on 03-28-2013 5:03 AM
Dear All,
Recently we have upgraded our Development and Quality System from ECC6 to EHP5.
After upgradation I have delete QAS STMS configuration from DEV system and add again as I have shift QAS server to another server (Host name changed)
QAS is added sucessfully. I have "check" all three Connection Test, Transport Directory and Transport Tool. All checks are Ok.
But there three component mismatch between DEV and QAS. I have installed all mismatched component in QAS. Now DEV and QAS have same component.
All transport requests automatically copied from DEV to QAS. But when I press "Adjust Impoert Queue (Ctrl+F6)" System shows following error :
I have attached screenshot also.
Message no. PS001
An error occurred when opening the source file for reading.
File name: R908177.DEV
Directory: $TR_DATA
Error code: 18
Definition of the error codes:
03 RFC system failure
04 RFC communication failure
11 invalid EPS subdirectory
12 sapgparam failed
13 build directory failed
14 no authorization
15 build path failed
16 open failed
17 read directory failed
18 read attributes failed
Transmission was terminated.
Eliminate the cause of the error and restart the transmission.
Thanks and Regards,
Nirav
Hi Nirav,
I feel that the TR stored in OS level is corrupted.
IF possible, ask your ABAPers to re-generate one more TR and release it.
Then you can try to import it in your QUA and PRD after testing.
Thanks and Regards,
Vimal
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Nirav,
Please confirm whether you are facing the issue only with this particular TR or all the TR's.
PLease test it by genereating a dummy TR ( may be a empty role) and move it to Quality for testing..
If it is working, then as I Said the the issue is with the TR only ..
Thanks and Regards,
Vimal
Dear Vimal,
Thanks for your reply.
I have created new TR in DEV. But I have to "Adjust Import Queue Ctrl+F6)".
After that also status remain as it is.
New TR in imported in QAS but it shows Red coloured. You can see in screenshot of my previous post.
Request number DEVK915263.
Thanks and Regards,
Nirav
Dear Vimal,
I have delete and recreate TMS. But problem remain same.
The new created request was imported. But in STMS request log shows following error message. But changes are applied sucessfully in QAS.
######################################
Main import
Transport request : DEVK915267
System : QAS
tp path : tp
Version and release: 380.03.91 720
R3TRFUGRJ1I7 was repaired in this system
Main import
End date and time : 20130328112307
Ended with return code: ===> 8 <===
######################################
Thanks and Regards,
Nirav
Hi,
Please check the below link... Seems to be of exact of your issue.
http://scn.sap.com/thread/1174632
Thanks and Regards,
Vimal
Hi,
To fix the repaired objects issue.Please proceed as follows:
Check if you find back the entry( R3TR FUGR J1I7) in table TLOCK using SE16.
If there is an entry in table TLOCK then field TKORR will contain the transport request number which contains the unconfirmed repair.
Release the transport request and confirm the repair. SAP note 42379 describes the procedure in detail.
(or)
If there is no entry in table TLOCK then for some reason the repair was not confirmed meaning the repair flag is still set.
Reset the repair flag without transport using transaction SE03. SAP note 9949 describes the procedure in detail.
Regards,
Anand.
Hi Nirav,
could you please check below thread which was for same issue.
http://scn.sap.com/thread/1341343
http://scn.sap.com/thread/3204014
Best Regards,
Atul
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Dear Atul,
Thanks for your reply.
I have checked, permissionst are ok.
I have checked http://scn.sap.com/thread/3204014
But everything is ok.
Is it required to configure STMS again, as I have installed mismatched component in QAS after STMS configuration.
Thanks and Regards,
Nirav
Hi Nirav,
Thanks
Kishore Cherukumalla
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Dear Kishore,
Thanks for your reply.
I have checked patch level of individual components and compare. Both the systems at same patch level. When configure STMS at that time there was a diff. in following component due to that screen shot shows diff. in compnent flag. But after that I have installed all mismatched component. But that flag is not reset.
CPRXRPM 400 22
CTS_PLUG 200 5
EA-HR_MSS 1 4
I have run all three checks from both the systems. It is OK.
Transport Requests are copied from DEV to QAS
But when I press buttton "Adjust Impoert Queue (Ctrl+F6)", system throws error.
Even when I refresh queue, every time it start with "QAS: Sending import Que QAS(block 1 from 33)" status. It will take newar about 15 minutes.
Thanks and Regards,
Nirav
User | Count |
---|---|
83 | |
24 | |
12 | |
9 | |
7 | |
6 | |
5 | |
5 | |
5 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.