on 02-08-2007 8:12 AM
Hi,
I am on ERP2005 SR2, with Windows 2003 and MSSQL 2005 DB.
I have recently performed a database restore of the SAP database, but I am not able to restart SAP after this.
The dispatcher dies after about 1 minute. You will find the dev_disp and dev_w0 files below:
dev_disp file:
-
trc file: "dev_disp", trc level: 1, release: "700"
-
sysno 00
sid T01
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 83
intno 20050900
make: multithreaded, ASCII, 64 bit, optimized
pid 4204
Thu Feb 08 09:02:37 2007
kernel runs with dp version 218(ext=109) (@(#) DPLIB-INT-VERSION-218)
length of sys_adm_ext is 360 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 4204) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 83 successfully loaded
shared lib "dw_xtc.dll" version 83 successfully loaded
shared lib "dw_stl.dll" version 83 successfully loaded
shared lib "dw_gui.dll" version 83 successfully loaded
shared lib "dw_mdm.dll" version 83 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Thu Feb 08 09:02:41 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5277]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >sapr3s_T01_00 <
DpShMCreate: sizeof(wp_adm) 11648 (896)
DpShMCreate: sizeof(tm_adm) 4663200 (23200)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552048/552064
DpShMCreate: sizeof(comm_adm) 552064 (1088)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1496)
DpShMCreate: sizeof(wall_adm) (25648/36736/64/104)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000BDA0050, size: 5320400)
DpShMCreate: allocated sys_adm at 000000000BDA0050
DpShMCreate: allocated wp_adm at 000000000BDA1AB0
DpShMCreate: allocated tm_adm_list at 000000000BDA4830
DpShMCreate: allocated tm_adm at 000000000BDA4890
DpShMCreate: allocated wp_ca_adm at 000000000C217030
DpShMCreate: allocated appc_ca_adm at 000000000C21B680
DpShMCreate: allocated comm_adm at 000000000C21CDF0
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000C2A3A70
DpShMCreate: allocated gw_adm at 000000000C2A3AF0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000C2A3B20
DpShMCreate: allocated wall_adm at 000000000C2A3B30
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
Thu Feb 08 09:02:42 2007
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( sapr3s) [dpxxdisp.c 11644]
DpStartStopMsg: send start message (myname is >sapr3s_T01_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 83
Release check o.K.
Thu Feb 08 09:03:22 2007
ERROR => W0 (pid 4732) died [dpxxdisp.c 14299]
ERROR => W1 (pid 2544) died [dpxxdisp.c 14299]
ERROR => W2 (pid 412) died [dpxxdisp.c 14299]
ERROR => W3 (pid 4944) died [dpxxdisp.c 14299]
ERROR => W4 (pid 2760) died [dpxxdisp.c 14299]
ERROR => W5 (pid 1004) died [dpxxdisp.c 14299]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W6 (pid 4104) died [dpxxdisp.c 14299]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W7 (pid 2208) died [dpxxdisp.c 14299]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W8 (pid 3300) died [dpxxdisp.c 14299]
ERROR => W9 (pid 3312) died [dpxxdisp.c 14299]
ERROR => W10 (pid 4412) died [dpxxdisp.c 14299]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W11 (pid 4112) died [dpxxdisp.c 14299]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W12 (pid 4336) died [dpxxdisp.c 14299]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:32 2007
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Thu Feb 08 08:03:32 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
-
0 DIA 4732 Ended no 1 0 0
1 DIA 2544 Ended no 1 0 0
2 DIA 412 Ended no 1 0 0
3 DIA 4944 Ended no 1 0 0
4 DIA 2760 Ended no 1 0 0
5 DIA 1004 Ended no 1 0 0
6 UPD 4104 Ended no 1 0 0
7 ENQ 2208 Ended no 1 0 0
8 BTC 3300 Ended no 1 0 0
9 BTC 3312 Ended no 1 0 0
10 BTC 4412 Ended no 1 0 0
11 SPO 4112 Ended no 1 0 0
12 UP2 4336 Ended no 1 0 0
Dispatcher Queue Statistics Thu Feb 08 08:03:32 2007
===========================
--------
+
Typ | now | high | max | writes | reads |
--------
+
NOWP | 0 | 2 | 2000 | 5 | 5 |
--------
+
DIA | 5 | 5 | 2000 | 5 | 0 |
--------
+
UPD | 0 | 0 | 2000 | 0 | 0 |
--------
+
ENQ | 0 | 0 | 2000 | 0 | 0 |
--------
+
BTC | 0 | 0 | 2000 | 0 | 0 |
--------
+
SPO | 0 | 0 | 2000 | 0 | 0 |
--------
+
UP2 | 0 | 0 | 2000 | 0 | 0 |
--------
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 6 ( 75%), shm 2 ( 25%)
since last update total 8, udp 6 ( 75%), shm 2 ( 25%)
Dump of tm_adm structure: Thu Feb 08 08:03:32 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Thu Feb 08 08:03:32 2007
=============================
Slots: 300, Used: 1, Max: 0
--------
+
id | owner | pid | eyecatcher |
--------
+
0 | DISPATCHER | -1 | WPCAAD000 |
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:37 2007
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >sapr3s_T01_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (2584) (SOFT_KILL)
Stop icman
killing process (4720) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:2584 HANDLE:516)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:38 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2584 HANDLE:516)
wait for end of icman
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:39 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:40 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:41 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:42 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:43 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:44 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:45 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:46 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:47 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:48 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:49 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:4720 HANDLE:528)
DpStartStopMsg: send stop message (myname is >sapr3s_T01_00 <)
NiIMyHostName: hostname = 'sapr3s'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Thu Feb 08 09:03:50 2007
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11957]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 452 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 452 (pos=2)
SiSelNRemove: removed sock 452
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 452
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 4204) [dpxxdisp.c 10317]
Good Bye .....
DEV_W0 file:
-
trc file: "dev_w0", trc level: 1, release: "700"
-
*
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
*
B
B Thu Feb 08 09:02:42 2007
B create_con (con_name=R/3)
B Loading DB library 'F:\usr\sap\T01\DVEBMGS00\exe\dbmssslib.dll' ...
B Library 'F:\usr\sap\T01\DVEBMGS00\exe\dbmssslib.dll' loaded
B Version of 'F:\usr\sap\T01\DVEBMGS00\exe\dbmssslib.dll' is "700.08", patchlevel (0.81)
B New connection 0 created
M sysno 00
M sid T01
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 83
M intno 20050900
M make: multithreaded, ASCII, 64 bit, optimized
M pid 4732
M
M kernel runs with dp version 218(ext=109) (@(#) DPLIB-INT-VERSION-218)
M length of sys_adm_ext is 360 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 4732) [dpxxdisp.c 1301]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 11648 (896)
M DpShMCreate: sizeof(tm_adm) 4663200 (23200)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552048/552064
M DpShMCreate: sizeof(comm_adm) 552064 (1088)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1496)
M DpShMCreate: sizeof(wall_adm) (25648/36736/64/104)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000DDA0050, size: 5320400)
M DpShMCreate: allocated sys_adm at 000000000DDA0050
M DpShMCreate: allocated wp_adm at 000000000DDA1AB0
M DpShMCreate: allocated tm_adm_list at 000000000DDA4830
M DpShMCreate: allocated tm_adm at 000000000DDA4890
M DpShMCreate: allocated wp_ca_adm at 000000000E217030
M DpShMCreate: allocated appc_ca_adm at 000000000E21B680
M DpShMCreate: allocated comm_adm at 000000000E21CDF0
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000000E2A3A70
M DpShMCreate: allocated gw_adm at 000000000E2A3AF0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000000E2A3B20
M DpShMCreate: allocated wall_adm at 000000000E2A3B30
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Thu Feb 08 09:02:43 2007
M ThInit: running on host sapr3s
M
M Thu Feb 08 09:02:44 2007
M calling db_connect ...
C Thread ID:2008
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'F:\usr\sap\T01\DVEBMGS00\exe\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 81
C patchcomment Connection check on (0,0) (988711)
C np:(local) connection used on SAPR3S
C CopyLocalParameters: dbuser is 't01'
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 't01' setuser 't01']
C sloledb.cpp [ExecuteAndFlush,line 6419]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 't01' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
C Procname: [ExecuteAndFlush - no proc]
C setuser 't01' failed -- connect terminated
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 't01' setuser 't01']
C sloledb.cpp [ExecuteAndFlush,line 6419]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 't01' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
C Procname: [ExecuteAndFlush - no proc]
C setuser 't01' failed -- connect terminated
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 't01' setuser 't01']
C sloledb.cpp [ExecuteAndFlush,line 6419]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 't01' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
C Procname: [ExecuteAndFlush - no proc]
C setuser 't01' failed -- connect terminated
C failed to establish conn to np:(local).
C Retrying without protocol specifier: (local)
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 't01' setuser 't01']
C sloledb.cpp [ExecuteAndFlush,line 6419]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 't01' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
C Procname: [ExecuteAndFlush - no proc]
C setuser 't01' failed -- connect terminated
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 't01' setuser 't01']
C sloledb.cpp [ExecuteAndFlush,line 6419]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 't01' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
C Procname: [ExecuteAndFlush - no proc]
C setuser 't01' failed -- connect terminated
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 't01' setuser 't01']
C sloledb.cpp [ExecuteAndFlush,line 6419]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 't01' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
C Procname: [ExecuteAndFlush - no proc]
C setuser 't01' failed -- connect terminated
C failed to establish conn. 0
B ***LOG BY2=> sql error 0 performing CON [dbsh#2 @ 1204] [dbsh 1204 ]
B ***LOG BY0=> <message text not available> [dbsh#2 @ 1204] [dbsh 1204 ]
B ***LOG BY2=> sql error 0 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> <message text not available> [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1411]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10205]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server sapr3s_T01_00 on host sapr3s (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Thu Feb 08 09:02:44 2007
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10404
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 4732) [dpnttool.c 327]
Please let me know what to do!
Best Regards,
Thomas
See SAP Note # 551915. It describes a similar situation.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi!
Check that all enviroment variables are complete and still in place?
JAVA_HOME and DBMS_TYPE and so on
Also check that all exe files are of the same version, if not, make sure they are.
You could also try to update disp+work
rollo
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
93 | |
10 | |
10 | |
9 | |
9 | |
7 | |
6 | |
5 | |
5 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.