cancel
Showing results for 
Search instead for 
Did you mean: 

SAP NetWeaver Application Server ABAP 7.03 trial

mahendragulla
Explorer
0 Kudos

Dear friends.

  I am new to Sap. I have installed SAP NetWeaver Application Server ABAP 7.03  trial on windows 7, 64 bit professional. When started server in  SAP management console it became  briefly green and later with in a  minute it turns yellow again. Could you please let me know, How can I solve this problem.

Thanking you.

with best regards,

Mahendra

Accepted Solutions (0)

Answers (2)

Answers (2)

AtulKumarJain
Active Contributor
0 Kudos

Hi Mahendra,

Please attached the screen shot of issue .

Are you still able to logon to sap sysetm.

dev_w*,dev_disp paste the  log

BR

Atul

mahendragulla
Explorer
0 Kudos

Hi Atul,

Thanks very much for the reply.  As I have wrote in my first post, I have installed first time SAP NetWeaver Application Server ABAP 7.03  trial. When started first time by entering password it  turns yellow then briefly green for a minute and turns yellow again. I have already posted dev_w0 in response to Rishi and Here with I am also pasting dev_disp.

Thanking you

regards

Mahendra


---------------------------------------------------
trc file: "dev_disp", trc level: 1, release: "720"
---------------------------------------------------
sysno      00
sid        NSP
systemid   562 (PC with Windows NT)
relno      7200
patchlevel 0
patchno    201
intno      20020600
make       multithreaded, Unicode, 64 bit, optimized
profile    \\SAP\sapmnt\NSP\SYS\profile\NSP_DVEBMGS00_SAP
pid        1620

kernel runs with dp version 133000(ext=118000) (@(#) DPLIB-INT-VERSION-133000-UC)
length of sys_adm_ext is 588 bytes
*** SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 1620) [dpxxdisp.c   1315]
    shared lib "dw_xml.dll" version 201 successfully loaded
    shared lib "dw_xtc.dll" version 201 successfully loaded
    shared lib "dw_stl.dll" version 201 successfully loaded
    shared lib "dw_gui.dll" version 201 successfully loaded
    shared lib "dw_mdm.dll" version 201 successfully loaded
    shared lib "dw_rndrt.dll" version 201 successfully loaded
    shared lib "dw_abp.dll" version 201 successfully loaded
    shared lib "dw_sym.dll" version 201 successfully loaded
    shared lib "dw_aci.dll" version 201 successfully loaded
rdisp/softcancel_sequence :  -> 0,5,-1
use internal message server connection to port 3900
rdisp/dynamic_wp_check : 1
rdisp/calculateLoadAverage : 1

Mon Jul 15 12:14:42 2013
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  6423]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active

Mon Jul 15 12:14:43 2013
DpIPCInit2: write dp-profile-values into sys_adm_ext
DpIPCInit2: start server >SAP_NSP_00                              <
DpShMCreate: sizeof(wp_adm)        31696    (2264)
DpShMCreate: sizeof(tm_adm)        5517056    (27448)
DpShMCreate: sizeof(wp_ca_adm)        64000    (64)
DpShMCreate: sizeof(appc_ca_adm)    64000    (64)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/584064/584080
DpShMCreate: sizeof(comm_adm)        584080    (1144)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)        0    (296)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)        0    (80)
DpShMCreate: sizeof(vmc_adm)        0    (2152)
DpShMCreate: sizeof(wall_adm)        (41664/42896/64/192)
DpShMCreate: sizeof(gw_adm)    48
DpShMCreate: sizeof(j2ee_adm)    3952
DpShMCreate: SHM_DP_ADM_KEY        (addr: 000000000FA10050, size: 6363600)
DpShMCreate: allocated sys_adm at 000000000FA10060
DpShMCreate: allocated wp_adm_list at 000000000FA13070
DpShMCreate: allocated wp_adm at 000000000FA13260
DpShMCreate: allocated tm_adm_list at 000000000FA1AE40
DpShMCreate: allocated tm_adm at 000000000FA1AE90
DpShMCreate: allocated wp_ca_adm at 000000000FF5DDA0
DpShMCreate: allocated appc_ca_adm at 000000000FF6D7B0
DpShMCreate: allocated comm_adm at 000000000FF7D1C0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000001000BB60
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated gw_adm at 000000001000BC10
DpShMCreate: allocated j2ee_adm at 000000001000BC50
DpShMCreate: allocated ca_info at 000000001000CBD0
DpShMCreate: allocated wall_adm at 000000001000CC60
DpCommAttachTable: attached comm table (header=000000000FF7D1C0/ft=000000000FF7D1D0)
DpSysAdmIntInit: initialize sys_adm
rdisp/test_roll : roll strategy is DP_NORMAL_ROLL
dia token check not active (6 token)
MBUF state OFF
DpCommInitTable: init table for 500 entries
DpRqQInit: keep protect_queue / slots_per_queue 0 / 2001 in sys_adm
rdisp/queue_size_check_value :  -> on,50,30,40,500,50,500,80
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> EsILock: use spinlock for locking
<ES> InitFreeList
<ES> block size is 4096 kByte.
<ES> Info: em/initial_size_MB( 4391MB) not multiple of em/blocksize_KB( 4096KB)
<ES> Info: em/initial_size_MB rounded up to 4392MB
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 1097 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE
MPI: dynamic quotas disabled.
MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 4.0.1 4.0.1 5.1) [dpxxdisp.c   1701]

Mon Jul 15 12:14:44 2013
***LOG Q0K=> DpMsAttach, mscon ( SAP) [dpxxdisp.c   12467]
MBUF state LOADING
DpStartStopMsg: send start message (myname is >SAP_NSP_00                              <)
DpStartStopMsg: start msg sent
CCMS uses Shared Memory Key 73 for monitoring.
CCMS: Initalized shared memory of size 60000000 for monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
CCMS: AlMsUpload called by wp 1024.

Mon Jul 15 12:14:45 2013
CCMS: AlMsUpload successful for C:\usr\sap\NSP\DVEBMGS00\log\ALMTTREE.DAT (574 MTEs).
CCMS: start to initalize 3.X shared alert area (first segment).
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1296]
MBUF state ACTIVE
DpWpBlksLow: max wp blocks in queue is 800 (80 %)
MBUF component UP
DpMsgProcess: 1 server in MBUF
DpAppcBlksLow: max appc blocks in queue is 500 (50 %)

Mon Jul 15 12:15:24 2013
*** ERROR => DpHdlDeadWp: W0 (pid 2520) died (severity=0, status=0) [dpxxwp.c     1531]
*** ERROR => DpHdlDeadWp: W1 (pid 2668) died (severity=0, status=0) [dpxxwp.c     1531]
*** ERROR => DpHdlDeadWp: W2 (pid 896) died (severity=0, status=0) [dpxxwp.c     1531]
*** ERROR => DpHdlDeadWp: W3 (pid 2752) died (severity=0, status=0) [dpxxwp.c     1531]
*** ERROR => DpHdlDeadWp: W4 (pid 1576) died (severity=0, status=0) [dpxxwp.c     1531]
*** ERROR => DpHdlDeadWp: W5 (pid 1944) died (severity=0, status=0) [dpxxwp.c     1531]
*** ERROR => DpHdlDeadWp: W6 (pid 160) died (severity=0, status=0) [dpxxwp.c     1531]
*** ERROR => DpHdlDeadWp: W7 (pid 2416) died (severity=0, status=0) [dpxxwp.c     1531]
*** ERROR => DpHdlDeadWp: W8 (pid 2596) died (severity=0, status=0) [dpxxwp.c     1531]
*** ERROR => DpHdlDeadWp: W9 (pid 2480) died (severity=0, status=0) [dpxxwp.c     1531]
*** ERROR => DpHdlDeadWp: W10 (pid 968) died (severity=0, status=0) [dpxxwp.c     1531]
*** ERROR => DpHdlDeadWp: W11 (pid 1876) died (severity=0, status=0) [dpxxwp.c     1531]
*** DP_FATAL_ERROR => DpWPCheck: no more work processes
*** DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1005
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 15 12:15:34 2013
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long)            Mon Jul 15 10:15:34 2013
========================

No Type  Pid    Status  Cause Start Rstr  Err Sem Time Program          Cl  User         Action                    Table
-------------------------------------------------------------------------------------------------------------------------------
0 DIA       -1 Ended         no    no     1   0    0                                    NO_ACTION                          
1 DIA       -1 Ended         no    no     1   0    0                                    NO_ACTION                          
2 DIA       -1 Ended         no    no     1   0    0                                    NO_ACTION                          
3 DIA       -1 Ended         no    no     1   0    0                                    NO_ACTION                          
4 DIA       -1 Ended         no    no     1   0    0                                    NO_ACTION                          
5 DIA       -1 Ended         no    no     1   0    0                                    NO_ACTION                          
6 UPD       -1 Ended         no    no     1   0    0                                    NO_ACTION                          
7 ENQ       -1 Ended         no    no     1   0    0                                    NO_ACTION                          
8 BTC       -1 Ended         no    no     1   0    0                                    NO_ACTION                          
9 BTC       -1 Ended         no    no     1   0    0                                    NO_ACTION                          
10 SPO       -1 Ended         no    no     1   0    0                                    NO_ACTION                          
11 UP2       -1 Ended         no    no     1   0    0                                    NO_ACTION                          
Dispatcher Queue Statistics            Mon Jul 15 10:15:34 2013
===========================

+------+--------+--------+--------+------------+------------+
|  Typ |    now |   high |    max | writes     |  reads     |
+------+--------+--------+--------+------------+------------+
| NOWP |      0 |      2 |   2000 |          6 |          6 |
+------+--------+--------+--------+------------+------------+
|  DIA |      3 |      3 |   2000 |          3 |          0 |
+------+--------+--------+--------+------------+------------+
|  UPD |      0 |      0 |   2000 |          0 |          0 |
+------+--------+--------+--------+------------+------------+
|  ENQ |      0 |      0 |   2000 |          0 |          0 |
+------+--------+--------+--------+------------+------------+
|  BTC |      0 |      0 |   2000 |          0 |          0 |
+------+--------+--------+--------+------------+------------+
|  SPO |      0 |      0 |   2000 |          0 |          0 |
+------+--------+--------+--------+------------+------------+
|  UP2 |      0 |      0 |   2000 |          0 |          0 |
+------+--------+--------+--------+------------+------------+

max_rq_id        8
wake_evt_udp_now    0

wake events          total     6,  udp     5 ( 83%),  shm     1 ( 16%)
since last update    total     6,  udp     5 ( 83%),  shm     1 ( 16%)

DpGetLoadAverage: la1[1] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[1] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[1] = 0.033333 / -1.000000 %
Dispatcher Load Statistics
+------+---------+---------+---------+
|  Typ |     LA1 |     LA5 |    LA15 |
+------+---------+---------+---------+
|  DIA |   0.000 |   0.000 |   0.033 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[2] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[2] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[2] = 0.000000 / -1.000000 %
|  UPD |   0.000 |   0.000 |   0.000 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[3] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[3] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[3] = 0.000000 / -1.000000 %
|  ENQ |   0.000 |   0.000 |   0.000 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[4] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[4] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[4] = 0.000000 / -1.000000 %
|  BTC |   0.000 |   0.000 |   0.000 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[5] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[5] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[5] = 0.000000 / -1.000000 %
|  SPO |   0.000 |   0.000 |   0.000 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[6] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[6] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[6] = 0.000000 / -1.000000 %
|  UP2 |   0.000 |   0.000 |   0.000 |
+------+---------+---------+---------+
Dump of tm_adm structure:            Mon Jul 15 10:15:34 2013
=========================

Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)
RM-T14, U15,                 , , 12:14:51, M0, W-1,     , 1/0

Workprocess Comm. Area Blocks            Mon Jul 15 10:15:34 2013
=============================

Slots: 1000, Used: 1, Max: 1
+------+--------------+----------+-------------+
|   id | owner        |   pid    | eyecatcher  |
+------+--------------+----------+-------------+
|    0 | DISPATCHER   |       -1 | 0xdeadbeef |

NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1005
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 15 12:15:39 2013
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >SAP_NSP_00                              < (normal)
DpJ2eeDisableRestart
DpMBufRead: read server list from MBUF (1 entries)
DpMBufMod: name [SAP_NSP_00                              ], types 191 state 3 (0x0 0x0 0x0 0x0)
DpMBufMod: call hooks for event MBUF_DPEVT_DSTATE (5->3)
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 60
AdCallRegisteredCvtToExt: opcode 60 call 0000000140A92030
AdCallRegisteredCvtToExt: opcode 60 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 0000000140A92CD0
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 0000000140A92CD0
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 0000000140A92CD0
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 0000000140A92CD0
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 0000000140A92CD0
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 0000000140A92CD0
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 0000000140A92CD0
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 0000000140A92CD0
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 0000000140A92CD0
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 0000000140A92CD0
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
DpWpBlksLow: wp_blks_in_queue/limit/max = 1/800/1000
DpLockWpBlkEx: lock wp ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqIPutIntoQ: put elem in queue DIA, elems=4
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 9)
MBUF server state SHUTDOWN
DpModState: change state STARTING -> SHUTDOWN

NiBufSend starting
NiIWrite: hdl 17 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
DpHalt: switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
DpHalt: stop work processes
DpHalt: stop gateway
killing process (2172) (SOFT_KILL)
DpHalt: stop icman
killing process (2360) (SOFT_KILL)
DpHalt: terminate gui connections
send SHUTDOWN to REM TM 14
DpWpBlksLow: wp_blks_in_queue/limit/max = 2/800/1000
DpLockWpBlkEx: lock wp ca_blk 2
return errno (-17) to T14
DpTmSend: errormsg without overhead: use mode 0
NiBufIAlloc: malloc NiBufadm, to 0 bytes
DpTmSend: try to send 14 bytes to T14/M0

NiBufSend starting
NiIWrite: hdl 41 sent data (wrt=14,pac=1,MESG_IO)
REL WP ca_blk 2
set status of T14 to TM_DISCONNECTED
NiBufISelUpdate: new MODE -- (r-) for hdl 41 in set0
SiSelNSet: set events of sock 468 to: ---
NiBufISelRemove: remove hdl 41 from set0
SiSelNRemove: removed sock 468
NiSelIRemove: removed hdl 41
DpDelSocketInfo: del info for nihdl 41 (pos/type=5/3)
NiICloseHandle: shutdown and close hdl 41/sock 468
NiBufIClose: clear extension for hdl 41
dp_tm_adm[14].stat = DP_SLOT_FREE
DpGetSchedule: next schedule 1373883344/211000
DpGetSchedule: no schedule found
DpITmSlotRelease: release slot 14
DpListRemove: remove elem 14 from tmadm_inuse_list
DpListRemove: 14 elems in tmadm_inuse_list
DpListInsert: insert elem 14 into tmadm_free_list (at begin)
DpListInsert: 187 elems in tmadm_free_list
DpHalt: wait for end of work processes
DpHalt: wait for end of gateway
[DpProcDied] Process lives  (PID:2172  HANDLE:896)
DpHalt: waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1005
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 15 12:15:40 2013
NiISelect: TIMEOUT occured (1000ms)
*** ERROR => [DpProcDied] Process died  (PID:2172  HANDLE:896  rc:0x0) [dpnttool2.c  147]
DpHalt: wait for end of icman
[DpProcDied] Process lives  (PID:2360  HANDLE:904)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1005
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 15 12:15:41 2013
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives  (PID:2360  HANDLE:904)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1005
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 15 12:15:42 2013
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives  (PID:2360  HANDLE:904)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1005
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 15 12:15:43 2013
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives  (PID:2360  HANDLE:904)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1005
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 15 12:15:44 2013
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives  (PID:2360  HANDLE:904)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1005
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 15 12:15:45 2013
NiISelect: TIMEOUT occured (1000ms)
*** ERROR => [DpProcDied] Process died  (PID:2360  HANDLE:904  rc:0x0) [dpnttool2.c  147]
DpStartStopMsg: send stop message (myname is >SAP_NSP_00                              <)
DpStartStopMsg: Write AD_STARTSTOP message with type=  0, name=SAP_NSP_00          , sapsysnr= 0, hostname=SAP                                                            
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 60
AdCallRegisteredCvtToExt: opcode 60 call 0000000140A92030
AdCallRegisteredCvtToExt: opcode 60 exit rc=SAP_O_K
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 4
AdCallRegisteredCvtToExt: opcode 4 call 0000000140A8E0C0
AdCallRegisteredCvtToExt: opcode 4 exit rc=SAP_O_K
DpConvertRequest: net size = 189 bytes
NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes

NiBufSend starting
NiIWrite: hdl 17 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
MsISnd2: send msg (ms hdr/msg 110/452 bytes) to name                    -, type 4, key -
DpStartStopMsg: stop msg sent
NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes
NiBufIAlloc: malloc NIBUF-IN, to 32110 bytes
NiIRead: hdl 17 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 17

NiBufReceive starting
MsINiRead: received 274 bytes
MsIReceive: received msg (ms hdr/msg 110/164 bytes), flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 17 recv would block (errno=EAGAIN)
NiIRead: read for hdl 17 timed out (0ms)
DpHalt: more messages from the message server
DpHalt: send keepalive to synchronize with the message server

NiBufSend starting
NiIWrite: hdl 17 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
MsISnd2: send msg (ms hdr/msg 110/4 bytes) to name           MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes
NiIRead: hdl 17 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 17 (r)
NiBufIAlloc: malloc NIBUF-IN, to 32110 bytes
NiIRead: hdl 17 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 17

NiBufReceive starting
MsINiRead: received 114 bytes
MsIReceive: received msg (ms hdr/msg 110/4 bytes), flag 3, from MSG_SERVER          , typ 0, key -
Received 4 bytes from MSG_SERVER                             
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsISendKeepalive : keepalive sent to message server
NiIRead: hdl 17 recv would block (errno=EAGAIN)
Mon Jul 15 12:15:46 2013
NiIPeek: peek for hdl 17 timed out (r; 1000ms)
NiIRead: read for hdl 17 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
DpHalt: detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   12858]

NiBufSend starting
NiIWrite: hdl 17 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server (SAP / 3900)
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 17 in set0
SiSelNSet: set events of sock 892 to: ---
NiBufISelRemove: remove hdl 17 from set0
SiSelNRemove: removed sock 892 (pos=2)
SiSelNRemove: removed sock 892
NiSelIRemove: removed hdl 17
DpDelSocketInfo: del info for nihdl 17 (pos/type=2/4)
MBUF state OFF
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 60
AdCallRegisteredCvtToExt: opcode 60 call 0000000140A92030
AdCallRegisteredCvtToExt: opcode 60 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 0000000140A92CD0
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 0000000140A92CD0
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
DpWpBlksLow: wp_blks_in_queue/limit/max = 2/800/1000
DpLockWpBlkEx: lock wp ca_blk 2
make DISP owner of wp_ca_blk 2
DpRqIPutIntoQ: put elem in queue DIA, elems=5
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 12)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 17/sock 892
NiBufIClose: clear extension for hdl 17
MsIDetach: detach MS-system (SAP / 3900)
DpHalt: cleanup EM
EsCleanup( )
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 1620) [dpxxdisp.c   11380]
DpHalt: Good Bye .....

Former Member
0 Kudos

Hi ,

Please past the dev_* logs from the work directory.

Thanks

Rishi Abrol

mahendragulla
Explorer
0 Kudos

Hi Rishi

Thanks for the reply.  The following the file from C:\usr\sap\NSP\DVEBMGS00\work.

With best regards

mahendra


---------------------------------------------------
trc file: "dev_w0", trc level: 1, release: "720"
---------------------------------------------------
*
*  ACTIVE TRACE LEVEL           1
*  ACTIVE TRACE COMPONENTS      all, MJ
*
M sysno      00
M sid        NSP
M systemid   562 (PC with Windows NT)
M relno      7200
M patchlevel 0
M patchno    201
M intno      20020600
M make       multithreaded, Unicode, 64 bit, optimized
M profile    \\SAP\sapmnt\NSP\SYS\profile\NSP_DVEBMGS00_SAP
M pid        2520
M
M  kernel runs with dp version 133000(ext=118000) (@(#) DPLIB-INT-VERSION-133000-UC)
M  length of sys_adm_ext is 588 bytes
M  ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 2520) [dpxxdisp.c   1377]
I  MtxInit: 30000 0 0
M  DpSysAdmExtCreate: ABAP is active
M  DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active

M Mon Jul 15 12:14:49 2013
M  DpIPCInit2: read dp-profile-values from sys_adm_ext
M  DpShMCreate: sizeof(wp_adm)        31696    (2264)
M  DpShMCreate: sizeof(tm_adm)        5517056    (27448)
M  DpShMCreate: sizeof(wp_ca_adm)        64000    (64)
M  DpShMCreate: sizeof(appc_ca_adm)    64000    (64)
M  DpCommTableSize: max/headSize/ftSize/tableSize=500/16/584064/584080
M  DpShMCreate: sizeof(comm_adm)        584080    (1144)
M  DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M  DpShMCreate: sizeof(slock_adm)        0    (296)
M  DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M  DpShMCreate: sizeof(file_adm)        0    (80)
M  DpShMCreate: sizeof(vmc_adm)        0    (2152)
M  DpShMCreate: sizeof(wall_adm)        (41664/42896/64/192)
M  DpShMCreate: sizeof(gw_adm)    48
M  DpShMCreate: sizeof(j2ee_adm)    3952
M  DpShMCreate: SHM_DP_ADM_KEY        (addr: 000000000FC10050, size: 6363600)
M  DpShMCreate: allocated sys_adm at 000000000FC10060
M  DpShMCreate: allocated wp_adm_list at 000000000FC13070
M  DpShMCreate: allocated wp_adm at 000000000FC13260
M  DpShMCreate: allocated tm_adm_list at 000000000FC1AE40
M  DpShMCreate: allocated tm_adm at 000000000FC1AE90
M  DpShMCreate: allocated wp_ca_adm at 000000001015DDA0
M  DpShMCreate: allocated appc_ca_adm at 000000001016D7B0
M  DpShMCreate: allocated comm_adm at 000000001017D1C0
M  DpShMCreate: system runs without slock table
M  DpShMCreate: system runs without file table
M  DpShMCreate: allocated vmc_adm_list at 000000001020BB60
M  DpShMCreate: system runs without vmc_adm
M  DpShMCreate: allocated gw_adm at 000000001020BC10
M  DpShMCreate: allocated j2ee_adm at 000000001020BC50
M  DpShMCreate: allocated ca_info at 000000001020CBD0
M  DpShMCreate: allocated wall_adm at 000000001020CC60
M  DpCommAttachTable: attached comm table (header=000000001017D1C0/ft=000000001017D1D0)

M Mon Jul 15 12:14:50 2013
M  DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 from sys_adm
M  rdisp/queue_size_check_value :  -> on,50,30,40,500,50,500,80
X  EmInit: MmSetImplementation( 2 ).
X  MM global diagnostic options set: 0
X  <ES> client 0 initializing ....
X  <ES> EsILock: use spinlock for locking
X  Using implementation view
X  <EsNT> Using memory model view.
M  <EsNT> Memory Reset disabled as NT default
X  ES initialized.

X Mon Jul 15 12:14:51 2013
X  mm.dump: set maximum dump mem to 96 MB
M  DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE
M  ThStart: taskhandler started
M  ThInit: initializing DIA work process W0

M Mon Jul 15 12:14:57 2013
M  ThInit: running on host SAP
M  calling db_connect ...
B  Loading DB library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' ...
B  Library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' loaded
B  Version of 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' is "720.00", patchlevel (0.201)

C Mon Jul 15 12:14:58 2013

C  DBSDBSLIB : version 720.00, patch 0.201 (Make PL 0.201)
C  MAXDB shared library (dbsdbslib) patchlevels (last 10)
C    (0.201) Take care of warnings during database connect (note 1600066)
C    (0.117) Define a primary key on the temp tables for R3szchk (note 1606260)
C    (0.114) Support of MaxDB 7.8 and 7.9 (note 1653058)
C    (0.103) Close all lob locators at end of the transaction (note 1626591)
C    (0.101) Fix for unknown table __TABLE_SIZES_ (R3szchk) (note 1619504)
C    (0.098) Use filesystem counter for R3szchk (note 1606260)
C    (0.092) Secondary connection to HANA (note 1481256)
C    (0.089) UPDSTAT with SAPSYSTEMNAME longer as 3 characters (note 1584921)
C    (0.081) No UPSERT on WBCROSSGT (note 1521468)
C    (0.080) New feature batch streaming (note 1340617)


C  Loading SQLDBC client runtime ...

C Mon Jul 15 12:14:59 2013
C  SQLDBC Module  : C:\sapdb\clients\NSP\pgm\libSQLDBC77.dll
C  SQLDBC SDK     : SQLDBC.H  7.9.7    BUILD 010-123-243-190
C  SQLDBC Runtime : libSQLDBC 7.9.7    BUILD 010-123-243-190
C  SQLDBC client runtime is MaxDB 7.9.7.010 CL 243190
C  SQLDBC supports new DECIMAL interface : 1
C  SQLDBC supports VARIABLE INPUT data   : 1
C  SQLDBC supports VARIABLE OUTPUT data  : 1
C  SQLDBC supports Multiple Streams      : 1
C  SQLDBC supports LOB LOCATOR KEEPALIVE : 1
C  SQLDBC supports LOB LOCATOR COPY      : 1
C  SQLDBC supports BULK SELECT with LOBS : 1
C  SQLDBC supports BATCH STREAM          : 1
C  INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C  Try to connect (DEFAULT) on connection 0 ...
C  *** ERROR => Connect to database failed, rc = -10709 (Connection failed (RTE:[5] database not running))
[dbsdbsql.cpp 139]
B  ***LOG BV3=> severe db error -10709    ; work process is stopped [dbsh         1241]
B  ***LOG BY2=> sql error -10709 performing CON [dblink       544]
B  ***LOG BY0=> Connection failed (RTE:[5] database not running) [dblink       544]
M  ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1490]
M  in_ThErrHandle: 1
M  *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   11321]

M  Info for wp 0

M    pid = 2520
M    severity = 0
M    status = 0
M    stat = WP_NEW
M    waiting_for = NO_WAITING
M    reqtype = DP_RQ_DIAWP
M    act_reqtype = NO_REQTYPE
M    req.req_info =
M    req.tid = -1
M    req.uid = 4294967295
M    req.mode = 255
M    req.len = 0
M    req.rq_id = 65535
M    req.rq_source =
M    last_tid = 0
M    last_uid = 0
M    last_mode = 0
M    act_cs_count = 0
M    csTrack = 0
M    csTrackRwExcl = 0
M    csTrackRwShrd = 0
M    mode_cleaned_counter = 0
M    control_flag = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M    attachedVm = no VM

M  ThIErrHandle: current request:

M  -IN-- sender_id ?                 tid  -1    wp_ca_blk   -1      wp_id -1
M  -IN-- action    -                 uid  -1    appc_ca_blk -1      type  -   
M  -IN-- new_stat  NO_CHANGE         mode 255   len         0       rq_id -1

M  *****************************************************************************
M  *
M  *  LOCATION    SAP-Server SAP_NSP_00 on host SAP (wp 0)
M  *  ERROR       ThInit: db_connect
M  *
M  *  TIME        Mon Jul 15 12:14:59 2013
M  *  RELEASE     720
M  *  COMPONENT   Taskhandler
M  *  VERSION     1
M  *  RC          13
M  *  MODULE      thxxhead.c
M  *  LINE        11602
M  *  COUNTER     1
M  *
M  *****************************************************************************

M  PfStatDisconnect: disconnect statistics
M  Entering TH_CALLHOOKS
M  ThCallHooks: call hook >ThrBtcCallLgCl< for event BEFORE_DUMP
M  ThCallHooks: hook >ThrBtcCallLgCl< o.k.
M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M  *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   844]
M  *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c  303]
M  ThIErrHandle: entering ThSetStatError
M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M  Entering ThReadDetachMode
M  call ThrShutDown (1)...
M  ***LOG Q02=> wp_halt, WPStop (Workp. 0 2520) [dpnttool.c   339]