eCATT activation error during BL_ERP606_BRV1 implementation (BP-SOLBLD)

[Former Member]

Hi folks !

I'm experiencing problems during activating scenarios in the BP Baseline Installation Assistant (BL_ERP606_BRV1).

When I press the "Activate" button in the Installation Assistant for /SMB99/PREREQ_INTEGRATION_100, the error message appears:

Activation stopped with an error

Message no. /SMB/BBPRJ_INST123

The pop-up is shown:

==============================================================================

Add-on is not up to date

Situation

The add-on release installed in your system (see title bar) is not

up to

date, a newer version is available. Install the latest add-on as

described below to avoid issues during the activation of your SAP Best

Practices version.

Procedure

Download the latest add-on from the SAP Service Marketplace, Software

Download Center. For any details follow the download instructions as

described in the SAP Best Practices Quick Guide.

The Quick Guide is attached to the overview note of your SAP Best

Practices version. The number of the SAP Note can be found on the

documentation DVD in the section "Feedback & Support" -> Support

Information.

The documentation DVD is also available for online access via the SAP

Help Portal http://help.sap.com/bestpractices

==============================================================================

In principle, that all pre-requisites was fulfilled, according to QuickGuide, SAP Notes 1301301, 1770759, 1240936, 1670121, 1706705, including

the BP-ERP_606V4_Correction_transport.zip (RT6K907188).

1) I have installed an ERP 606.

2) The support packages installed/updated to implement Baseline Best Practices was:

SAPKD73148 SPAM/SAINT Update - Version 7.31/0048 Imported on 22.03.2013 at 17:42:08

SAPKB73101 SAP_BASIS 731: SP 0001 Imported on 22.03.2013 at 18:32:01

SAPKA73101 SAP_ABA 731: SP 0001 Imported on 22.03.2013 at 19:20:15

SAPK-73101INPIBASIS PI_BASIS 731: SP 0001 Imported on 22.03.2013 at 19:34:10

SAPKW73101 SAP_BW 731: SP 0001 Imported on 22.03.2013 at 19:34:11

SAPK-73101INMDGFND MDG_FND 731: SP 0001 Imported on 22.03.2013 at 19:48:05

SAPKNA7025 SAP_AP 700: SP 0025 Imported on 22.03.2013 at 19:38:36

SAPKNA7026 SAP_AP 700: SP 0026 Imported on 22.03.2013 at 19:38:37

SAPK-73101INSAPBSFND SAP_BS_FND 731: SP 0001 Imported on 22.03.2013 at 19:48:04

SAPK-73101INWEBCUIF WEBCUIF 731: SP 0001 Imported on 22.03.2013 at 19:48:03

SAPKH60601 SAP_APPL 606: SP 0001 Imported on 22.03.2013 at 20:54:24

3) The add-ons installed to implement Baseline Best Practices was:

BP-CANW      731V4     0000      -     Tech. Obj. for SAP BP pkg. act. based on

BP-ERP      606V4     0000      -     SAP Best Practices All-in-One (EhP6)

BP-SOLBLD     70V8     0000      -     Solution Builder on SAP NW 7.02

4) The SAP Notes implemented by SNOTE are listed below (in addition, the pre-req notes was also implemented):

SAP Note	Description
70038	VPRS is not generated for batch items
1038797	BSP name longer than 15 characters for old application
1555900	Bank data not displayed for web-based customer maintenance
1555990	Reading a cluster view into container triggers exception
1560891	SCPR20: Wrong activation message against system settings
1577953	Rollback not possible for view clister in BC set activation
1593354	Automatic COMMIT WORK after executing an AIM
1600949	ADD_FROM_CURRENT from tables with only client key
1602498	Lange Laufzeit beim Lesen eines SBCSets mit find_container
1608831	No residual order plan from plan values of production order
1614527	Short dump RAISE_EXCEPTION after note 1608831
1632176	IF_BCFG_CONFIG_CONTAINER~ADD_CURRENT_CONFIG triggers excpn
1634209	Short dump during add_from_current_config
1635232	Short dumps when processing cust. objects of type T
1635270	Reg. Performance using ADD_CURRENT_CONFIG vs. directSELECT
1639708	Reg. Performance using ADD_CURRENT_CONFIG vs. directSELECT
1647761	Move cast when importing tables to BC Container
1652925	Problems with the field rec_id in generic BC API methods
1656394	Client settings on remote system not recognized correctly
1657757	MANDT field handling in generic field methods
1663244	Delegator to convert fields to internal format
1663631	GT: Portfolio list generation terminates
1670020	Leading blank characters are lost during APPLY
1672717	BC-API ignores initial values during language check
1673201	POWL: Row selection lost on Single/Multi selection modes
1674221	BC-API seems to write fields to wrong SCPR tables
1681645	eCATT-upload ext. variants: error when TDC value is empty
1696238	BC API Extensions - 2012, all sprints (3-6)
1701840	Enhancing the BC API: Metadata service
1709937	Material usage not considered for dynamic exceptions table
1718547	Inaktive Schaltflächen in POWL OrderToBill für Projekte
1750404	BC API: overwritting field content in transparent table
1752220	BC API:Short Dump in add_current_config, selection condition
1753345	Exception in extract_key_container (due to sel-conds?)
1756939	Short dump on views where keys come from check tables
1758294	Reading a T table with only MANDT as key - short dump
1760875	Reading a T table with only MANDT as key - short dump
1762259	Missing after_import for L-object causes inconsistency
1768514	SQL dump in BC-API
1777370	Solution Builder (BP-SOLBLD 70V8) Hotfixes 001
1777371	Solution Builder (BP-SOLBLD 70V8) Generation Errors BC-API
1777372	Solution Builder (BP-SOLBLD) Required Notes Collection
1778281	BC API, Bugfix Delta NW731 SP05..SP06
1793852	Material Origin Code available in tax dynamic exceptions tab

5) All steps contained in the QuickGuide (BL_ERP606_Quick_Guide_EN_BR 2.doc) was made to prepare the installation of Baseline Best Practices.

6) The installation files and solution files used to install was:

- INST_FILES_BR_BP_ERP606V4.zip

- SOL_BL_ERP606_BRV1_BP_ERP606V4.zip

So, after these, I cannot implement the Baseline Best Practices Package.

Can you help me, please ?!

I'll be waitting soon.

Regards,

Rodrigo A. Botelho

[juan_antonio_murad]

Dear RA Botelho

This error is common when you start the activation. To continue to be modified by "debugg" variable eccat validating the version of the add-on "BP-*" (before you confirm the versions of the add-on "BP-*" be the last).
The steps are:
1) Call the secatt transaction.
2) the option "Script test" place / SMB99/CHECK_BP_ADDON_I001_100.
3) Set the display.
4) Place a breckpoint in any ABAP statement "IF V_RELEASE <> 'NONE'.".
5) Start Activation.
6) when entering by "debugg" validate the judgment that checks the version of the "BP-*" for debug modify the value to avoid the error message comes up.

regards

Juan

[Former Member]

Hello,

I'm facing the same issue with BL_ERP606_MXV1.

Restarting the activation, however, doesn't solve the issue for me.

I keep getting the same error every time.

Thanks and regards,

Hernán Martínez

[BobT]

Hello,

Same here when activating RETAIL_DE_V1606

Message:

your add-on bp-solbld, release 70v9 is not up to date

with error: /SMB/BBPRJ_INST123

W've implemented note 1862674 (version 81, released today) but still the same error keeps appearing.

Regards

Bob

[Former Member]

Hello Rodrigo A. Botelho,

I Have also faced the same error while activating( Brazil Localization) but  I have restated the Activation. Activation is completed success fully.

Thanks & Regards,

Sushma