on 05-23-2013 10:49 PM
Hi
I met a problem.
In MMC the status of disp+work.exe is yellow.
after ICM activated, i got a error I restarted the service but not work.
ERROR:
**********************************************************************************************************************
**** ERROR file opened at 20130522 202530 W. Europe Daylight Time, SAP-REL 720,0,118 RFC-VER 3 1296486 MT-SL
T:2440 Error in program 'mmc': ======> SAP_CMINIT3 : rc=20 > Connect to SAP gateway failed
Connect_PM GWHOST=sap, GWSERV=sapgw00, SYSNR=00
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR timeout occured
TIME Wed May 22 20:25:30 2013
RELEASE 720
COMPONENT NI (network interface)
VERSION 40
RC -5
MODULE gwxx.c
LINE 646
DETAIL timeout 60000 msecs
SYSTEM CALL GwRead
COUNTER 1
**** ERROR file opened at 20130522 205954 W. Europe Daylight Time, SAP-REL 720,0,118 RFC-VER 3 1296486 MT-SL
T:3660 Error in program 'mmc': ======> SAP_CMINIT3 : rc=20 > Connect to SAP gateway failed
Connect_PM GWHOST=sap, GWSERV=sapgw00, SYSNR=00
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR timeout occured
TIME Wed May 22 20:59:54 2013
RELEASE 720
COMPONENT NI (network interface)
VERSION 40
RC -5
MODULE gwxx.c
LINE 646
DETAIL timeout 60000 msecs
SYSTEM CALL GwRead
COUNTER 1
**** ERROR file opened at 20130522 210147 W. Europe Daylight Time, SAP-REL 720,0,118 RFC-VER 3 1296486 MT-SL
T:2396 Error in program 'mmc': ======> SAP_CMINIT3 : rc=20 > Connect to SAP gateway failed
Connect_PM GWHOST=sap, GWSERV=sapgw00, SYSNR=00
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR timeout occured
TIME Wed May 22 21:01:47 2013
RELEASE 720
COMPONENT NI (network interface)
VERSION 40
RC -5
MODULE gwxx.c
LINE 646
DETAIL timeout 60000 msecs
SYSTEM CALL GwRead
COUNTER 1
**********************************************************************************************************************
Regards
Sascha
Hi
I didn't changed anything in my system. I just activated ICM and install Firefox.
My ipconfig:
IP : 10.0.0.7
Domain : sap.testserver.com
Details:
Base Server : Server 2012 (10.0.0.4)
Hyper-V System : win 2008 R2 Server (SAP NW 7 Trial)
*******************************************************************************************************************
---------------------------------------------------
trc file: "dev_ms", trc level: 1, release: "720"
---------------------------------------------------
[Thr 660] Fri May 24 19:28:01 2013
[Thr 660] ms/http_max_clients = 500 -> 500
[Thr 660] MsSSetTrcLog: trc logging active, max size = 52428800 bytes
systemid 562 (PC with Windows NT)
relno 7200
patchlevel 0
patchno 101
intno 20020600
make multithreaded, Unicode, 64 bit, optimized
pid 2668
[Thr 660] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 2668) [msxxserv.c 2278]
[Thr 660] load acl file = E:\usr\sap\NSP\SYS\global\ms_acl_info.DAT
[Thr 660] MsGetOwnIpAddr: my host addresses are :
[Thr 660] 1 : [10.0.0.7] sap.testserver.com (HOSTNAME)
[Thr 660] 2 : [127.0.0.1] sap.testserver.com (LOCALHOST)
[Thr 660] MsHttpInit: full qualified hostname = sap.testserver.com
[Thr 660] HTTP logging is switch off
[Thr 660] set HTTP state to LISTEN
[Thr 660] *** HTTP port 8100 state LISTEN ***
[Thr 660] MsHttpOwnDomain: own domain[1] = testserver.com
[Thr 660] *** I listen to internal port 3900 (3900) ***
[Thr 660] *** HTTP port 8100 state LISTEN ***
[Thr 660] CUSTOMER KEY: >Q0227601364<
[Thr 660] build version=720.2011.10.26
*********************************************************************************************************************
---------------------------------------------------
trc file: "dev_disp", trc level: 1, release: "720"
---------------------------------------------------
sysno 00
sid NSP
systemid 562 (PC with Windows NT)
relno 7200
patchlevel 0
patchno 214
intno 20020600
make multithreaded, Unicode, 64 bit, optimized
profile \\sap\sapmnt\NSP\SYS\profile\NSP_DVEBMGS00_sap
pid 3004
kernel runs with dp version 134000(ext=119000) (@(#) DPLIB-INT-VERSION-134000-UC)
length of sys_adm_ext is 588 bytes
*** SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 3004) [dpxxdisp.c 1315]
shared lib "dw_xml.dll" version 214 successfully loaded
shared lib "dw_xtc.dll" version 214 successfully loaded
shared lib "dw_stl.dll" version 214 successfully loaded
shared lib "dw_gui.dll" version 214 successfully loaded
shared lib "dw_mdm.dll" version 214 successfully loaded
shared lib "dw_rndrt.dll" version 214 successfully loaded
shared lib "dw_abp.dll" version 214 successfully loaded
shared lib "dw_sym.dll" version 214 successfully loaded
shared lib "dw_aci.dll" version 214 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
rdisp/dynamic_wp_check : 1
rdisp/calculateLoadAverage : 1
Fri May 24 19:28:09 2013
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 6423]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: write dp-profile-values into sys_adm_ext
DpIPCInit2: start server >sap_NSP_00 <
DpShMCreate: sizeof(wp_adm) 31696 (2264)
DpShMCreate: sizeof(tm_adm) 5517056 (27448)
DpShMCreate: sizeof(wp_ca_adm) 64000 (64)
DpShMCreate: sizeof(appc_ca_adm) 64000 (64)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/1384064/1384080
DpShMCreate: sizeof(comm_adm) 1384080 (2744)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (296)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (80)
DpShMCreate: sizeof(vmc_adm) 0 (2152)
DpShMCreate: sizeof(wall_adm) (41664/42896/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: sizeof(j2ee_adm) 3952
DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000007C30050, size: 7163600)
DpShMCreate: allocated sys_adm at 0000000007C30060
DpShMCreate: allocated wp_adm_list at 0000000007C33070
DpShMCreate: allocated wp_adm at 0000000007C33260
DpShMCreate: allocated tm_adm_list at 0000000007C3AE40
DpShMCreate: allocated tm_adm at 0000000007C3AE90
DpShMCreate: allocated wp_ca_adm at 000000000817DDA0
DpShMCreate: allocated appc_ca_adm at 000000000818D7B0
DpShMCreate: allocated comm_adm at 000000000819D1C0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 00000000082EF060
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated gw_adm at 00000000082EF110
DpShMCreate: allocated j2ee_adm at 00000000082EF150
DpShMCreate: allocated ca_info at 00000000082F00D0
DpShMCreate: allocated wall_adm at 00000000082F0160
DpCommAttachTable: attached comm table (header=000000000819D1C0/ft=000000000819D1D0)
DpSysAdmIntInit: initialize sys_adm
rdisp/test_roll : roll strategy is DP_NORMAL_ROLL
dia token check not active (6 token)
MBUF state OFF
DpCommInitTable: init table for 500 entries
DpRqQInit: keep protect_queue / slots_per_queue 0 / 2001 in sys_adm
rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> EsILock: use spinlock for locking
<ES> InitFreeList
<ES> block size is 4096 kByte.
<ES> Info: em/initial_size_MB( 4095MB) not multiple of em/blocksize_KB( 4096KB)
<ES> Info: em/initial_size_MB rounded up to 4096MB
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 1023 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE
MPI: dynamic quotas disabled.
MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
Fri May 24 19:28:10 2013
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.4 3.4 4.1) [dpxxdisp.c 1701]
***LOG Q0K=> DpMsAttach, mscon ( sap) [dpxxdisp.c 12514]
MBUF state LOADING
DpStartStopMsg: send start message (myname is >sap_NSP_00 <)
DpStartStopMsg: start msg sent
CCMS uses Shared Memory Key 73 for monitoring.
CCMS: Initalized shared memory of size 60000000 for monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
CCMS: AlMsUpload called by wp 1024.
Fri May 24 19:28:11 2013
CCMS: AlMsUpload successful for E:\usr\sap\NSP\DVEBMGS00\log\ALMTTREE.DAT (616 MTEs).
CCMS: start to initalize 3.X shared alert area (first segment).
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1296]
MBUF state ACTIVE
DpWpBlksLow: max wp blocks in queue is 800 (80 %)
MBUF component UP
DpMsgProcess: 1 server in MBUF
DpAppcBlksLow: max appc blocks in queue is 500 (50 %)
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Thanks guy, I solved problem. the problem was provide/check dev_ms, dev_disp, dev_w0
Thanks Again
Regards
Sascha
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
I have the same problem
---------------------------------------------------
trc file: "dev_disp", trc level: 1, release: "720"
---------------------------------------------------
sysno 00
sid NSP
systemid 562 (PC with Windows NT)
relno 7200
patchlevel 0
patchno 214
intno 20020600
make multithreaded, Unicode, 64 bit, optimized
profile \\Ibrahim-PC\sapmnt\NSP\SYS\profile\NSP_DVEBMGS00_Ibrahim-PC
pid 3644
kernel runs with dp version 134000(ext=119000) (@(#) DPLIB-INT-VERSION-134000-UC)
length of sys_adm_ext is 588 bytes
*** SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 3644) [dpxxdisp.c 1315]
shared lib "dw_xml.dll" version 214 successfully loaded
shared lib "dw_xtc.dll" version 214 successfully loaded
shared lib "dw_stl.dll" version 214 successfully loaded
shared lib "dw_gui.dll" version 214 successfully loaded
shared lib "dw_mdm.dll" version 214 successfully loaded
shared lib "dw_rndrt.dll" version 214 successfully loaded
shared lib "dw_abp.dll" version 214 successfully loaded
shared lib "dw_sym.dll" version 214 successfully loaded
shared lib "dw_aci.dll" version 214 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
rdisp/dynamic_wp_check : 1
rdisp/calculateLoadAverage : 1
Mon Apr 28 19:38:24 2014
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 6423]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: write dp-profile-values into sys_adm_ext
DpIPCInit2: start server >Ibrahim-PC_NSP_00 <
DpShMCreate: sizeof(wp_adm) 31696 (2264)
DpShMCreate: sizeof(tm_adm) 5517056 (27448)
DpShMCreate: sizeof(wp_ca_adm) 64000 (64)
DpShMCreate: sizeof(appc_ca_adm) 64000 (64)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/1384064/1384080
DpShMCreate: sizeof(comm_adm) 1384080 (2744)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (296)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (80)
DpShMCreate: sizeof(vmc_adm) 0 (2152)
DpShMCreate: sizeof(wall_adm) (41664/42896/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: sizeof(j2ee_adm) 3952
DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000007920050, size: 7163600)
DpShMCreate: allocated sys_adm at 0000000007920060
DpShMCreate: allocated wp_adm_list at 0000000007923070
DpShMCreate: allocated wp_adm at 0000000007923260
DpShMCreate: allocated tm_adm_list at 000000000792AE40
DpShMCreate: allocated tm_adm at 000000000792AE90
DpShMCreate: allocated wp_ca_adm at 0000000007E6DDA0
DpShMCreate: allocated appc_ca_adm at 0000000007E7D7B0
DpShMCreate: allocated comm_adm at 0000000007E8D1C0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0000000007FDF060
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated gw_adm at 0000000007FDF110
DpShMCreate: allocated j2ee_adm at 0000000007FDF150
DpShMCreate: allocated ca_info at 0000000007FE00D0
DpShMCreate: allocated wall_adm at 0000000007FE0160
DpCommAttachTable: attached comm table (header=0000000007E8D1C0/ft=0000000007E8D1D0)
DpSysAdmIntInit: initialize sys_adm
rdisp/test_roll : roll strategy is DP_NORMAL_ROLL
dia token check not active (6 token)
MBUF state OFF
DpCommInitTable: init table for 500 entries
DpRqQInit: keep protect_queue / slots_per_queue 0 / 2001 in sys_adm
rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> EsILock: use spinlock for locking
<ES> InitFreeList
<ES> block size is 4096 kByte.
<ES> Info: em/initial_size_MB( 8135MB) not multiple of em/blocksize_KB( 4096KB)
<ES> Info: em/initial_size_MB rounded up to 8136MB
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 2033 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE
MPI: dynamic quotas disabled.
MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.4 3.4 4.1) [dpxxdisp.c 1701]
***LOG Q0K=> DpMsAttach, mscon ( Ibrahim-PC) [dpxxdisp.c 12514]
MBUF state LOADING
DpStartStopMsg: send start message (myname is >Ibrahim-PC_NSP_00 <)
DpStartStopMsg: start msg sent
CCMS uses Shared Memory Key 73 for monitoring.
CCMS: Initalized shared memory of size 60000000 for monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
CCMS: AlMsUpload called by wp 1024.
CCMS: AlMsUpload successful for C:\usr\sap\NSP\DVEBMGS00\log\ALMTTREE.DAT (593 MTEs).
Mon Apr 28 19:38:25 2014
CCMS: start to initalize 3.X shared alert area (first segment).
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1296]
MBUF state ACTIVE
DpWpBlksLow: max wp blocks in queue is 800 (80 %)
MBUF component UP
DpMsgProcess: 1 server in MBUF
DpAppcBlksLow: max appc blocks in queue is 500 (50 %)
Hi Sascha Adref Yaul ,
thank you very much for your reply, you are right, it is a port problem, but how can i solve it,
I have looked for in this folder C:\Windows\System32\drivers\etc services
and no ports with 8100 or 3900 ....
sapgw98 3398/tcp
sapgw99 3399/tcp
sapdp00s 4700/tcp # SAP System Dispatcher Security Port
sapdp01s 4701/tcp # SAP System Dispatcher Security Port
sapdp02s 4702/tcp # SAP System Dispatcher Security Port
sapdp03s 4703/tcp # SAP System Dispatcher Security Port
sapdp04s 4704/tcp # SAP System Dispatcher Security Port
sapdp05s 4705/tcp # SAP System Dispatcher Security Port
can you help me please,
Best Regards .
Hi,
Did you upgrade the kernel?
Try downloading again and restart server so no services or shared memory persists.
Also check if service sapgw00 3300 exists in C:\Windows\System32\drivers\etc\services
Finally install windows vcredist_x64 package too.
Regards
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hello Sascha,
As Atul mentioned, provide/check dev_ms, dev_disp, dev_w0, ...
Regards,
Eduardo Rezende
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Sascha,
I think your system running fine but disp+work is showing Yellow??
Please make sure SAPSTARTSRV..EXE have same version in both location.kernel directory and C:/System32 folder.if possible try to restart the server once.
Then you will see Green status for Disp+work...Hope it will help.
Regards
Ashok
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Sascha,
Could you please provide dev_ms, dev_disp log.
BR
Atul
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Sascha,
Please check the entry in services file - sapgw00 33<instancenumber>/tcp
regards
karthik
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hello,
please check gateway is started or not.
Best Regards,
Yong Luo
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
101 | |
13 | |
13 | |
11 | |
11 | |
7 | |
6 | |
5 | |
4 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.