on 09-21-2012 9:58 AM
Hi Gurus,
We have ECC 6.0 IDES System present with Oracle 10g as Database and Solaris 5.10 as Operating System.
System ID is "DEV" and Operating System Users are DEVADM and ORADEV .
We did kernel Upgrade and after that when i try to execute command R3trans -d then getting error like:
This is R3trans version 6.14 (release 700 - 26.10.11 - 13:00:00).
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'DEV'"
R3trans finished (0012).
Oracle database is Up, Listener is Up , SAPOSCOL is running and only R3trans -d is not working ; hence startsap command is not working fully.
Checked in the Forums but not getting exact solution for my problem.
I am
pasting the error part of "trans.log" file here.I think there is problem with Authentication as it is seen in the log file.
Requesting to help here how to resolve the issue.
4 ETW000 118 0.262819
4 ETW000 [ dev trc,00000] - oci_bind ( 0: SQLT_STR, l= 20, con=0, stp=1012f1540, vp=ffffffff7d093344,ip=0,rlp=0,rcp=0)
4 ETW000 205 0.263024
4 ETW000 [ dev trc,00000] -->oci_execute_stmt(con=0, stp=1012f1540, iters=1, rowoff=0, dml_batch_errors=0)
4 ETW000 248 0.263272
4 ETW000 [ dev trc,00000] <--oci_execute_stmt(rc=0, iters-errors = 1-0) [time 0,003s] 2580 0.265852
4 ETW000 [ dev trc,00000] -->oci_prepare_stmt(con=0, len=0, stp=1012f1540) 258 0.266110
4 ETW000 [ dev trc,00000] SELECT SID FROM V$MYSTAT WHERE ROWNUM<2
4 ETW000 122 0.266232
4 ETW000 [ dev trc,00000] -->oci_define ( 0: SQLT_INT, l= 4, con=0, stp=1012f1540, vp=ffffffff7fffefa4,ip=ffffffff7fffef66,rlp=0,rcp=0)
4 ETW000 259 0.266491
4 ETW000 [ dev trc,00000] -->oci_execute_stmt(con=0, stp=1012f1540, iters=1, rowoff=0, dml_batch_errors=0)
4 ETW000 257 0.266748
4 ETW000 [ dev trc,00000] <--oci_execute_stmt(rc=0, iters-errors = 1-0) [time 0,002s] 1453 0.268201
4 ETW000 [ dev trc,00000] Now '/@DEV' is connected: con=0, nls_hdl=0, session_id=72. 102 0.268303
4 ETW000 [ dev trc,00000] -->oci_prepare_stmt(con=0, len=0, stp=1012f1540) 103 0.268406
4 ETW000 [ dev trc,00000] ALTER SESSION SET NLS_SORT = BINARY
4 ETW000 118 0.268524
4 ETW000 [ dev trc,00000] -->oci_execute_stmt(con=0, stp=1012f1540, iters=1, rowoff=0, dml_batch_errors=0)
4 ETW000 143 0.268667
4 ETW000 [ dev trc,00000] <--oci_execute_stmt(rc=0, iters-errors = 1-0) [time 0,001s] 1252 0.269919
4 ETW000 [ dev trc,00000] -->oci_prepare_stmt(con=0, len=0, stp=1012f1540) 150 0.270069
4 ETW000 [ dev trc,00000] SELECT USERID,PASSWD FROM SAPUSER WHERE USERID IN (:A0,:A1)
4 ETW000 121 0.270190
4 ETW000 [ dev trc,00000] - oci_bind ( 0: SQLT_STR, l=256, con=0, stp=1012f1540, vp=ffffffff7d1aed74,ip=0,rlp=0,rcp=0)
4 ETW000 218 0.270408
4 ETW000 [ dev trc,00000] - oci_bind ( 1: SQLT_STR, l=256, con=0, stp=1012f1540, vp=ffffffff7ffff050,ip=0,rlp=0,rcp=0)
4 ETW000 124 0.270532
4 ETW000 [ dev trc,00000] -->oci_define ( 0: SQLT_STR, l=256, con=0, stp=1012f1540, vp=ffffffff7fffeee0,ip=ffffffff7ffff152,rlp=0,rcp=0)
4 ETW000 147 0.270679
4 ETW000 [ dev trc,00000] -->oci_define ( 1: SQLT_AFC, l=256, con=0, stp=1012f1540, vp=ffffffff7fffede0,ip=ffffffff7fffedde,rlp=0,rcp=0)
4 ETW000 148 0.270827
4 ETW000 [ dev trc,00000] -->oci_execute_stmt(con=0, stp=1012f1540, iters=1, rowoff=0, dml_batch_errors=0)
4 ETW000 120 0.270947
4 ETW000 [ dev trc,00000] OCIStmtExecute() failed with -1=OCI_ERROR 2367 0.273314
4 ETW000 [ dev trc,00000] SQL error 942: 76 0.273390
4 ETW000 [ dev trc,00000] ORA-00942: table or view does not exist
4 ETW000 155 0.273545
4 ETW000 [ dev trc,00000] <--oci_execute_stmt(rc=942, iters-errors = 1-0) [time 0,003s] 76 0.273621
4 ETW000 [ dbsloci.,00000] *** ERROR => ORA-942 when accessing table SAPUSER 104 0.273725
4 ETW000 [ dev trc,00000] set_ocica() -> SQL error code 942 79 0.273804
4 ETW000 [ dev trc,00000] -->oci_get_errmsg (con=0, rc=942) 114 0.273918
4 ETW000 [ dev trc,00000] OCIErrorGet -> SQL error code: 942 81 0.273999
4 ETW000 [ dev trc,00000] ORA-00942: table or view does not exist
4 ETW000 114 0.274113
4 ETW000 [ dev trc,00000] Disconnecting from connection 0 ... 89 0.274202
4 ETW000 [ dev trc,00000] Rolling back transaction ... 149 0.274351
4 ETW000 [ dev trc,00000] Closing user session (con=0,svchp=1012e4b28,usrhp=1012d4ab8) 497 0.274848
4 ETW000 [ dev trc,00000] Disconnected (con=0) from ORACLE. 2094 0.276942
4 ETW000 [ dev trc,00000] Info: 99=DBSL_ERR_DB, oerr=942, try to connect with default password.
4 ETW000 153 0.277095
4 ETW000 [ dev trc,00000] Connecting as SAPSR3/<pwd>@DEV on connection 0 (nls 0) ... (dbsl 700 131011, non-unicode)
4 ETW000 112 0.277207
4 ETW000 [ dev trc,00000] Assigning username to user session: con=0, usrhp=1012d4ab8 93 0.277300
4 ETW000 [ dev trc,00000] Assigning password to user session: con=0, usrhp=1012d4ab8 88 0.277388
4 ETW000 [ dev trc,00000] Starting user session: OCISessionBegin(con=0, usr=SAPSR3/<pwd>, svchp=1012e4b28, srvhp=1012e79c8, usrhp=1012d4ab8)
4 ETW000 129 0.277517
4 ETW000 [ dev trc,00000] OCISessionBegin(OCI_DEFAULT) failed with -1=OCI_ERROR 21822 0.299339
4 ETW000 [ dev trc,00000] OCISessionBegin(OCI_DEFAULT) failed with SQL error 1017: 94 0.299433
4 ETW000 [ dev trc,00000] ORA-01017: invalid username/password; logon denied
4 ETW000 116 0.299549
4 ETW000 [ dbsloci.,00000] *** ERROR => CONNECT failed with sql error '1017' 102 0.299651
4 ETW000 [ dev trc,00000] set_ocica() -> SQL error code 1017 73 0.299724
4 ETW000 [ dev trc,00000] -->oci_get_errmsg (con=0, rc=1017) 74 0.299798
4 ETW000 [ dev trc,00000] OCIErrorGet -> SQL error code: 1017 76 0.299874
4 ETW000 [ dev trc,00000] ORA-01017: invalid username/password; logon denied
4 ETW000 115 0.299989
4 ETW000 [ dblink ,00433] ***LOG BY2=>sql error 1017 performing CON [dblink#8 @ 433] 292 0.300281
4 ETW000 [ dblink ,00433] ***LOG BY0=>ORA-01017: invalid username/password; logon denied [dblink#8 @ 433]
4 ETW000 119 0.300400
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'DEV'"
Thanks
Sujit
hi sujit,
Use sapcontrol -nr 00 -function GetVersionInfo command to verfiy , kernel and dbsl files are of same patch .
paste the output.
moreover excute tnsping <SID> , also and paste the ouput.
Regards
Deepak
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Deepak,
Please find the output for first command:
sapcontrol -nr 00 -function GetVersionInfo
24.09.2012 16:21:48
GetVersionInfo
OK
Filename, VersionInfo, Time
/usr/sap/DEV/DVEBMGS00/exe/sapstartsrv, 700, patch 111, changelist 908140, optu, sun_64, 2007 05 22 00:47:52
/usr/sap/DEV/DVEBMGS00/exe/disp+work, 700, patch 111, changelist 908140, optu, sun_64, 2007 05 22 00:29:01
/usr/sap/DEV/DVEBMGS00/exe/gwrd, 700, patch 111, changelist 908140, optu, sun_64, 2007 05 22 00:30:07
/usr/sap/DEV/DVEBMGS00/exe/msg_server, 700, patch 111, changelist 908140, optu, sun_64, 2007 05 21 00:59:12
/usr/sap/DEV/DVEBMGS00/exe/dbadaslib.so, 700, patch 111, changelist 908140, optu, sun_64, 2007 05 21 23:39:06
/usr/sap/DEV/DVEBMGS00/exe/dboraslib.so, 700, patch 111, changelist 908140, optu, sun_64, 2007 05 19 00:56:23
/usr/sap/DEV/DVEBMGS00/exe/enserver, 700, patch 111, changelist 908140, optu, sun_64, 2007 05 21 01:00:32
/usr/sap/DEV/DVEBMGS00/exe/icman, 700, patch 111, changelist 908140, optu, sun_64, 2007 05 21 00:58:16
/usr/sap/DEV/DVEBMGS00/exe/jcontrol, 700, patch 111, changelist 908140, optu, sun_64, 2007 05 21 02:11:30
/usr/sap/DEV/DVEBMGS00/exe/jlaunch, 700, patch 111, changelist 908140, optu, sun_64, 2007 05 22 01:34:10
Also find the output for second command :
tnsping DEV
TNS Ping Utility for Solaris: Version 10.2.0.2.0 - Production on 24-SEP-2012 16:21:13
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
/oracle/DEV/102_64/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (COMMUNITY = SAP.WORLD) (PROTOCOL = TCP) (HOST = gentw) (PORT = 1527))) (CONNECT_DATA = (SID = DEV) (GLOBAL_NAME = DEV.WORLD)))
OK (10 msec)
Thanks
Sujit
Hi Roman,
Below is the output after executing the command
select sys_context('USERENV','SESSION_USER') from dual;
SYS_CONTEXT('USERENV','SESSION_USER')
--------------------------------------------------------------------------------
OPS$ORADEV
And here is the output after executing second command:
select sys_context('USERENV','AUTHENTICATED_IDENTITY') from dual;
SYS_CONTEXT('USERENV','AUTHENTICATED_IDENTITY')
--------------------------------------------------------------------------------
oradev
Thanks
Sujit
Hi Roman,
Please find the outputs after running the commands as DEVADM User:
select sys_context('USERENV','SESSION_USER') from dual;
SYS_CONTEXT('USERENV','SESSION_USER')
--------------------------------------------------------------------------------
OPS$DEVADM
select sys_context('USERENV','AUTHENTICATED_IDENTITY') from dual;
SYS_CONTEXT('USERENV','AUTHENTICATED_IDENTITY')
--------------------------------------------------------------------------------
devadm
Thanks
Sujit
Hi Roman,
Please find below Output as per your suggestion:
devadm> sqlplus /@DEV
SQL*Plus: Release 10.2.0.2.0 - Production on Mon Sep 24 18:45:10 2012
Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning and Data Mining options
SQL> select sys_context('USERENV','SESSION_USER') from dual;
SYS_CONTEXT('USERENV','SESSION_USER')
--------------------------------------------------------------------------------
OPS$DEVADM
SQL> select sys_context('USERENV','AUTHENTICATED_IDENTITY') from dual;
SYS_CONTEXT('USERENV','AUTHENTICATED_IDENTITY')
--------------------------------------------------------------------------------
devadm
SQL> select userid from sapuser;
USERID
--------------------------------------------------------------------------------
SAPSR3
Thanks
Sujit
Hi Roman,
Please find trans.log file .
Here as first error i see table or view doesn't exist and then authentication is failing.
Even i reseted the passwords but no luck.
Please find the trans.log file and suggets here:
4 ETW000 R3trans version 6.14 (release 700 - 26.10.11 - 13:00:00).
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 24.09.2012 - 15:45:46
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [ dev trc,00000] Mon Sep 24 15:45:46 2012 834 0.000834
4 ETW000 [ dev trc,00000] db_con_init called 59 0.000893
4 ETW000 [ dev trc,00000] create_con (con_name=R/3) 76 0.000969
4 ETW000 [ dev trc,00000] Loading DB library '/usr/sap/DEV/SYS/exe/run/dboraslib.so' ... 158 0.001127
4 ETW000 [ dev trc,00000] DlLoadLib() success: dlopen("/usr/sap/DEV/SYS/exe/run/dboraslib.so"), hdl 0
4 ETW000 77137 0.078264
4 ETW000 [ dev trc,00000] Library '/usr/sap/DEV/SYS/exe/run/dboraslib.so' loaded 143 0.078407
4 ETW000 [ dev trc,00000] function DbSlExpFuns loaded from library /usr/sap/DEV/SYS/exe/run/dboraslib.so
4 ETW000 124 0.078531
4 ETW000 [ dev trc,00000] Version of '/usr/sap/DEV/SYS/exe/run/dboraslib.so' is "700.08", patchlevel (0.324)
4 ETW000 1369 0.079900
4 ETW000 [ dev trc,00000] function dsql_db_init loaded from library /usr/sap/DEV/SYS/exe/run/dboraslib.so
4 ETW000 112 0.080012
4 ETW000 [ dev trc,00000] function dbdd_exp_funs loaded from library /usr/sap/DEV/SYS/exe/run/dboraslib.so
4 ETW000 333 0.080345
4 ETW000 [ dev trc,00000] New connection 0 created 126 0.080471
4 ETW000 [ dev trc,00000] 000: name = R/3, con_id = -000000001, state = DISCONNECTED, tx = NO , hc = NO , perm = YES,
4 ETW000 reco = NO , frco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 174 0.080645
4 ETW000 [ dev trc,00000] db_con_connect (con_name=R/3) 203 0.080848
4 ETW000 [ dev trc,00000] find_con_by_name found the following connection for reuse: 73 0.080921
4 ETW000 [ dev trc,00000] 000: name = R/3, con_id = 000000000, state = DISCONNECTED, tx = NO , hc = NO , perm = YES,
4 ETW000 reco = NO , frco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 163 0.081084
4 ETW000 [ dev trc,00000] -->oci_init1 841 0.081925
4 ETW000 [ dev trc,00000] Oracle Client Version: '10.2.0.2.0', (dbsl 700 131011, non-unicode) 316 0.082241
4 ETW000 [ dev trc,00000] Default connection: tnsname ='DEV' 102 0.082343
4 ETW000 [ dev trc,00000] -->oci_initialize(con=0, char='WE8DEC', nchar='AL16UTF16', uc_ln=1) 128 0.082471
4 ETW000 [ dev trc,00000] Application info callback registered. 77 0.082548
4 ETW000 [ dev trc,00000] OCIEnvCreate(mode=0=OCI_DEFAULT) returned 0 (for default NLS handle)
4 ETW000 14505 0.097053
4 ETW000 [ dev trc,00000] OCIHandleAlloc(OCI_HTYPE_ERROR, con=0, ErrHp=1012d42a0) 161 0.097214
4 ETW000 [ dev trc,00000] OCIHandleAlloc(OCI_HTYPE_ERROR, con=0, ErrBt=1012e4bf8) 108 0.097322
4 ETW000 [ dev trc,00000] NLS env.: lang=414D45524943414E 440 0.097762
4 ETW000 [ dev trc,00000] terr=414D4552494341 85 0.097847
4 ETW000 [ dev trc,00000] char=55544638 77 0.097924
4 ETW000 [ dev trc,00000] Client NLS setting (by OCINlsGetInfo): con=0, 'AMERICAN_AMERICA.UTF8'
4 ETW000 110 0.098034
4 ETW000 [ dev trc,00000] charset='WE8DEC', ncharset='AL16UTF16', UNI_ASC=FALSE 68 0.098102
4 ETW000 [ dev trc,00000] default client setting: NLS_CHAR=charset='UTF8' 71 0.098173
4 ETW000 [ dev trc,00000] Logon as OPS$-user to get SAPSR3's password 127 0.098300
4 ETW000 [ dev trc,00000] Connecting as /@DEV on connection 0 (nls 0) ... (dbsl 700 131011, non-unicode)
4 ETW000 142 0.098442
4 ETW000 [ dev trc,00000] Allocating service context handle for con=0 249 0.098691
4 ETW000 [ dev trc,00000] Allocating server context handle 91 0.098782
4 ETW000 [ dev trc,00000] Attaching to DB Server DEV (con=0,svchp=1012e4b28,srvhp=1012e79c8) 169 0.098951
4 ETW000 [ dev trc,00000] Assigning server context 1012e79c8 to service context 1012e4b28 118129 0.217080
4 ETW000 [ dev trc,00000] Allocating user session handle 145 0.217225
4 ETW000 [ dev trc,00000] Starting user session: OCISessionBegin(con=0, usr='/',svchp=1012e4b28, srvhp=1012e79c8, usrhp=1012d4ab8)
4 ETW000 162 0.217387
4 ETW000 [ dev trc,00000] Assigning user session 1012d4ab8 to service context 1012e4b28 43097 0.260484
4 ETW000 [ dev trc,00000] -->oci_prepare_stmt(con=0, len=52, stp=1012f04e8) 251 0.260735
4 ETW000 [ dev trc,00000] BEGIN DBMS_APPLICATION_INFO.SET_MODULE(:A0,:A1);END;
4 ETW000 124 0.260859
4 ETW000 [ dev trc,00000] - oci_bind ( 0: SQLT_STR, l=300, con=0, stp=1012f04e8, vp=ffffffff7d0934bc,ip=ffffffff7d093340,rlp=0,rcp=0)
4 ETW000 485 0.261344
4 ETW000 [ dev trc,00000] - oci_bind ( 1: SQLT_STR, l=300, con=0, stp=1012f04e8, vp=ffffffff7d093390,ip=ffffffff7d093342,rlp=0,rcp=0)
4 ETW000 208 0.261552
4 ETW000 [ dev trc,00000] CbApplInfoGet() failed (ignored 1). 114 0.261666
4 ETW000 [ dev trc,00000] -->oci_prepare_stmt(con=0, len=54, stp=1012f1540) 80 0.261746
4 ETW000 [ dev trc,00000] BEGIN DBMS_APPLICATION_INFO.SET_CLIENT_INFO(:A0); END;
4 ETW000 117 0.261863
4 ETW000 [ dev trc,00000] - oci_bind ( 0: SQLT_STR, l= 20, con=0, stp=1012f1540, vp=ffffffff7d093344,ip=0,rlp=0,rcp=0)
4 ETW000 206 0.262069
4 ETW000 [ dev trc,00000] -->oci_execute_stmt(con=0, stp=1012f1540, iters=1, rowoff=0, dml_batch_errors=0)
4 ETW000 163 0.262232
4 ETW000 [ dev trc,00000] <--oci_execute_stmt(rc=0, iters-errors = 1-0) [time 0,043s] 42874 0.305106
4 ETW000 [ dev trc,00000] -->oci_prepare_stmt(con=0, len=0, stp=1012f1540) 313 0.305419
4 ETW000 [ dev trc,00000] SELECT SID FROM V$MYSTAT WHERE ROWNUM<2
4 ETW000 125 0.305544
4 ETW000 [ dev trc,00000] -->oci_define ( 0: SQLT_INT, l= 4, con=0, stp=1012f1540, vp=ffffffff7fffeff4,ip=ffffffff7fffefb6,rlp=0,rcp=0)
4 ETW000 279 0.305823
4 ETW000 [ dev trc,00000] -->oci_execute_stmt(con=0, stp=1012f1540, iters=1, rowoff=0, dml_batch_errors=0)
4 ETW000 224 0.306047
4 ETW000 [ dev trc,00000] <--oci_execute_stmt(rc=0, iters-errors = 1-0) [time 0,042s] 41545 0.347592
4 ETW000 [ dev trc,00000] Now '/@DEV' is connected: con=0, nls_hdl=0, session_id=72. 116 0.347708
4 ETW000 [ dev trc,00000] -->oci_prepare_stmt(con=0, len=0, stp=1012f1540) 119 0.347827
4 ETW000 [ dev trc,00000] ALTER SESSION SET NLS_SORT = BINARY
4 ETW000 122 0.347949
4 ETW000 [ dev trc,00000] -->oci_execute_stmt(con=0, stp=1012f1540, iters=1, rowoff=0, dml_batch_errors=0)
4 ETW000 161 0.348110
4 ETW000 [ dev trc,00000] <--oci_execute_stmt(rc=0, iters-errors = 1-0) [time 0,002s] 2187 0.350297
4 ETW000 [ dev trc,00000] -->oci_prepare_stmt(con=0, len=0, stp=1012f1540) 181 0.350478
4 ETW000 [ dev trc,00000] SELECT USERID,PASSWD FROM SAPUSER WHERE USERID IN (:A0,:A1)
4 ETW000 121 0.350599
4 ETW000 [ dev trc,00000] - oci_bind ( 0: SQLT_STR, l=256, con=0, stp=1012f1540, vp=ffffffff7d1aed74,ip=0,rlp=0,rcp=0)
4 ETW000 225 0.350824
4 ETW000 [ dev trc,00000] - oci_bind ( 1: SQLT_STR, l=256, con=0, stp=1012f1540, vp=ffffffff7ffff0a0,ip=0,rlp=0,rcp=0)
4 ETW000 133 0.350957
4 ETW000 [ dev trc,00000] -->oci_define ( 0: SQLT_STR, l=256, con=0, stp=1012f1540, vp=ffffffff7fffef30,ip=ffffffff7ffff1a2,rlp=0,rcp=0)
4 ETW000 143 0.351100
4 ETW000 [ dev trc,00000] -->oci_define ( 1: SQLT_AFC, l=256, con=0, stp=1012f1540, vp=ffffffff7fffee30,ip=ffffffff7fffee2e,rlp=0,rcp=0)
4 ETW000 155 0.351255
4 ETW000 [ dev trc,00000] -->oci_execute_stmt(con=0, stp=1012f1540, iters=1, rowoff=0, dml_batch_errors=0)
4 ETW000 123 0.351378
4 ETW000 [ dev trc,00000] OCIStmtExecute() failed with -1=OCI_ERROR 4048 0.355426
4 ETW000 [ dev trc,00000] SQL error 942: 76 0.355502
4 ETW000 [ dev trc,00000] ORA-00942: table or view does not exist
4 ETW000 159 0.355661
4 ETW000 [ dev trc,00000] <--oci_execute_stmt(rc=942, iters-errors = 1-0) [time 0,004s] 77 0.355738
4 ETW000 [ dbsloci.,00000] *** ERROR => ORA-942 when accessing table SAPUSER 103 0.355841
4 ETW000 [ dev trc,00000] set_ocica() -> SQL error code 942 80 0.355921
4 ETW000 [ dev trc,00000] -->oci_get_errmsg (con=0, rc=942) 118 0.356039
4 ETW000 [ dev trc,00000] OCIErrorGet -> SQL error code: 942 83 0.356122
4 ETW000 [ dev trc,00000] ORA-00942: table or view does not exist
4 ETW000 116 0.356238
4 ETW000 [ dev trc,00000] Disconnecting from connection 0 ... 70 0.356308
4 ETW000 [ dev trc,00000] Rolling back transaction ... 170 0.356478
4 ETW000 [ dev trc,00000] Closing user session (con=0,svchp=1012e4b28,usrhp=1012d4ab8) 497 0.356975
4 ETW000 [ dev trc,00000] Disconnected (con=0) from ORACLE. 2615 0.359590
4 ETW000 [ dev trc,00000] Info: 99=DBSL_ERR_DB, oerr=942, try to connect with default password.
4 ETW000 154 0.359744
4 ETW000 [ dev trc,00000] Connecting as SAPSR3/<pwd>@DEV on connection 0 (nls 0) ... (dbsl 700 131011, non-unicode)
4 ETW000 112 0.359856
4 ETW000 [ dev trc,00000] Assigning username to user session: con=0, usrhp=1012d4ab8 74 0.359930
4 ETW000 [ dev trc,00000] Assigning password to user session: con=0, usrhp=1012d4ab8 106 0.360036
4 ETW000 [ dev trc,00000] Starting user session: OCISessionBegin(con=0, usr=SAPSR3/<pwd>, svchp=1012e4b28, srvhp=1012e79c8, usrhp=1012d4ab8)
4 ETW000 130 0.360166
4 ETW000 [ dev trc,00000] OCISessionBegin(OCI_DEFAULT) failed with -1=OCI_ERROR 31030 0.391196
4 ETW000 [ dev trc,00000] OCISessionBegin(OCI_DEFAULT) failed with SQL error 1017: 111 0.391307
4 ETW000 [ dev trc,00000] ORA-01017: invalid username/password; logon denied
4 ETW000 118 0.391425
4 ETW000 [ dbsloci.,00000] *** ERROR => CONNECT failed with sql error '1017' 78 0.391503
4 ETW000 [ dev trc,00000] set_ocica() -> SQL error code 1017 98 0.391601
4 ETW000 [ dev trc,00000] -->oci_get_errmsg (con=0, rc=1017) 76 0.391677
4 ETW000 [ dev trc,00000] OCIErrorGet -> SQL error code: 1017 77 0.391754
4 ETW000 [ dev trc,00000] ORA-01017: invalid username/password; logon denied
4 ETW000 115 0.391869
4 ETW000 [ dblink ,00433] ***LOG BY2=>sql error 1017 performing CON [dblink#8 @ 433] 259 0.392128
4 ETW000 [ dblink ,00433] ***LOG BY0=>ORA-01017: invalid username/password; logon denied [dblink#8 @ 433]
4 ETW000 119 0.392247
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'DEV'"
Thanks
Sujit
Hi Roman,
Please find current "trans.log" file .
I am posting only error part here.Please check .
4 ETW000 [ dev trc,00000] <--oci_execute_stmt(rc=0, iters-errors = 1-0) [time 0,001s] 1081 0.337174
4 ETW000 [ dev trc,00000] Got SAPSR3's password from OPS$-user 101 0.337275
4 ETW000 [ dev trc,00000] Disconnecting from connection 0 ... 74 0.337349
4 ETW000 [ dev trc,00000] Rolling back transaction ... 166 0.337515
4 ETW000 [ dev trc,00000] Closing user session (con=0,svchp=1012e4d98,usrhp=1012d4d28) 493 0.338008
4 ETW000 [ dev trc,00000] Disconnected (con=0) from ORACLE. 2103 0.340111
4 ETW000 [ dev trc,00000] Connect as 'SAPSR3' with found password from table SAPUSER 82 0.340193
4 ETW000 [ dev trc,00000] Connecting as SAPSR3/<pwd>@DEV on connection 0 (nls 0) ... (dbsl 700 131011, non-unicode)
4 ETW000 118 0.340311
4 ETW000 [ dev trc,00000] Assigning username to user session: con=0, usrhp=1012d4d28 72 0.340383
4 ETW000 [ dev trc,00000] Assigning password to user session: con=0, usrhp=1012d4d28 85 0.340468
4 ETW000 [ dev trc,00000] Starting user session: OCISessionBegin(con=0, usr=SAPSR3/<pwd>, svchp=1012e4d98, srvhp=1012e7c38, usrhp=1012d4d28)
4 ETW000 148 0.340616
4 ETW000 [ dev trc,00000] OCISessionBegin(OCI_DEFAULT) failed with -1=OCI_ERROR 22917 0.363533
4 ETW000 [ dev trc,00000] OCISessionBegin(OCI_DEFAULT) failed with SQL error 1017: 160 0.363693
4 ETW000 [ dev trc,00000] ORA-01017: invalid username/password; logon denied
4 ETW000 121 0.363814
4 ETW000 [ dbsloci.,00000] *** ERROR => CONNECT failed with sql error '1017' 80 0.363894
4 ETW000 [ dev trc,00000] set_ocica() -> SQL error code 1017 76 0.363970
4 ETW000 [ dev trc,00000] -->oci_get_errmsg (con=0, rc=1017) 139 0.364109
4 ETW000 [ dev trc,00000] OCIErrorGet -> SQL error code: 1017 86 0.364195
4 ETW000 [ dev trc,00000] ORA-01017: invalid username/password; logon denied
4 ETW000 115 0.364310
4 ETW000 [ dblink ,00433] ***LOG BY2=>sql error 1017 performing CON [dblink#8 @ 433] 289 0.364599
4 ETW000 [ dblink ,00433] ***LOG BY0=>ORA-01017: invalid username/password; logon denied [dblink#8 @ 433]
4 ETW000 120 0.364719
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'DEV'"
Thanks
Sujit
Please read Note 1576837 - ORA-01017invalid username/password;
Even i reseted the passwords but no luck.
What this mean? What did you do?
Roman
Hi Roman,
I have gone through the note and tried to reset the password of SAPSR3 schema owner and even reseted the password for "SYSTEM" user and tried command R3trans -d but getting the same error.
Now for testing purpose i checked to connect to database using user "SYSTEM" and "SAPSR3" with the new passwords which i reseted and it is connecting in both the cases.
Please find the same:
devadm> sqlplus
SQL*Plus: Release 10.2.0.2.0 - Production on Tue Sep 25 13:28:48 2012
Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
Enter user-name: system
Enter password:
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning and Data Mining options
SQL> exit
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning and Data Mining options
devadm> sqlplus
SQL*Plus: Release 10.2.0.2.0 - Production on Tue Sep 25 13:30:14 2012
Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
Enter user-name: SAPSR3
Enter password:
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning and Data Mining options
SQL> exit
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning and Data Mining options
Thanks
Sujit
Please read the solution for scenario B in note 1576837. You need to syncronize passwords in SAPUSER table with SAPSR3 user password. If you do not use this method then the password will not get updated both in the oracle dictionary and SAPUSER table.
Run
brconnect -u system/<password> -f chpass -o SAPSR3 -p <password>
to synhronize.
Regards
Roman
Hi Roman,
I changed the password of SAPSR3 User using BRTOOLS and now again i ran above command and please find below output after running the command
BR0801I BRCONNECT 7.00 (24)
BR0280I BRCONNECT time stamp: 2012-09-25 13.54.18
BR0828I Changing password for database user SAPSR3
BR0280I BRCONNECT time stamp: 2012-09-25 13.54.18
BR0256I Enter 'c[ont]' to continue, 's[top]' to cancel BRCONNECT:
c
BR0280I BRCONNECT time stamp: 2012-09-25 13.54.23
BR0257I Your reply: 'c'
BR0259I Program execution will be continued...
BR0280I BRCONNECT time stamp: 2012-09-25 13.54.23
BR0829I Password changed successfully in database for user SAPSR3
BR0830I Password changed successfully in table OPS$DEVADM.SAPUSER for user SAPSR3
BR0280I BRCONNECT time stamp: 2012-09-25 13.54.23
BR0802I BRCONNECT completed successfully
devadm> R3trans -d
This is R3trans version 6.14 (release 700 - 26.10.11 - 13:00:00).
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'DEV'"
R3trans finished (0012).
Thanks
Sujit
Hi Roman,
Please find trans.log and this time i am going to provide the log from the directory where i ran R3trans -d command as you told.
devadm> cat trans.log
4 ETW000 R3trans version 6.14 (release 700 - 26.10.11 - 13:00:00).
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 25.09.2012 - 14:49:42
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [ dev trc,00000] Tue Sep 25 14:49:42 2012 833 0.000833
4 ETW000 [ dev trc,00000] db_con_init called 59 0.000892
4 ETW000 [ dev trc,00000] create_con (con_name=R/3) 76 0.000968
4 ETW000 [ dev trc,00000] Loading DB library '/usr/sap/DEV/SYS/exe/run/dboraslib.so' ... 160 0.001128
4 ETW000 [ dev trc,00000] DlLoadLib() success: dlopen("/usr/sap/DEV/SYS/exe/run/dboraslib.so"), hdl 0
4 ETW000 79005 0.080133
4 ETW000 [ dev trc,00000] Library '/usr/sap/DEV/SYS/exe/run/dboraslib.so' loaded 166 0.080299
4 ETW000 [ dev trc,00000] function DbSlExpFuns loaded from library /usr/sap/DEV/SYS/exe/run/dboraslib.so
4 ETW000 123 0.080422
4 ETW000 [ dev trc,00000] Version of '/usr/sap/DEV/SYS/exe/run/dboraslib.so' is "700.08", patchlevel (0.324)
4 ETW000 1399 0.081821
4 ETW000 [ dev trc,00000] function dsql_db_init loaded from library /usr/sap/DEV/SYS/exe/run/dboraslib.so
4 ETW000 113 0.081934
4 ETW000 [ dev trc,00000] function dbdd_exp_funs loaded from library /usr/sap/DEV/SYS/exe/run/dboraslib.so
4 ETW000 336 0.082270
4 ETW000 [ dev trc,00000] New connection 0 created 125 0.082395
4 ETW000 [ dev trc,00000] 000: name = R/3, con_id = -000000001, state = DISCONNECTED, tx = NO , hc = NO , perm = YES,
4 ETW000 reco = NO , frco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 174 0.082569
4 ETW000 [ dev trc,00000] db_con_connect (con_name=R/3) 207 0.082776
4 ETW000 [ dev trc,00000] find_con_by_name found the following connection for reuse: 73 0.082849
4 ETW000 [ dev trc,00000] 000: name = R/3, con_id = 000000000, state = DISCONNECTED, tx = NO , hc = NO , perm = YES,
4 ETW000 reco = NO , frco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 162 0.083011
4 ETW000 [ dev trc,00000] -->oci_init1 842 0.083853
4 ETW000 [ dev trc,00000] Oracle Client Version: '10.2.0.2.0', (dbsl 700 131011, non-unicode) 334 0.084187
4 ETW000 [ dev trc,00000] Default connection: tnsname ='DEV' 78 0.084265
4 ETW000 [ dev trc,00000] -->oci_initialize(con=0, char='WE8DEC', nchar='AL16UTF16', uc_ln=1) 127 0.084392
4 ETW000 [ dev trc,00000] Application info callback registered. 77 0.084469
4 ETW000 [ dev trc,00000] OCIEnvCreate(mode=0=OCI_DEFAULT) returned 0 (for default NLS handle)
4 ETW000 96718 0.181187
4 ETW000 [ dev trc,00000] OCIHandleAlloc(OCI_HTYPE_ERROR, con=0, ErrHp=1012d4510) 166 0.181353
4 ETW000 [ dev trc,00000] OCIHandleAlloc(OCI_HTYPE_ERROR, con=0, ErrBt=1012e4e68) 114 0.181467
4 ETW000 [ dev trc,00000] NLS env.: lang=414D45524943414E 383 0.181850
4 ETW000 [ dev trc,00000] terr=414D4552494341 86 0.181936
4 ETW000 [ dev trc,00000] char=55544638 75 0.182011
4 ETW000 [ dev trc,00000] Client NLS setting (by OCINlsGetInfo): con=0, 'AMERICAN_AMERICA.UTF8'
4 ETW000 111 0.182122
4 ETW000 [ dev trc,00000] charset='WE8DEC', ncharset='AL16UTF16', UNI_ASC=FALSE 69 0.182191
4 ETW000 [ dev trc,00000] default client setting: NLS_CHAR=charset='UTF8' 70 0.182261
4 ETW000 [ dev trc,00000] Logon as OPS$-user to get SAPSR3's password 128 0.182389
4 ETW000 [ dev trc,00000] Connecting as /@DEV on connection 0 (nls 0) ... (dbsl 700 131011, non-unicode)
4 ETW000 143 0.182532
4 ETW000 [ dev trc,00000] Allocating service context handle for con=0 232 0.182764
4 ETW000 [ dev trc,00000] Allocating server context handle 99 0.182863
4 ETW000 [ dev trc,00000] Attaching to DB Server DEV (con=0,svchp=1012e4d98,srvhp=1012e7c38) 173 0.183036
4 ETW000 [ dev trc,00000] Assigning server context 1012e7c38 to service context 1012e4d98 118027 0.301063
4 ETW000 [ dev trc,00000] Allocating user session handle 149 0.301212
4 ETW000 [ dev trc,00000] Starting user session: OCISessionBegin(con=0, usr='/',svchp=1012e4d98, srvhp=1012e7c38, usrhp=1012d4d28)
4 ETW000 160 0.301372
4 ETW000 [ dev trc,00000] Assigning user session 1012d4d28 to service context 1012e4d98 34880 0.336252
4 ETW000 [ dev trc,00000] -->oci_prepare_stmt(con=0, len=52, stp=1012f0758) 258 0.336510
4 ETW000 [ dev trc,00000] BEGIN DBMS_APPLICATION_INFO.SET_MODULE(:A0,:A1);END;
4 ETW000 124 0.336634
4 ETW000 [ dev trc,00000] - oci_bind ( 0: SQLT_STR, l=300, con=0, stp=1012f0758, vp=ffffffff7d0934bc,ip=ffffffff7d093340,rlp=0,rcp=0)
4 ETW000 488 0.337122
4 ETW000 [ dev trc,00000] - oci_bind ( 1: SQLT_STR, l=300, con=0, stp=1012f0758, vp=ffffffff7d093390,ip=ffffffff7d093342,rlp=0,rcp=0)
4 ETW000 303 0.337425
4 ETW000 [ dev trc,00000] CbApplInfoGet() failed (ignored 1). 124 0.337549
4 ETW000 [ dev trc,00000] -->oci_prepare_stmt(con=0, len=54, stp=1012f17b0) 79 0.337628
4 ETW000 [ dev trc,00000] BEGIN DBMS_APPLICATION_INFO.SET_CLIENT_INFO(:A0); END;
4 ETW000 116 0.337744
4 ETW000 [ dev trc,00000] - oci_bind ( 0: SQLT_STR, l= 20, con=0, stp=1012f17b0, vp=ffffffff7d093344,ip=0,rlp=0,rcp=0)
4 ETW000 208 0.337952
4 ETW000 [ dev trc,00000] -->oci_execute_stmt(con=0, stp=1012f17b0, iters=1, rowoff=0, dml_batch_errors=0)
4 ETW000 165 0.338117
4 ETW000 [ dev trc,00000] <--oci_execute_stmt(rc=0, iters-errors = 1-0) [time 0,002s] 2332 0.340449
4 ETW000 [ dev trc,00000] -->oci_prepare_stmt(con=0, len=0, stp=1012f17b0) 262 0.340711
4 ETW000 [ dev trc,00000] SELECT SID FROM V$MYSTAT WHERE ROWNUM<2
4 ETW000 125 0.340836
4 ETW000 [ dev trc,00000] -->oci_define ( 0: SQLT_INT, l= 4, con=0, stp=1012f17b0, vp=ffffffff7fffee24,ip=ffffffff7fffede6,rlp=0,rcp=0)
4 ETW000 262 0.341098
4 ETW000 [ dev trc,00000] -->oci_execute_stmt(con=0, stp=1012f17b0, iters=1, rowoff=0, dml_batch_errors=0)
4 ETW000 222 0.341320
4 ETW000 [ dev trc,00000] <--oci_execute_stmt(rc=0, iters-errors = 1-0) [time 0,001s] 1358 0.342678
4 ETW000 [ dev trc,00000] Now '/@DEV' is connected: con=0, nls_hdl=0, session_id=71. 105 0.342783
4 ETW000 [ dev trc,00000] -->oci_prepare_stmt(con=0, len=0, stp=1012f17b0) 117 0.342900
4 ETW000 [ dev trc,00000] ALTER SESSION SET NLS_SORT = BINARY
4 ETW000 122 0.343022
4 ETW000 [ dev trc,00000] -->oci_execute_stmt(con=0, stp=1012f17b0, iters=1, rowoff=0, dml_batch_errors=0)
4 ETW000 145 0.343167
4 ETW000 [ dev trc,00000] <--oci_execute_stmt(rc=0, iters-errors = 1-0) [time 0,001s] 1229 0.344396
4 ETW000 [ dev trc,00000] -->oci_prepare_stmt(con=0, len=0, stp=1012f17b0) 177 0.344573
4 ETW000 [ dev trc,00000] SELECT USERID,PASSWD FROM SAPUSER WHERE USERID IN (:A0,:A1)
4 ETW000 123 0.344696
4 ETW000 [ dev trc,00000] - oci_bind ( 0: SQLT_STR, l=256, con=0, stp=1012f17b0, vp=ffffffff7d1aed74,ip=0,rlp=0,rcp=0)
4 ETW000 223 0.344919
4 ETW000 [ dev trc,00000] - oci_bind ( 1: SQLT_STR, l=256, con=0, stp=1012f17b0, vp=ffffffff7fffeed0,ip=0,rlp=0,rcp=0)
4 ETW000 125 0.345044
4 ETW000 [ dev trc,00000] -->oci_define ( 0: SQLT_STR, l=256, con=0, stp=1012f17b0, vp=ffffffff7fffed60,ip=ffffffff7fffefd2,rlp=0,rcp=0)
4 ETW000 144 0.345188
4 ETW000 [ dev trc,00000] -->oci_define ( 1: SQLT_AFC, l=256, con=0, stp=1012f17b0, vp=ffffffff7fffec60,ip=ffffffff7fffec5e,rlp=0,rcp=0)
4 ETW000 151 0.345339
4 ETW000 [ dev trc,00000] -->oci_execute_stmt(con=0, stp=1012f17b0, iters=1, rowoff=0, dml_batch_errors=0)
4 ETW000 144 0.345483
4 ETW000 [ dev trc,00000] <--oci_execute_stmt(rc=0, iters-errors = 1-0) [time 0,001s] 1073 0.346556
4 ETW000 [ dev trc,00000] Got SAPSR3's password from OPS$-user 103 0.346659
4 ETW000 [ dev trc,00000] Disconnecting from connection 0 ... 76 0.346735
4 ETW000 [ dev trc,00000] Rolling back transaction ... 151 0.346886
4 ETW000 [ dev trc,00000] Closing user session (con=0,svchp=1012e4d98,usrhp=1012d4d28) 575 0.347461
4 ETW000 [ dev trc,00000] Disconnected (con=0) from ORACLE. 2159 0.349620
4 ETW000 [ dev trc,00000] Connect as 'SAPSR3' with found password from table SAPUSER 80 0.349700
4 ETW000 [ dev trc,00000] Connecting as SAPSR3/<pwd>@DEV on connection 0 (nls 0) ... (dbsl 700 131011, non-unicode)
4 ETW000 118 0.349818
4 ETW000 [ dev trc,00000] Assigning username to user session: con=0, usrhp=1012d4d28 72 0.349890
4 ETW000 [ dev trc,00000] Assigning password to user session: con=0, usrhp=1012d4d28 88 0.349978
4 ETW000 [ dev trc,00000] Starting user session: OCISessionBegin(con=0, usr=SAPSR3/<pwd>, svchp=1012e4d98, srvhp=1012e7c38, usrhp=1012d4d28)
4 ETW000 145 0.350123
4 ETW000 [ dev trc,00000] OCISessionBegin(OCI_DEFAULT) failed with -1=OCI_ERROR 29531 0.379654
4 ETW000 [ dev trc,00000] OCISessionBegin(OCI_DEFAULT) failed with SQL error 1017: 164 0.379818
4 ETW000 [ dev trc,00000] ORA-01017: invalid username/password; logon denied
4 ETW000 122 0.379940
4 ETW000 [ dbsloci.,00000] *** ERROR => CONNECT failed with sql error '1017' 79 0.380019
4 ETW000 [ dev trc,00000] set_ocica() -> SQL error code 1017 75 0.380094
4 ETW000 [ dev trc,00000] -->oci_get_errmsg (con=0, rc=1017) 114 0.380208
4 ETW000 [ dev trc,00000] OCIErrorGet -> SQL error code: 1017 113 0.380321
4 ETW000 [ dev trc,00000] ORA-01017: invalid username/password; logon denied
4 ETW000 119 0.380440
4 ETW000 [ dblink ,00433] ***LOG BY2=>sql error 1017 performing CON [dblink#8 @ 433] 251 0.380691
4 ETW000 [ dblink ,00433] ***LOG BY0=>ORA-01017: invalid username/password; logon denied [dblink#8 @ 433]
4 ETW000 118 0.380809
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'DEV'"
Thank you Roman for all your quick responses!!!
Thanks
Sujit
Hi Roman,
Please find the output :
devadm> sqlplus /@DEV
SQL*Plus: Release 10.2.0.2.0 - Production on Tue Sep 25 15:40:16 2012
Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning and Data Mining options
SQL> select userid from SAPUSER;
USERID
--------------------------------------------------------------------------------
SAPSR3
Thanks
Sujit
Hi Henry,
I dropped table SAPUSER and created again and inserted SAPSR3 and respective password.
Then i restarted the database and tried command R3trans -d but still facing the same error.
devadm> R3trans -d
This is R3trans version 6.14 (release 700 - 26.10.11 - 13:00:00).
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'DEV'"
R3trans finished (0012).
Thanks
Sujit
HI Sujit,
Please try to run oradbusr.sql and sapdba_role.sql. usually the issue with connection to Oracle with R3trans related with this two scripts.
oradbusr.sql is in note 50088 and sapdba_role.sql is in 134592.
Run as oradev and extract the both files on the main directory (/oracle/DEV)
oradbusr10.ZIP
sapdba_role_ora10.SAR
sqlplus /NOLOG @oradbusr.sql SAPSR3 UNIX DEV x
sqlplus /nolog @sapdba_role SR3
Just to reconfirm could you run this comment
sqlplus /nolog
connect / as sysdba
select username from dba_users;
You should see these four users
OPS$DEVADM
SAPSR3
OPS$SAPSERVICEDEV
OPS$ORADEV
Best Regards,
Achmad
Hi Achmad,
I can see above listed Users when i ran the SQL Command.
please find below output:
devadm> sqlplus /nolog
SQL*Plus: Release 10.2.0.2.0 - Production on Wed Sep 26 16:21:57 2012
Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
SQL> connect /as sysdba
Connected.
SQL> select username from dba_users;
USERNAME
------------------------------
OUTLN
OPS$DEVADM
OPS$SAPSERVICEDEV
OPS$ORADEV
SYS
SYSTEM
SAPSR3
TSMSYS
DIP
DBSNMP
10 rows selected.
Thanks
Sujit
Hi Sujit,
The script oradbusr.sql and sapdba_role.sql do a lot of things related with SAP connection to DB.
Because all checks here are indicate no issue with SAP Connection to DB.
After those scripts if still got an issue, then I believe the problem resides in something else.
Also one thing, could you run this command one more time:
select username, account_status, lock_date from dba_users;
USERNAME ACCOUNT_STATUS LOCK_DATE
------------------------------ -------------------------------- ---------------
SYSTEM OPEN
SYS OPEN
OPS$DEVADM OPEN
SAPSR3 OPEN
OPS$ORADEV OPEN
OPS$SAPSERVICEDEV OPEN
Makesure got similar like above.
Regards,
Achmad
Hi Achmad,
Please find below output after running the above command:
SQL> select username, account_status, lock_date from dba_users;
USERNAME ACCOUNT_STATUS LOCK_DATE
------------------------------ -------------------------------- ---------------
OUTLN OPEN
OPS$DEVADM OPEN
OPS$SAPSERVICEDEV OPEN
OPS$ORADEV OPEN
SYS OPEN
SYSTEM OPEN
SAPSR3 OPEN
TSMSYS EXPIRED
DIP EXPIRED
DBSNMP EXPIRED
Thanks
Sujit
Hi Sujit,
Re-run oradbusr.sql.
please read these notes:
Note 361641 - Creating OPS$ users on UNIX
Note 400241 - Problems with ops$ or sapr3 connect to Oracle
I am not sure why suddenly you lost connection to synonym file of SAPUSER.
Run this sql comment too:
SQL> select * from dba_synonyms where table_name = 'SAPUSER';
You should get these two:
OPS$SAPSERVICEDEV SAPUSER
OPS$DEVADM SAPUSER
Regards,
Achmad
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
HI Sujit,
Please try to run oradbusr.sql and sapdba_role.sql. usually the issue with connection to Oracle with R3trans related with this two scripts.
oradbusr.sql is in note 50088 and sapdba_role.sql is in 134592.
Run as oradev and extract the both files on the main directory (/oracle/DEV)
oradbusr10.ZIP
sapdba_role_ora10.SAR
sqlplus /NOLOG @oradbusr.sql SAPSR3 UNIX DEV x
sqlplus /nolog @sapdba_role SR3
Just to reconfirm could you run this comment
sqlplus /nolog
connect / as sysdba
select username from dba_users;
You should see these four users
OPS$DEVADM
SAPSR3
OPS$SAPSERVICEDEV
OPS$ORADEV
Best Regards,
Achmad
have you reset ops$devadm password via BRtools? if not, try to do it.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
4 ETW000 [ dev trc,00000] SELECT USERID,PASSWD FROM SAPUSER WHERE USERID IN (:A0,:A1)
4 ETW000 121 0.270190
4 ETW000 [ dev trc,00000] - oci_bind ( 0: SQLT_STR, l=256, con=0, stp=1012f1540, vp=ffffffff7d1aed74,ip=0,rlp=0,rcp=0)
4 ETW000 218 0.270408
4 ETW000 [ dev trc,00000] - oci_bind ( 1: SQLT_STR, l=256, con=0, stp=1012f1540, vp=ffffffff7ffff050,ip=0,rlp=0,rcp=0)
4 ETW000 124 0.270532
4 ETW000 [ dev trc,00000] -->oci_define ( 0: SQLT_STR, l=256, con=0, stp=1012f1540, vp=ffffffff7fffeee0,ip=ffffffff7ffff152,rlp=0,rcp=0)
4 ETW000 147 0.270679
4 ETW000 [ dev trc,00000] -->oci_define ( 1: SQLT_AFC, l=256, con=0, stp=1012f1540, vp=ffffffff7fffede0,ip=ffffffff7fffedde,rlp=0,rcp=0)
4 ETW000 148 0.270827
4 ETW000 [ dev trc,00000] -->oci_execute_stmt(con=0, stp=1012f1540, iters=1, rowoff=0, dml_batch_errors=0)
4 ETW000 120 0.270947
4 ETW000 [ dev trc,00000] OCIStmtExecute() failed with -1=OCI_ERROR 2367 0.273314
4 ETW000 [ dev trc,00000] SQL error 942: 76 0.273390
4 ETW000 [ dev trc,00000] ORA-00942: table or view does not exist
Please check schema under which this table exists with sqlplus
select owner, table_name from dba_tables where table_name = 'SAPUSER';
Regards
Roman
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Roman,
Please find trans.log file after executing command R3trans -d .
4 ETW000 R3trans version 6.14 (release 700 - 26.10.11 - 13:00:00).
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 21.09.2012 - 19:16:17
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [ dev trc,00000] Fri Sep 21 19:16:17 2012 806 0.000806
4 ETW000 [ dev trc,00000] db_con_init called 60 0.000866
4 ETW000 [ dev trc,00000] create_con (con_name=R/3) 76 0.000942
4 ETW000 [ dev trc,00000] Loading DB library '/usr/sap/DEV/SYS/exe/run/dboraslib.so' ... 153 0.001095
4 ETW000 [ dev trc,00000] DlLoadLib() success: dlopen("/usr/sap/DEV/SYS/exe/run/dboraslib.so"), hdl 0
4 ETW000 76982 0.078077
4 ETW000 [ dev trc,00000] Library '/usr/sap/DEV/SYS/exe/run/dboraslib.so' loaded 145 0.078222
4 ETW000 [ dev trc,00000] function DbSlExpFuns loaded from library /usr/sap/DEV/SYS/exe/run/dboraslib.so
4 ETW000 124 0.078346
4 ETW000 [ dev trc,00000] Version of '/usr/sap/DEV/SYS/exe/run/dboraslib.so' is "700.08", patchlevel (0.324)
4 ETW000 1303 0.079649
4 ETW000 [ dev trc,00000] function dsql_db_init loaded from library /usr/sap/DEV/SYS/exe/run/dboraslib.so
4 ETW000 113 0.079762
4 ETW000 [ dev trc,00000] function dbdd_exp_funs loaded from library /usr/sap/DEV/SYS/exe/run/dboraslib.so
4 ETW000 320 0.080082
4 ETW000 [ dev trc,00000] New connection 0 created 125 0.080207
4 ETW000 [ dev trc,00000] 000: name = R/3, con_id = -000000001, state = DISCONNECTED, tx = NO , hc = NO , perm = YES,
4 ETW000 reco = NO , frco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 174 0.080381
4 ETW000 [ dev trc,00000] db_con_connect (con_name=R/3) 201 0.080582
4 ETW000 [ dev trc,00000] find_con_by_name found the following connection for reuse: 73 0.080655
4 ETW000 [ dev trc,00000] 000: name = R/3, con_id = 000000000, state = DISCONNECTED, tx = NO , hc = NO , perm = YES,
4 ETW000 reco = NO , frco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 164 0.080819
4 ETW000 [ dev trc,00000] -->oci_init1 836 0.081655
4 ETW000 [ dev trc,00000] Oracle Client Version: '10.2.0.2.0', (dbsl 700 131011, non-unicode) 308 0.081963
4 ETW000 [ dev trc,00000] Default connection: tnsname ='DEV' 76 0.082039
4 ETW000 [ dev trc,00000] -->oci_initialize(con=0, char='WE8DEC', nchar='AL16UTF16', uc_ln=1) 129 0.082168
4 ETW000 [ dev trc,00000] Application info callback registered. 76 0.082244
4 ETW000 [ dev trc,00000] OCIEnvCreate(mode=0=OCI_DEFAULT) returned 0 (for default NLS handle)
4 ETW000 14367 0.096611
4 ETW000 [ dev trc,00000] OCIHandleAlloc(OCI_HTYPE_ERROR, con=0, ErrHp=1012d42a0) 162 0.096773
4 ETW000 [ dev trc,00000] OCIHandleAlloc(OCI_HTYPE_ERROR, con=0, ErrBt=1012e4bf8) 109 0.096882
4 ETW000 [ dev trc,00000] NLS env.: lang=414D45524943414E 429 0.097311
4 ETW000 [ dev trc,00000] terr=414D4552494341 86 0.097397
4 ETW000 [ dev trc,00000] char=55544638 76 0.097473
4 ETW000 [ dev trc,00000] Client NLS setting (by OCINlsGetInfo): con=0, 'AMERICAN_AMERICA.UTF8'
4 ETW000 111 0.097584
4 ETW000 [ dev trc,00000] charset='WE8DEC', ncharset='AL16UTF16', UNI_ASC=FALSE 68 0.097652
4 ETW000 [ dev trc,00000] default client setting: NLS_CHAR=charset='UTF8' 71 0.097723
4 ETW000 [ dev trc,00000] Logon as OPS$-user to get SAPSR3's password 123 0.097846
4 ETW000 [ dev trc,00000] Connecting as /@DEV on connection 0 (nls 0) ... (dbsl 700 131011, non-unicode)
4 ETW000 142 0.097988
4 ETW000 [ dev trc,00000] Allocating service context handle for con=0 235 0.098223
4 ETW000 [ dev trc,00000] Allocating server context handle 92 0.098315
4 ETW000 [ dev trc,00000] Attaching to DB Server DEV (con=0,svchp=1012e4b28,srvhp=1012e79c8) 169 0.098484
4 ETW000 [ dev trc,00000] Assigning server context 1012e79c8 to service context 1012e4b28 117845 0.216329
4 ETW000 [ dev trc,00000] Allocating user session handle 145 0.216474
4 ETW000 [ dev trc,00000] Starting user session: OCISessionBegin(con=0, usr='/',svchp=1012e4b28, srvhp=1012e79c8, usrhp=1012d4ab8)
4 ETW000 162 0.216636
4 ETW000 [ dev trc,00000] Assigning user session 1012d4ab8 to service context 1012e4b28 166260 0.382896
4 ETW000 [ dev trc,00000] -->oci_prepare_stmt(con=0, len=52, stp=1012f04e8) 271 0.383167
4 ETW000 [ dev trc,00000] BEGIN DBMS_APPLICATION_INFO.SET_MODULE(:A0,:A1);END;
4 ETW000 124 0.383291
4 ETW000 [ dev trc,00000] - oci_bind ( 0: SQLT_STR, l=300, con=0, stp=1012f04e8, vp=ffffffff7d0934bc,ip=ffffffff7d093340,rlp=0,rcp=0)
4 ETW000 495 0.383786
4 ETW000 [ dev trc,00000] - oci_bind ( 1: SQLT_STR, l=300, con=0, stp=1012f04e8, vp=ffffffff7d093390,ip=ffffffff7d093342,rlp=0,rcp=0)
4 ETW000 211 0.383997
4 ETW000 [ dev trc,00000] CbApplInfoGet() failed (ignored 1). 122 0.384119
4 ETW000 [ dev trc,00000] -->oci_prepare_stmt(con=0, len=54, stp=1012f1540) 80 0.384199
4 ETW000 [ dev trc,00000] BEGIN DBMS_APPLICATION_INFO.SET_CLIENT_INFO(:A0); END;
4 ETW000 116 0.384315
4 ETW000 [ dev trc,00000] - oci_bind ( 0: SQLT_STR, l= 20, con=0, stp=1012f1540, vp=ffffffff7d093344,ip=0,rlp=0,rcp=0)
4 ETW000 206 0.384521
4 ETW000 [ dev trc,00000] -->oci_execute_stmt(con=0, stp=1012f1540, iters=1, rowoff=0, dml_batch_errors=0)
4 ETW000 164 0.384685
4 ETW000 [ dev trc,00000] <--oci_execute_stmt(rc=0, iters-errors = 1-0) [time 0,060s] 59719 0.444404
4 ETW000 [ dev trc,00000] -->oci_prepare_stmt(con=0, len=0, stp=1012f1540) 319 0.444723
4 ETW000 [ dev trc,00000] SELECT SID FROM V$MYSTAT WHERE ROWNUM<2
4 ETW000 125 0.444848
4 ETW000 [ dev trc,00000] -->oci_define ( 0: SQLT_INT, l= 4, con=0, stp=1012f1540, vp=ffffffff7fffee94,ip=ffffffff7fffee56,rlp=0,rcp=0)
4 ETW000 281 0.445129
4 ETW000 [ dev trc,00000] -->oci_execute_stmt(con=0, stp=1012f1540, iters=1, rowoff=0, dml_batch_errors=0)
4 ETW000 224 0.445353
4 ETW000 [ dev trc,00000] Fri Sep 21 19:16:18 2012 54878 0.500231
4 ETW000 [ dev trc,00000] <--oci_execute_stmt(rc=0, iters-errors = 1-0) [time 0,055s] 78 0.500309
4 ETW000 [ dev trc,00000] Now '/@DEV' is connected: con=0, nls_hdl=0, session_id=74. 108 0.500417
4 ETW000 [ dev trc,00000] -->oci_prepare_stmt(con=0, len=0, stp=1012f1540) 128 0.500545
4 ETW000 [ dev trc,00000] ALTER SESSION SET NLS_SORT = BINARY
4 ETW000 121 0.500666
4 ETW000 [ dev trc,00000] -->oci_execute_stmt(con=0, stp=1012f1540, iters=1, rowoff=0, dml_batch_errors=0)
4 ETW000 163 0.500829
4 ETW000 [ dev trc,00000] <--oci_execute_stmt(rc=0, iters-errors = 1-0) [time 0,002s] 2387 0.503216
4 ETW000 [ dev trc,00000] -->oci_prepare_stmt(con=0, len=0, stp=1012f1540) 157 0.503373
4 ETW000 [ dev trc,00000] SELECT USERID,PASSWD FROM SAPUSER WHERE USERID IN (:A0,:A1)
4 ETW000 122 0.503495
4 ETW000 [ dev trc,00000] - oci_bind ( 0: SQLT_STR, l=256, con=0, stp=1012f1540, vp=ffffffff7d1aed74,ip=0,rlp=0,rcp=0)
4 ETW000 226 0.503721
4 ETW000 [ dev trc,00000] - oci_bind ( 1: SQLT_STR, l=256, con=0, stp=1012f1540, vp=ffffffff7fffef40,ip=0,rlp=0,rcp=0)
4 ETW000 131 0.503852
4 ETW000 [ dev trc,00000] -->oci_define ( 0: SQLT_STR, l=256, con=0, stp=1012f1540, vp=ffffffff7fffedd0,ip=ffffffff7ffff042,rlp=0,rcp=0)
4 ETW000 150 0.504002
4 ETW000 [ dev trc,00000] -->oci_define ( 1: SQLT_AFC, l=256, con=0, stp=1012f1540, vp=ffffffff7fffecd0,ip=ffffffff7fffecce,rlp=0,rcp=0)
4 ETW000 155 0.504157
4 ETW000 [ dev trc,00000] -->oci_execute_stmt(con=0, stp=1012f1540, iters=1, rowoff=0, dml_batch_errors=0)
4 ETW000 122 0.504279
4 ETW000 [ dev trc,00000] OCIStmtExecute() failed with -1=OCI_ERROR 4103 0.508382
4 ETW000 [ dev trc,00000] SQL error 942: 76 0.508458
4 ETW000 [ dev trc,00000] ORA-00942: table or view does not exist
4 ETW000 158 0.508616
4 ETW000 [ dev trc,00000] <--oci_execute_stmt(rc=942, iters-errors = 1-0) [time 0,004s] 77 0.508693
4 ETW000 [ dbsloci.,00000] *** ERROR => ORA-942 when accessing table SAPUSER 103 0.508796
4 ETW000 [ dev trc,00000] set_ocica() -> SQL error code 942 79 0.508875
4 ETW000 [ dev trc,00000] -->oci_get_errmsg (con=0, rc=942) 117 0.508992
4 ETW000 [ dev trc,00000] OCIErrorGet -> SQL error code: 942 81 0.509073
4 ETW000 [ dev trc,00000] ORA-00942: table or view does not exist
4 ETW000 115 0.509188
4 ETW000 [ dev trc,00000] Disconnecting from connection 0 ... 90 0.509278
4 ETW000 [ dev trc,00000] Rolling back transaction ... 150 0.509428
4 ETW000 [ dev trc,00000] Closing user session (con=0,svchp=1012e4b28,usrhp=1012d4ab8) 509 0.509937
4 ETW000 [ dev trc,00000] Disconnected (con=0) from ORACLE. 2692 0.512629
4 ETW000 [ dev trc,00000] Info: 99=DBSL_ERR_DB, oerr=942, try to connect with default password.
4 ETW000 153 0.512782
4 ETW000 [ dev trc,00000] Connecting as SAPSR3/<pwd>@DEV on connection 0 (nls 0) ... (dbsl 700 131011, non-unicode)
4 ETW000 114 0.512896
4 ETW000 [ dev trc,00000] Assigning username to user session: con=0, usrhp=1012d4ab8 92 0.512988
4 ETW000 [ dev trc,00000] Assigning password to user session: con=0, usrhp=1012d4ab8 89 0.513077
4 ETW000 [ dev trc,00000] Starting user session: OCISessionBegin(con=0, usr=SAPSR3/<pwd>, svchp=1012e4b28, srvhp=1012e79c8, usrhp=1012d4ab8)
4 ETW000 129 0.513206
4 ETW000 [ dev trc,00000] OCISessionBegin(OCI_DEFAULT) failed with -1=OCI_ERROR 44039 0.557245
4 ETW000 [ dev trc,00000] OCISessionBegin(OCI_DEFAULT) failed with SQL error 1017: 101 0.557346
4 ETW000 [ dev trc,00000] ORA-01017: invalid username/password; logon denied
4 ETW000 117 0.557463
4 ETW000 [ dbsloci.,00000] *** ERROR => CONNECT failed with sql error '1017' 107 0.557570
4 ETW000 [ dev trc,00000] set_ocica() -> SQL error code 1017 74 0.557644
4 ETW000 [ dev trc,00000] -->oci_get_errmsg (con=0, rc=1017) 74 0.557718
4 ETW000 [ dev trc,00000] OCIErrorGet -> SQL error code: 1017 77 0.557795
4 ETW000 [ dev trc,00000] ORA-01017: invalid username/password; logon denied
4 ETW000 114 0.557909
4 ETW000 [ dblink ,00433] ***LOG BY2=>sql error 1017 performing CON [dblink#8 @ 433] 268 0.558177
4 ETW000 [ dblink ,00433] ***LOG BY0=>ORA-01017: invalid username/password; logon denied [dblink#8 @ 433]
4 ETW000 120 0.558297
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'DEV'"
Hi Sujit,
Please check whether database files present in global as well as local path are same or not.
This error is due to mismatched DBSL files in local and global path. Check from profile parameter for correct path of local and global kernel directory. I faced same error 2 days back.
Regards,
Surojit
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Sujit
Please check the ./disp+work from <sidadm> user in both global kernel path as well as local kernel path.
Have you put correct DB SAR file in kernel? Seems some DB kernel files mismatching.
please check dbsl file patch in both directory as well. because error seems to be in oci_execute_stmt which is related to DBSL files.
Regards,
Surojit
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
This is a problem with the OPS$ Users follow SAP Note 400241 - Problems with ops$ or sapr3 connect to Oracle
Regards, Juan
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Juan,
Thank You for your quick response.
As per the note i maintained Parameter "os_authent_prefix= ops$" in initSID.ora parameter file and restarted the database but getting the same error again.
Also checked SAPUSER table exists in the database and OPS$DEVADM User also exists in the database.
Any other suggestions please..
Thanks
Sujit
User | Count |
---|---|
76 | |
9 | |
8 | |
7 | |
6 | |
5 | |
5 | |
5 | |
5 | |
5 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.