on 07-21-2013 5:41 PM
Hi All,
I am facing a problem. The dispatcher got stopped. If I am restarting the instance, then dispatcher is getting started but after sometime its going down again.
Please, help me out.
This is my dev_disp trace file:
---------------------------------------------------
trc file: "dev_disp", trc level: 1, release: "720"
---------------------------------------------------
sysno 00
sid E6T
systemid 562 (PC with Windows NT)
relno 7200
patchlevel 0
patchno 100
intno 20020600
make multithreaded, Unicode, 64 bit, optimized
profile \\ae6tdb\sapmnt\E6T\SYS\profile\E6T_DVEBMGS00_ae6tdb
pid 2100
kernel runs with dp version 131000(ext=118000) (@(#) DPLIB-INT-VERSION-131000-UC)
length of sys_adm_ext is 588 bytes
*** SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 2100) [dpxxdisp.c 1287]
shared lib "dw_xml.dll" version 100 successfully loaded
shared lib "dw_xtc.dll" version 100 successfully loaded
shared lib "dw_stl.dll" version 100 successfully loaded
shared lib "dw_gui.dll" version 100 successfully loaded
shared lib "dw_mdm.dll" version 100 successfully loaded
shared lib "dw_rndrt.dll" version 100 successfully loaded
shared lib "dw_abp.dll" version 100 successfully loaded
shared lib "dw_sym.dll" version 100 successfully loaded
shared lib "dw_aci.dll" version 100 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
rdisp/dynamic_wp_check : 1
rdisp/calculateLoadAverage : 1
Fri Jul 19 16:39:04 2013
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 6404]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: write dp-profile-values into sys_adm_ext
DpIPCInit2: start server >ae6tdb_E6T_00 <
DpShMCreate: sizeof(wp_adm) 31696 (2264)
DpShMCreate: sizeof(tm_adm) 5517056 (27448)
DpShMCreate: sizeof(wp_ca_adm) 64000 (64)
DpShMCreate: sizeof(appc_ca_adm) 64000 (64)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/584064/584080
DpShMCreate: sizeof(comm_adm) 584080 (1144)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (80)
DpShMCreate: sizeof(vmc_adm) 0 (2152)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: sizeof(j2ee_adm) 3952
DpShMCreate: SHM_DP_ADM_KEY (addr: 00000000035A0050, size: 6357408)
DpShMCreate: allocated sys_adm at 00000000035A0060
DpShMCreate: allocated wp_adm_list at 00000000035A3040
DpShMCreate: allocated wp_adm at 00000000035A3230
DpShMCreate: allocated tm_adm_list at 00000000035AAE10
DpShMCreate: allocated tm_adm at 00000000035AAE60
DpShMCreate: allocated wp_ca_adm at 0000000003AEDD70
DpShMCreate: allocated appc_ca_adm at 0000000003AFD780
DpShMCreate: allocated comm_adm at 0000000003B0D190
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0000000003B9BB30
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated gw_adm at 0000000003B9BBE0
DpShMCreate: allocated j2ee_adm at 0000000003B9BC20
DpShMCreate: allocated ca_info at 0000000003B9CBA0
DpShMCreate: allocated wall_adm at 0000000003B9CC30
DpCommAttachTable: attached comm table (header=0000000003B0D190/ft=0000000003B0D1A0)
DpSysAdmIntInit: initialize sys_adm
rdisp/test_roll : roll strategy is DP_NORMAL_ROLL
dia token check not active (5 token)
MBUF state OFF
DpCommInitTable: init table for 500 entries
DpRqQInit: keep protect_queue / slots_per_queue 0 / 2001 in sys_adm
rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
<ES> Info: em/initial_size_MB( 3838MB) not multiple of em/blocksize_KB( 4096KB)
<ES> Info: em/initial_size_MB rounded up to 3840MB
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 959 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE
MPI: dynamic quotas disabled.
MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 4.0.1 4.0.1 5.1) [dpxxdisp.c 1673]
***LOG Q0K=> DpMsAttach, mscon ( ae6tdb) [dpxxdisp.c 12339]
MBUF state LOADING
DpStartStopMsg: send start message (myname is >ae6tdb_E6T_00 <)
DpStartStopMsg: start msg sent
CCMS uses Shared Memory Key 73 for monitoring.
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalized shared memory of size 60000000 for monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
CCMS: AlMsUpload called by wp 1024.
Fri Jul 19 16:39:06 2013
CCMS: AlMsUpload successful for D:\usr\sap\E6T\DVEBMGS00\log\ALMTTREE.DAT (3537 MTEs).
Fri Jul 19 16:39:07 2013
CCMS: start to initalize 3.X shared alert area (first segment).
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1296]
MBUF state ACTIVE
DpWpBlksLow: max wp blocks in queue is 800 (80 %)
MBUF component UP
DpMsgProcess: 1 server in MBUF
DpAppcBlksLow: max appc blocks in queue is 500 (50 %)
Fri Jul 19 16:39:21 2013
DpModState: change server state from STARTING to ACTIVE
Fri Jul 19 16:41:55 2013
***LOG Q1O=> DpWpConf, WP Conf () [dpxxdisp.c 14526]
DpWpConf: change reqtype of W7 from BTC to DIA
***LOG Q0V=> DpWpConf, mod_req ( 7BTCDIA) [dpxxdisp.c 15110]
DpAdaptWppriv_max_no : 1 -> 1
Fri Jul 19 23:00:25 2013
***LOG Q1O=> DpWpConf, WP Conf () [dpxxdisp.c 14526]
DpWpConf: change reqtype of W7 from DIA to BTC
***LOG Q0V=> DpWpConf, mod_req ( 7DIABTC) [dpxxdisp.c 15110]
DpWpConf: change reqtype of W4 from DIA to BTC
***LOG Q0V=> DpWpConf, mod_req ( 4DIABTC) [dpxxdisp.c 15110]
DpWpConf: change reqtype of W3 from DIA to BTC
***LOG Q0V=> DpWpConf, mod_req ( 3DIABTC) [dpxxdisp.c 15110]
DpAdaptWppriv_max_no : 1 -> 1
Sat Jul 20 09:00:25 2013
***LOG Q1O=> DpWpConf, WP Conf () [dpxxdisp.c 14526]
DpWpConf: change reqtype of W9 from BTC to DIA
***LOG Q0V=> DpWpConf, mod_req ( 9BTCDIA) [dpxxdisp.c 15110]
DpWpConf: change reqtype of W8 from BTC to DIA
***LOG Q0V=> DpWpConf, mod_req ( 8BTCDIA) [dpxxdisp.c 15110]
DpWpConf: change reqtype of W7 from BTC to DIA
***LOG Q0V=> DpWpConf, mod_req ( 7BTCDIA) [dpxxdisp.c 15110]
DpAdaptWppriv_max_no : 1 -> 1
Sat Jul 20 23:00:25 2013
***LOG Q1O=> DpWpConf, WP Conf () [dpxxdisp.c 14526]
DpWpConf: change reqtype of W9 from DIA to BTC
***LOG Q0V=> DpWpConf, mod_req ( 9DIABTC) [dpxxdisp.c 15110]
DpWpConf: change reqtype of W7 from DIA to BTC
***LOG Q0V=> DpWpConf, mod_req ( 7DIABTC) [dpxxdisp.c 15110]
DpWpConf: change reqtype of W2 from DIA to BTC
***LOG Q0V=> DpWpConf, mod_req ( 2DIABTC) [dpxxdisp.c 15110]
DpAdaptWppriv_max_no : 1 -> 1
Sun Jul 21 09:00:25 2013
***LOG Q1O=> DpWpConf, WP Conf () [dpxxdisp.c 14526]
DpWpConf: change reqtype of W9 from BTC to DIA
***LOG Q0V=> DpWpConf, mod_req ( 9BTCDIA) [dpxxdisp.c 15110]
DpWpConf: change reqtype of W7 from BTC to DIA
***LOG Q0V=> DpWpConf, mod_req ( 7BTCDIA) [dpxxdisp.c 15110]
DpWpConf: change reqtype of W4 from BTC to DIA
***LOG Q0V=> DpWpConf, mod_req ( 4BTCDIA) [dpxxdisp.c 15110]
DpAdaptWppriv_max_no : 1 -> 1
------------------ C-STACK ----------------------
Hello
4 ETW000 [ dev trc,00000] ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2292]
4 ETW000 54685 0.059018
4 ETW000 [ dev trc,00000] (18452) [28000] [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed. The login is from an untrusted domain and cannot be used with Windows authentication.
4 ETW000 39 0.059057
The problem is connection to the database.
Did you make any changes to the hosts file ?
Regards
RB
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi,
Please try to start your system with a correct domain account.
Then this should work.
Also, check this http://support.microsoft.com/kb/555332
Regards,
Divyanshu
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Sudhir,
Below thread will solve your issue.
http://scn.sap.com/thread/3299815
Thanks and Regards,
Kunal Gahlot
Hi,
The dispatcher is stopped because all work processes died.
There is nothing done with message server.
In work process trace file, it shows database connection error.
B ***LOG BY2=> sql error 18452 performing CON [dbsh 1246]
B ***LOG BY0=> [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed. The login is from an untrusted domain and cannot be used with Windows authentication. [dbsh 1246]
You need to check if your database server and SAP server are running under the same domain.
If yes, I recommend you try to re-register the server machines to the AD and see how it goes.
Thanks.
Jim
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Can you attach full dev_disp log file?
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi,
Please check following,
1. The database is Up. R3trans -d or R3trans -x
2. Check Log area is not full.
3. Verify your host file entry as Sudhir mentioned.
4. If you have upgraded kernel make sure that files are copied to other directories also.
Regards
Jithin M
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Sudhir,
There is some network issue as dispatcher cannot connect to Message server.
Maintain the host name in host file if not present.
or
take a reboot of the server.
With Regards
Ashutosh Chaturvedi
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi , Sudhir can you plz share the dispatcher stop screen......
Thanks
Nikh
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Sudhir,
As per provided information it seems issue with kernel,please update your kernel.
Pleaase provide the more log , dev_w* dev_ms..
BR
Atul
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Sudhir,
Please check belowloink
http://scn.sap.com/thread/1947840
there is issue with hostname and ip.
as per log your system hostname is
** ERROR => [DpProcDied] Process died (PID:4044 HANDLE:1268 rc:0x0) [dpnttool2.c 147]
DpStartStopMsg: send stop message (myname is >ae6tdb_E6T_00 <)
DpStartStopMsg: Write AD_STARTSTOP message with type= 0, name=ae6tdb_E6T_00 , sapsysnr= 0, hostname=ae6tdb
Please check and correct the entry.
BR
Atul
Hi Atul,
This is my trans.log file.
4 ETW000 R3trans version 6.22 (release 720 - 03.06.11 - 17:57:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 22.07.2013 - 12:49:21
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [ dev trc,00000] Mon Jul 22 12:49:22 2013 92 0.000092
4 ETW000 [ dev trc,00000] db_con_init called 24 0.000116
4 ETW000 [ dev trc,00000] set_use_ext_con_info(): rsdb/ssfs_connect not set => ssfs not used 45 0.000161
4 ETW000 [ dev trc,00000] determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000 26 0.000187
4 ETW000 [ dev trc,00000] create_con (con_name=R/3) 15 0.000202
4 ETW000 [ dbcon.c ,00000] *** ERROR => Invalid profile parameter dbms/type (or environment variable dbms_type) = <undef>, cannot load DB library
4 ETW000 53 0.000255
2EETW169 no connect possible: "connect failed with DBLI_RC_LOAD_LIB_FAILED."
Hi Benjamin,
As you said, I have just executed the R3trans under e6tadm and the output is :
This is my trans.log file below:
4 ETW000 r3trans version 6.22 (release 720 - 03.06.11 - 17:57:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 22.07.2013 - 14:47:03
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -x
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [ dev trc,00000] Mon Jul 22 14:47:04 2013 104 0.000104
4 ETW000 [ dev trc,00000] db_con_init called 38 0.000142
4 ETW000 [ dev trc,00000] set_use_ext_con_info(): rsdb/ssfs_connect not set => ssfs not used 49 0.000191
4 ETW000 [ dev trc,00000] determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000 30 0.000221
4 ETW000 [ dev trc,00000] create_con (con_name=R/3) 18 0.000239
4 ETW000 [ dev trc,00000] Loading DB library 'dbmssslib.dll' ... 45 0.000284
4 ETW000 [ dev trc,00000] DlLoadLib success: LoadLibrary("dbmssslib.dll"), hdl 0, addr 000007FEEDA90000
4 ETW000 1882 0.002166
4 ETW000 [ dev trc,00000] using "D:\usr\sap\E6T\SYS\exe\uc\NTAMD64\dbmssslib.dll" 19 0.002185
4 ETW000 [ dev trc,00000] Library 'dbmssslib.dll' loaded 24 0.002209
4 ETW000 [ dev trc,00000] function DbSlExpFuns loaded from library dbmssslib.dll 21 0.002230
4 ETW000 [ dev trc,00000] Version of 'dbmssslib.dll' is "720.00", patchlevel (0.98) 136 0.002366
4 ETW000 [ dev trc,00000] function dsql_db_init loaded from library dbmssslib.dll 27 0.002393
4 ETW000 [ dev trc,00000] function dbdd_exp_funs loaded from library dbmssslib.dll 20 0.002413
4 ETW000 [ dev trc,00000] New connection 0 created 36 0.002449
4 ETW000 [ dev trc,00000] 0: name = R/3, con_id = -000000001, state = DISCONNECTED, tx = NO , bc = NO , hc = NO , perm = YES, reco = NO , frco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO , prog =
4 ETW000 43 0.002492
4 ETW000 [ dev trc,00000] db_con_connect (con_name=R/3) 21 0.002513
4 ETW000 [ dev trc,00000] determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000 25 0.002538
4 ETW000 [ dev trc,00000] find_con_by_name found the following connection: 17 0.002555
4 ETW000 [ dev trc,00000] 0: name = R/3, con_id = 000000000, state = DISCONNECTED, tx = NO , bc = NO , hc = NO , perm = YES, reco = NO , frco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO , prog =
4 ETW000 35 0.002590
4 ETW000 [ dev trc,00000] Thread ID:6064 978 0.003568
4 ETW000 [ dev trc,00000] Thank You for using the SLODBC-interface 26 0.003594
4 ETW000 [ dev trc,00000] Using dynamic link library 'D:\usr\sap\E6T\SYS\exe\uc\NTAMD64\dbmssslib.dll'
4 ETW000 33 0.003627
4 ETW000 [ dev trc,00000] dbmssslib.dll patch info 43 0.003670
4 ETW000 [ dev trc,00000] SAP patchlevel 0 19 0.003689
4 ETW000 [ dev trc,00000] SAP patchno 100 75 0.003764
4 ETW000 [ dev trc,00000] Last MSSQL DBSL patchlevel 0 26 0.003790
4 ETW000 [ dev trc,00000] Last MSSQL DBSL patchno 98 19 0.003809
4 ETW000 [ dev trc,00000] Last MSSQL DBSL patchcomment Convert RAW input parameters to literals (1611849)
4 ETW000 37 0.003846
4 ETW000 [ dev trc,00000] ODBC Driver chosen: SQL Server Native Client 10.0 native 367 0.004213
4 ETW000 [ dev trc,00000] lpc:(local) connection used on ae6tdb 120 0.004333
4 ETW000 [ dev trc,00000] ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2292]
4 ETW000 54685 0.059018
4 ETW000 [ dev trc,00000] (18452) [28000] [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed. The login is from an untrusted domain and cannot be used with Windows authentication.
4 ETW000 39 0.059057
4 ETW000 [ dev trc,00000] ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2292]
4 ETW000 5816 0.064873
4 ETW000 [ dev trc,00000] (18452) [28000] [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed. The login is from an untrusted domain and cannot be used with Windows authentication.
4 ETW000 53 0.064926
4 ETW000 [ dev trc,00000] ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2292]
4 ETW000 5655 0.070581
4 ETW000 [ dev trc,00000] (18452) [28000] [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed. The login is from an untrusted domain and cannot be used with Windows authentication.
4 ETW000 39 0.070620
4 ETW000 [ dev trc,00000] ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2292]
4 ETW000 6804 0.077424
4 ETW000 [ dev trc,00000] (18452) [28000] [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed. The login is from an untrusted domain and cannot be used with Windows authentication.
4 ETW000 39 0.077463
4 ETW000 [ dev trc,00000] ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2292]
4 ETW000 5622 0.083085
4 ETW000 [ dev trc,00000] (18452) [28000] [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed. The login is from an untrusted domain and cannot be used with Windows authentication.
4 ETW000 40 0.083125
4 ETW000 [ dev trc,00000] ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2292]
4 ETW000 5633 0.088758
4 ETW000 [ dev trc,00000] (18452) [28000] [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed. The login is from an untrusted domain and cannot be used with Windows authentication.
4 ETW000 40 0.088798
4 ETW000 [ dev trc,00000] Connection 0 failed using Driver={SQL Server Native Client 10.0};Server=AE6TDB;AutoTranslate=no;Trusted_Connection=yes;WSID=ae6tdb;APP=R3 00 comm rd ODBC;Database=E6T;
4 ETW000 53 0.088851
4 ETW000 [ dblink ,00000] ***LOG BY2=>sql error 18452 performing CON 321 0.089172
4 ETW000 [ dblink ,00000] ***LOG BY0=>[Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed. The login is from an untrusted domain and cannot be used with Windows authentication.
4 ETW000 43 0.089215
2EETW169 no connect possible: "DBMS = MSSQL --- SERVER = 'AE6TDB' DBNAME = 'E6T'"
User | Count |
---|---|
87 | |
10 | |
10 | |
10 | |
7 | |
6 | |
6 | |
5 | |
5 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.