on 06-01-2013 9:51 PM
Hello i have a ECC on windows and Maxdb and the Disp+work y getting offline
here is the trace:
---------------------------------------------------
trc file: "dev_disp", trc level: 1, release: "720"
---------------------------------------------------
sysno 03
sid PRD
systemid 562 (PC with Windows NT)
relno 7200
patchlevel 0
patchno 46
intno 20020600
make multithreaded, Unicode, 64 bit, optimized
profile \\SANOFI-PRD\sapmnt\PRD\SYS\profile\PRD_DVEBMGS03_SANOFI-PRD
pid 4000
Sat Jun 01 15:17:38 2013
kernel runs with dp version 125000(ext=118000) (@(#) DPLIB-INT-VERSION-125000-UC)
length of sys_adm_ext is 588 bytes
*** SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (03 4000) [dpxxdisp.c 1252]
shared lib "dw_xml.dll" version 46 successfully loaded
shared lib "dw_xtc.dll" version 46 successfully loaded
shared lib "dw_stl.dll" version 46 successfully loaded
shared lib "dw_gui.dll" version 46 successfully loaded
shared lib "dw_mdm.dll" version 46 successfully loaded
shared lib "dw_rndrt.dll" version 46 successfully loaded
shared lib "dw_abp.dll" version 46 successfully loaded
shared lib "dw_sym.dll" version 46 successfully loaded
shared lib "dw_aci.dll" version 46 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3903
rdisp/dynamic_wp_check : 1
rdisp/calculateLoadAverage : 1
Sat Jun 01 15:17:43 2013
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 6393]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is active
DpIPCInit2: write dp-profile-values into sys_adm_ext
DpIPCInit2: start server >SANOFI-PRD_PRD_03 <
DpShMCreate: sizeof(wp_adm) 43024 (2264)
DpShMCreate: sizeof(tm_adm) 5517056 (27448)
DpShMCreate: sizeof(wp_ca_adm) 64000 (64)
DpShMCreate: sizeof(appc_ca_adm) 64000 (64)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/584064/584080
DpShMCreate: sizeof(comm_adm) 584080 (1144)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=512/48/65600/90416/156064
DpShMCreate: sizeof(slock_adm) 156064 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=3800/16/364864/364880
DpShMCreate: sizeof(file_adm) 364880 (80)
DpShMCreate: sizeof(vmc_adm) 40896 (2152)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: sizeof(j2ee_adm) 3936
DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000007A50050, size: 6930432)
DpShMCreate: allocated sys_adm at 0000000007A50060
DpShMCreate: allocated wp_adm_list at 0000000007A53030
DpShMCreate: allocated wp_adm at 0000000007A53220
DpShMCreate: allocated tm_adm_list at 0000000007A5DA40
DpShMCreate: allocated tm_adm at 0000000007A5DA90
DpShMCreate: allocated wp_ca_adm at 0000000007FA09A0
DpShMCreate: allocated appc_ca_adm at 0000000007FB03B0
DpShMCreate: allocated comm_adm at 0000000007FBFDC0
DpShMCreate: allocated slock_adm at 000000000804E760
DpShMCreate: allocated file_adm at 0000000008074910
DpShMCreate: allocated vmc_adm_list at 00000000080CDA70
DpShMCreate: allocated vmc_adm at 00000000080CDB20
DpShMCreate: allocated gw_adm at 00000000080D7AF0
DpShMCreate: allocated j2ee_adm at 00000000080D7B30
DpShMCreate: allocated ca_info at 00000000080D8AA0
DpShMCreate: allocated wall_adm at 00000000080D8AC0
DpCommAttachTable: attached comm table (header=0000000007FBFDC0/ft=0000000007FBFDD0)
DpSysAdmIntInit: initialize sys_adm
rdisp/test_roll : roll strategy is DP_NORMAL_ROLL
dia token check not active (10 token)
MBUF state OFF
DpCommInitTable: init table for 500 entries
DpFileInitTable: init table for 3800 entries
DpSesCreateTable: created session table at 0000000005980050 (len=161328)
DpRqQInit: keep protect_queue / slots_per_queue 0 / 2001 in sys_adm
rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
Sat Jun 01 15:17:44 2013
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
<ES> Info: em/initial_size_MB( 16383MB) not multiple of em/blocksize_KB( 4096KB)
<ES> Info: em/initial_size_MB rounded up to 16384MB
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 4095 blocks reserved for free list.
ES initialized.
DpVmcSetActive: set vmc state DP_VMC_ENABLED
DpVmcSetActive: set vmc state DP_VMC_ACTIVE
DpVmcInit2: o.k.
MPI: dynamic quotas disabled.
MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.4 3.4 4.1) [dpxxdisp.c 1638]
***LOG Q0K=> DpMsAttach, mscon ( SANOFI-PRD) [dpxxdisp.c 12244]
MBUF state LOADING
DpStartStopMsg: send start message (myname is >SANOFI-PRD_PRD_03 <)
DpStartStopMsg: start msg sent
CCMS uses Shared Memory Key 73 for monitoring.
CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.
CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1296]
MBUF state ACTIVE
DpWpBlksLow: max wp blocks in queue is 800 (80 %)
MBUF component UP
DpMsgProcess: 1 server in MBUF
DpAppcBlksLow: max appc blocks in queue is 500 (50 %)
Sat Jun 01 15:18:24 2013
*** ERROR => DpHdlDeadWp: W0 (pid 2008) died (severity=0, status=0) [dpxxwp.c 1507]
*** ERROR => DpHdlDeadWp: W1 (pid 3500) died (severity=0, status=0) [dpxxwp.c 1507]
*** ERROR => DpHdlDeadWp: W2 (pid 3508) died (severity=0, status=0) [dpxxwp.c 1507]
*** ERROR => DpHdlDeadWp: W3 (pid 1108) died (severity=0, status=0) [dpxxwp.c 1507]
*** ERROR => DpHdlDeadWp: W4 (pid 1872) died (severity=0, status=0) [dpxxwp.c 1507]
*** ERROR => DpHdlDeadWp: W5 (pid 2508) died (severity=0, status=0) [dpxxwp.c 1507]
*** ERROR => DpHdlDeadWp: W6 (pid 2076) died (severity=0, status=0) [dpxxwp.c 1507]
*** ERROR => DpHdlDeadWp: W7 (pid 2180) died (severity=0, status=0) [dpxxwp.c 1507]
*** ERROR => DpHdlDeadWp: W8 (pid 2412) died (severity=0, status=0) [dpxxwp.c 1507]
*** ERROR => DpHdlDeadWp: W9 (pid 3984) died (severity=0, status=0) [dpxxwp.c 1507]
*** ERROR => DpHdlDeadWp: W10 (pid 1216) died (severity=0, status=0) [dpxxwp.c 1507]
*** ERROR => DpHdlDeadWp: W11 (pid 3972) died (severity=0, status=0) [dpxxwp.c 1507]
*** ERROR => DpHdlDeadWp: W12 (pid 3108) died (severity=0, status=0) [dpxxwp.c 1507]
*** ERROR => DpHdlDeadWp: W13 (pid 3172) died (severity=0, status=0) [dpxxwp.c 1507]
*** ERROR => DpHdlDeadWp: W14 (pid 1976) died (severity=0, status=0) [dpxxwp.c 1507]
*** ERROR => DpHdlDeadWp: W15 (pid 2976) died (severity=0, status=0) [dpxxwp.c 1507]
*** ERROR => DpHdlDeadWp: W16 (pid 1844) died (severity=0, status=0) [dpxxwp.c 1507]
*** DP_FATAL_ERROR => DpWPCheck: no more work processes
*** DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1121
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Jun 01 15:18:34 2013
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Sat Jun 01 22:18:34 2013
========================
No Type Pid Status Cause Start Rstr Err Sem Time Program Cl User Action Table
-------------------------------------------------------------------------------------------------------------------------------
0 DIA -1 Ended no no 1 0 0
1 DIA -1 Ended no no 1 0 0
2 DIA -1 Ended no no 1 0 0
3 DIA -1 Ended no no 1 0 0
4 DIA -1 Ended no no 1 0 0
5 DIA -1 Ended no no 1 0 0
6 DIA -1 Ended no no 1 0 0
7 DIA -1 Ended no no 1 0 0
8 DIA -1 Ended no no 1 0 0
9 DIA -1 Ended no no 1 0 0
10 UPD -1 Ended no no 1 0 0
11 ENQ -1 Ended no no 1 0 0
12 BTC -1 Ended no no 1 0 0
13 BTC -1 Ended no no 1 0 0
14 BTC -1 Ended no no 1 0 0
15 SPO -1 Ended no no 1 0 0
16 UP2 -1 Ended no no 1 0 0
Dispatcher Queue Statistics Sat Jun 01 22:18:34 2013
===========================
+------+--------+--------+--------+------------+------------+
| Typ | now | high | max | writes | reads |
+------+--------+--------+--------+------------+------------+
| NOWP | 0 | 2 | 2000 | 6 | 6 |
+------+--------+--------+--------+------------+------------+
| DIA | 5 | 5 | 2000 | 5 | 0 |
+------+--------+--------+--------+------------+------------+
| UPD | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+------------+------------+
| ENQ | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+------------+------------+
| BTC | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+------------+------------+
| SPO | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+------------+------------+
| UP2 | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+------------+------------+
max_rq_id 10
wake_evt_udp_now 0
wake events total 8, udp 7 ( 87%), shm 1 ( 12%)
since last update total 8, udp 7 ( 87%), shm 1 ( 12%)
DpGetLoadAverage: la1[1] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[1] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[1] = 0.055556 / -1.000000 %
Dispatcher Load Statistics
+------+---------+---------+---------+
| Typ | LA1 | LA5 | LA15 |
+------+---------+---------+---------+
| DIA | 0.000 | 0.000 | 0.056 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[2] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[2] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[2] = 0.000000 / -1.000000 %
| UPD | 0.000 | 0.000 | 0.000 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[3] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[3] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[3] = 0.000000 / -1.000000 %
| ENQ | 0.000 | 0.000 | 0.000 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[4] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[4] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[4] = 0.000000 / -1.000000 %
| BTC | 0.000 | 0.000 | 0.000 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[5] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[5] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[5] = 0.000000 / -1.000000 %
| SPO | 0.000 | 0.000 | 0.000 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[6] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[6] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[6] = 0.000000 / -1.000000 %
| UP2 | 0.000 | 0.000 | 0.000 |
+------+---------+---------+---------+
Dump of tm_adm structure: Sat Jun 01 22:18:34 2013
=========================
Term uid man user term lastop mod wp ta a/i (modes)
RM-T19, U20, , , 15:17:49, M0, W-1, , 1/0
Workprocess Comm. Area Blocks Sat Jun 01 22:18:34 2013
=============================
Slots: 1000, Used: 1, Max: 1
+------+--------------+----------+-------------+
| id | owner | pid | eyecatcher |
+------+--------------+----------+-------------+
| 0 | DISPATCHER | -1 | 0xdeadbeef |
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1121
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Jun 01 15:18:39 2013
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >SANOFI-PRD_PRD_03 < (normal)
DpJ2eeDisableRestart
DpMBufRead: read server list from MBUF (1 entries)
DpMBufMod: name [SANOFI-PRD_PRD_03 ], types 191 state 3 (0x2 0x0 0x0 0x0)
DpMBufMod: call hooks for event MBUF_DPEVT_DSTATE (5->3)
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 60
AdCallRegisteredCvtToExt: opcode 60 call 00000001417434D0
AdCallRegisteredCvtToExt: opcode 60 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 0000000141744290
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 0000000141744290
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 0000000141744290
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 0000000141744290
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 0000000141744290
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 0000000141744290
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 0000000141744290
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 0000000141744290
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 0000000141744290
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 0000000141744290
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
DpWpBlksLow: wp_blks_in_queue/limit/max = 1/800/1000
DpLockWpBlkEx: lock wp ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqIPutIntoQ: put elem in queue DIA, elems=6
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 11)
MBUF server state SHUTDOWN
DpModState: change state STARTING -> SHUTDOWN
NiBufSend starting
NiIWrite: hdl 17 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
DpHalt: switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
DpHalt: stop work processes
DpHalt: stop gateway
killing process (3000) (SOFT_KILL)
DpHalt: stop icman
killing process (588) (SOFT_KILL)
DpHalt: terminate gui connections
send SHUTDOWN to REM TM 19
DpWpBlksLow: wp_blks_in_queue/limit/max = 2/800/1000
DpLockWpBlkEx: lock wp ca_blk 2
return errno (-17) to T19
DpTmSend: errormsg without overhead: use mode 0
NiBufIAlloc: malloc NiBufadm, to 0 bytes
DpTmSend: try to send 14 bytes to T19/M0
NiBufSend starting
NiIWrite: hdl 33 sent data (wrt=14,pac=1,MESG_IO)
REL WP ca_blk 2
set status of T19 to TM_DISCONNECTED
NiBufISelUpdate: new MODE -- (r-) for hdl 33 in set0
SiSelNSet: set events of sock 1116 to: ---
NiBufISelRemove: remove hdl 33 from set0
SiSelNRemove: removed sock 1116 (pos=4)
SiSelNRemove: removed sock 1116
NiSelIRemove: removed hdl 33
DpDelSocketInfo: del info for nihdl 33 (pos/type=4/3)
NiICloseHandle: shutdown and close hdl 33/sock 1116
NiBufIClose: clear extension for hdl 33
dp_tm_adm[19].stat = DP_SLOT_FREE
DpGetSchedule: next schedule 1370125124/889000
DpGetSchedule: no schedule found
DpITmSlotRelease: release slot 19
DpListRemove: remove elem 19 from tmadm_inuse_list
DpListRemove: 19 elems in tmadm_inuse_list
DpListInsert: insert elem 19 into tmadm_free_list (at begin)
DpListInsert: 182 elems in tmadm_free_list
DpHalt: wait for end of work processes
DpHalt: wait for end of gateway
[DpProcDied] Process lives (PID:3000 HANDLE:1000)
DpHalt: waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1121
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Jun 01 15:18:40 2013
NiISelect: TIMEOUT occured (1000ms)
*** ERROR => [DpProcDied] Process died (PID:3000 HANDLE:1000 rc:0x0) [dpnttool2.c 147]
DpHalt: wait for end of icman
[DpProcDied] Process lives (PID:588 HANDLE:1008)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1121
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Jun 01 15:18:41 2013
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:588 HANDLE:1008)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1121
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Jun 01 15:18:42 2013
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:588 HANDLE:1008)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1121
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Jun 01 15:18:43 2013
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:588 HANDLE:1008)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1121
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Jun 01 15:18:44 2013
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:588 HANDLE:1008)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1121
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Jun 01 15:18:45 2013
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:588 HANDLE:1008)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1121
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Jun 01 15:18:47 2013
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:588 HANDLE:1008)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1121
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Jun 01 15:18:48 2013
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:588 HANDLE:1008)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1121
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Jun 01 15:18:49 2013
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:588 HANDLE:1008)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1121
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Jun 01 15:18:50 2013
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:588 HANDLE:1008)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1121
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Jun 01 15:18:51 2013
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:588 HANDLE:1008)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1121
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Jun 01 15:18:52 2013
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:588 HANDLE:1008)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1121
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Jun 01 15:18:53 2013
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:588 HANDLE:1008)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1121
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Jun 01 15:18:54 2013
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:588 HANDLE:1008)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1121
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Jun 01 15:18:55 2013
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:588 HANDLE:1008)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1121
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Jun 01 15:18:56 2013
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:588 HANDLE:1008)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1121
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Jun 01 15:18:57 2013
NiISelect: TIMEOUT occured (1000ms)
*** ERROR => [DpProcDied] Process died (PID:588 HANDLE:1008 rc:0x0) [dpnttool2.c 147]
DpStartStopMsg: send stop message (myname is >SANOFI-PRD_PRD_03 <)
DpStartStopMsg: Write AD_STARTSTOP message with type= 0, name=SANOFI-PRD_PRD_03 , sapsysnr= 3, hostname=SANOFI-PRD
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 60
AdCallRegisteredCvtToExt: opcode 60 call 00000001417434D0
AdCallRegisteredCvtToExt: opcode 60 exit rc=SAP_O_K
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 4
AdCallRegisteredCvtToExt: opcode 4 call 000000014173F110
AdCallRegisteredCvtToExt: opcode 4 exit rc=SAP_O_K
DpConvertRequest: net size = 189 bytes
NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes
NiBufSend starting
NiIWrite: hdl 17 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
MsISnd2: send msg (ms hdr/msg 110/452 bytes) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes
NiBufIAlloc: malloc NIBUF-IN, to 32110 bytes
NiIRead: hdl 17 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 17
NiBufReceive starting
MsINiRead: received 274 bytes
MsIReceive: received msg (ms hdr/msg 110/164 bytes), flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 17 recv would block (errno=EAGAIN)
NiIRead: read for hdl 17 timed out (0ms)
DpHalt: more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 17 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
MsISnd2: send msg (ms hdr/msg 110/4 bytes) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes
NiIRead: hdl 17 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 17 (r)
NiBufIAlloc: malloc NIBUF-IN, to 32110 bytes
NiIRead: hdl 17 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 17
NiBufReceive starting
MsINiRead: received 114 bytes
MsIReceive: received msg (ms hdr/msg 110/4 bytes), flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsISendKeepalive : keepalive sent to message server
NiIRead: hdl 17 recv would block (errno=EAGAIN)
Sat Jun 01 15:18:58 2013
NiIPeek: peek for hdl 17 timed out (r; 1000ms)
NiIRead: read for hdl 17 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
DpHalt: detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12635]
NiBufSend starting
NiIWrite: hdl 17 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server (SANOFI-PRD / 3903)
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 17 in set0
SiSelNSet: set events of sock 996 to: ---
NiBufISelRemove: remove hdl 17 from set0
SiSelNRemove: removed sock 996 (pos=2)
SiSelNRemove: removed sock 996
NiSelIRemove: removed hdl 17
DpDelSocketInfo: del info for nihdl 17 (pos/type=2/4)
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 60
AdCallRegisteredCvtToExt: opcode 60 call 00000001417434D0
AdCallRegisteredCvtToExt: opcode 60 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 0000000141744290
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 0000000141744290
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
DpWpBlksLow: wp_blks_in_queue/limit/max = 2/800/1000
DpLockWpBlkEx: lock wp ca_blk 2
make DISP owner of wp_ca_blk 2
DpRqIPutIntoQ: put elem in queue DIA, elems=7
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 14)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 17/sock 996
NiBufIClose: clear extension for hdl 17
MsIDetach: detach MS-system (SANOFI-PRD / 3903)
DpHalt: cleanup EM
EsCleanup( )
EsCleanup ....
EmCleanup() -> 0
Em2Cleanup: Cleanup EM2
Eg2Cleanup: Cleanup EG2
Es2Cleanup: Cleanup ES2
Es2ResLocSlotClear: clear slot 0
Es2ResLocSlotClear: clear slot 0
Es2ResLocSlotClear: clear slot 0
Es2ResLocSlotClear: clear slot 0
***LOG Q05=> DpHalt, DPStop ( 4000) [dpxxdisp.c 11107]
DpHalt: Good Bye .....
im getting this error:
*** ERROR => DpHdlDeadWp: W0 (pid 2008) died (severity=0, status=0) [dpxxwp.c 1507]
*** ERROR => DpHdlDeadWp: W1 (pid 3500) died (severity=0, status=0) [dpxxwp.c 1507]
*** ERROR => DpHdlDeadWp: W2 (pid 3508) died (severity=0, status=0) [dpxxwp.c 1507]
*** ERROR => DpHdlDeadWp: W3 (pid 1108) died (severity=0, status=0) [dpxxwp.c 1507]
*** ERROR => DpHdlDeadWp: W4 (pid 1872) died (severity=0, status=0) [dpxxwp.c 1507]
*** ERROR => DpHdlDeadWp: W5 (pid 2508) died (severity=0, status=0) [dpxxwp.c 1507]
*** ERROR => DpHdlDeadWp: W6 (pid 2076) died (severity=0, status=0) [dpxxwp.c 1507]
*** ERROR => DpHdlDeadWp: W7 (pid 2180) died (severity=0, status=0) [dpxxwp.c 1507]
*** ERROR => DpHdlDeadWp: W8 (pid 2412) died (severity=0, status=0) [dpxxwp.c 1507]
*** ERROR => DpHdlDeadWp: W9 (pid 3984) died (severity=0, status=0) [dpxxwp.c 1507]
*** ERROR => DpHdlDeadWp: W10 (pid 1216) died (severity=0, status=0) [dpxxwp.c 1507]
*** ERROR => DpHdlDeadWp: W11 (pid 3972) died (severity=0, status=0) [dpxxwp.c 1507]
*** ERROR => DpHdlDeadWp: W12 (pid 3108) died (severity=0, status=0) [dpxxwp.c 1507]
*** ERROR => DpHdlDeadWp: W13 (pid 3172) died (severity=0, status=0) [dpxxwp.c 1507]
*** ERROR => DpHdlDeadWp: W14 (pid 1976) died (severity=0, status=0) [dpxxwp.c 1507]
*** ERROR => DpHdlDeadWp: W15 (pid 2976) died (severity=0, status=0) [dpxxwp.c 1507]
*** ERROR => DpHdlDeadWp: W16 (pid 1844) died (severity=0, status=0) [dpxxwp.c 1507]
*** DP_FATAL_ERROR => DpWPCheck: no more work processes
*** DISPATCHER EMERGENCY SHUTDOWN ***
can you tell me how to solve it?
i already restart the server and it does not work.
Regards,
Aleajandro
Hello experts,
the R3trans -d now returns
C:\Users\prdadm>r3trans -d
This is r3trans version 6.23 (release 720 - 31.10.12 - 20:12:06).
unicode enabled version
R3trans=>sapparam(1c): No Profile used.
R3trans=>sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
r3trans finished (0000).
but the DISP+WORK.EXE shuts down automatically after a brief start
the DB is getting online whit out any trouble.
heres the dev_disp
---------------------------------------------------
trc file: "dev_disp", trc level: 1, release: "720"
---------------------------------------------------
sysno 03
sid PRD
systemid 562 (PC with Windows NT)
relno 7200
patchlevel 0
patchno 401
intno 20020600
make multithreaded, Unicode, 64 bit, optimized
profile \\SANOFI-PRD\sapmnt\PRD\SYS\profile\PRD_DVEBMGS03_SANOFI-PRD
pid 4032
kernel runs with dp version 138000(ext=119000) (@(#) DPLIB-INT-VERSION-138000-UC)
length of sys_adm_ext is 588 bytes
*** SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (03 4032) [dpxxdisp.c 1320]
shared lib "dw_xml.dll" version 401 successfully loaded
shared lib "dw_xtc.dll" version 401 successfully loaded
shared lib "dw_stl.dll" version 401 successfully loaded
shared lib "dw_gui.dll" version 401 successfully loaded
shared lib "dw_mdm.dll" version 401 successfully loaded
shared lib "dw_rndrt.dll" version 401 successfully loaded
shared lib "dw_abp.dll" version 401 successfully loaded
shared lib "dw_sym.dll" version 401 successfully loaded
shared lib "dw_aci.dll" version 401 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3903
rdisp/dynamic_wp_check : 1
rdisp/calculateLoadAverage : 1
Mon Jun 03 13:06:11 2013
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 6438]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: write dp-profile-values into sys_adm_ext
DpIPCInit2: start server >SANOFI-PRD_PRD_03 <
DpShMCreate: sizeof(wp_adm) 42864 (2256)
DpShMCreate: sizeof(tm_adm) 5517056 (27448)
DpShMCreate: sizeof(wp_ca_adm) 64000 (64)
DpShMCreate: sizeof(appc_ca_adm) 64000 (64)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/1384064/1384080
DpShMCreate: sizeof(comm_adm) 1384080 (2744)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (296)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (80)
DpShMCreate: sizeof(vmc_adm) 0 (2160)
DpShMCreate: sizeof(wall_adm) (41664/42896/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: sizeof(j2ee_adm) 3952
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000DEB0050, size: 7174832)
DpShMCreate: allocated sys_adm at 000000000DEB0060
DpShMCreate: allocated wp_adm_list at 000000000DEB30B0
DpShMCreate: allocated wp_adm at 000000000DEB32A0
DpShMCreate: allocated tm_adm_list at 000000000DEBDA20
DpShMCreate: allocated tm_adm at 000000000DEBDA70
DpShMCreate: allocated wp_ca_adm at 000000000E400980
DpShMCreate: allocated appc_ca_adm at 000000000E410390
DpShMCreate: allocated comm_adm at 000000000E41FDA0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000E571C40
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated gw_adm at 000000000E571CF0
DpShMCreate: allocated j2ee_adm at 000000000E571D30
DpShMCreate: allocated ca_info at 000000000E572CB0
DpShMCreate: allocated wall_adm at 000000000E572D40
DpCommAttachTable: attached comm table (header=000000000E41FDA0/ft=000000000E41FDB0)
DpSysAdmIntInit: initialize sys_adm
rdisp/test_roll : roll strategy is DP_NORMAL_ROLL
dia token check not active (10 token)
MBUF state OFF
DpCommInitTable: init table for 500 entries
DpRqQInit: keep protect_queue / slots_per_queue 0 / 2001 in sys_adm
Mon Jun 03 13:06:12 2013
rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> EsILock: use spinlock for locking
<ES> InitFreeList
<ES> block size is 4096 kByte.
<ES> Info: em/initial_size_MB( 16383MB) not multiple of em/blocksize_KB( 4096KB)
<ES> Info: em/initial_size_MB rounded up to 16384MB
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 4095 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE
MPI: dynamic quotas disabled.
MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.4 3.4 4.1) [dpxxdisp.c 1706]
***LOG Q0K=> DpMsAttach, mscon ( SANOFI-PRD) [dpxxdisp.c 12674]
MBUF state LOADING
DpStartStopMsg: send start message (myname is >SANOFI-PRD_PRD_03 <)
DpStartStopMsg: start msg sent
Mon Jun 03 13:06:13 2013
CCMS: Initialized monitoring segment of size 60000000.
CCMS: Initialized CCMS Headers in the shared monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
CCMS: AlMsUpload called by wp 1024.
CCMS: AlMsUpload successful for D:\usr\sap\PRD\DVEBMGS03\log\ALMTTREE.DAT (789 MTEs).
Mon Jun 03 13:06:14 2013
CCMS: start to initalize 3.X shared alert area (first segment).
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1296]
MBUF state ACTIVE
DpWpBlksLow: max wp blocks in queue is 800 (80 %)
MBUF component UP
DpMsgProcess: 1 server in MBUF
DpAppcBlksLow: max appc blocks in queue is 500 (50 %)
Mon Jun 03 13:06:52 2013
*** ERROR => DpHdlDeadWp: W0 (pid 3440) died (severity=0, status=0) [dpxxwp.c 1727]
*** ERROR => DpHdlDeadWp: W1 (pid 3488) died (severity=0, status=0) [dpxxwp.c 1727]
*** ERROR => DpHdlDeadWp: W2 (pid 3396) died (severity=0, status=0) [dpxxwp.c 1727]
*** ERROR => DpHdlDeadWp: W3 (pid 3392) died (severity=0, status=0) [dpxxwp.c 1727]
*** ERROR => DpHdlDeadWp: W4 (pid 3384) died (severity=0, status=0) [dpxxwp.c 1727]
*** ERROR => DpHdlDeadWp: W5 (pid 3376) died (severity=0, status=0) [dpxxwp.c 1727]
*** ERROR => DpHdlDeadWp: W6 (pid 3292) died (severity=0, status=0) [dpxxwp.c 1727]
*** ERROR => DpHdlDeadWp: W7 (pid 3280) died (severity=0, status=0) [dpxxwp.c 1727]
*** ERROR => DpHdlDeadWp: W8 (pid 348) died (severity=0, status=0) [dpxxwp.c 1727]
*** ERROR => DpHdlDeadWp: W9 (pid 336) died (severity=0, status=0) [dpxxwp.c 1727]
*** ERROR => DpHdlDeadWp: W10 (pid 12) died (severity=0, status=0) [dpxxwp.c 1727]
*** ERROR => DpHdlDeadWp: W11 (pid 1900) died (severity=0, status=0) [dpxxwp.c 1727]
*** ERROR => DpHdlDeadWp: W12 (pid 2580) died (severity=0, status=0) [dpxxwp.c 1727]
*** ERROR => DpHdlDeadWp: W13 (pid 3624) died (severity=0, status=0) [dpxxwp.c 1727]
*** ERROR => DpHdlDeadWp: W14 (pid 1064) died (severity=0, status=0) [dpxxwp.c 1727]
*** ERROR => DpHdlDeadWp: W15 (pid 2668) died (severity=0, status=0) [dpxxwp.c 1727]
*** ERROR => DpHdlDeadWp: W16 (pid 3644) died (severity=0, status=0) [dpxxwp.c 1727]
*** DP_FATAL_ERROR => DpWPCheck: no more work processes
*** DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1073
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 03 13:07:02 2013
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Mon Jun 03 17:07:02 2013
========================
No Type Pid Status Cause Start Rstr Err Sem Time Program Cl User Action Table
-------------------------------------------------------------------------------------------------------------------------------
0 DIA -1 Ended no no 1 0 0 NO_ACTION
1 DIA -1 Ended no no 1 0 0 NO_ACTION
2 DIA -1 Ended no no 1 0 0 NO_ACTION
3 DIA -1 Ended no no 1 0 0 NO_ACTION
4 DIA -1 Ended no no 1 0 0 NO_ACTION
5 DIA -1 Ended no no 1 0 0 NO_ACTION
6 DIA -1 Ended no no 1 0 0 NO_ACTION
7 DIA -1 Ended no no 1 0 0 NO_ACTION
8 DIA -1 Ended no no 1 0 0 NO_ACTION
9 DIA -1 Ended no no 1 0 0 NO_ACTION
10 UPD -1 Ended no no 1 0 0 NO_ACTION
11 ENQ -1 Ended no no 1 0 0 NO_ACTION
12 BTC -1 Ended no no 1 0 0 NO_ACTION
13 BTC -1 Ended no no 1 0 0 NO_ACTION
14 BTC -1 Ended no no 1 0 0 NO_ACTION
15 SPO -1 Ended no no 1 0 0 NO_ACTION
16 UP2 -1 Ended no no 1 0 0 NO_ACTION
Dispatcher Queue Statistics Mon Jun 03 17:07:02 2013
===========================
+------+--------+--------+--------+------------+------------+
| Typ | now | high | max | writes | reads |
+------+--------+--------+--------+------------+------------+
| NOWP | 0 | 2 | 2000 | 6 | 6 |
+------+--------+--------+--------+------------+------------+
| DIA | 4 | 4 | 2000 | 4 | 0 |
+------+--------+--------+--------+------------+------------+
| UPD | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+------------+------------+
| ENQ | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+------------+------------+
| BTC | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+------------+------------+
| SPO | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+------------+------------+
| UP2 | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+------------+------------+
max_rq_id 9
wake_evt_udp_now 0
wake events total 7, udp 6 ( 85%), shm 1 ( 14%)
since last update total 7, udp 6 ( 85%), shm 1 ( 14%)
DpGetLoadAverage: la1[1] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[1] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[1] = 0.044444 / -1.000000 %
Dispatcher Load Statistics
+------+---------+---------+---------+
| Typ | LA1 | LA5 | LA15 |
+------+---------+---------+---------+
| DIA | 0.000 | 0.000 | 0.044 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[2] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[2] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[2] = 0.000000 / -1.000000 %
| UPD | 0.000 | 0.000 | 0.000 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[3] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[3] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[3] = 0.000000 / -1.000000 %
| ENQ | 0.000 | 0.000 | 0.000 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[4] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[4] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[4] = 0.000000 / -1.000000 %
| BTC | 0.000 | 0.000 | 0.000 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[5] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[5] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[5] = 0.000000 / -1.000000 %
| SPO | 0.000 | 0.000 | 0.000 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[6] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[6] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[6] = 0.000000 / -1.000000 %
| UP2 | 0.000 | 0.000 | 0.000 |
+------+---------+---------+---------+
Dump of tm_adm structure: Mon Jun 03 17:07:02 2013
=========================
Term uid man user term lastop mod wp ta a/i (modes)
RM-T19, U20, , , 13:06:14, M0, W-1, , 1/0
Workprocess Comm. Area Blocks Mon Jun 03 17:07:02 2013
=============================
Slots: 1000, Used: 1, Max: 1
+------+--------------+----------+-------------+
| id | owner | pid | eyecatcher |
+------+--------------+----------+-------------+
| 0 | DISPATCHER | -1 | 0xdeadbeef |
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1073
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 03 13:07:07 2013
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >SANOFI-PRD_PRD_03 < (normal)
DpJ2eeDisableRestart
DpMBufRead: read server list from MBUF (1 entries)
DpMBufMod: name [SANOFI-PRD_PRD_03 ], types 191 state 3 (0x0 0x0 0x0 0x0)
DpMBufMod: call hooks for event MBUF_DPEVT_DSTATE (5->3)
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 60
AdCallRegisteredCvtToExt: opcode 60 call 00000001417BB0C0
AdCallRegisteredCvtToExt: opcode 60 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 00000001417BBF50
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 00000001417BBF50
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 00000001417BBF50
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 00000001417BBF50
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 00000001417BBF50
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 00000001417BBF50
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 00000001417BBF50
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 00000001417BBF50
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 00000001417BBF50
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 00000001417BBF50
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
DpWpBlksLow: wp_blks_in_queue/limit/max = 1/800/1000
DpLockWpBlkEx: lock wp ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqIPutIntoQ: put elem in queue DIA, elems=5
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 10)
MBUF server state SHUTDOWN
DpModState: change state STARTING -> SHUTDOWN
NiBufSend starting
NiIWrite: hdl 17 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
DpHalt: switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
DpHalt: stop work processes
DpHalt: stop gateway
killing process (2900) (SOFT_KILL)
DpHalt: stop icman
killing process (3444) (SOFT_KILL)
DpHalt: terminate gui connections
send SHUTDOWN to REM TM 19
DpWpBlksLow: wp_blks_in_queue/limit/max = 2/800/1000
DpLockWpBlkEx: lock wp ca_blk 2
return errno (-17) to T19
DpTmSend: errormsg without overhead: use mode 0
NiBufIAlloc: malloc NiBufadm, to 0 bytes
DpTmSend: try to send 14 bytes to T19/M0
NiBufSend starting
NiIWrite: hdl 25 sent data (wrt=14,pac=1,MESG_IO)
REL WP ca_blk 2
set status of T19 to TM_DISCONNECTED
NiBufISelUpdate: new MODE -- (r-) for hdl 25 in set0
SiSelNSet: set events of sock 1060 to: ---
NiBufISelRemove: remove hdl 25 from set0
SiSelNRemove: removed sock 1060 (pos=3)
SiSelNRemove: removed sock 1060
NiSelIRemove: removed hdl 25
DpDelSocketInfo: del info for nihdl 25 (pos/type=3/3)
NiICloseHandle: shutdown and close hdl 25/sock 1060
NiBufIClose: clear extension for hdl 25
dp_tm_adm[19].stat = DP_SLOT_FREE
DpGetSchedule: next schedule 1370279232/707000
DpGetSchedule: no schedule found
DpITmSlotRelease: release slot 19
DpListRemove: remove elem 19 from tmadm_inuse_list
DpListRemove: 19 elems in tmadm_inuse_list
DpListInsert: insert elem 19 into tmadm_free_list (at begin)
DpListInsert: 182 elems in tmadm_free_list
DpHalt: wait for end of work processes
DpHalt: wait for end of gateway
[DpProcDied] Process lives (PID:2900 HANDLE:936)
DpHalt: waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1073
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 03 13:07:08 2013
NiISelect: TIMEOUT occured (1000ms)
*** ERROR => [DpProcDied] Process died (PID:2900 HANDLE:936 rc:0x0) [dpnttool2.c 147]
DpHalt: wait for end of icman
[DpProcDied] Process lives (PID:3444 HANDLE:944)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1073
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 03 13:07:09 2013
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3444 HANDLE:944)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1073
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 03 13:07:10 2013
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3444 HANDLE:944)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1073
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 03 13:07:11 2013
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3444 HANDLE:944)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1073
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 03 13:07:12 2013
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3444 HANDLE:944)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1073
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 03 13:07:13 2013
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3444 HANDLE:944)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1073
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 03 13:07:14 2013
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3444 HANDLE:944)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1073
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 03 13:07:15 2013
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3444 HANDLE:944)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1073
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 03 13:07:16 2013
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3444 HANDLE:944)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1073
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 03 13:07:17 2013
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3444 HANDLE:944)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1073
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 03 13:07:18 2013
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3444 HANDLE:944)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1073
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 03 13:07:19 2013
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3444 HANDLE:944)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1073
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 03 13:07:20 2013
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3444 HANDLE:944)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1073
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 03 13:07:21 2013
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3444 HANDLE:944)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1073
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 03 13:07:22 2013
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3444 HANDLE:944)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1073
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 03 13:07:23 2013
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3444 HANDLE:944)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1073
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 03 13:07:24 2013
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3444 HANDLE:944)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1073
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 03 13:07:25 2013
NiISelect: TIMEOUT occured (1000ms)
*** ERROR => [DpProcDied] Process died (PID:3444 HANDLE:944 rc:0x0) [dpnttool2.c 147]
DpStartStopMsg: send stop message (myname is >SANOFI-PRD_PRD_03 <)
DpStartStopMsg: Write AD_STARTSTOP message with type= 0, name=SANOFI-PRD_PRD_03 , sapsysnr= 3, hostname=SANOFI-PRD
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 60
AdCallRegisteredCvtToExt: opcode 60 call 00000001417BB0C0
AdCallRegisteredCvtToExt: opcode 60 exit rc=SAP_O_K
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 4
AdCallRegisteredCvtToExt: opcode 4 call 00000001417B6D00
AdCallRegisteredCvtToExt: opcode 4 exit rc=SAP_O_K
DpConvertRequest: net size = 189 bytes
NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes
NiBufSend starting
NiIWrite: hdl 17 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
MsISnd2: send msg (ms hdr/msg 110/452 bytes) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes
NiBufIAlloc: malloc NIBUF-IN, to 32110 bytes
NiIRead: hdl 17 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 17
NiBufReceive starting
MsINiRead: received 274 bytes
MsIReceive: received msg (ms hdr/msg 110/164 bytes), flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 17 recv would block (errno=EAGAIN)
NiIRead: read for hdl 17 timed out (0ms)
DpHalt: more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 17 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
MsISnd2: send msg (ms hdr/msg 110/4 bytes) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes
NiIRead: hdl 17 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 17 (r)
NiBufIAlloc: malloc NIBUF-IN, to 32110 bytes
NiIRead: hdl 17 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 17
NiBufReceive starting
MsINiRead: received 114 bytes
MsIReceive: received msg (ms hdr/msg 110/4 bytes), flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsISendKeepalive : keepalive sent to message server
NiIRead: hdl 17 recv would block (errno=EAGAIN)
Mon Jun 03 13:07:26 2013
NiIPeek: peek for hdl 17 timed out (r; 1000ms)
NiIRead: read for hdl 17 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
DpHalt: detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 13071]
NiBufSend starting
NiIWrite: hdl 17 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server (SANOFI-PRD / 3903)
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 17 in set0
SiSelNSet: set events of sock 932 to: ---
NiBufISelRemove: remove hdl 17 from set0
SiSelNRemove: removed sock 932 (pos=2)
SiSelNRemove: removed sock 932
NiSelIRemove: removed hdl 17
DpDelSocketInfo: del info for nihdl 17 (pos/type=2/4)
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 60
AdCallRegisteredCvtToExt: opcode 60 call 00000001417BB0C0
AdCallRegisteredCvtToExt: opcode 60 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 00000001417BBF50
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 00000001417BBF50
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
DpWpBlksLow: wp_blks_in_queue/limit/max = 2/800/1000
DpLockWpBlkEx: lock wp ca_blk 2
make DISP owner of wp_ca_blk 2
DpRqIPutIntoQ: put elem in queue DIA, elems=6
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 13)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 17/sock 932
NiBufIClose: clear extension for hdl 17
MsIDetach: detach MS-system (SANOFI-PRD / 3903)
DpHalt: cleanup EM
EsCleanup( )
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
Mon Jun 03 13:07:27 2013
***LOG Q05=> DpHalt, DPStop ( 4032) [dpxxdisp.c 11581]
DpHalt: Good Bye .....
here is the dev_w0
i change the profile parameter to dbs/ada/schema = SAPR3
---------------------------------------------------
trc file: "dev_w0", trc level: 1, release: "720"
---------------------------------------------------
*
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS all, MJ
*
M sysno 03
M sid PRD
M systemid 562 (PC with Windows NT)
M relno 7200
M patchlevel 0
M patchno 401
M intno 20020600
M make multithreaded, Unicode, 64 bit, optimized
M profile \\SANOFI-PRD\sapmnt\PRD\SYS\profile\PRD_DVEBMGS03_SANOFI-PRD
M pid 3440
M
M kernel runs with dp version 138000(ext=119000) (@(#) DPLIB-INT-VERSION-138000-UC)
M length of sys_adm_ext is 588 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 3440) [dpxxdisp.c 1382]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpIPCInit2: read dp-profile-values from sys_adm_ext
M DpShMCreate: sizeof(wp_adm) 42864 (2256)
M DpShMCreate: sizeof(tm_adm) 5517056 (27448)
M DpShMCreate: sizeof(wp_ca_adm) 64000 (64)
M DpShMCreate: sizeof(appc_ca_adm) 64000 (64)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/1384064/1384080
M DpShMCreate: sizeof(comm_adm) 1384080 (2744)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (296)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (80)
M DpShMCreate: sizeof(vmc_adm) 0 (2160)
M DpShMCreate: sizeof(wall_adm) (41664/42896/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: sizeof(j2ee_adm) 3952
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000FD60050, size: 7174832)
M DpShMCreate: allocated sys_adm at 000000000FD60060
M DpShMCreate: allocated wp_adm_list at 000000000FD630B0
M DpShMCreate: allocated wp_adm at 000000000FD632A0
M DpShMCreate: allocated tm_adm_list at 000000000FD6DA20
M DpShMCreate: allocated tm_adm at 000000000FD6DA70
M DpShMCreate: allocated wp_ca_adm at 00000000102B0980
M DpShMCreate: allocated appc_ca_adm at 00000000102C0390
M DpShMCreate: allocated comm_adm at 00000000102CFDA0
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 0000000010421C40
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated gw_adm at 0000000010421CF0
M DpShMCreate: allocated j2ee_adm at 0000000010421D30
M DpShMCreate: allocated ca_info at 0000000010422CB0
M DpShMCreate: allocated wall_adm at 0000000010422D40
M DpCommAttachTable: attached comm table (header=00000000102CFDA0/ft=00000000102CFDB0)
M DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 from sys_adm
M rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X <ES> EsILock: use spinlock for locking
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
X mm.dump: set maximum dump mem to 96 MB
M DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE
M
M Mon Jun 03 13:06:14 2013
M ThStart: taskhandler started
M ThInit: initializing DIA work process W0
M
M Mon Jun 03 13:06:17 2013
M ThInit: running on host SANOFI-PRD
M
M Mon Jun 03 13:06:18 2013
M calling db_connect ...
B Loading DB library 'D:\usr\sap\PRD\DVEBMGS03\exe\dbsdbslib.dll' ...
B Library 'D:\usr\sap\PRD\DVEBMGS03\exe\dbsdbslib.dll' loaded
B Version of 'D:\usr\sap\PRD\DVEBMGS03\exe\dbsdbslib.dll' is "720.00", patchlevel (0.430)
C
C DBSDBSLIB : version 720.00, patch 0.430 (Make PL 0.430)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C (0.430) Getdbobjsize with not existing tables (note 1861680)
C (0.426) File system counter access for R3szchk optimized (note 1606260)
C (0.324) Signal 11 after out of memory (note 1781592)
C (0.212) Call TH callback after cancel (note 1692560)
C (0.210) Init length of tablename for describe (note 1678130)
C (0.200) Take care of warnings during database connect (note 1600066)
C (0.117) Define a primary key on the temp tables for R3szchk (note 1606260)
C (0.114) Support of MaxDB 7.8 and 7.9 (note 1653058)
C (0.103) Close all lob locators at end of the transaction (note 1626591)
C (0.101) Fix for unknown table __TABLE_SIZES_ (R3szchk) (note 1619504)
C
C
C Loading SQLDBC client runtime ...
C
C Mon Jun 03 13:06:19 2013
C SQLDBC Module : D:\sapdb\clients\PRD\pgm\libSQLDBC77.dll
C SQLDBC SDK : SQLDBC.H 7.8.2 BUILD 023-121-242-871
C SQLDBC Runtime : libSQLDBC 7.8.2 BUILD 023-121-242-871
C SQLDBC client runtime is MaxDB 7.8.2.023 CL 242871
C SQLDBC supports new DECIMAL interface : 1
C SQLDBC supports VARIABLE INPUT data : 1
C SQLDBC supports VARIABLE OUTPUT data : 1
C SQLDBC supports Multiple Streams : 1
C SQLDBC supports LOB LOCATOR KEEPALIVE : 1
C SQLDBC supports LOB LOCATOR COPY : 1
C SQLDBC supports BULK SELECT with LOBS : 1
C SQLDBC supports BATCH STREAM : 1
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C Attach to SAP DB : Kernel 7.8.02 Build 023-121-242-871
C Database release is SAP DB 7.8.02.023
C INFO : Database 'PRD' instance is running on 'SANOFI-PRD'
C DB supports UPSERT SQL syntax : 1
C DB supports new EXPAND syntax : 1
C DB supports LOB locators : 1
C DB uses MVCC support : 0
C DB max. input host variables : 2000
C DB max. statement length : 65535
C UPSERT is disabled for : WBCROSSGT
C INFO : SAP DB Packet_Size = 131072
C INFO : SAP DB Min_Reply_Size = 4096
C INFO : SAP DB Comm_Size = 126976
C INFO : DBSL buffer size = 126976
C INFO : SAP DB MaxLocks = 300000
C INFO : Connect to DB as 'SAPPRD'
C *** ERROR => the connected user (SAPPRD) does not work with the right user/schema
[dbslsdb.cpp 5443]
C *** ERROR => application has to work with schema SAPR3 (dbs/ada/schema)
[dbslsdb.cpp 5445]
C Disconnecting from connection 0 ...
C Now I'm disconnected from MaxDB
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1484]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 11318]
M
M Info for wp 0
M
M pid = 3440
M severity = 0
M status = 0
M stat = WP_NEW
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M req.req_info =
M req.tid = -1
M req.uid = 4294967295
M req.mode = 255
M req.len = 0
M req.rq_id = 65535
M req.rq_source =
M last_tid = 0
M last_uid = 0
M last_mode = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M ThIErrHandle: current request:
M
M -IN-- sender_id ? tid -1 wp_ca_blk -1 wp_id -1
M -IN-- action - uid -1 appc_ca_blk -1 type -
M -IN-- new_stat NO_CHANGE mode 255 len 0 rq_id -1
M
M *****************************************************************************
M *
M * LOCATION SAP-Server SANOFI-PRD_PRD_03 on host SANOFI-PRD (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Mon Jun 03 13:06:19 2013
M * RELEASE 720
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 11599
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrBtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: hook >ThrBtcCallLgCl< o.k.
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 867]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 303]
M ThIErrHandle: entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workp. 0 3440) [dpnttool.c 339]
Regards,
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi
have you check Reagan Benjamin's answer?
What schema environment variable is stick to sapservicePRD user?
Let us know
a
Hi Alejandro
I would start by checking out the 'SAPPRD' user.
C INFO : Connect to DB as 'SAPPRD'
C *** ERROR => the connected user (SAPPRD) does not work with the right user/schema
[dbslsdb.cpp 5443]
C *** ERROR => application has to work with schema SAPR3 (dbs/ada/schema)
[dbslsdb.cpp 5445]
C Disconnecting from connection 0 ...
I would check to make sure this is a valid User ID, does it have the correct password, does it have the authorizations needed to connect to the database, does it have the correct Default schema.
Ken
Hi Ken,
Below note will be helpful
Note 129352 - Homogeneous system copy with MaxDB (SAP DB)
Thanks,
Venkat
Hi Alejandro,
From the log you can see the below points.
1. R3trans -d log
It shows the return code as 0012 which means "Fatal errors have occurred, such as errors while reading or writing a file or unexpected errors within the database interface, in particular database problems."
Database is not connected. May be due to network issue.
2. dev_disp log
The log shows
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 6393]
3. dev_w0 log
The log shows the following error
C *** ERROR => the connected user (SAPPRD) does not work with the right user/schema
[dbslsdb.cpp 5443]
C *** ERROR => application has to work with schema SAPR3 (dbs/ada/schema)
[dbslsdb.cpp 5445]
Which means the ops$ mechanism is not working. Check whether the OS user ops$<SID>adm is available or not.
Hope this helps.
Regards,
Rajkumar
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Alejandro,
1. Run the command R3trans -d and paste the trans.log
2. Check whether the database is up or not
3. Paste the logs for dev_disp , std_server0 and dev_server0
With Regards
Ashutosh Chaturvedi
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Alejandro,
Please check whether your database is online? check the log file area (full or not)
regards
karthik
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hello
Please provide the dev_w0 trace file
Regards
RB
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Alejandro,
Can you add here the dev_w0 log and r3 trans -d
Regards,
Simbhu
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hello thanks for your help,
here is the R3trans -d
C:\jjj>R3trans -d
This is R3trans version 6.23 (release 720 - 31.10.12 - 20:12:06).
unicode enabled version
R3trans=>sapparam(1c): No Profile used.
R3trans=>sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
2EETW000 sap_dext called with msgnr "2":
2EETW000 ---- db call info ----
2EETW000 function: db_ntab
2EETW000 fcode: NT_RDTDESCR
2EETW000 tabname: TADIR
2EETW000 len (char): 5
2EETW000 key: TADIR
2EETW000 retcode: 2
R3trans finished (0012).
and the dec_w0
---------------------------------------------------
trc file: "dev_w0", trc level: 1, release: "720"
---------------------------------------------------
*
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS all, MJ
*
M sysno 03
M sid PRD
M systemid 562 (PC with Windows NT)
M relno 7200
M patchlevel 0
M patchno 401
M intno 20020600
M make multithreaded, Unicode, 64 bit, optimized
M profile \\SANOFI-PRD\sapmnt\PRD\SYS\profile\PRD_DVEBMGS03_SANOFI-PRD
M pid 1816
M
M kernel runs with dp version 138000(ext=119000) (@(#) DPLIB-INT-VERSION-138000-UC)
M length of sys_adm_ext is 588 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 1816) [dpxxdisp.c 1382]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpIPCInit2: read dp-profile-values from sys_adm_ext
M DpShMCreate: sizeof(wp_adm) 42864 (2256)
M DpShMCreate: sizeof(tm_adm) 5517056 (27448)
M DpShMCreate: sizeof(wp_ca_adm) 64000 (64)
M DpShMCreate: sizeof(appc_ca_adm) 64000 (64)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/1384064/1384080
M DpShMCreate: sizeof(comm_adm) 1384080 (2744)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (296)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (80)
M DpShMCreate: sizeof(vmc_adm) 0 (2160)
M DpShMCreate: sizeof(wall_adm) (41664/42896/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: sizeof(j2ee_adm) 3952
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000FE60050, size: 7174832)
M DpShMCreate: allocated sys_adm at 000000000FE60060
M DpShMCreate: allocated wp_adm_list at 000000000FE630B0
M DpShMCreate: allocated wp_adm at 000000000FE632A0
M DpShMCreate: allocated tm_adm_list at 000000000FE6DA20
M DpShMCreate: allocated tm_adm at 000000000FE6DA70
M DpShMCreate: allocated wp_ca_adm at 00000000103B0980
M DpShMCreate: allocated appc_ca_adm at 00000000103C0390
M DpShMCreate: allocated comm_adm at 00000000103CFDA0
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 0000000010521C40
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated gw_adm at 0000000010521CF0
M DpShMCreate: allocated j2ee_adm at 0000000010521D30
M DpShMCreate: allocated ca_info at 0000000010522CB0
M DpShMCreate: allocated wall_adm at 0000000010522D40
M DpCommAttachTable: attached comm table (header=00000000103CFDA0/ft=00000000103CFDB0)
M DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 from sys_adm
M rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X <ES> EsILock: use spinlock for locking
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
X mm.dump: set maximum dump mem to 96 MB
M DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE
M ThStart: taskhandler started
M ThInit: initializing DIA work process W0
M
M Sun Jun 02 08:02:51 2013
M ThInit: running on host SANOFI-PRD
M calling db_connect ...
B Loading DB library 'D:\usr\sap\PRD\DVEBMGS03\exe\dbsdbslib.dll' ...
B Library 'D:\usr\sap\PRD\DVEBMGS03\exe\dbsdbslib.dll' loaded
B Version of 'D:\usr\sap\PRD\DVEBMGS03\exe\dbsdbslib.dll' is "720.00", patchlevel (0.430)
C
C DBSDBSLIB : version 720.00, patch 0.430 (Make PL 0.430)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C (0.430) Getdbobjsize with not existing tables (note 1861680)
C (0.426) File system counter access for R3szchk optimized (note 1606260)
C (0.324) Signal 11 after out of memory (note 1781592)
C (0.212) Call TH callback after cancel (note 1692560)
C (0.210) Init length of tablename for describe (note 1678130)
C (0.200) Take care of warnings during database connect (note 1600066)
C (0.117) Define a primary key on the temp tables for R3szchk (note 1606260)
C (0.114) Support of MaxDB 7.8 and 7.9 (note 1653058)
C (0.103) Close all lob locators at end of the transaction (note 1626591)
C (0.101) Fix for unknown table __TABLE_SIZES_ (R3szchk) (note 1619504)
C
C
C Loading SQLDBC client runtime ...
C SQLDBC Module : D:\sapdb\clients\PRD\pgm\libSQLDBC77.dll
C SQLDBC SDK : SQLDBC.H 7.8.2 BUILD 023-121-242-871
C SQLDBC Runtime : libSQLDBC 7.8.2 BUILD 023-121-242-871
C SQLDBC client runtime is MaxDB 7.8.2.023 CL 242871
C SQLDBC supports new DECIMAL interface : 1
C SQLDBC supports VARIABLE INPUT data : 1
C SQLDBC supports VARIABLE OUTPUT data : 1
C SQLDBC supports Multiple Streams : 1
C SQLDBC supports LOB LOCATOR KEEPALIVE : 1
C SQLDBC supports LOB LOCATOR COPY : 1
C SQLDBC supports BULK SELECT with LOBS : 1
C SQLDBC supports BATCH STREAM : 1
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C Attach to SAP DB : Kernel 7.8.02 Build 023-121-242-871
C Database release is SAP DB 7.8.02.023
C INFO : Database 'PRD' instance is running on 'SANOFI-PRD'
C DB supports UPSERT SQL syntax : 1
C DB supports new EXPAND syntax : 1
C DB supports LOB locators : 1
C DB uses MVCC support : 0
C DB max. input host variables : 2000
C DB max. statement length : 65535
C UPSERT is disabled for : WBCROSSGT
C INFO : SAP DB Packet_Size = 131072
C INFO : SAP DB Min_Reply_Size = 4096
C INFO : SAP DB Comm_Size = 126976
C INFO : DBSL buffer size = 126976
C INFO : SAP DB MaxLocks = 300000
C INFO : Connect to DB as 'SAPPRD'
C *** ERROR => the connected user (SAPPRD) does not work with the right user/schema
[dbslsdb.cpp 5443]
C *** ERROR => application has to work with schema SAPR3 (dbs/ada/schema)
[dbslsdb.cpp 5445]
C Disconnecting from connection 0 ...
C Now I'm disconnected from MaxDB
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1484]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 11318]
M
M Info for wp 0
M
M pid = 1816
M severity = 0
M status = 0
M stat = WP_NEW
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M req.req_info =
M req.tid = -1
M req.uid = 4294967295
M req.mode = 255
M req.len = 0
M req.rq_id = 65535
M req.rq_source =
M last_tid = 0
M last_uid = 0
M last_mode = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M ThIErrHandle: current request:
M
M -IN-- sender_id ? tid -1 wp_ca_blk -1 wp_id -1
M -IN-- action - uid -1 appc_ca_blk -1 type -
M -IN-- new_stat NO_CHANGE mode 255 len 0 rq_id -1
M
M *****************************************************************************
M *
M * LOCATION SAP-Server SANOFI-PRD_PRD_03 on host SANOFI-PRD (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Sun Jun 02 08:02:51 2013
M * RELEASE 720
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 11599
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrBtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: hook >ThrBtcCallLgCl< o.k.
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 867]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 303]
M ThIErrHandle: entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workp. 0 1816) [dpnttool.c 339]
Regards,
Alejandro.
Hello
This is what the error is :
C *** ERROR => the connected user (SAPPRD) does not work with the right user/schema
[dbslsdb.cpp 5443]
C *** ERROR => application has to work with schema SAPR3 (dbs/ada/schema)
[dbslsdb.cpp 5445]
C Disconnecting from connection 0 ...
C Now I'm disconnected from MaxDB
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1484]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 11318]
Who is the schema owner ? is it SAPR3 or SAPPRD ?
If it is SAPPRD change the profile parameter dbs/ada/schema to SAPPRD
Good Luck
RB
User | Count |
---|---|
90 | |
10 | |
10 | |
10 | |
7 | |
7 | |
6 | |
5 | |
4 | |
3 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.