5C448)
B dbtbxbuf: Buffer TABLP (addr: 0ED600C8, size: 10240000, end: 0F7240C8)
B dbexpbuf: Buffer EIBUF (addr: 0F7300D0, size: 4194304, end: 0FB300D0)
B dbexpbuf: Buffer ESM (addr: 0FB400D0, size: 4194304, end: 0FF400D0)
B dbexpbuf: Buffer CUA (addr: 183F00D0, size: 3072000, end: 186DE0D0)
B dbexpbuf: Buffer OTR (addr: 186E00D0, size: 4194304, end: 18AE00D0)
M rdisp/reinitialize_code_page -> 0
M icm/accept_remote_trace_level -> 0
M rdisp/no_hooks_for_sqlbreak -> 0
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 09441BF0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 209D0098
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 209D0290
S using messages for server info
S size of spec char cache entry: 165020 bytes (timeout 100 sec)
S size of open spool request entry: 1152 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A System page size: 4kb, total admin_size: 4544kb, dir_size: 4520kb.
A Attached to PXA (address 40970040, size 150000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
A ABAP ShmAdm attached (addr=608C5000 leng=20955136 end=61CC1000)
A >> Shm MMADM area (addr=60C2D0C0 leng=134752 end=60C4DF20)
A >> Shm MMDAT area (addr=60C4E000 leng=17248256 end=61CC1000)
A RFC Destination> destination bwserver_C11_30 host bwserver system C11 systnr 30 (bwserver_C11_30)
A RFC Options> H=bwserver,S=30,d=1
B table logging switched off for all clients
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 1
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC abap/SIGCHILD_default not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
A Hotpackage version: 9
M ThrCreateShObjects allocated 8352 bytes at 0FFD0040
N SsfSapSecin: putenv(SECUDIR=C:\usr\sap\C11\DVEBMGS30\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is C:\usr\sap\C11\SYS\exe\run\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
W =================================================
W === ipl_Init() called
B dbtran INFO (init_connection '<DEFAULT>' [ORACLE:640.00]):
B max_blocking_factor = 5, max_in_blocking_factor = 5,
B min_blocking_factor = 5, min_in_blocking_factor = 5,
B prefer_union_all = 0, prefer_union_for_select_all = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 1,
B convert AVG = 0, alias table FUPD = 0,
B escape_as_literal = 1, opt GE LE to BETWEEN = 0,
B select * =0x0f, character encoding =SBCS / <none>:-,
B use_hints = abap->1, dbif->0x1, upto->2147483647, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 1
W ITS Plugin: Release: 640, [6400.0.155.20020600]
W ITS Plugin: Int.version, [31]
W ITS Plugin: Feature set: [13]
W ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
E Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume bwserver_C11_30
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M MBUF info for hooks: MS component UP
M ThSetEnqName: set enqname by server list
M ThISetEnqname: enq name = >bwserver_C11_30 <
E
E *************** EnqId_EN_ActionAtMsUpHook ***************
E Hook on upcoming Ms (with EnqSrv), get auth EnqId and check it locally
E
E *************** ObjShMem_CheckAuthoritativeEnqId ***************
E Checking authoritative EnqId from EnqSrv into ObjShMem
E ObjShMem_CheckAuthoritativeEnqId: ObjShMem ...
E EnqId.EnqTabCreaTime = -999
E EnqId.RandomNumber = -999
E ReqOrd.TimeInSecs = -999
E ReqOrd.ReqNumberThisSec = -999
E ObjShMem_CheckAuthoritativeEnqId: ObjShMem ...
E EnqId.EnqTabCreaTime = -999
E EnqId.RandomNumber = -999
E ReqOrd.TimeInSecs = -999
E ReqOrd.ReqNumberThisSec = -999
E ObjShMem_CheckAuthoritativeEnqId: EnqId is initial in ShMem
E ObjShMem_CheckAuthoritativeEnqId: Overwrite incoming auth EnqId, continue
E EnqId inscribed into initial ObjShMem: (ObjShMem_CheckAuthoritativeEnqId)
E -SHMEM--
E EnqId: EnqTabCreaTime/RandomNumber = 11.03.2007 00:21:36 1173594096 / 2548
E ReqOrd at Srv: TimeInSecs/ReqNumberThisSec = 11.03.2007 00:21:52 1173594112 / 1
E ReqOrd at Cli: TimeInSecs/ReqNumberThisSec = 11.03.2007 00:21:52 1173594112 / 1
E Status: STATUS_OK
E -
M
M Sun Mar 11 00:21:53 2007
M ThActivateServer: state = STARTING
L BtcSysStartRaise: Begin
L Raise event SAP_SYSTEM_START with parameter <bwserver_C11_30 >
L BtcSysStartRaise: End
I
I Sun Mar 11 00:21:55 2007
I MPI<c>9#3 Peak buffer usage: 5 (@ 64 KB)
M
M Sun Mar 11 00:21:56 2007
M SecAudit(RsauShmInit): WP attached to existing shared memory.
M SecAudit(RsauShmInit): addr of SCSA........... = 00230040
M SecAudit(RsauShmInit): addr of RSAUSHM........ = 00230490
M SecAudit(RsauShmInit): addr of RSAUSLOTINFO... = 002304C8
M SecAudit(RsauShmInit): addr of RSAUSLOTS...... = 002304D4
N
N Sun Mar 11 00:33:28 2007
N login/password_change_for_SSO : 1 -> 1
B
B Sun Mar 11 00:33:37 2007
B dbmyclu : info : my major identification is 3925744001, minor one 30.
B dbmyclu : info : Time Reference is 1.12.2001 00:00:00h GMT.
B dbmyclu : info : my uuid is 5ABBF7102B32B849875E52436E6B3F56.
B dbmyclu : info : current optimistic cluster level: 0
B dbmyclu : info : pessimistic reads set to 2.
M
M Sun Mar 11 00:56:13 2007
M in_ThErrHandle: 1
M ThIErrHandle: new stat of W0 is WP_SHUTDOWN
M ThIErrHandle: I'm during shutdown
M PfStatDisconnect: disconnect statistics
M Entering ThSetStatError
M ThIErrHandle: don't try rollback again
M ThShutDownServer: shutdown server
M PfStatIndInit: Initializing Index-Record
M PfWriteIntoFile: copied shared buf (0 bytes) to local buf
M PfTimeFactor: new value: -21600
M Entering ThReadDetachMode
M call ThrShutDown (1)...
B Disconnecting from ALL connections:
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 INACTIVE NO YES NO 000 255 255 20070311 002123 BWSERVER
C Disconnecting from connection 0 ...
C Close user session (con_hdl=0,svchp=09304ADC,usrhp=04C0D90C)
C Detaching from DB Server (con_hdl=0,svchp=09304ADC,srvhp=04C05134)
C Now I'm disconnected from ORACLE
B Disconnected from connection 0
B statistics db_con_commit (com_total=225, com_tx=44)
B statistics db_con_rollback (roll_total=0, roll_tx=0)
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2524) [dpnttool.c 357]
thanks.
Manish
User | Count |
---|---|
76 | |
9 | |
8 | |
7 | |
6 | |
5 | |
5 | |
5 | |
5 | |
5 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.