how to set fqdn name for 7.1

[Former Member]

Hi

  recently  we installed sap solman7.1 SR1, Every thing is upgraded properly...

  the thing  is i dinnt give the FQDN Name in the installation, i skip that installation screen, now i want to give the fqdn name...for solan_setup configaratio purpose .my question is how to give the fqdn name.. after the installation

regards

vreedy

[Former Member]

Hello,

after upgrade my solman to SPS13 I had also issues with FQDN.

I recommend review following note:

1611483 - Solution Manager 7.1 - Outside Discovery Common Error Messages

1626853 - SolutionManager7.1 - Outside Discovery FQDN Customization

Also please review if step Prepare Outside discovery (System preparation> Prepare Landscape Description) is successfully done.

[former_member223287]

Hi to all,

I am in strange situation,

We have one system(Eg:X) which having database and sap installed in that system(X)...

and three IP's pointing to that same system(X)..

and having one dialog(Eg :Y) instance..

am unable to set FQDN for virtual system.

attached image is the for your reference.

[rahul_yedapally]

Hello Srikanth,

Please configure the parameter in RZ10

icm/host_name_full = hostname with FQD name

Please also maintain FDN in Host entry

Cheers,

Rahul

[Former Member]

hi Verareddy,

Do also adapt SAPLOCALHOSTFULL parameter in RZ10 too apart from icm/host_name_full as mentioned in earlier reply.

This should resolve the query.

Regards,

Ram

[former_member206167]

Hi Jansi,

    First of all, you need to register your systems into solution Manager SLD using tx RZ70 and SLDAPICUST,

2.  Run job SAP_LMDB_LDB_0000000001 in your solman

3. Register diagnostics agents (SMD) to Solution Manager SLD

4. Run tx SOLMAN_SETUP ==> Managed System configuration there you must see your new system. Click on Configure System and read carefully recommendations given on each activity

Regards

[Former Member]

Hi there you Experts , i feel so much better when i read your blogs

i have decided to implement Solman 7.1 , phase 1 config of Interface monitoring (Idocs) , what a reading lesson this has been i must admit

needless to say i am getting somewhere i hope !

i am the stage where Solman is setup with green go ahead for System Prep and Basic Config

the Managed Systems Config has a warning and hence i came to your blog FQDN

i tried to follow the response to the original question in this blog and what i see is this is something that needs to be configured manually !

your assistance is greatly appreciated

Thank you

Ravi

[Former Member]

Hi Ravi,

There are some point you need to do manually.

1. Check the configuration of Diagnostic Host Agent.

2. Set profile parameter SAPLOCALHOST = <hostname> and icm/host_name_full

3. The host file on Windows should follow below format:

<IP Address>     <FQDN>     <hostname>

After checking all these things, update the warning, and everything will be fixed.

Regards,

LN

[Former Member]

hi,

if you are looking only for solman_Setup, then i could say, just assign the fqdn to the ICM parameter icm/host_name_full.

and restart ICM.

please check and update.

Thanks

Jansi

[Former Member]

Hi

Thanks for the replay, this problem is solved , what are the next things i have to do after this please give  a note on point wise, very thank full to u and eagerly waiting for replay...

regards

vreddy

[Former Member]

Hi Verrareddy,

Please complete all the post installation steps as mentioned in the installation guide.

The below URLS give you step by steps how to configure the solman 7.1.

strongly suggesting you to follow the Documentation.

Main: https://websmp103.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000736990

   Demo on Guided Procedure for Configuration of SAP Solution Manager

https://websmp103.sap-ag.de/~sapidb/011000358700000469082011E/index.htm

SAP Solution Manager Basic Configuration:  Online help

http://help.sap.com/saphelp_sm71_sp01/helpdata/en/af/b0ddec01e34180886934bd7dcd6d58/frameset.htm

Thanks

Kishore Cherukumalla

[Former Member]

Hi

  THANKS For the replay, i open all the links what u send ,  my question how add the technical systems , and how to configure mopz ...

these steps before we do the solman_setup configuration ? or after the configuration..please guide me ...  thanks alot

regards

vreddy

[Former Member]

Hi,

follow

mopz configuration steps are taken care by solman_setup.

chk the demos here http://service.sap.com/rkt-solman -> Solution Manager 7.1

Please check

Thanks

Jansi

[Former Member]

Hi Jansi

Thanks for the replay,.....shall i start with first link, but my douts are

1. how to add systems

2.how to configure landscape

3. how to enter this systems in to landscape

4. what is lmdb? what is sld?

thanks alot for ur help

regards

vreddy

[former_member223287]

HI Veerra,

How solve this issue..

am facing same issue now kindly update.

Regards,

srikanth

[Former Member]

Hi Vreedy,

as mentioned in my other post:

Go to tx rz70 -> check the DEFAULT profil parameter -> SAPFQDN and SAPLOCALHOSTFULL

for example:

SAPFQDN = your local defined domain name

SAPLOCALHOSTFULL = $(SAPLOCALHOST).$(SAPFQDN)

Regards,

Mike

[Former Member]

Hi

is the rz10? when i open the the tcode rz70, i got the bellow screen

[Former Member]

You mean RZ10 , not rz70....

Setting the parameters should do the trick.

Also, make sure your /etc/hosts file starts with:

ip fqdn hostname

this will make sure outside discovery picks up your fqdn properly.

Regards,

David