on 03-04-2013 12:20 PM
Need to define TLB profile where in Cross loading is allowed, These are on same transportation lane. Issue is SKU A and SKU C and other SKUs are having different sizes.
Due to which while loading it consumes uneven space on pallets and which ultimately causing less loading.
Depending upon this can you please suggest me how should i creat TLB profile for this
SKU | Case Size UOM | Qty per Pallet | no of pallets(20") Carrier | no of Pallets (40") Carrier | 20" Max Units | 40" MaxUnits |
SKU A | 5 | 60 | 11 | 22 | 3300 | 6600 |
SKU B1 | 6 | 60 | 10 | 20 | 3600 | 7200 |
SKU B2 | 6 | 60 | 10 | 20 | 3600 | 7200 |
SKU B3 | 6 | 60 | 10 | 20 | 3600 | 7200 |
SKU C | 9 | 32 | 11 | 22 | 3168 | 6336 |
SKU D1 | 4.8 | 65 | 10 | 22 | 3120 | 6864 |
SKU D2 | 4.8 | 65 | 10 | 22 | 3120 | 6864 |
SKU D3 | 4.8 | 65 | 10 | 22 | 3120 | 6864 |
SKU E1 | 9.6 | 30 | 11 | 23 | 3168 | 6624 |
SKU E2 | 9.6 | 30 | 11 | 23 | 3168 | 6624 |
SKU E3 | 9.6 | 30 | 11 | 23 | 3168 | 6624 |
Hi,
Standard SNP does not have interfaces like SNC to build a complex TLB profile to meet your requirements. Pl check the following link to build the one using SNC interfaces.
http://help.sap.com/saphelp_sm40/helpdata/en/e7/aa3340fa40ea01e10000000a155106/frameset.htm
Thanks,
Rajesh
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
hi,
Not sure about ICH /SNC, But in current situation can we do like this: (SKUA)
1. In product master defind conversion 1 PAL = 300 TH
2. In product master UoM conv : 1 SET = 6600 .. Considering 40 ft Container.
Now when we define TLB profile it will be : Relationship is 1 AND 2
1 Floorspots 10 >= 23 <= PAL
2. Floorspots 0 >= 01 <= SET
Lets for example take qty of 10,000 TH
So as per TLB profile it will calculate PAL = 10000/300 .. 34 PAL
Second condition will be Max of 1 SET which = 6600 TH
So will it consider and create 1 STO with 6600 TH and Nother SKU with rest 3300 TH quantity.
Can you please correct me if i am missing or miscalculated.
Thanks in advance.
Based on the given rule and values, the TLB profile constrains the vehicle capacity with a max limit of 6600TH (minimum of condition 1 and 2). If you have a load of 10000 TH, then it creates 2 orders - STO1 with 6600 TH and STO2 with remaining 3400 TH. The influencing factors are the weight and floor spots.
The TLB Profile needs to be updated as
Rule Counter | Parameter | Parameter Desc. | Smallest Value | Sign (low) | Largest Value | Sign (High) | Unit |
1 | Weight | Weight in TH / in SET | 0 0 | >= >= | 6600 01 | <= <= | TH SET |
2 | Floor Spot | Pallet Positions | 10 | >= | 23 | <= | PAL |
Assuming your Base UoM is TH, the product master's UoM needs to maintained as follows
1 PAL = 300 TH
1 SET = 6600 TH
If you considering pallet stacking, maintain the staking factor in the product master settings. For instance, stacking factor 2 allows you to keep 2 pallets on 1 floor spot i.e. you can keep 2 pallets one above another (pallet positions in vertical direction).
Thanks,
Rajesh
Hi,
Unfortunately, in our system the webUI is not activated. However, the following link as all the required steps in detail. Pl check -
http://help.sap.com/scenarios_bus2008/helpdata/en/e7/aa3340fa40ea01e10000000a155106/frameset.htm
Thanks,
Rajesh
Hi Rajesh,
As per the TLB Profile:
For condition 1 WEIGHT 0 >= 6600 TH Can not be hard coded in TLB profile as for each SKU this value gets changed.
For SKU A it is 6600 TH for Full load, where in for SKUB1 it is 7200TH for full load and futher it varies.
Yes UoM conversions are in place for all SKUs as you mentioned.
If i am not wrong in TLB calculation as per previous reply, Pallets are rounded and calculated but system unable to calculate as per SET with same given condition.
Thanks,
Hi Jayashri,
Since TLB works based on t.lane and considers all the products that can use the give t.lane. Typically, your vehicle capacity limits your option here. For instance, a generic truck is permitted to carry a load 8000 kg (just an example), then your weight rule limits the vehicle loading up to 8 tonnes.
In case of unlimited capacity, you need to use a common denominator that can be applied to most of the products.
Thanks,
Rajesh
Hi Rajesh,
At last manajed to solve this issue, as sameexplained earlier
This time my TLB profile os
Floor Spots >= 10 <= 23 PAL Which is max pallets per truck
Volume >= 0 <= 1 SET Which is max truck load value.
SET contains full load for truck per SKU it has different conversion in Product master.
Thank you very much for your inputs.
Take care
User | Count |
---|---|
9 | |
4 | |
3 | |
2 | |
2 | |
1 | |
1 | |
1 | |
1 | |
1 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.