File To File

hey guys

i am doing File-to-File scenario and am unable to get the file at receiver end,the file is being picked up properly but i dont see it on receiver side. No error message in

Runtime or SXMB_MONI.

In Runtime workbench message status is successful but I see the Receiver Service is not shown in the table

SAP Managed Tags:
SAP Process Integration

You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.

Comment

Accepted Solutions (0)

Answers (8)

Hi....

Once Check it in communication channel monitoring. If it is ok. Then follow the below steps.

Goto Tcode SICF.

In that just execute. After executing you will get on screen. There Expand Default Hosts.

In That Expand SAP. Again in SAP expand XI. In XI activate all the services.

Now execute your sceanrio.

You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.

Comment

Hi, I have done the cache refresh.. I get the

HTTP response contains status code 401 with the description Unauthorized XML element Envelope missing in SOAP message header error..............

You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.

Comment

Hi,

1) This might cause due to wrong permissions.

2)Try with this Login XIISUSER

3)Tcode SICF -> Default_host -> sap -> xi

( Check right password for the user id )

Regards

Agasthuri Doss

There is no userid and password under this path

Tcode SICF -> Default_host -> sap -> xi

Regards

Mahesh

<b>Select Status Start Sender Party Sender Service Sender Interface Receiver Party

Receiver Service</b>

My Runtime workbench message moni table looks has give above.... I have mapped Receiver Service but it doesn't reflect in it....

You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.

Comment

Hi Goverdhan,

Can you just copy paste your SXMB_MONI msg trace so that i can get more detail on your scenario.........

Thanks,

Rajeev Gupta

<!-- Receiver Identification

-->

- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">

<SAP:Category>XIServer</SAP:Category>

<SAP:Code area="XICACHE">UPDATE</SAP:Code>

<SAP:P1 />

<SAP:P2 />

<SAP:P3 />

<SAP:P4 />

<SAP:AdditionalText>HTTP status code401 Unauthorized</SAP:AdditionalText>

<SAP:ApplicationFaultMessage namespace="" />

<SAP:Stack>An error occurred when refreshing the XI runtime cache</SAP:Stack>

<SAP:Retry>M</SAP:Retry>

</SAP:Error>

...................................................................TRACE.................................

<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

- <!-- Receiver Identification

-->

- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">

<Trace level="1" type="T">Party normalization: sender</Trace>

<Trace level="1" type="T">Sender scheme external = XIParty</Trace>

<Trace level="1" type="T">Sender agency external = http://sap.com/xi/XI</Trace>;

<Trace level="1" type="T">Sender party external =</Trace>

<Trace level="1" type="T">Sender party normalized =</Trace>

<Trace level="1" type="T">Party normalization: receiver</Trace>

<Trace level="1" type="T">Receiver scheme external =</Trace>

<Trace level="1" type="T">Receiver agency external =</Trace>

<Trace level="1" type="T">Receiver party external =</Trace>

<Trace level="1" type="T">Receiver party normalized =</Trace>

- <!-- ************************************

-->

<Trace level="1" type="T">XMB was called with URL /sap/xi/engine?type=entry</Trace>

<Trace level="1" type="T">COMMIT is done by XMB !</Trace>

- <!-- ************************************

-->

- <!-- ************************************

-->

<Trace level="1" type="T">XMB entry processing</Trace>

<Trace level="1" type="T">system-ID = SBW</Trace>

<Trace level="1" type="T">client = 100</Trace>

<Trace level="1" type="T">language = E</Trace>

<Trace level="1" type="T">user = XIAFUSER</Trace>

- <!-- ************************************

-->

<Trace level="1" type="T">Message-GUID = 17A563A1BF5211DB958E02004C4F4F50</Trace>

<Trace level="1" type="T">PLNAME = CENTRAL</Trace>

- <!-- ************************************

-->

<Trace level="1" type="T">Get definition of external pipeline = CENTRAL</Trace>

<Trace level="1" type="T">Get definition of internal pipeline = SAP_CENTRAL</Trace>

<Trace level="1" type="T">Queue name : XBTI0004</Trace>

<Trace level="1" type="T">Generated prefixed queue name = XBTI0004</Trace>

<Trace level="1" type="T">Schedule message in qRFC environment</Trace>

<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>

<Trace level="1" type="T">----

</Trace>

<Trace level="1" type="T">Going to persist message</Trace>

<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>

<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>

<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>

<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>

<Trace level="1" type="T">----

</Trace>

- <!-- ************************************

-->

<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>

- <!-- ************************************

-->

<Trace level="1" type="T">----

</Trace>

<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>

<Trace level="1" type="T">system-ID = SBW</Trace>

<Trace level="1" type="T">client = 100</Trace>

<Trace level="1" type="T">language = E</Trace>

<Trace level="1" type="T">user = XIAFUSER</Trace>

<Trace level="1" type="T">----

</Trace>

- <!-- ************************************

-->

<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>

<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>

- <!-- ************************************

-->

- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">

- <!-- ************************************

-->

- <!-- ************************************

-->

</Trace>

<Trace level="1" type="System_Error">Error exception return from pipeline processing!</Trace>

- <!-- ************************************

-->

</SAP:Trace>

Hi Goverdhan,

Hey u r getting sm HTTP 401 error...thts wht i can see from trace. Did u caheck the log of the cmm channel in the adapter monitoring. Is XI able to communicate with the file system properly. Wht is target file path given in receiver comm channel.

Regards,

Akshay

Now i find following error after fixing the previous error

<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

- <!-- Call Adapter

-->

- <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SAP="http://sap.com/xi/XI/Message/30">

- <SOAP:Header>

- <SAP:Main xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" versionMajor="003" versionMinor="000" SOAP:mustUnderstand="1" wsu:Id="wsuid-main-92ABE13F5C59AB7FE10000000A1551F7">

<SAP:MessageClass>ApplicationMessage</SAP:MessageClass>

<SAP:ProcessingMode>asynchronous</SAP:ProcessingMode>

<SAP:MessageId>05D055E0-BF75-11DB-A3FA-02004C4F4F50</SAP:MessageId>

<SAP:TimeSent>2007-02-18T17:25:26Z</SAP:TimeSent>

- <SAP:Sender>

<SAP:Service>HYD_FTP_BS</SAP:Service>

<SAP:Interface namespace="URN:MS1">ORDER_OUT</SAP:Interface>

</SAP:Sender>

- <SAP:Receiver>

<SAP:Party agency="" scheme="" />

<SAP:Service>SEC_FTP_BS</SAP:Service>

<SAP:Interface namespace="URN:MS1">Bill_IN</SAP:Interface>

</SAP:Receiver>

<SAP:Interface namespace="URN:MS1">Bill_IN</SAP:Interface>

</SAP:Main>

- <SAP:ReliableMessaging xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">

<SAP:QualityOfService>ExactlyOnce</SAP:QualityOfService>

</SAP:ReliableMessaging>

- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">

<SAP:Category>XIServer</SAP:Category>

<SAP:Code area="INTERNAL">HTTP_RESP_STATUS_CODE_NOT_OK</SAP:Code>

<SAP:P1>401</SAP:P1>

<SAP:P2>Unauthorized</SAP:P2>

<SAP:P3 />

<SAP:P4 />

<SAP:AdditionalText><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <html> <head> <title>Error Report</title> <style> td {font-family : Arial, Tahoma, Helvetica, sans-serif; font-size : 14px;} A:link A:visited A:active </style> </head> <body marginwidth="0" marginheight="0" leftmargin="0" topmargin="0" rightmargin="0"> <table width="100%" cellspacing="0" cellpadding="0" border="0" align="left" height="75"> <tr bgcolor="#FFFFFF"> <td align="left" colspan="2" height="48"><font face="Arial, Verdana, Helvetica" size="4" color="#666666"><b>&nbsp;&nbsp;401 &nbsp Unauthorized</b></font></td> </tr> <tr bgcolor="#3F73A3"> <td height="23" width="84"><img width=1 height=1 border=0 alt=""></td> <td height="23"><img width=1 height=1 border=0 alt=""></td> <td align="right" height="23"><font face="Arial, Verdana, Helvetica" size="2" color="#FFFFFF"><b>SAP J2EE Engine/6.40&nbsp;</b></font></td> </tr> <tr bgcolor="#9DCDFD"> <td height="4" colspan="3"><img width=1 height=1 border=0 alt=""></td> </tr> </table> <br><br><br><br><br><br> <p><font face="Arial, Verdana, Helvetica" size="3" color="#000000"><b>&nbsp;&nbsp;Access Denied!</b></font></p> <p><font face="Arial, Verdana, Helvetica" size="2" color="#000000"><table><tr><td valign="top"><b>&nbsp;Details:</b></td><td valign="top"><PRE>No details available</PRE></font></td></tr></table></font></p> </body> </html></SAP:AdditionalText>

<SAP:ApplicationFaultMessage namespace="" />

<SAP:Stack>HTTP response contains status code 401 with the description Unauthorized XML element Envelope missing in SOAP message header (SAP XI Extension)</SAP:Stack>

<SAP:Retry>M</SAP:Retry>

</SAP:Error>

- <SAP:HopList xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">

- <SAP:Hop timeStamp="2007-02-18T17:25:26Z" wasRead="false">

<SAP:Engine type="AE">af.sbw.starxi</SAP:Engine>

<SAP:Adapter namespace="http://sap.com/xi/XI/System">XIRA</SAP:Adapter>

<SAP:MessageId>05D055E0-BF75-11DB-A3FA-02004C4F4F50</SAP:MessageId>

<SAP:Info />

</SAP:Hop>

- <SAP:Hop timeStamp="2007-02-18T17:25:26Z" wasRead="false">

<SAP:Engine type="IS">is.00.starxi</SAP:Engine>

<SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter>

<SAP:MessageId>05D055E0-BF75-11DB-A3FA-02004C4F4F50</SAP:MessageId>

<SAP:Info>3.0</SAP:Info>

</SAP:Hop>

</SAP:HopList>

- <SAP:RunTime xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">

<SAP:Date>20070218</SAP:Date>

<SAP:Time>192553</SAP:Time>

<SAP:Host>starxi</SAP:Host>

<SAP:SystemId>SBW</SAP:SystemId>

<SAP:SystemNr>00</SAP:SystemNr>

<SAP:OS>Windows NT</SAP:OS>

<SAP:DB>ORACLE</SAP:DB>

<SAP:Language />

<SAP:ProcStatus>014</SAP:ProcStatus>

<SAP:AdapterStatus>000</SAP:AdapterStatus>

<SAP:User>XIAFUSER</SAP:User>

<SAP:TraceLevel>1</SAP:TraceLevel>

<SAP:LogSeqNbr>002</SAP:LogSeqNbr>

<SAP:RetryLogSeqNbr>000</SAP:RetryLogSeqNbr>

<SAP:PipelineIdInternal>SAP_CENTRAL</SAP:PipelineIdInternal>

<SAP:PipelineIdExternal>CENTRAL</SAP:PipelineIdExternal>

<SAP:PipelineElementId>60C3C53B4BB7B62DE10000000A1148F5</SAP:PipelineElementId>

<SAP:PipelineStartElementId>5EC3C53B4BB7B62DE10000000A1148F5</SAP:PipelineStartElementId>

<SAP:PipelineService>PLSRV_CALL_ADAPTER</SAP:PipelineService>

<SAP:QIdInternal>XBTO____0000</SAP:QIdInternal>

<SAP:CommitActor>X</SAP:CommitActor>

<SAP:SplitNumber>0</SAP:SplitNumber>

<SAP:NumberOfRetries>0</SAP:NumberOfRetries>

<SAP:NumberOfManualRetries>0</SAP:NumberOfManualRetries>

<SAP:TypeOfEngine client="100">CENTRAL</SAP:TypeOfEngine>

<SAP:PlsrvExceptionCode />

<SAP:EOReferenceRuntime type="TID">C0A80C0108C845D88C20000C</SAP:EOReferenceRuntime>

<SAP:EOReferenceInbound type="TID" />

<SAP:EOReferenceOutbound type="TID" />

<SAP:MessageSizePayload>216</SAP:MessageSizePayload>

<SAP:MessageSizeTotal>2457</SAP:MessageSizeTotal>

<SAP:PayloadSizeRequest>216</SAP:PayloadSizeRequest>

<SAP:PayloadSizeRequestMap>160</SAP:PayloadSizeRequestMap>

<SAP:PayloadSizeResponse>0</SAP:PayloadSizeResponse>

<SAP:PayloadSizeResponseMap>0</SAP:PayloadSizeResponseMap>

<SAP:Reorganization>INI</SAP:Reorganization>

<SAP:AdapterInbound>XIRA</SAP:AdapterInbound>

<SAP:AdapterOutbound>AENGINE</SAP:AdapterOutbound>

<SAP:RandomNumber>43</SAP:RandomNumber>

<SAP:AckStatus>000</SAP:AckStatus>

<SAP:SkipReceiverDetermination />

</SAP:RunTime>

- <SAP:PerformanceHeader xmlns:SAP="http://sap.com/xi/XI/Message/30">

- <SAP:RunTimeItem>

<SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>

<SAP:Timestamp type="begin" host="starxi">20070218172526.828</SAP:Timestamp>

</SAP:RunTimeItem>

- <SAP:RunTimeItem>

<SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>

<SAP:Timestamp type="end" host="starxi">20070218172526.843</SAP:Timestamp>

</SAP:RunTimeItem>

- <SAP:RunTimeItem>

<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>

<SAP:Timestamp type="begin" host="starxi">20070218172526.843</SAP:Timestamp>

</SAP:RunTimeItem>

- <SAP:RunTimeItem>

<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>

<SAP:Timestamp type="end" host="starxi">20070218172526.843</SAP:Timestamp>

</SAP:RunTimeItem>

- <SAP:RunTimeItem>

<SAP:Name type="DBQUEUE">DB_ENTRY_QUEUING</SAP:Name>

<SAP:Timestamp type="begin" host="starxi">20070218172526.843</SAP:Timestamp>

</SAP:RunTimeItem>

- <SAP:RunTimeItem>

<SAP:Name type="DBQUEUE">DB_ENTRY_QUEUING</SAP:Name>

<SAP:Timestamp type="end" host="starxi">20070218172526.89</SAP:Timestamp>

</SAP:RunTimeItem>

- <SAP:RunTimeItem>

<SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>

<SAP:Timestamp type="begin" host="starxi">20070218172526.89</SAP:Timestamp>

</SAP:RunTimeItem>

- <SAP:RunTimeItem>

<SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>

<SAP:Timestamp type="end" host="starxi">20070218172530.781</SAP:Timestamp>

</SAP:RunTimeItem>

- <SAP:RunTimeItem>

<SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>

<SAP:Timestamp type="begin" host="starxi">20070218172530.781</SAP:Timestamp>

</SAP:RunTimeItem>

- <SAP:RunTimeItem>

<SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>

<SAP:Timestamp type="end" host="starxi">20070218172535.859</SAP:Timestamp>

</SAP:RunTimeItem>

- <SAP:RunTimeItem>

<SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>

<SAP:Timestamp type="begin" host="starxi">20070218172535.859</SAP:Timestamp>

</SAP:RunTimeItem>

- <SAP:RunTimeItem>

<SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>

<SAP:Timestamp type="end" host="starxi">20070218172551.937</SAP:Timestamp>

</SAP:RunTimeItem>

- <SAP:RunTimeItem>

<SAP:Name type="DBQUEUE">DB_SPLITTER_QUEUING</SAP:Name>

<SAP:Timestamp type="begin" host="starxi">20070218172551.937</SAP:Timestamp>

</SAP:RunTimeItem>

- <SAP:RunTimeItem>

<SAP:Name type="DBQUEUE">DB_SPLITTER_QUEUING</SAP:Name>

<SAP:Timestamp type="end" host="starxi">20070218172553.187</SAP:Timestamp>

</SAP:RunTimeItem>

- <SAP:RunTimeItem>

<SAP:Name type="PLSRV">PLSRV_MAPPING_REQUEST</SAP:Name>

<SAP:Timestamp type="begin" host="starxi">20070218172553.187</SAP:Timestamp>

</SAP:RunTimeItem>

- <SAP:RunTimeItem>

<SAP:Name type="PLSRV">PLSRV_MAPPING_REQUEST</SAP:Name>

<SAP:Timestamp type="end" host="starxi">20070218172555.656</SAP:Timestamp>

</SAP:RunTimeItem>

- <SAP:RunTimeItem>

<SAP:Name type="PLSRV">PLSRV_OUTBOUND_BINDING</SAP:Name>

<SAP:Timestamp type="begin" host="starxi">20070218172555.656</SAP:Timestamp>

</SAP:RunTimeItem>

- <SAP:RunTimeItem>

<SAP:Name type="PLSRV">PLSRV_OUTBOUND_BINDING</SAP:Name>

<SAP:Timestamp type="end" host="starxi">20070218172557.187</SAP:Timestamp>

</SAP:RunTimeItem>

- <SAP:RunTimeItem>

<SAP:Name type="PLSRV">PLSRV_CALL_ADAPTER</SAP:Name>

<SAP:Timestamp type="begin" host="starxi">20070218172557.187</SAP:Timestamp>

</SAP:RunTimeItem>

</SAP:PerformanceHeader>

- <SAP:Diagnostic xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">

<SAP:TraceLevel>Information</SAP:TraceLevel>

<SAP:Logging>Off</SAP:Logging>

</SAP:Diagnostic>

- <SAP:OutboundBinding xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">

- <SAP:OutboundBindingEntry version="30">

<SAP:OutboundBindingObjectId>F4F8F081A4533CB9B038632E9C39F475</SAP:OutboundBindingObjectId>

<SAP:FromPartyName />

<SAP:FromServiceName>HYD_FTP_BS</SAP:FromServiceName>

<SAP:ToPartyName />

<SAP:ToServiceName>SEC_FTP_BS</SAP:ToServiceName>

<SAP:ToInterfaceName>Bill_IN</SAP:ToInterfaceName>

<SAP:ToInterfaceNamespace>URN:MS1</SAP:ToInterfaceNamespace>

- <SAP:OutboundBindingAttributes>

<SAP:AdapterTypeData xmlns:SAP="http://sap.com/xi/XI/Message/30" />

</SAP:OutboundBindingAttributes>

- <SAP:HeaderMapping>

<SAP:FieldMapping xmlns:SAP="http://sap.com/xi/XI/Message/30" />

</SAP:HeaderMapping>

- <SAP:ChannelEntry version="30">

<SAP:PartyName xmlns:SAP="http://sap.com/xi/XI/Message/30" />

<SAP:ServiceName xmlns:SAP="http://sap.com/xi/XI/Message/30">SEC_FTP_BS</SAP:ServiceName>

<SAP:ChannelName xmlns:SAP="http://sap.com/xi/XI/Message/30">Bill_CC</SAP:ChannelName>

<SAP:AdapterName xmlns:SAP="http://sap.com/xi/XI/Message/30">File</SAP:AdapterName>

<SAP:AdapterNamespace xmlns:SAP="http://sap.com/xi/XI/Message/30">http://sap.com/xi/XI/System</SAP:AdapterNamespace>

<SAP:AdapterSWCV xmlns:SAP="http://sap.com/xi/XI/Message/30">3B787A8035C111D6BBE0EFE50A1145A5</SAP:AdapterSWCV>

<SAP:AdapterEngineType xmlns:SAP="http://sap.com/xi/XI/Message/30">AE</SAP:AdapterEngineType>

<SAP:AdapterEngineName xmlns:SAP="http://sap.com/xi/XI/Message/30">af.sbw.starxi</SAP:AdapterEngineName>

<SAP:MessageProtocol xmlns:SAP="http://sap.com/xi/XI/Message/30">File</SAP:MessageProtocol>

<SAP:MessageProtocolVersion xmlns:SAP="http://sap.com/xi/XI/Message/30">3.0.0527</SAP:MessageProtocolVersion>

<SAP:TransportProtocol xmlns:SAP="http://sap.com/xi/XI/Message/30">File</SAP:TransportProtocol>

<SAP:TransportProtocolVersion xmlns:SAP="http://sap.com/xi/XI/Message/30" />

<SAP:ChannelDirection xmlns:SAP="http://sap.com/xi/XI/Message/30">O</SAP:ChannelDirection>

<SAP:FromPartyAgency xmlns:SAP="http://sap.com/xi/XI/Message/30" />

<SAP:FromPartySchema xmlns:SAP="http://sap.com/xi/XI/Message/30" />

<SAP:ToPartySchema xmlns:SAP="http://sap.com/xi/XI/Message/30" />

<SAP:ToPartyAgency xmlns:SAP="http://sap.com/xi/XI/Message/30" />

- <SAP:ChannelAttributes xmlns:SAP="http://sap.com/xi/XI/Message/30">

<SAP:AdapterTypeData xmlns:SAP="http://sap.com/xi/XI/Message/30" />

</SAP:ChannelAttributes>

</SAP:ChannelEntry>

</SAP:OutboundBindingEntry>

</SAP:OutboundBinding>

- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">

<Trace level="1" type="T">Party normalization: sender</Trace>

<Trace level="1" type="T">Sender scheme external = XIParty</Trace>

<Trace level="1" type="T">Sender agency external = http://sap.com/xi/XI</Trace>;

<Trace level="1" type="T">Sender party external =</Trace>

<Trace level="1" type="T">Sender party normalized =</Trace>

<Trace level="1" type="T">Party normalization: receiver</Trace>

<Trace level="1" type="T">Receiver scheme external =</Trace>

<Trace level="1" type="T">Receiver agency external =</Trace>

<Trace level="1" type="T">Receiver party external =</Trace>

<Trace level="1" type="T">Receiver party normalized =</Trace>

- <!-- ************************************

-->

<Trace level="1" type="T">XMB was called with URL /sap/xi/engine?type=entry</Trace>

<Trace level="1" type="T">COMMIT is done by XMB !</Trace>

- <!-- ************************************

-->

- <!-- ************************************

-->

<Trace level="1" type="T">XMB entry processing</Trace>

<Trace level="1" type="T">system-ID = SBW</Trace>

<Trace level="1" type="T">client = 100</Trace>

<Trace level="1" type="T">language = E</Trace>

<Trace level="1" type="T">user = XIAFUSER</Trace>

- <!-- ************************************

-->

<Trace level="1" type="T">Message-GUID = 05D055E0BF7511DBA3FA02004C4F4F50</Trace>

<Trace level="1" type="T">PLNAME = CENTRAL</Trace>

- <!-- ************************************

-->

<Trace level="1" type="T">Get definition of external pipeline = CENTRAL</Trace>

<Trace level="1" type="T">Get definition of internal pipeline = SAP_CENTRAL</Trace>

<Trace level="1" type="T">Queue name : XBTI0005</Trace>

<Trace level="1" type="T">Generated prefixed queue name = XBTI0005</Trace>

<Trace level="1" type="T">Schedule message in qRFC environment</Trace>

<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>

<Trace level="1" type="T">----

</Trace>

<Trace level="1" type="T">Going to persist message</Trace>

<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>

<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>

<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>

<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>

<Trace level="1" type="T">----

</Trace>

- <!-- ************************************

-->

<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>

- <!-- ************************************

-->

<Trace level="1" type="T">----

</Trace>

<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>

<Trace level="1" type="T">system-ID = SBW</Trace>

<Trace level="1" type="T">client = 100</Trace>

<Trace level="1" type="T">language = E</Trace>

<Trace level="1" type="T">user = XIAFUSER</Trace>

<Trace level="1" type="T">----

</Trace>

- <!-- ************************************

-->

<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>

<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>

- <Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION">

- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">

- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">

- <Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">

<Trace level="1" type="T">Cache Content is up to date</Trace>

</Trace>

- <Trace level="1" type="B" name="PLSRV_INTERFACE_DETERMINATION">

- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">

- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">

- <Trace level="1" type="B" name="CL_ID_PLSRV-ENTER_PLSRV">

<Trace level="1" type="T">Cache Content is up to date</Trace>

</Trace>

- <!-- ************************************

-->

- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">

- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">

- <!-- ************************************

-->

<Trace level="1" type="T">number of receivers: 1</Trace>

<Trace level="1" type="T">Single-receiver split case</Trace>

<Trace level="1" type="T">Post-split internal queue name = XBTO____0000</Trace>

<Trace level="1" type="T">----

</Trace>

<Trace level="1" type="T">Persisting single message for post-split handling</Trace>

<Trace level="1" type="T">Going to persist message + call qRFC now...</Trace>

<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>

<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>

<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>

<Trace level="1" type="T">----

</Trace>

- <!-- ************************************

-->

<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>

- <!-- ************************************

-->

<Trace level="1" type="T">----

</Trace>

<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>

<Trace level="1" type="T">system-ID = SBW</Trace>

<Trace level="1" type="T">client = 100</Trace>

<Trace level="1" type="T">language = E</Trace>

<Trace level="1" type="T">user = XIAFUSER</Trace>

<Trace level="1" type="T">----

</Trace>

- <!-- ************************************

-->

<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>

<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>

<Trace level="1" type="T">Start with pipeline element PLEL= 5EC3C53B4BB7B62DE10000000A1148F5</Trace>

- <Trace level="1" type="B" name="PLSRV_MAPPING_REQUEST">

- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">

- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">

- <Trace level="1" type="B" name="CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV">

<Trace level="1" type="T">Interface Mapping URN:MS1 ORDER_BILL_IM</Trace>

</Trace>

- <Trace level="1" type="B" name="PLSRV_OUTBOUND_BINDING">

- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">

- <!-- ************************************

-->

- <Trace level="1" type="B" name="CL_XMS_PLSRV_OUTBINDING-ENTER_PLSRV">

<Trace level="1" type="T">processing the outbound binding</Trace>

<Trace level="1" type="T">search outbound bindings</Trace>

<Trace level="1" type="T">outbound bindings found</Trace>

</Trace>

- <!-- ************************************

-->

- <!-- ************************************

-->

- <!-- ************************************

-->

- <Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">

- <Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP">

<Trace level="1" type="System_Error">HTTP-client: error response= <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <html> <head> <title>Error Report</title> <style> td {font-family : Arial, Tahoma, Helvetica, sans-serif; font-size : 14px;} A:link A:visited A:active </style> </head> <body marginwidth="0" marginheight="0" leftmargin="0" topmargin="0" rightmargin="0"> <table width="100%" cellspacing="0" cellpadding="0" border="0" align="left" height="75"> <tr bgcolor="#FFFFFF"> <td align="left" colspan="2" height="48"><font face="Arial, Verdana, Helvetica" size="4" color="#666666"><b>  401 &nbsp Unauthorized</b></font></td> </tr> <tr bgcolor="#3F73A3"> <td height="23" width="84"><img width=1 height=1 border=0 alt=""></td> <td height="23"><img width=1 height=1 border=0 alt=""></td> <td align="right" height="23"><font face="Arial, Verdana, Helvetica" size="2" color="#FFFFFF"><b>SAP J2EE Engine/6.40 </b></font></td> </tr> <tr bgcolor="#9DCDFD"> <td height="4" colspan="3"><img width=1 height=1 border=0 alt=""></td> </tr> </table> <br><br><br><br><br><br> <p><font face="Arial, Verdana, Helvetica" size="3" color="#000000"><b>  Access Denied!</b></font></p> <p><font face="Arial, Verdana, Helvetica" size="2" color="#000000"><table><tr><td valign="top"><b> Details:</b></td><td valign="top"><PRE>No details available</PRE></font></td></tr></table></font></p> </body> </html></Trace>

</Trace>

<Trace level="1" type="System_Error">Error exception return from pipeline processing!</Trace>

- <!-- ************************************

-->

</SAP:Trace>

</SOAP:Header>

- <SOAP:Body>

- <SAP:Manifest xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="wsuid-manifest-5CABE13F5C59AB7FE10000000A1551F7">

- <SAP:Payload xlink:href="cid:payload-05d2c6e1bf7511db835702004c4f4f50@sap.com">

<SAP:Name>MainDocument</SAP:Name>

<SAP:Description />

<SAP:Type>Application</SAP:Type>

</SAP:Payload>

</SAP:Manifest>

</SOAP:Body>

</SOAP:Envelope>

Goverdhan,

Can you just do a complete cache refresh as shown in this docuemnt:

https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1a69ea11-0d01-0010-fa80-b47a7930...

Once you do this then please test once again whether you are having the same issue or not?

---Satish

Hi Goverdhan,

just check whether you have activated your receiver comm channel......in RWB, just see in component monitoring->adapter monitoring->file is there any error in your receiver comm channel.........if there is error, what error is it.........

Thanks,

Rajeev Gupta

You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.

Comment

Hi ,

Check the log in End to end log in RWB(Runtime work bench).

Nanda

You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.

Comment

Hi,

did you check messaging system ?

http://server:port/MessagingSystem/monitor/monitor.jsp

Regards,

michal

You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.

Comment

Hi,

Check in Component monitoring~~-> Adapter engine~~>CC monitoring. Check for receiver file communication channel.

Regards,

Sudheer.

You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.

Comment

What system you use...When i did this scenario, my file system was on XI server on unix and i used program in windows system to connect to unix system and to see unix file system. And i didn't see new file till press f5 in this program

You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.

Comment

Ask a Question

Top Q&A Solution Author

User

Count

File To File

Accepted Solutions (0)

Answers (8)

Answers (8)

Why html_repo_runtime is added in the resources se...

Re: Deploy Fiori Freestyle App to Cloud Foundry - ...

Re: SAP BO 4.3 Cloud: Error - The document has bee...

Re: How to get the FIRST Date in a date column

Re: SAP Cloud ALM - Granular Authorization to Scop...