on 06-19-2013 1:34 PM
Dear Experts,
I am wondering if the standard way how networks are displayed in the project builder can be changed.
Example:
Below a WBS-Element following networks were created:
Network 1, ID 900120, NW-description: “group 1”
Network 2, ID 900121, NW-description: “group 2”
Network 3, ID 900122, NW-description: “group 3”
At a later stage a user might create a 4th network with ID 900300. The 4th network shall be displayed between network 2 and network 3 and would have the description “group 3”. Afterwards the user will rename the network with ID 900122 from “group3” into “group4”.
Unfortunately, the project builder displays the networks according their ID in following way:
Network 1, ID 900120, NW-description: “group 1”
Network 2, ID 900121, NW-description: “group 2”
Network 3, ID 900122, NW-description: “group 4”
Network 4, ID 900300, NW-description: “group 3”
Is there a possibility to sort in the project builder the networks according another criterion than the network ID, e.g. the network description?
Thanks,
GM
Hi GM,
There is no standard sort functionality in the project builder. This could only be realised via modification.
Regards,
Brendan
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
95 | |
11 | |
9 | |
5 | |
3 | |
3 | |
3 | |
3 | |
3 | |
3 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.