Tables for MIC fields

[Former Member]

Hi all

I am trying to check the tables for the following fields:

TOLERUNTEN

TOLEROBEN

SOLLPRUEF

PRUEFKAT

STICHPR

RZWANG4

RZWANG1

FEHLREC

DOKUKZ2

Can anyone give me their fields? All I see is the structure RQMST. I need their tables

[Former Member · Accepted solution]

From QPMK you can pick control indicator ,which has values as follows

SCOPE_IND: Inspection scope

" " Unrestricted inspection scope

"<" Smaller inspection scope permitted

">" Larger inspection scope permitted

"=" Fixed inspection scope

RESULT_RECORDING_TYPE: Recording type

"-" No recording

"*" Classed recording

"+" Single recording

" " Summarized recording

DOCU_REQU: Documentation required for inspection results

" " No documentation required

"." Documentation required

"+" Document all inspection results

CONFIRMATION_CATEGORY Characteristic category

" " Optional characteristic

"+" Required for the acceptance of the previous required characteristic

"-" Required for the rejection of the previous required characteristic

"X" Required characteristic

PRINT_IND: Print control

" " Print

"x" Do not print

"*" No print at skip

[Former Member · Accepted solution]

Hi Sujit

Table QMPK does not exist. I think you mean QPMK. Also I don't think this helps me. My clients need the transparent tables of these fields. They will be mapping the fields for data upload by a different group

What I need are the tables of the fields themselves in SAP

[Former Member · Accepted solution]

Sory for typo error.

There is not direct table exists for the same.Its saved in structure.

[Former Member · Accepted solution]

I found a post where it said that the fields are maintained in field STEUERKZ in QPMK table. I tried looking into it and it seems like the field displays all the inputs done with the fields above. Can STEUERKZ help with my mapping?

[Former Member · Accepted solution]

Dear ...You have not read my initial reply correctly.It is same.You will get solution from said field on QPMK which I said in initial reply.

[Former Member · Accepted solution]

Ok. But you said in one of your replies that there are no direct tables for these fields. You said that they are saved in structures. So which one is correct, no tables only structure or QPMK table?

[Former Member · Accepted solution]

Okk...

I am still saying there is no direct table.

In QPMK you will get something like XXX""=XX etc.

You have to derive from this what are values for conrol indicators in sequence given in my last thread.

this is what i want to tell you !