Oracle 10.2 installtion issue

Hello,

I ma installting oracle 10.2 databse downloaded the dvd

ORACLE RDBMS 10.2 Windows 1 of 5

while running sapserver.cmd its pop is coming and immediatey disappaering and even itried run as adminsitrator also same thing happen

I am trying to install direct setup also its shwoing ou.exe stopped working.

any one please suggest me how to proceed further.

Thanks

SAP Managed Tags:
Oracle Database

You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.

Comment

Accepted Solutions (0)

Answers (3)

Sometimes problems like this are due the TEMP/TMP environment variable containing spaces (i.e. in the username part), try to manually set the GLOBAL (via Control Panel - System - Environment) TEMP (and TMP for a good measure) to something like "C:\TEMP, and create the directory beforehand.

Then try to rerun the installer

Hope it helps

Daniele

You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.

Comment

Hi,

TMP :%USERPROFILE%\AppData\Local\Temp

Temp: %USERPROFILE%\AppData\Local\Temp

these are environment varibales set in my system

Yes they are the defaults. Try to set them both to (i.e.) C:\TEMP and retry the installation. (again remember to create c:\TEMP or the name of your choice before you start the installation again)

tried but no luck .

Oracle 11.2 is feasble for server 2008 r2 ein version 6

it will support

Well Oracle 11.2 would absolutely be a better choice for Server 2008 r2. Is there any compelling reason for you to go with Oracle 10.2 ? If not try the newer release, as it is supported also per PAM

https://service.sap.com/sap/support/pam?hash=s%3Dce%25207.2%26o%3Dmost_viewed%257Cdesc%26st%3Dl%26rp...

Try to check your antivirus/firewall settings. Maybe they can block some activity.

Regards,

Roman

You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.

Comment

Hi all,

No i am copied new media also same issue and i am trying run setup its shwoing message

Using paramFile: D:\Installables\SAP NetWeaver CE\Extracted Netweaver CE\New folder\51031678\OFS334AMD64\install\oraparam.ini

Checking installer requirements...

Checking operating system version: must be 5.1 or 5.2. Actual 6.1
Failed <<<<

Exiting Oracle Universal Installer, log for this session can be found at C:\Program Files\Oracle\Inventory\logs\installActions2013-02-04_11-36-57AM.log

Please press Enter to exit...

Please suggest how to proceed further

You can use the option -ignoreSysPrereqs to skip the prerequisites check.

Kind regards,

Mark

Dear Mark,

Thanks for the response

Please suggest how can i use this comand i am using windows

If you run the installer via a cmd box you can add this parameter to it, or you can create a shortcut with the -ignoreSysPrereqs flag on the executable.

Kr. Mark

Hi,

Go to the path where RUNINSTALLER is available.

and try to execute like runInstaller -ignoreSysPrereqs

Open D:\Installables\SAP NetWeaver CE\Extracted Netweaver CE\New folder\51031678\OFS334AMD64\install\oraparam.ini file.

Add the entry 5.1 in the certified version place.

If the first option is not working, add the oraparam.ini file . I will change and give you.

Thanks and Regards,

Vimal

Hi Maria

Runinstaller is not avialable .alraedy edited Oraparam.ini ,but still not working

Please suggest

Can you please attach the oraparam.ini file. As well as please paste the error screen you are getting.

Thanks and Regards,

Vimal

Dear Vimal ,

I am not getting any error ,after running sapserver.cmd screen disppaering immeadiately.below is the file

[Oracle]
DISTRIBUTION=TRUE
SOURCE=../stage/products.xml
LICENSE_LOCATION=
JRE_LOCATION=../stage/Components/oracle.swd.jre/1.5.0.0.0/1/DataFiles
JRE_MEMORY_OPTIONS=" -mx192m"
DEFAULT_HOME_LOCATION=oracle\product\10.2.0\db
DEFAULT_HOME_NAME=OraDb10g_home
NO_BROWSE=/net
NLS_ENABLED=TRUE
BOOTSTRAP=TRUE
OUI_VERSION=10.2.0.1.0
## JRE_VERSION is only for Windows. This is to copy accessbridge dlls
JRE_VERSION=1.5.0
#SHOW_HOSTNAME=ALWAYS_SHOW shows the hostname panel always
#SHOW_HOSTNAME=NEVER_SHOW does not the hostname panel
#SHOW_HOSTNAME=CONDITION_SHOW shows the hostname panel on condition
SHOW_HOSTNAME=NEVER_SHOW
#THIN_JDBC_FILENAME is optional and defaults to classes12.jar
#The value specified for this should be packaged with OUI, and should
#be relative to <OUI expanded stagedir>/jlib/
THIN_JDBC_FILENAME=classes12.jar
#RUN_OUICA specifies the batch script name that needs to be run
#The script is ouica.bat for win32, and ouica.sh for solaris.
#If the value is not specified, then the OUICA script is not run
RUN_OUICA=ouica.bat
CLUSTERWARE={"oracle.crs","10.2.0.1.0"}

[Certified Versions]
#You can customise error message shown for failure, provide value for CERTIFIED_VERSION_FAILURE_MESSAGE
Windows=5.1,5.2,6.1

#Windows NT 4.0
#[Windows-4.0-required]
#Service pack for Windows NT4.0, use %SystemRoot%\WinNt\System32\winver.exe to find version and service pack
#SERVICE_PACK=6a
#You can customise the message shown for Service Pack failure through SERVICE_PACK_FAILURE_MESSAGE
#Minimum display colours for OUI to run
MIN_DISPLAY_COLORS=256
#Use MIN_DISPLAY_COLORS_FAILURE_MESSAGE to customise message for failure of check for Display colors
#Minimum CPU speed required for OUI in MHz
#CPU=300
#CPU_FAILURE_MESSAGE, use to customise error message for CPU speed check

#[Windows-4.0-optional]

#Windows 2000 use winver.exe to find version
[Windows-5.0-required]
#Minimum display colours for OUI to run
MIN_DISPLAY_COLORS=256
#Minimum CPU speed required for OUI
#CPU=300

[Windows-5.0-optional]

#Windows XP use winver.exe to find version
[Windows-5.1-required]
#Minimum display colours for OUI to run
MIN_DISPLAY_COLORS=256
#Minimum CPU speed required for OUI
#CPU=300

[Windows-5.1-optional]

#Windows .net use winver.exe to find version
[Windows-5.2-required]
#Minimum display colours for OUI to run
MIN_DISPLAY_COLORS=256
#Minimum CPU speed required for OUI
#CPU=300

[Windows-5.2-optional]

[IMAGES]
FILE1=images/rdbms_1.gif
FILE2=images/rdbms_2.gif
FILE3=images/rdbms_3.gif
FILE4=images/rdbms_4.gif
FILE5=images/rdbms_5.gif
FILE6=images/rdbms_6.gif
FILE7=images/rdbms_7.gif
FILE8=images/rdbms_8.gif

LICENSE_LOCATION=license.txt

Dear Mark,

How can i create short of _ignore SysPrerq flag

command box d:\NT/adm64\sapserver.cmd like this i am running where can i put _ignore sysprereq

Okay. Then it seems that some other programs is blocking your oracle installation.

Have you disabled firewall??

I have a doubt here. Why are you installing oracle 10.2 which support is going to end very soon..

Since it is fresh installation , you can install the latest oracle 11.2.0.2 or 11.2.0.3 .

Hi Vimal,

Windows firewall is off ,actually i am installintg netwevaer CE7.2 for ssm7.5 purpose .

Is their any other option to go ahead and do the installtion.

part sapserver.cmd can i go head with install 10g steup.exe.

Please suggest

Hi,

Have you downloaded the rest of 4 DVD's and extracted ?

Thanks and Regards,

Vimal

You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.

Comment

Hi Maria,

Download all the dvds and extratced,set the environment varibales as well.

Hi,

Dont set any environmental variables apart from JAVA_HOME.

It seems that some of the DVD's are corrupted. Please try downloading it again and check.

I faced this issue few days before and did redownloading the DVD's then it went well.

Thanks and Regards,

Vimal

Hi maria,

Thansk for your prompt response.

sam thing only i did Only set the JAVA_HOME only.

Right i have deleted the complete folder and i am having the separte copy of the media ,I am copying the new copy.

Is it okie or we need to download comlete dump again.

Thansk

Try again with the copying the DVD's.

If again you are facing the issue, please download the DVD's again.

Ensure that for time being windows firewall is disabled.

Hi maria,

how can we chek the windows firwall disbaled or enabled .

How can we disable

Thanks

Open Windows Firewall by clicking the Start button , clicking Control Panel, clicking Security, and then clickingWindows Firewall.
Click Turn Windows Firewall on or off. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
Click Off (not recommended), and then click OK.

Ask a Question

Top Q&A Solution Author

User

Count