on 03-26-2013 12:44 PM
Hi,
I have two issues.
1. Here two types of MICs and two departments, metallurgical and non metallurgical. User want result recording as per their types like metallurgical MICs will be recorded by metallurgical dept user and non metallurgical MICs will be recorded by quality dept. How can I configure this. Ex hardness MIC will be recorded by metallurgical dept and diameter MIC will be by quality dept.
2. Also user want to capture process control parameters like machine speed, coolant temperature etc before production confirmation. How can I configure this also.
Please suggest ASAP.
Thanks,
Regards
Mayuresh Patil
Hi,
Create 2 work centers for each department and assign them to two operations in inspection plan.
Assign the relevant inspection characteristics to the correct work center.In the authorizations for inspectors give authorizations for a particular work center only.You need to have 2 user ID to achieve this.
Assign all the machine parameters to one of the operation in routing(eg : operation no 10).When a production order is released system will generate 03 inprocess inspection lot.In Define Confirmations you have a choice that if inprocess results are not recorded you can stop the confirmation of that particular operation(
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
98 | |
11 | |
11 | |
6 | |
3 | |
3 | |
3 | |
3 | |
3 | |
3 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.