on 03-06-2007 12:39 AM
Hi all,
Xi system has already been configirated , but how to connect
R3 system to xi .
Anyone can give me help , thanks!
nelson
in case of sending/ receiving Idocs, the following connections needs to be established;
In XI
SM59 - R3 connection pointing to R3
IDX1 - define the port with the above dest.
In R3
SM59 - R3 connection pointing to XI
WE21 - define the port with the above dest.
WE20 - Partner profile type outbound/Inbound
For connection in case of ABAP proxy. ref;
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
check these threads....
https://websmp101.sap-ag.de/~sapdownload/011000358700003604082004E/HowTo_IDOC_XI_Scenarios.pdf
Message was edited by:
Raghavesh Reddy
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
hi
i know your method is right,but i have created related information at IDX1.However,when i executed the IDX2,i couldn't find the port created at IDX1.I import PORT at IDX1 in Source Port when I was importing MATMAS in Message Type directly. A error rises when I save the configuration.Could you help me find out the reason? Besides, does it matter that my R/3 and XI are all temporary License?
nelson
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Nelson,
<i>I import PORT at IDX1 in Source Port when I was importing MATMAS in Message Type directly</i> - you dont have to import port in IDX1 but you will have to create a port in IDX1 for SAP if you already dont have..........if you have a port of SAP, then in IDX2, click that port, then click create button, in IDOC type give MATMAS and in port give your SAP port name of IDX1.......then click continue...then you will see yur MATMAS idoc in SAP port in IDX2 in XI......
Thanks,
Rajeev Gupta
HI,
What is the error..
Please see the below links
idoc settings /people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
idoc erros - http://help.sap.com/saphelp_nw04s/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
IDoc erros troubleshooting - /people/raja.thangamani/blog/2007/07/19/troubleshooting-of-ale-process
Regards
Chilla..
hi,
when i executed the IDX2,MESSAGE TYEPE doesn't been created automatically,and i have no idea of how to find this Message type or to enter some value.could you tell me a detailed method while teaching the theory?
nelson
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Raghavesh Reddy
I have configured it based on your introduction.
But I do not know how to choose the IDOC Message Type in Load Meta Data for IDOC
And can you explan sld more clearly!
ps.this is about how R3 connect to XI by IDOC, how about RFC?
nelson
null
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
hi,
But I do not know how to choose the IDOC Message Type in Load Meta Data for IDOC
And can you explan sld more clearly!
- This step doesn't required..runtime only it will load the idoc data tcode : IDX2.
No need manually intermention in IDX2.
then how about RFC - Create at XI ent to connect R/3
and same thing create R/3 end to connect XI.
Regards,
Venu.
But I do not know how to choose the IDOC Message Type in Load Meta Data for IDOC
>>click on the port you have created in IDX1 . then in IDX2 select the port and click create or F5 to do this then it asks for IDOC Type enter it then ask for Messge type enter then source port.
Message type is frist part of IDOC MATMAS.MATMAS04 here MATMAS is message type.
HI,
In case of Idocs..
please see the below link
idoc settings /people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
If it is related to connecting the
Regrds
Chilla..
<i>Points if it is useful..</i>
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
ALE settings.
<u><b>SAP XI</b></u><b>1) RFC Destination (SM59)</b>
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
<b>h) Test the connection and remote logon.
2) Create Port (IDX1)</b>
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
<b>3) Load Meta Data for IDOC (IDX2)</b>
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
<u><b>SAP R/3</b></u>
<b>1) RFC Destination (SM59)</b>
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
<b>2) Create Port (We21)</b>
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
<b>3) Create Partner Profile (WE20)</b>
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
<u><b>In SLD System Landscape Directory</b></u>
TS for R/3 (Logical system):-Assign the client name created in R/3 as Logical system Name.
Ts for Third Party (Logical system):-
BS for SAP R/3 (Logical system):- Assign the client name created in R/3 as Logical system Name.
BS for Third Party (Logical system):-Enter the XI logical system name.
<b>In Transaction SALE</b>
Define and Assign the logical system name.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi all,
don't we need some configration in R3 system before start development of xi and r3 .
And is there any configration document above base on RFC connection ?
thank for you help !
nelson
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Nelson,
We can choose right interface that is depending on our requirement.
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/2162. [original link is broken] [original link is broken] [original link is broken] [original link is broken]
Regards,
Deviprasad
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Nelson,
Go through this document:
https://wiki.sdn.sap.com/wiki/display/XI/SAPR3%28Idocs%29ToXI--Steps+Summarized
---Satish
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
89 | |
10 | |
9 | |
9 | |
9 | |
6 | |
6 | |
5 | |
5 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.