on 02-25-2013 4:08 PM
Hi,
I am getting the below error in the 8th step(configure automatically->Introscope Host adapter and Generate system level metrics) while performing the managed system configuration for the Solution manager. (Solution manager version 7.1 SP04; introscope version 9.1.0.0)
Enterprise manager is already installed on solution manager.
Configure CA Wily Introscope step in basic configuration is also successful.
Kindly help in solving the problem.
Error:
Introscope Host Adapter | <SID>/DATABASE : Activity 'Introscope Host Adapter' ended with errors |
Message:-
On instance : <instance Name>
No Wily EM host specified for instance/SID (FQDN). Please make sure System Parameters have been saved with a valid EM host selected.
Details:
On instance : <instance>
Setup Exception: Empty or no Wily EM host retrieved from Setup Wizard! Going on with "localhost".
Setup Exception: No Wily EM port was passed by SetupWizard! Going on with port 6001 instead.
Created destination <SID>|<instance>_<SID>_00
Created action <SID> - <SID> AbapSystem
Created action <SID>|<instance>_<SID>_00 - <SID>|<instance>_<SID>_00 AbapInstance
Created 2 action(s).
1 Wilyhost Agent(s) from host <instance> is connected to the EM.
Wilyhost Agent setup finished successfully with limitations: 2 exceptions occured. See location com.sap.sup.admin.wily.hostagent.config (severity: WARNING) in defaultTrace for details. Number of WilyHost Agents: 1, number of EP Agents: 0
No Wily EM host specified for <instance>/<SID>(FQDN). Please make sure System Parameters have been saved with a valid EM host selected.
| On instance : <instance>/DVEBMGS00 No Wily EM host specified for <instance>/SID/00[CI] (FQDN). Please make sure System Parameters have been saved with a valid EM host selected. | ||||||
| On instance : <instance>/DVEBMGS00 Setup Exception: Empty or no Wily EM host retrieved from Setup Wizard! Going on with "localhost". Setup Exception: No Wily EM port was passed by SetupWizard! Going on with port 6001 instead. Created destination SID|<INSTANCE>_<SID>_00 Created action SID - SID AbapSystem Created action SID|<instance>_<SID>_00 - <SID>|<instance>_<SID>_00 AbapInstance Created 2 action(s). 1 Wilyhost Agent(s) from host <instance> is connected to the EM. Wilyhost Agent setup finished successfully with limitations: 2 exceptions occured. See location com.sap.sup.admin.wily.hostagent.config (severity: WARNING) in defaultTrace for details. Number of WilyHost Agents: 1, number of EP Agents: 0 No Wily EM host specified for <instance>/<SID>/00[CI] (FQDN). Please make sure System Parameters have been saved with a valid EM host selected. |
Regards,
Neha
Hi Neha,
Also, you have to check the EM settings in the following locations:
1) Tx SOLMAN_WORKCENTER
- Tab Root Cause Analysis
- Diagnotics Setup
- Managing System
- Setup Wizard
In the step "Setup Parameters" you have to ensure that the EM host and port are correct. If you find any issue here, you have to correct it and rerun the "Setup Wizard" for the managing system.
2) Diagnostics Setup
- Diagnostics System
- Advanced Setup
- Tab Wily & NWA:
- Ensure that the EM host and RMI port are correctly defined here. The default ports are 6001 RMI and 8081 Webview.
The connection status must be green for the configured EM. If the status is not green, then remove the entries and fill them again and click on the button "Save monitoring settings". Maybe you need to click on the button "Refresh" to update the status. Then redo the managed setup wizard.
3) Tx SOLMAN_SETUP
- Basic Configuration
- Step 5 Landscape Data
- Wily Introscope Enterprise Managers
Also please have a look at SAP Note No. 1565954 Introscope 9 Release Notes
Regards,
Sachin
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi,
I am getting error like " No communication user has been selected " and " No connection user yet defined. Run User Management and set a connection user with min. permission ‘Read' ", in solution manager 7.1 sp10 Basic > Configuration > 3. Configure CA Introscope.
Wily Introscope version - 9.1.5
I have selected connection user also with Admin user in User Management button
Could you please find the attached screenshot.
Thanks
Srini T
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
i had the same problem. But after starting the EM i login with the Admin user into the webconsole. Then munutes later the guest user now accepted in User Management (button) in manager 7.1 sp10 Basic > Configuration > 3. Configure CA Introscope.
Strange!
PS: SAP Should go away from this JAVA EM stuff, it's ugly and cumbersome
Hi there,
It seems error is related to managed system, maybe you need to install host adapter on diagnostic agent of managed system !? please check that.
Regards,
AD
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Have you executed step 3.1 "Configure CA Wily Introscope" of Basic Configuration? Please share the screenshot.
Just for your information If you want to use EM9, you will need to have at least patch 1 for SP04. Older versions are incompatible.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
84 | |
10 | |
10 | |
10 | |
7 | |
6 | |
6 | |
5 | |
4 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.