on 05-01-2012 8:09 AM
Hello Guys ,
I need to configure RFC in my Solution manager 7.1 to start using " snote " .
Please i need your help guys .
Andrea ,
I need to ask you something ,
The server is under domain but not registered in active directory , is it ok or not , because now i`ve just remembered that the previous server was under domain and also registered in active directory !
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
it seems still a communication issue.
Can you confirm me please that now from sap operating command prompt the telnet 10.0.0.216 3299 and telnet 10.0.0.216 3399 answer you without errors?
As Lata Borannavar mentioned previously, can you check if saprouter executable is up&running on your saprouter?
Did you configure your saprouttab file?
a
Dear Andrea ,
Thank you very much for your support and patient .
It`s pinging to 194.39.131.34 like this :
Reply from 194.39.131.34: bytes=32 time=183ms TTL=240
Reply from 194.39.131.34: bytes=32 time=155ms TTL=240
Reply from 194.39.131.34: bytes=32 time=173ms TTL=240
Reply from 194.39.131.34: bytes=32 time=179ms TTL=240
Ping statistics for 194.39.131.34:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 155ms, Maximum = 183ms, Average = 172ms
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
thank you all for your support , but unfortunately its not working untill now ,,
by the way i`m using the same sap-router license of previous server , is it OK or not , but the IP still the same !!??
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi,
It is same for all the SAP System, you need to configure SAPOSS RFC for this.
it is the post installation step, most propably its done already, goto sm59 check do you have SAPOSS rfc. if not goto tcode oss1 and maintain it.
http://help.sap.com/saphelp_nwes70/helpdata/en/a0/39389c1b794e6685d0550a8acd4161/content.htm
follow the step by step instructions here on blog
Thanks,
Jansi
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
it's strange that you don't find it
btw go to sm59 and configure the rfc with following details :
TAB Tech Settings
RFC Destination - SAPOSS
Connection Type - 3 (ABAP Connection)
Load Balancing - yes
Target System - OSS
Msg. Server - /H/<your saprouter>/S/sapdp99/H/194.39.131.34/S/sapdp99/H/oss001 (for example with sapserv2)
Group - EWA
TAB Logon&Sec
Trusted System - No
Language - EN
User - OSS_RFC
Password - CPIC
Let me know
a
hello andrea ,
its pinging on 10.0.0.216 , but after " telnet 10.0.0.216 3299 " , this message occurred :
≥NI_RTERR' ┌*ERR*1connection timed out-5NI (network interface)71039nirout.cpp674
2RTPENDLIST::timeoutPend: no route received within 60s (CONNECTED)Tue May 01 15:
18:30 201218SAProuter 39.3 (SP4) on 'SOLMAN'*ERR*
Connection to host lost.
rami,
that's not good
I have the feeling that there is a firewall role between solman and saprouter that doesn't allow this communication. Can you ask to you network support to check if the ports 3299 and 3399 are open?
let me know if u need more support and i will give you my gmail
good luck
a
User | Count |
---|---|
98 | |
11 | |
11 | |
10 | |
10 | |
8 | |
6 | |
5 | |
4 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.