on 08-10-2013 8:31 AM
Hi All,
When I am trying to connect my LDAP to SAP GRC system, I am getting a connection error mentioned below.
Message no. LDAPRC091
The SM59 connector is working fine and is showing a green light in LDAP-> LDAP Connectors. But when i try to log on to the LDAP server i get the connection error. I have done all the configuration as per the AC10 LDAP Config guide.
When I checked the trace for this connector in ST11 i got the below error. Please help.
[Thu Aug 8 11:16:46 2013] (mainU, 641)
*** ERROR ***
main thread (handle 1) ends due to RFC return code 6
[Thu Aug 8 11:16:46 2013] (OutputRfcErrorInfo, 163)
*** ERROR ***
Trying to get error information from RFC:
[Thu Aug 8 11:16:46 2013] (OutputRfcErrorInfo, 184)
*** ERROR ***
RFC error in function "RfcDispatch":
Key : RFC_ERROR_CANCELLED
Message: CPIC-CALL: 'SAP_CMACCPTP' : cmRc=18
LOCATION CPIC (TCP/IP) on local host GRC-DEV with Unicode
ERROR connection canceled manually
TIME Thu Aug 8 11:16:46 2013
RELEASE 720
COMPONENT CPIC (TCP/IP) with Unicode
VERSION 3
RC 474
MODULE r3cpic.c
LINE 13727
COUNTER 2
[Thu Aug 8 11:16:49 2013]
SAP LDAP Connector, (c) 1999-2005 SAP AG, Walldorf, Germany
(for help, call with command line parameter "-help")
============================================================
Hi Prashant
You need to make sure that you register the LDAP server program on the gateway. Also make sure that the LDAP connector is the same name as the RFC destination in LDAP tcode.
Please refer to Sap note 353597 - Registering RFC server programs.
Thanks
Anthony
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hello,
So it seems there is some problem in the RFC destination configuration.
Please check it in transaction SM59. Follow instructions from this link:
http://help.sap.com/saphelp_nw04s/helpdata/en/
10/1a063715c611d4b61f0000e835363f/frameset.htm
Best Regards,
Yong Luo
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Yong,
Thanks for your reply.
I did all the configuration as per the AC 10.0 LDAP config document.
Please note that the ST11 log says that simple bind failed. I am attaching the error line below.
Slot 0 (): <<< ldap_simple_bind_sU() == 91 := failed
Please let me know what could be the issue for this failure.
Regards,
Prashant
Hi Singh
Kindly refer the SAP Note as mention below error message
RFC error in function "RfcDispatch":
Key : RFC_ERROR_CANCELLED
Message: CPIC-CALL: 'SAP_CMACCPTP' : cmRc=18
Note 1451598 - LDAP Connector on HP-UX terminates abnormally and dumps core
Thanks
Sriram
Hi Sandeep,
Thanks for your reply.
I did the connection test on the connectors SLD_NUC and SLD_UC but got the error that the program id is not registered. Please let me know do I need to register the the program id on SAP gateway for these connectors?
Below is the error log:
Logon | Connection Error |
Error Details | Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=67 |
Error Details | ERROR: program SLD_NUC not registered |
Error Details | LOCATION: SAP-Gateway on host GRC-DEV / sapgw01 |
Error Details | DETAIL: TP SLD_NUC not registered |
Error Details | COMPONENT: SAP-Gateway |
Error Details | COUNTER: 592 |
Error Details | MODULE: gwr3cpic.c |
Error Details | LINE: 1833 |
Error Details | RETURN CODE: 679 |
Error Details | SUBRC: 0 |
Error Details | RELEASE: 720 |
Error Details | TIME: Mon Aug 12 09:45:36 2013 |
Error Details | VERSION: 2 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Prashant,
it says the ERROR: program SLD_NUC not registered
Go to sm59>>TCP/IP>> SLDUC OR SLDNUC>> TECHNICAL SETTINGS TAB.
There please make sure that you are maintaining the PROGRAM ID and GATEWAY OPTIONS
If there is no program id>> we should maintain it.
usually it is rfc name itself.
Regards,
Nag
Hi Sandeep,
Yes, the program id and is maintained in these connectors and with same as rfc name.
Also, ST11 log says that simple bind failed. I am attaching the error line below.
Slot 0 (): <<< ldap_simple_bind_sU() == 91 := failed
Please let me know what could be the issue for this failure.
Regards,
Prashant
Hi Prashant,
Apart from the LDAP rfc connections, please make sure the SLDUC and SLDNUC rfc connections are working fine.
goto transaction SM59>> TCP/IP >> SLDUC>>CONNECTION TEST.
Regards,
Nag
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
93 | |
10 | |
10 | |
9 | |
9 | |
7 | |
6 | |
5 | |
5 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.