on 06-28-2012 10:01 PM
Dear Friends,
We are working with GRC AC 10.0 SP8
We have created the single role in BRM but when going to create an access request we are not able to see the previously created role
we thought it was a synchronization problem and so we ran the sync jobs from SPRO, but after the sync the role still does not appear.
thanks in advance
kind regards
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Luis,
You can only see the Role in Access Request if you have :
1. Role is imported and present in the system
2. Role Status is set as 'Production'
3. The Provisioning is set to YES. (Path Open the role, Under Additional Options->Provisioning->Provisioning Allowed set it to "YES")
If all the above three things are there then you should be able to search the role in the Access Request.
Regards,
Shaily
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Luis,
Please refer to the following note:-
1712810 - GRC 10.0 - Role are not visible in Access Request
1666087 - Unable to view Roles in Access Request even when the status of roles is set to Production in BRM
I hope this helps.
Regards,
Yukti
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.