on 03-13-2013 6:11 PM
Dear All,
I am getting below error when I am trying to deploy the LM-Service with SDM.
Starting Deployment of tc/smd/agent/application/database
Aborted: development component 'tc/smd/agent/application/database'/'sap.com'/'SAP AG'/'7.01.13.0.20121030082748'/'0', grouped by :
Error: Caught the following error or exception: "java.lang.NoClassDefFoundError"
Additional error message is:
com/sap/engine/services/deploy/container/WarningException
What can you do?
- See SAP note 514156 for further information.
Deployment of tc/smd/agent/application/database finished with Error (Duration 1232 ms)
Starting Deployment of LM-SERVICE
Aborted: software component 'LM-SERVICE'/'sap.com'/'SAP AG'/'1000.7.01.13.0.20121030083404''/'0':
Failed deployment of SDAs:
development component 'tc/smd/agent/application/database'/'sap.com'/'SAP AG'/'7.01.13.0.20121030082748'/'0' : aborted
Please, look at error logs above for more information!
Deployment of LM-SERVICE finished with Error (Duration 1224 ms)
Regards,
Can you attach full deployment log or screenshot with error from SDM.
Regards,
Roman
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
hi Samuli,
I am deploying the patches with JSPM but one patch not found while i tried with all highlighted patches.
Please check the above snap and tell me the path of ISAGENT 8.1 and its patches?
There are too many file in \usr\sap\SOL\DVEBMGS00\j2ee\JSPM\log\. please tell me file which I have to share with you to check the result of JSPM.
Regards,
This is more of an SAP Basis problem. Do you have anyone that could help you? Anyway, check in the JSPM log directory for a log file called SCAN_INBOX, it will have the filename of the missing archive. It could also be that the file is there but it's corrupt in which case you should download it again.
hi Samuli,
I checked the SCAN_INBOX and find the below information
after that i uploaded the kernel files and restart the JSPM.
please check JspmResults(find attached file for complete result)
I just uploaded the kernel files but how the below missing tag is resolve?
SAP-NOTE tag is missing
STACK-SHORT-NAME tag is missing
PRODUCT-PPMS-NAME tag is missing
why did I not face the below Exception during JSPM?
Error: Caught the following error or exception: "java.lang.NoClassDefFoundError"
Regards,
Message was edited by: M. Abdul Jamil
Don't concern yourself with the tag warnings, as long as JSPM ended succesfully and your system works, no need to worry.
You didn't get the error because you patched your system the way it is supposed to be done, with JSPM, correct level of components and LM-SERVICE and LM-TOOLS patched at the same time.
Hi Abdul,
I think problem with software.Try to download the software again see the size of the file and try to apply again.
Regards
Ashok
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Provide the exact version of your Solution Manager system. You should make sure the LM-SERVICE SCA you are trying to install is compatible with the rest of your system. Furthermore according to SAP note 1800927 LM-SERVICE should be installed together with the ST component.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Dear Samuli,
I have installed SOLMAN 7ehp1 and upgraded the SPs.
SAP_BASIS | 701 | 0012 | SAPKB70112 |
SAP_ABA | 701 | 0012 | SAPKA70112 |
PI_BASIS | 701 | 0012 | SAPK-70112INPIBASIS |
ST-PI | 2008_1_700 | 0007 | SAPKITLRD7 |
CRMUIF | 500 | 0010 | SAPK-50010INCRMUIF |
SAP_BW | 701 | 0012 | SAPKW70112 |
SAP_AP | 700 | 0028 | SAPKNA7028 |
BBPCRM | 500 | 0021 | SAPKU50021 |
BI_CONT | 706 | 0005 | SAPK-70605INBICONT |
CPRXRPM | 400 | 0021 | SAPK-40021INCPRXRPM |
ST | 400 | 0030 | SAPKITL440 |
ST-BCO | 400 | 0003 | SAPK-40003INSTBCO |
ST-A/PI | 01P_700 | 0000 | - |
ST-ICO | 150_700 | 0035 | SAPK-1507ZINSTPL |
ST-SER | 701_2010_1 | 0016 | SAPKITLOSG |
Please check the status of SDM.
would you confirm me about deployment of LM-SERVICE. Right now the LM-SERVICE is 7.01 SP10 and may i deploy the LM-SERVICE 13 or I have to follow the sequence.
Regards,
No, you can't install SP13 without updating other AS JAVA components. You can install a patch on top of the SP10 you are using, however you should also update LM-TOOLS, it is still at SP2. I think that might be the reason for the problem you are seeing. LM-SERVICE and LM-TOOLS should be patched together.
If you want to update to a higher SP level, use MOPZ to calculate the stack, download and install with JSPM (and SAINT for AS ABAP). That said my recommendation would be to use MOPZ since your system is already in an unsupported state (LM-SERVICE SP10, LM-TOOLS SP2). Remember to make a MOPZ transaction for Solution Manager 7.0 EHP1, not NetWeaver 7.0 EHP1.
hi Samuli,
I downloaded the Patches and SPs
SAP Technology Components" SAP SOLUTION MANAGER" SAP SOLUTION MANAGER 7.0 EHP 1" Entry by Component" Solution Manager JAVA Stack
LIFECYCLE MGMT TOOLS 7.01
# OS independent
LMTOOLS03_0-10005881
LMTOOLS03P_2-10005881.SCA
I am getting below error during the deployement
Starting Deployment of tc/archtech/browser/viewer/locator
Aborted: development component 'tc/archtech/browser/viewer/locator'/'sap.com'/'MAIN_NW701P03_C'/'2847026'/'1', grouped by software component 'LM-TOOLS'/'sap.com'/'MAIN_NW701P03_C'/'1000.7.01.3.0.20081210084903''/'1':
Error: Caught the following error or exception: "java.lang.NoClassDefFoundError"
Additional error message is:
com/sap/engine/services/deploy/container/WarningException
What can you do?
- See SAP note 514156 for further information.
Deployment of tc/archtech/browser/viewer/locator finished with Error (Duration 1817 ms)
Starting Deployment of LM-TOOLS
Aborted: software component 'LM-TOOLS'/'sap.com'/'MAIN_NW701P03_C'/'1000.7.01.3.0.20081210084903''/'1':
Failed deployment of SDAs:
development component 'tc/archtech/browser/viewer/locator'/'sap.com'/'MAIN_NW701P03_C'/'2847026'/'1' : aborted
Please, look at error logs above for more information!
Deployment of LM-TOOLS finished with Error (Duration 1981 ms)
how can i resolve this issue?
Regards,
I already provided the solution.
If you insist doing it the wrong way, at least install SP10 of LM-TOOLS, not SP3. And again, use JSPM not SDM. You should install LM-SERVICE and LM-TOOLS (of the same SP level) at the same time with JSPM, use force option if required (since SP10 of LM-SERVICE is already deployed).
User | Count |
---|---|
88 | |
10 | |
10 | |
9 | |
7 | |
7 | |
6 | |
5 | |
4 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.