Error during managed system configuration in solman 7.1

[Former Member]

Hi Gurus,

Here I am facing one issue; please help me to solve it.

I have installed Solution Manager 7.1 SP08 and performed configuration steps, now I am doing managed system configuration. During here I have doubt..

My requirement is already all managed systems are maintained in other Solman 7.0 ehp1 SLD so I had setup sldsynch between existing SLD to this new SLD, synch job completed successfully and am able to see all systems in solman_setup managed systems but all systems as red (I hope because of product assignment etc..)

So here I have started to perform managed system configuration for one system however I am bit confused here during selection of “diagnostic agent”, am able to see only one agent (which is central SLD). How to get agent of managed system here? Do I need to select present solman agent or managed system agent?

For screens please find attachments. Thanks in advance

Thanks,

Venkat

[former_member206167]

Hi, check Thayron you OS and Smd versión combination runs, id you can, deinstall curten y DAA, download and install latest DAA frontera Marketing Place

Regards

[Former Member]

Hi All,

Thanks for your valuable help. I have solved this issue by uninstall DAA and Reinstall DAA (This time i have selected option as Register in existing SLD).

Thanks,

Venkat

[Former Member]

Hi Venkat,

SMD agents only connect to one system.

So you will have to make a choice here, or install an additional agent on your managed system.

I suggest you do the last, for a smooth transition.

Register the new agents in your new SLD and you'll see them popping up in the screen.

If you don't want to install new agents you can use the smdsetup script to register the agents in your "new" sld.

Regards,

David

[Former Member]

Hi David,

Thanks for your reply.

As per my understanding, we need to install SMD agents in all managed systems?

right now my managed system is having installed SMD (DAA), so now how to register them in solman?

one more thing is here am unable to see solution manager 7.1 agent itself? how do i see it in agent list?

Thanks a lot.

Venkat

[Former Member]

execute the script located in /usr/sap/DAA/SMDA97/script

(-help will show you the options) and point to your SLD.

The ones you should execute are smdsetup sldconf and smdsetup managingconf.

Do this for the agent on your SSM 7.1 too

[Former Member]

Hi,

As per your suggestion I am trying to register managed system SMD agent to Solution Manager 7.1. for this i have executed below commands.

smdsetup managingconf hostname:"sapms://solman hostname" port:"8101" user:"SMD_ADMIN" pwd:"XXXX"

smdsetup sldconf hostname:”solman hostname” port:”50000” user:”SLDDSUSER” pwd:”XXXX”

above commands completed successfully, but after that i tried to start DAA and it is not starting and unable to find a solution for this.

Error:

F  [Thr 47536] *** ERROR => SfEIO: SfChDir: chdir(D:\usr\sap\DAA\SMDA97/j2ee) failed (errno = 2 No such file or directory)  [sfxxlib.hpp  196]

F  [Thr 47536] *** ERROR => Operation failed: SfEIO: SfChDir: chdir(D:\usr\sap\DAA\SMDA97/j2ee) failed (errno = 2 No such file or directory)

[sfxxmain.cpp 1173]

For error details please find attached files. kindly help me to solve this issue.

Thanks,

Venkat

dev_flightrec.txt.zip

dev_smdagent.txt.zip

[Former Member]

It appears as an issue with your JVM.

You could try updating your JRE/JDK.

Or, and this is usually very easy, try reinstalling your SMD Agent.

[Former Member]

Hi Kroone,

You are right it is problem with JVM.

below is the log files. could you please help me on this to solve.

sapcpe_sapjvm_6.log: ------------------------------------------------- 2013/04/23 10:32:06 sapcpe version UC: @(#) $Id: //bas/720_REL/src/ccm/sapstart/sapxxcpe.c#25 $ SAP Command line:   0: D:\usr\sap\DAA\SYS\exe\uc\NTAMD64\sapcpe.EXE   1: pf=D:\usr\sap\DAA\SYS\profile\DAA_SMDA97_Q4DE3GSY301   2: list:D:\usr\sap\DAA\SYS\exe\jvm\NTAMD64\sapjvm_6.1.031/sapjvm_6.lst   3: source:D:\usr\sap\DAA\SYS\exe\jvm\NTAMD64\sapjvm_6.1.031 Trace level (profile): 1 *** ERROR: File-List "D:\usr\sap\DAA\SYS\exe\jvm\NTAMD64\sapjvm_6.1.031/sapjvm_6.lst" does not exist, 2, No such file or directory, [sapxxcpe.c:1320] parameter "all" is also not defined. Exit.

[Former Member]

Any help on this?

[Former Member]

Check content of D:\usr\sap\DAA\SYS\exe\jvm\NTAMD64\sapjvm_6.1.031/ directory and provide output here.

[Former Member]

Hi Roman,

Thanks for replying.

attached screen shot of it. i have changed each line with LF or CR/LF but nouse.

Please advise.

Thanks,

Venkat

[Former Member]

OK, file exists. Check permissions for sapjvm_6.lst file and all files/folders from its content. Have you sapjvm_6 folder in that location?

[Former Member]

Hi Roman,

First thing is there was no files under usr/sap/DAA/SYS/exe/jvm/NTADM64/

then i have created a folder manually with name sapjvm_6.1.031 and placed sapjvm_6.lst file changed file content lines as above attached screen.

Since i have logged in with administrator rights so no permission issues.

Note: before registering this DAA into Solman it was running fine but after executing commands to register am facing this issue.

Please help me on this.

Thanks,

Venkat

[Former Member]

Thanks for explanation. Check D:\usr\sap\DAA\SMDA<XX>\exe directory if it contains sapjvm_6 folder and sapjvm_6.lst, sapjvmmanifest.mf files. If yes copy them to D:\usr\sap\DAA\SYS\exe\jvm\NTAMD64\sapjvm_6.1.031/ direcotry. Or reinstall diagnostics agent.

[Former Member]

Thanks for quick reply i tried as you said but no luck and received below new error.

sapcpe_sapjvm_6.log:

*** ERROR: fstat D:\usr\sap\DAA\SYS\exe\jvm\NTAMD64\sapjvm_6.1.031\LF (No such file or directory), 2, No such file or directory, [sapxxcpe.c:1983]

ActualizeLocalFileOrDir: sapjvmmanifest.mf (FPM:0x0)

ActualizeLocalFile: sapjvmmanifest.mf

ActualizeLocalFileOrDir: LF (FPM:0x0)

*** ERROR: fstat D:\usr\sap\DAA\SYS\exe\jvm\NTAMD64\sapjvm_6.1.031\LF (No such file or directory), 2, No such file or directory, [sapxxcpe.c:1983]

Files scanned......:   744  214.90 MB

** All local files, which are available and defined, are up to date. **

Required Time......:  0:00  Copy Errors detected.................: 3

For reinstall with sapinst: i have below doubts.

1. do i need to uninstall existing DAA? if Yes how?

2. For kernel what should i do? do i need to place kernel DVD or is there any way to place latest kernel?

3. i have attached sapinst screen with option selected, please correct me if am wrong?

Thanks,

Venkat

[Former Member]

Please check content of D:\usr\sap\DAA\SYS\exe\jvm\NTAMD64\sapjvm_6.1.031/ directory and provide output here again. Also attach content of sapjvm_6.lst file.

[Former Member]

Hi Roman,

Now am managed to solve this issue by removing LF character for lines. after removing i restarted this time no more errors in sapcpe_sapjvm_6.log but still am unable to start DAA

after removing character sapjvm_6.lst as below:

sapjvm_6.lst

sapjvm_6

sapjvmmanifest.mf

From other logs am able to see error as below: dev_flightrec.log:

F  ********************************************************************************

F  [Thr 48476] *** ERROR => SfEIO: SfChDir: chdir(D:\usr\sap\DAA\SMDA97/j2ee) failed (errno = 2 No such file or directory)  [sfxxlib.hpp  196]

F  [Thr 48476] *** ERROR => Operation failed: SfEIO: SfChDir: chdir(D:\usr\sap\DAA\SMDA97/j2ee) failed (errno = 2 No such file or directory)

[sfxxmain.cpp 1173]

F 

F  ********************************************************************************

F  *** ERROR => Mutex initialization failed.

F  ***

F  *** Please see section 'Java process initialization issues'

F  *** in SAP Note 1316652 for additional information and trouble shooting advice.

F  ********************************************************************************

F 

Thanks in advance

Venkat