on 03-22-2013 9:30 AM
Dear all,
I've started the Export preparation for OS migration of Non-Unicode Central instance SAP ECC6.0 NW70 SR2 Oracle 11.2.0.3 on HP-UX 11.31. to RedHat 6.
I'm using the 70SWPM Software Provisioning Manager 1.0 SP01 70SWPM*.SAR which supports the SAP NetWeaver 7.0 Support Release 3.
The Export preparation phase stoped with the following error:
saphost:/tmp/sapinst_instdir/NW700/LM/COPY/ORA/EXP/CENTRAL/AS-ABAP/PREEXP#cat brconnect.log
BR0801I BRCONNECT 7.20 (30)
BR0805I Start of BRCONNECT processing: cekuspzf.sta 2013-03-22 10.12.27
BR0484I BRCONNECT log file: /oracle/TST/sapcheck/cekuspzf.sta
BR0280I BRCONNECT time stamp: 2013-03-22 10.12.31
BR0813I Schema owners found in database TST: SAPR3*, SAPR3SHD+
BR0824E Owner 'SAPSR3' not found in database or not SAP owner
BR0182E Checking parameter/option 'stats_owner/-o' failed
BR0806I End of BRCONNECT processing: cekuspzf.sta 2013-03-22 10.12.31
BR0280I BRCONNECT time stamp: 2013-03-22 10.12.31
BR0804I BRCONNECT terminated with errors
We don't have SAPSR3 shema in the database instance.
Do you know what is the problem?
Can it be because I use the SWPM whic does not support the SR2 version of NW70?
Thank you in advance.
BR,
Ruzica
hi
is the parameter dbs_ora_schema set ?
best regards
marius
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
I set the dbs_ora_schema =SAPR3 in user tstadm and started the installer again witn Run new option.
Then In the part for statistics there is SAPR3 schema:
brconnect -u / -c -o summary -f stats -o SAPR3 -t all -m +I -s P10 -f allsel,collect,method
I'll wait for the statistics to be done and I'll proceed with the installer after for the Export preparation.
Thank you all.
Have a nice weekend.
BR,
Ruzica
Hi Ruzica,
Please don't change anything in keydb.xml or control file.
I feel the issue could be due to some incorrect corrections in the swpm file.
Even when you change it in keydb.xml or control file, in case phase, SWPM will check the environmental variables and update the keydb.xml file.
As i said earlier, you can run the oracle stats manually and continue with the export using SWPM.
If you are still facing the issue and confirm that it is the SWPM issue you can download the installatino master ECC 6.0 and use the system copy option and check.
Mostly you won't face this issue.
I strongly feel that this issue could be due to the SWPM bug ONLY.... If the issue is with the environmental variables, then you will face many issues in your ORACLE.
I hope this information helps.
Thanks and Regards,
Vimal
Hello Vimal,
I wanted to start with the installation master for NW70 SR2, but there were no installation master CD, just upgrade master. That's why I downloaded this SWPM tool as you said.
What kind of issues will be there for ORACLE? Now the dbs_ora_schema =SAPR3 environment solve this issue.
Thank you.
BR,
Ruzica
Hi,
Please check whether you have access to download the below DVD number.
51040125_2 NW 7.0 SR3 Inst.Master HP-UX IA64 64bit for Oracle 10.2/11.2
If not, please raise a SAP message and request them to enable the access to download the above DVD. They will enable it within few hours ...
Thanks and Regards,
Vimal
You can also use the below DVD
51040432_2 NW 7.1 Inst.Master HP-UX IA64 64bit for Oracle 10.2/11.2
Hi,
I can't find these CDs you've mentioned.
I'm trying with this path:
My Company's Application Components"->My Company's Software-> SAP NETWEAVER" ->SAP NETWEAVER 7.0 ->SAP NETWEAVER 7.0 (Installations and Upgrades) ->Hp_UX->Oracle Database.
Are the CDs on some other path?
Thank you.
BR,
Ruzica
Hi Ruzica,
Please go to http://service.sap.com/swdc -> software center download -> support packages and patches -> installations and Upgrades -> search for installation and upgrades
Search using the following DVD's names and check whether you are able to acccess the DVD's.
NW 7.0 SR3 Inst.Master HP-UX IA64 64bit for Oracle 10.2/11.2
NW 7.1 Inst.Master HP-UX IA64 64bit for Oracle 10.2/11.2
If you don't have access, then you can raise an OSS message to enable the access to download the above DVD's. They will be able to provide the access to download the error-free installation master which you can use it.
Thanks and Regards,
Vimal
Hi
In the SAPINST screen where you were asked the Schema name & password you should provide the name of your current DB schema and its password.
Please check if this was done correctly.
-Roshan
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Ruzica,
I would strongly suggest you to use the latest SWPM and try again.
Please refer the note Note 1680045 - Release Note for Software Provisioning Manager 1.0
Secondly, please make sure that you use the correct ABAP schema in the SWPM.
Please try with the new SWPM and check again.
Thanks and Regards,
Vimal
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi,
If possible can you please share the step by step screenshot of SWPM so that we can try to find out what could be the issue?
You can also perform one more way is like
you can manually execute the brconnect with the correct ABAP Schema ID and in SWPM you an skip it and proceed... This is also a safer way
Thanks and Regards,
Vimal
Hi Ruzica,
1) Are you running the export using sidadm user ?
2) Did it ask for SAP SCHEMA input during inpu parameters before starting the export.
Regards,
Deepak Kori
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Vimal,
I started again the installer, and in the part with statistics I saw that it wil use the SAPSR3 schema:
brconnect -u / -c -o summary -f stats -o SAPSR3 -t all -m +I -s P10 -f allsel,collect,method
Now I started the statistics from comand prompt for user oratst and with the right schema:
brconnect -u / -c -o summary -f stats -o SAPR3 -t all -m +I -s P10 -f allsel,collect,method
Then I'll skip the statistics, but the installer will still use the same schema SAPSR3.
What do you think?
BR,
Ruzica
hi ruzica
Note 1169802 - Inst.NetWeaver 7.0 EHP1/Business Suite 7 - UNIX/Oracle
--------------------<d023322 ,15/SEP/08>---------------------------
Java, Java Add-In: Error in step "createOracleStatisticsJava"
Symptom:
You changed the default value for the Oracle database Java schema (default value "SAPSR3DB" with a value of your choice.
During installation step "createOracleStatisticsJava", you find the following error in brconnect.log:
BR0824E Owner 'SAPSR3DB' not found in database or not SAP owner
Solution:
Proceed as follows:
Message was edited by: Marius Burger i know its not java but it gives you an idea
There are many places where to change and some are confusing because it checkes if abapSchema1=SAPSR3 or abapSchema1= SAPR3:
if ( ABAPSchemaEnv || ad1.name != abapSchema || ad1.name == "" || ad1.name == undefined || ad1.name == "undefined" )
{
var abapSchema1 = "SAPSR3";
rowchanged = true;
// do not update the schema if env is different from keydb and the schema is updated in dialog
if ( ad1.name == abapSchema && parseBool(abapSchemaUpdate) )
rowchanged = false;
if ( ABAPSchemaEnv )
{
NW.trace("NWDBora.setABAPSchemaDefault (ABAPSchema: ",ABAPSchemaEnv.value(),")");
abapSchema1 = ABAPSchemaEnv.value();
if ( abapSchema1 != "SAPR3" )
{
var re = /^SAP(.{3})$/;
var match = re.exec(abapSchema1);
if (!match) {
throw new NWException("nw.progress.invalidSchemaName", abapSchema1);
}
}
if ( abapSchema1 == ad1.name && abapSchema1 == abapSchema )
rowchanged = false;
}
}
And some parts with :
fileStream.putLine("dbs_syb_schema=SAPSR3");
What should I change ?
BR,
Ruzica
I searched for SAPSR3 in :
/tmp/sapinst_instdir/NW700/LM/COPY/ORA/EXP/CENTRAL/AS-ABAP/PREEXP#cat keydb.1.xml|grep SAPSR3
/tmp/sapinst_instdir/NW700/LM/COPY/ORA/EXP/CENTRAL/AS-ABAP/PREEXP#cat keydb.xml|grep SAPSR3
sapds:/tmp/sapinst_instdir/NW700/LM/COPY/ORA/EXP/CENTRAL/AS-ABAP/PREEXP#
There is no SAPSR3 in this files.
BR,
Ruzica
User | Count |
---|---|
87 | |
10 | |
10 | |
10 | |
7 | |
6 | |
6 | |
5 | |
5 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.